| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Information exposure through microarchitectural state after transient execution in certain vector execution units for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access. |
| An improperly performed length calculation on a buffer in PlaintextRecordLayer could lead to an infinite loop and denial-of-service based on user input. This issue affected versions of fizz prior to v2019.03.04.00. |
| There is a denial of service vulnerability in the Content-Disposition parsingcomponent of Rack fixed in 2.0.9.2, 2.1.4.2, 2.2.4.1, 3.0.0.1. This could allow an attacker to craft an input that can cause Content-Disposition header parsing in Rackto take an unexpected amount of time, possibly resulting in a denial ofservice attack vector. This header is used typically used in multipartparsing. Any applications that parse multipart posts using Rack (virtuallyall Rails applications) are impacted. |
| A denial of service vulnerability in the Range header parsing component of Rack >= 1.5.0. A Carefully crafted input can cause the Range header parsing component in Rack to take an unexpected amount of time, possibly resulting in a denial of service attack vector. Any applications that deal with Range requests (such as streaming applications, or applications that serve files) may be impacted. |
| A denial of service vulnerability in the multipart parsing component of Rack fixed in 2.0.9.2, 2.1.4.2, 2.2.4.1 and 3.0.0.1 could allow an attacker tocraft input that can cause RFC2183 multipart boundary parsing in Rack to take an unexpected amount of time, possibly resulting in a denial of service attack vector. Any applications that parse multipart posts using Rack (virtually all Rails applications) are impacted. |
| Use of externally-controlled format string vulnerability in mPOS TUI trustlet prior to SMR May-2023 Release 1 allows local attackers to access the memory address. |
| NETGEAR ProSAFE Network Management System Default Credentials Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of NETGEAR ProSAFE Network Management System. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.
The specific flaw exists within the product installer. The issue results from the use of default MySQL credentials. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-22755. |
| Improper Control of Generation of Code ('Code Injection'), Cross-Site Request Forgery (CSRF), : Improper Neutralization of Special Elements Used in a Template Engine vulnerability in Apache OFBiz.
This issue affects Apache OFBiz: before 18.12.17.
Users are recommended to upgrade to version 18.12.17, which fixes the issue. |
| TP-Link L2 switch T2600G-28SQ firmware versions prior to 'T2600G-28SQ(UN)_V1_1.0.6 Build 20230227' uses vulnerable SSH host keys. A fake device may be prepared to spoof the affected device with the vulnerable host key.If the administrator may be tricked to login to the fake device, the credential information for the affected device may be obtained. |
| Void Tools Everything lower than v1.4.1.1022 was discovered to contain a Regular Expression Denial of Service (ReDoS). |
| All versions of the package safe-eval are vulnerable to Prototype Pollution via the safeEval function, due to improper sanitization of its parameter content. |
| All versions of the package safe-eval are vulnerable to Sandbox Bypass due to improper input sanitization. The vulnerability is derived from prototype pollution exploitation.
Exploiting this vulnerability might result in remote code execution ("RCE").
**Vulnerable functions:**
__defineGetter__, stack(), toLocaleString(), propertyIsEnumerable.call(), valueOf(). |
| An Improper Handling of Length Parameter Inconsistency vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a network based, unauthenticated attacker to cause an RPD crash leading to a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. Upon receipt of a malformed BGP flowspec update, RPD will crash resulting in a Denial of Service. This issue affects Juniper Networks Junos OS: All versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R1-S1, 20.3R2; Juniper Networks Junos OS Evolved: All versions prior to 20.1R3-EVO; 20.2 versions prior to 20.2R2-EVO; 20.3 versions prior to 20.3R2-EVO; |
| An Improperly Controlled Sequential Memory Allocation vulnerability in the Juniper Networks Deep Packet Inspection-Decoder (JDPI-Decoder) Application Signature component of Junos OS's AppID service on SRX Series devices will stop the JDPI-Decoder from identifying dynamic application traffic, allowing an unauthenticated network-based attacker to send traffic to the target device using the JDPI-Decoder, designed to inspect dynamic application traffic and take action upon this traffic, to instead begin to not take action and to pass the traffic through. An example session can be seen by running the following command and evaluating the output. user@device# run show security flow session source-prefix <address/mask> extensive Session ID: <session ID>, Status: Normal, State: Active Policy name: <name of policy> Dynamic application: junos:UNKNOWN, <<<<< LOOK HERE Please note, the JDPI-Decoder and the AppID SigPack are both affected and both must be upgraded along with the operating system to address the matter. By default, none of this is auto-enabled for automatic updates. This issue affects: Juniper Networks any version of the JDPI-Decoder Engine prior to version 5.7.0-47 with the JDPI-Decoder enabled using any version of the AppID SigPack prior to version 1.550.2-31 (SigPack 3533) on Junos OS on SRX Series: All versions prior to 19.1R3-S10; 19.2 versions prior to 19.2R3-S7; 19.3 versions prior to 19.3R3-S8; 19.4 versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2; |
| Server-side Template Injection (SSTI) in Shopware 6 (<= v6.4.20.0, v6.5.0.0-rc1 <= v6.5.0.0-rc4), affecting both shopware/core and shopware/platform GitHub repositories, allows remote attackers with access to a Twig environment without the Sandbox extension to bypass the validation checks in `Shopware\Core\Framework\Adapter\Twig\SecurityExtension` and call any arbitrary PHP function and thus execute arbitrary code/commands via usage of fully-qualified names, supplied as array of strings, when referencing callables. Users are advised to upgrade to v6.4.20.1 to resolve this issue. This is a bypass of CVE-2023-22731.
|
| es5-ext contains ECMAScript 5 extensions. Passing functions with very long names or complex default argument names into `function#copy` or `function#toStringTokens` may cause the script to stall. The vulnerability is patched in v0.10.63. |
| SheetJS Community Edition before 0.19.3 allows Prototype Pollution via a crafted file. In other words. 0.19.2 and earlier are affected, whereas 0.19.3 and later are unaffected. |
| RIOT-OS, an operating system that supports Internet of Things devices, contains a network stack with the ability to process 6LoWPAN frames. Prior to version 2022.10, an attacker can send a crafted frame to the device resulting in an out of bounds write in the packet buffer. The overflow can be used to corrupt other packets and the allocator metadata. Corrupting a pointer will easily lead to denial of service. While carefully manipulating the allocator metadata gives an attacker the possibility to write data to arbitrary locations and thus execute arbitrary code. Version 2022.10 fixes this issue. As a workaround, disable support for fragmented IP datagrams or apply the patches manually. |
| Use of default password vulnerability in PowerPanel Business Local/Remote for Windows v4.8.6 and earlier, PowerPanel Business Management for Windows v4.8.6 and earlier, PowerPanel Business Local/Remote for Linux 32bit v4.8.6 and earlier, PowerPanel Business Local/Remote for Linux 64bit v4.8.6 and earlier, PowerPanel Business Management for Linux 32bit v4.8.6 and earlier, PowerPanel Business Management for Linux 64bit v4.8.6 and earlier, PowerPanel Business Local/Remote for MacOS v4.8.6 and earlier, and PowerPanel Business Management for MacOS v4.8.6 and earlier allows remote attackers to log in to the server directly to perform administrative functions. Upon installation or upon first login, the application does not ask the user to change the 'admin' password. |
| Excessive attack surface in acep-collector service due to binding to an unrestricted IP address. The following products are affected: Acronis Cyber Protect 16 (Linux, Windows) before build 38690. |
