| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Authorization Bypass Through User-Controlled Key in GitHub repository cloudexplorer-dev/cloudexplorer-lite prior to v1.1.0. |
| PostgreSQL Anonymizer v1.2 contains a SQL injection vulnerability that allows a user who owns a table to elevate to superuser when dynamic masking is enabled. PostgreSQL Anonymizer enables users to set security labels on tables to mask specified columns. There is a flaw that allows complex expressions to be provided as a value. This expression is then later used as it to create the masked views leading to SQL Injection. If dynamic masking is enabled, this will lead to privilege escalation to superuser after the label is created. Users that don't own a table, especially masked users cannot exploit this vulnerability. The problem is resolved in v1.3. |
| PostgreSQL Anonymizer v1.2 contains a vulnerability that allows a user who owns a table to elevate to superuser. A user can define a masking function for a column and place malicious code in that function. When a privileged user applies the masking rules using the static masking or the anonymous dump method, the malicious code is executed and can grant escalated privileges to the malicious user. PostgreSQL Anonymizer v1.2 does provide a protection against this risk with the restrict_to_trusted_schemas option, but that protection is incomplete. Users that don't own a table, especially masked users cannot exploit this vulnerability. The problem is resolved in v1.3. |
| Cross-site Scripting (XSS) - Stored in GitHub repository nilsteampassnet/teampass prior to 3.0.7. |
| A vulnerability classified as problematic has been found in Netgear SRX5308 up to 4.3.5-3. This affects an unknown part of the component Web Management Interface. The manipulation of the argument Login.userAgent leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-227673 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| The configuration parser of Zyxel ATP series firmware versions 5.10 through 5.35, USG FLEX series firmware versions 5.00 through 5.35, USG FLEX 50(W) firmware versions 5.10 through 5.35, USG20(W)-VPN firmware versions 5.10 through 5.35, and VPN series firmware versions 5.00 through 5.35, which fails to properly sanitize user input. A remote unauthenticated attacker could leverage the vulnerability to modify device configuration data, resulting in DoS conditions on an affected device if the attacker could trick an authorized administrator to switch the management mode to the cloud mode. |
| Potential buffer overflow vulnerability in mm_Plmncoordination.c in Shannon baseband prior to SMR May-2023 Release 1 allows remote attackers to cause invalid memory access. |
| Potential buffer overflow vulnerability in mm_LteInterRatManagement.c in Shannon baseband prior to SMR May-2023 Release 1 allows remote attackers to cause invalid memory access. |
| Improper input validation vulnerability in FactoryTest application prior to SMR May-2023 Release 1 allows local attackers to get privilege escalation via debugging commands. |
| Improper input validation vulnerability in mPOS fiserve trustlet prior to SMR May-2023 Release 1 allows local attackers to execute arbitrary code. |
| Metabase is an open source business analytics engine. To edit SQL Snippets, Metabase should have required people to be in at least one group with native query editing permissions to a database–but affected versions of Metabase didn't enforce that requirement. This lack of enforcement meant that: Anyone–including people in sandboxed groups–could edit SQL snippets. They could edit snippets via the API or, in the application UI, when editing the metadata for a model based on a SQL question, and people in sandboxed groups could edit a SQL snippet used in a query that creates their sandbox. If the snippet contained logic that restricted which data that person could see, they could potentially edit that snippet and change their level of data access. The permissions model for SQL snippets has been fixed in Metabase versions 0.46.3, 0.45.4, 0.44.7, 1.46.3, 1.45.4, and 1.44.7. Users are advised to upgrade. Users unable to upgrade should ensure that SQL queries used to create sandboxes exclude SQL snippets. |
| Craft CMS is an open source content management system. In affected versions of Craft CMS an unrestricted file extension may lead to Remote Code Execution. If the name parameter value is not empty string('') in the View.php's doesTemplateExist() -> resolveTemplate() -> _resolveTemplateInternal() -> _resolveTemplate() function, it returns directly without extension verification, so that arbitrary extension files are rendered as twig templates. When attacker with admin privileges on a DEV or an improperly configured STG or PROD environment, they can exploit this vulnerability to remote code execution. Code execution may grant the attacker access to the host operating system. This issue has been addressed in version 4.4.6. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Zulip is an open-source team collaboration tool with unique topic-based threading. Zulip administrators can configure Zulip to limit who can add users to streams, and separately to limit who can invite users to the organization. In Zulip Server 6.1 and below, the UI which allows a user to invite a new user also allows them to set the streams that the new user is invited to -- even if the inviting user would not have permissions to add an existing user to streams. While such a configuration is likely rare in practice, the behavior does violate security-related controls. This does not let a user invite new users to streams they cannot see, or would not be able to add users to if they had that general permission. This issue has been addressed in version 6.2. Users are advised to upgrade. Users unable to upgrade may limit sending of invitations down to users who also have the permission to add users to streams. |
| Vyper is a pythonic Smart Contract Language for the ethereum virtual machine. In contracts with more than one regular nonpayable function, it is possible to send funds to the default function, even if the default function is marked `nonpayable`. This applies to contracts compiled with vyper versions prior to 0.3.8. This issue was fixed by the removal of the global `calldatasize` check in commit `02339dfda`. Users are advised to upgrade to version 0.3.8. Users unable to upgrade should avoid use of nonpayable default functions. |
| Cross-site Scripting (XSS) - Stored in GitHub repository nilsteampassnet/teampass prior to 3.0.9. |
| Vyper is a Pythonic Smart Contract Language for the ethereum virtual machine. In versions 0.3.1 through 0.3.7, the Vyper compiler generates the wrong bytecode. Any contract that uses the `raw_call` with `revert_on_failure=False` and `max_outsize=0` receives the wrong response from `raw_call`. Depending on the memory garbage, the result can be either `True` or `False`. A patch is available and, as of time of publication, anticipated to be part of Vyper 0.3.8. As a workaround, one may always put `max_outsize>0`. |
| Kiwi TCMS is an open source test management system. In kiwitcms/Kiwi v12.2 and prior and kiwitcms/enterprise v12.2 and prior,
the `changelog.yml` workflow is vulnerable to command injection attacks because of using an untrusted `github.head_ref` field. The `github.head_ref` value is an attacker-controlled value. Assigning the value to `zzz";echo${IFS}"hello";#` can lead to command injection. Since the permission is not restricted, the attacker has a write-access to the repository. Commit 834c86dfd1b2492ccad7ebbfd6304bfec895fed2 of the kiwitcms/Kiwi repository and commit e39f7e156fdaf6fec09a15ea6f4e8fec8cdbf751 of the kiwitcms/enterprise repository contain a fix for this issue. |
| jellyfin-web is the web client for Jellyfin, a free-software media system. Starting in version 10.1.0 and prior to version 10.8.10, a stored cross-site scripting vulnerability in device.js can be used to make arbitrary calls to the `REST` endpoints with admin privileges. When combined with CVE-2023-30626, this results in remote code execution on the Jellyfin instance in the context of the user who's running it. This issue is patched in version 10.8.10. There are no known workarounds. |
| Jellyfin is a free-software media system. Versions starting with 10.8.0 and prior to 10.8.10 and prior have a directory traversal vulnerability inside the `ClientLogController`, specifically `/ClientLog/Document`. When combined with a cross-site scripting vulnerability (CVE-2023-30627), this can result in file write and arbitrary code execution. Version 10.8.10 has a patch for this issue. There are no known workarounds. |
| `embano1/wip` is a GitHub Action written in Bash. Prior to version 2, the `embano1/wip` action uses the `github.event.pull_request.title` parameter in an insecure way. The title parameter is used in a run statement - resulting in a command injection vulnerability due to string interpolation. This vulnerability can be triggered by any user on GitHub. They just need to create a pull request with a commit message containing an exploit. (Note that first-time PR requests will not be run - but the attacker can submit a valid PR before submitting an invalid PR). The commit can be genuine, but the commit message can be malicious. This can be used to execute code on the GitHub runners and can be used to exfiltrate any secrets used in the CI pipeline, including repository tokens. Version 2 has a fix for this issue. |
