| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Handling of Length Parameter Inconsistency vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a network based, unauthenticated attacker to cause an RPD crash leading to a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. Upon receipt of a malformed BGP flowspec update, RPD will crash resulting in a Denial of Service. This issue affects Juniper Networks Junos OS: All versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R1-S1, 20.3R2; Juniper Networks Junos OS Evolved: All versions prior to 20.1R3-EVO; 20.2 versions prior to 20.2R2-EVO; 20.3 versions prior to 20.3R2-EVO; |
| An Improper Check or Handling of Exceptional Conditions within the storm control feature of Juniper Networks Junos OS allows an attacker sending a high rate of traffic to cause a Denial of Service. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. Storm control monitors the level of applicable incoming traffic and compares it with the level specified. If the combined level of the applicable traffic exceeds the specified level, the switch drops packets for the controlled traffic types. This issue affects Juniper Networks Junos OS on QFX10002: All versions prior to 19.3R3-S7; 19.4 versions prior to 19.4R3-S11; 20.2 versions prior to 20.2R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2. |
| An Incorrect Permission Assignment for Critical Resource vulnerability in Juniper Networks Junos OS Evolved allows a local, authenticated low-privileged attacker to copy potentially malicious files into an existing Docker container on the local system. A follow-on administrator could then inadvertently start the Docker container leading to the malicious files being executed as root. This issue only affects systems with Docker configured and enabled, which is not enabled by default. Systems without Docker started are not vulnerable to this issue. This issue affects Juniper Networks Junos OS Evolved: 20.4 versions prior to 20.4R3-S5-EVO; 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R3-EVO; 21.4 versions prior to 21.4R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved versions prior to 19.2R1-EVO. |
| An Incorrect Default Permissions vulnerability in Juniper Networks Junos OS Evolved allows a low-privileged local attacker with shell access to modify existing files or execute commands as root. The issue is caused by improper file and directory permissions on certain system files, allowing an attacker with access to these files and folders to inject CLI commands as root. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S5-EVO; 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R2-EVO. |
| An Improperly Controlled Sequential Memory Allocation vulnerability in the Juniper Networks Deep Packet Inspection-Decoder (JDPI-Decoder) Application Signature component of Junos OS's AppID service on SRX Series devices will stop the JDPI-Decoder from identifying dynamic application traffic, allowing an unauthenticated network-based attacker to send traffic to the target device using the JDPI-Decoder, designed to inspect dynamic application traffic and take action upon this traffic, to instead begin to not take action and to pass the traffic through. An example session can be seen by running the following command and evaluating the output. user@device# run show security flow session source-prefix <address/mask> extensive Session ID: <session ID>, Status: Normal, State: Active Policy name: <name of policy> Dynamic application: junos:UNKNOWN, <<<<< LOOK HERE Please note, the JDPI-Decoder and the AppID SigPack are both affected and both must be upgraded along with the operating system to address the matter. By default, none of this is auto-enabled for automatic updates. This issue affects: Juniper Networks any version of the JDPI-Decoder Engine prior to version 5.7.0-47 with the JDPI-Decoder enabled using any version of the AppID SigPack prior to version 1.550.2-31 (SigPack 3533) on Junos OS on SRX Series: All versions prior to 19.1R3-S10; 19.2 versions prior to 19.2R3-S7; 19.3 versions prior to 19.3R3-S8; 19.4 versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2; |
| An Improper Check or Handling of Exceptional Conditions vulnerability in packet processing on the network interfaces of Juniper Networks Junos OS on JRR200 route reflector appliances allows an adjacent, network-based attacker sending a specific packet to the device to cause a kernel crash, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue can only be triggered by an attacker on the local broadcast domain. Packets routed to the device are unable to trigger this crash. This issue affects Juniper Networks Junos OS on JRR200: All versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S4; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S2, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2; 22.4 versions prior to 22.4R1-S1, 22.4R2. |
| An Improper Restriction of Communication Channel to Intended Endpoints vulnerability in the timescaledb feature of Juniper Networks Paragon Active Assurance (PAA) (Formerly Netrounds) allows an attacker to bypass existing firewall rules and limitations used to restrict internal communcations. The Test Agents (TA) Appliance connects to the Control Center (CC) using OpenVPN. TA's are assigned an internal IP address in the 100.70.0.0/16 range. Firewall rules exists to limit communication from TA's to the CC to specific services only. OpenVPN is configured to not allow direct communication between Test Agents in the OpenVPN application itself, and routing is normally not enabled on the server running the CC application. The timescaledb feature is installed as an optional package on the Control Center. When the timescaledb container is started, this causes side-effects by bypassing the existing firewall rules and limitations for Test Agent communications. Note: This issue only affects customers hosting their own on-prem Control Center. The Paragon Active Assurance Software as a Service (SaaS) is not affected by this vulnerability since the timescaledb service is not enabled. This issue affects all on-prem versions of Juniper Networks Paragon Active Assurance prior to 4.1.2. |
| An Improper Authorization vulnerability in the 'sysmanctl' shell command of Juniper Networks Junos OS Evolved allows a local, authenticated attacker to execute administrative commands that could impact the integrity of the system or system availability. Administrative functions such as daemon restarting, routing engine (RE) switchover, and node shutdown can all be performed through exploitation of the 'sysmanctl' command. Access to the 'sysmanctl' command is only available from the Junos shell. Neither direct nor indirect access to 'sysmanctl' is available from the Junos CLI. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S5-EVO; 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R2-EVO; 21.4 versions prior to 21.4R1-S2-EVO, 21.4R2-EVO. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the bbe-smgd of Juniper Networks Junos OS allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS). In a Broadband Edge / Subscriber Management scenario on MX Series when a specifically malformed ICMP packet addressed to the device is received from a subscriber the bbe-smgd will crash, affecting the subscriber sessions that are connecting, updating, or terminating. Continued receipt of such packets will lead to a sustained DoS condition. When this issue happens the below log can be seen if the traceoptions for the processes smg-service are enabled: BBE_TRACE(TRACE_LEVEL_INFO, "%s: Dropped unsupported ICMP PKT ... This issue affects Juniper Networks Junos OS on MX Series: All versions prior to 19.4R3-S11; 20.2 versions prior to 20.2R3-S7; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S2; 22.1 versions prior to 22.1R2-S2, 22.1R3; 22.2 versions prior to 22.2R2; 22.3 versions prior to 22.3R1-S2, 22.3R2. |
| The 'Visforms Base Package for Joomla 3' extension is vulnerable to SQL Injection as concatenation is used to construct an SQL Query. An attacker can interact with the database and could be able to read, modify and delete data on it. |
| An issue in the action_listcategories() function of Sangoma Asterisk v22/22.0.0/22.0.0-rc1/22.0.0-rc2/22.0.0-pre1 allows attackers to execute a path traversal. |
| A memory leak in the Silicon Labs' Bluetooth stack for EFR32 products may cause memory to be exhausted when sending notifications to multiple clients, this results in all Bluetooth operations, such as advertising and scanning, to stop. |
| Misskey is an open source, decentralized social media platform with ActivityPub support. Prior to version 2024.2.0, when fetching remote Activity Streams objects, Misskey doesn't check that the response from the remote server has a `Content-Type` header value of the Activity Streams media type, which allows a threat actor to upload a crafted Activity Streams document to a remote server and make a Misskey instance fetch it, if the remote server accepts arbitrary user uploads. The vulnerability allows a threat actor to impersonate and take over an account on a remote server that satisfies all of the following properties: allows the threat actor to register an account; accepts arbitrary user-uploaded documents and places them on the same domain as legitimate Activity Streams actors; and serves user-uploaded document in response to requests with an `Accept` header value of the Activity Streams media type. Version 2024.2.0 contains a patch for the issue. |
| Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Brivo ACS100, ACS300 allows OS Command Injection, Bypassing Physical Security.This issue affects ACS100 (Network Adjacent Access), ACS300 (Physical Access): from 5.2.4 before 6.2.4.3.
|
| kedi ElectronCord is a bot management tool for Discord. Commit aaaeaf4e6c99893827b2eea4dd02f755e1e24041 exposes an account access token in the `config.json` file. Malicious actors could potentially exploit this vulnerability to gain unauthorized access to sensitive information or perform malicious actions on behalf of the repository owner. As of time of publication, it is unknown whether the owner of the repository has rotated the token or taken other mitigation steps aside from informing users of the situation. |
| com.yetanalytics/lrs is the Yet Analytics Core LRS Library. Prior to version 1.2.17 of the LRS library and version 0.7.5 of SQL LRS, a maliciously crafted xAPI statement could be used to perform script or other tag injection in the LRS Statement Browser. The problem is patched in version 1.2.17 of the LRS library and version 0.7.5 of SQL LRS. No known workarounds exist. |
| `discourse-microsoft-auth` is a plugin that enables authentication via Microsoft. On sites with the `discourse-microsoft-auth` plugin enabled, an attack can potentially take control of a victim's Discourse account. Sites that have configured their application's account type to any options other than `Accounts in this organizational directory only (O365 only - Single tenant)` are vulnerable. This vulnerability has been patched in commit c40665f44509724b64938c85def9fb2e79f62ec8 of `discourse-microsoft-auth`. A `microsoft_auth:revoke` rake task has also been added which will deactivate and log out all users that have connected their accounts to Microsoft. User API keys as well as API keys created by those users will also be revoked. The rake task will also remove the connection records to Microsoft for those users. This will allow affected users to re-verify their account emails as well as reconnect their Discourse account to Microsoft for authentication. As a workaround, disable the `discourse-microsoft-auth` plugin by setting the `microsoft_auth_enabled` site setting to `false`. Run the `microsoft_auth:log_out_users` rake task to log out all users with associated Microsoft accounts.
|
| Pymatgen (Python Materials Genomics) is an open-source Python library for materials analysis. A critical security vulnerability exists in the `JonesFaithfulTransformation.from_transformation_str()` method within the `pymatgen` library prior to version 2024.2.20. This method insecurely utilizes `eval()` for processing input, enabling execution of arbitrary code when parsing untrusted input. Version 2024.2.20 fixes this issue. |
| php-svg-lib is a scalable vector graphics (SVG) file parsing/rendering library. Prior to version 0.5.2, php-svg-lib fails to validate that font-family doesn't contain a PHAR url, which might leads to RCE on PHP < 8.0, and doesn't validate if external references are allowed. This might leads to bypass of restrictions or RCE on projects that are using it, if they do not strictly revalidate the fontName that is passed by php-svg-lib. The `Style::fromAttributes(`), or the `Style::parseCssStyle()` should check the content of the `font-family` and prevents it to use a PHAR url, to avoid passing an invalid and dangerous `fontName` value to other libraries. The same check as done in the `Style::fromStyleSheets` might be reused. Libraries using this library as a dependency might be vulnerable to some bypass of restrictions, or even remote code execution, if they do not double check the value of the `fontName` that is passed by php-svg-lib. Version 0.5.2 contains a fix for this issue. |
| cryptography is a package designed to expose cryptographic primitives and recipes to Python developers. Starting in version 38.0.0 and prior to version 42.0.4, if `pkcs12.serialize_key_and_certificates` is called with both a certificate whose public key did not match the provided private key and an `encryption_algorithm` with `hmac_hash` set (via `PrivateFormat.PKCS12.encryption_builder().hmac_hash(...)`, then a NULL pointer dereference would occur, crashing the Python process. This has been resolved in version 42.0.4, the first version in which a `ValueError` is properly raised. |
