Search vulnerabilities

Results 430,582

CVE-2026-99471

KVM: PPC: Book3S HV: Add SRCU protection for virtual-mode HPT hcalls

In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Add SRCU protection for virtual-mode HPT hcalls The virtual-mode HPT hcall handlers (H_ENTER, H_REMOVE, H_BULK_REMOVE, H_CLEAR_REF, H_CLEAR_MOD) call into book3s_hv_rm_mmu.c, which accesses memslots via kvm_memslots_raw(). kvm_memslots_raw() uses rcu_dereference_raw_check() to bypass SRCU lockdep annotation checking. This is safe in real mode because the entire guest entry/exit is wrapped in srcu_read_lock/unlock inside kvmppc_run_core() and kvmhv_run_single_vcpu(). However, since commit 6165d5dd99db ("KVM: PPC: Book3S HV: add virtual mode handlers for HPT hcalls and page faults"), these same handlers are also executed in virtual mode via kvmppc_pseries_do_hcall(), which runs after SRCU has already been released on guest exit. A concurrent KVM_SET_USER_MEMORY_REGION deletion or move can therefore call synchronize_srcu_expedited() — which does not wait for this thread — and then kfree(slot) and vfree(slot->arch.rmap) while the hcall handler still holds a raw pointer to the memslot. lock_rmap() then writes to freed vmalloc memory, leading to use-after-free and memory corruption. Because kvm_memslots_raw() suppresses lockdep checks, this race is entirely silent. Fix this by factoring out the 7 HPT hcall handlers (H_REMOVE, H_ENTER, H_READ, H_CLEAR_MOD, H_CLEAR_REF, H_PROTECT, H_BULK_REMOVE) into a helper function, kvmppc_pseries_do_hpt_hcall(), and wrapping its call site in srcu_read_lock(&kvm->srcu) / srcu_read_unlock(&kvm->srcu, idx). Targeting only the HPT hcalls avoids wrapping non-HPT hcalls that sleep (such as H_CONFER, H_REGISTER_VPA, H_PAGE_INIT) or handlers that already acquire SRCU internally (such as H_RTAS).

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99468

media: imx-jpeg: cancel timeout worker when streaming stops

In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: cancel timeout worker when streaming stops Each per-fd context ctx owns a delayed_work (ctx->task_timer, callback mxc_jpeg_device_run_timeout) armed via schedule_delayed_work() at the end of mxc_jpeg_device_run() to recover a stalled encode/decode job. The only existing cancellation is cancel_delayed_work() in the frame-done IRQ handler, which de-queues a pending work item but does not wait for a callback that has already started, and it only runs when a frame completes. When the fd is closed while a job is in flight (the frame-done IRQ has not fired yet), nothing syncs the worker before mxc_jpeg_release() frees ctx with kfree() after v4l2_m2m_ctx_release(). A queued or executing mxc_jpeg_device_run_timeout() can then recover ctx through container_of(&ctx->task_timer) and dereference it (ctx->mxc_jpeg, slot_data, dev_warn) after ctx has been freed. Cancel the worker from mxc_jpeg_stop_streaming(). The cancel cannot live in mxc_jpeg_release(): mxc_jpeg_device_run() arms the timer while holding only hw_lock, not the mxc_jpeg->lock mutex that release holds, so a cancel in release could still race a concurrent mxc_jpeg_device_run() that re-arms the timer afterwards. mxc_jpeg_stop_streaming() instead runs inside v4l2_m2m_ctx_release() -> vb2_queue_release(), i.e. after v4l2_m2m_cancel_job() has set TRANS_ABORT and waited for any in-flight job to finish (so __v4l2_m2m_try_queue() will not queue and v4l2_m2m_try_run() will not run any further job for this context, which prevents mxc_jpeg_device_run() from re-arming the timer) and before the m2m context is freed. cancel_delayed_work_sync() removes a pending work item and waits for a running callback, so the worker can no longer race with the subsequent kfree(). The cancel is placed before the buffer-release loop so a concurrently running timeout callback cannot race with it over the same buffers. If the frame-done IRQ canceled a still-pending timer, this cancel is a no-op; if the timeout callback has already started, it waits for the callback to finish. The same mxc_jpeg_stop_streaming() call is also reached from VIDIOC_STREAMOFF, which drains the worker early, although STREAMOFF itself does not free ctx -- the use-after-free arises only when the fd is later closed. This bug was found by static analysis.

CVSS 3.1 · 7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99462

mm/truncate: look up the end-edge straddler by index

In the Linux kernel, the following vulnerability has been resolved: mm/truncate: look up the end-edge straddler by index In truncate_inode_partial_folio(), after the first split at the start edge, folio_split() unlocks and drops the refcount of the after-split sub-folios. The sub-folio straddling the end of the truncation range is therefore unlocked and only transiently ref'd in the page cache while the code still derives it from a page pointer inside the original folio. Between the first split finishing and page_folio() resolving split_at2, that tail page can be reclaimed, freed and reallocated as a new large folio in the same mapping at a different file offset. folio2 then points at a folio that does not cover the end boundary, yet folio2->mapping == folio->mapping still holds, so the stale pointer passes the mapping check and folio_split_or_unmap() splits a folio at a wrong position (or, with a transient refcount, a use-after-free window opens between try_get and the split). __folio_split()'s own folio != page_folio(split_at) check cannot catch this either since split_at2 has been reallocated as part of the new folio, so page_folio(split_at2) resolves back to folio2. Look the straddler up by its page index instead. __filemap_get_folio() returns the folio currently covering the boundary, ref'd and locked, with the mapping validated under the lock, so the split target is always the real folio at the end edge.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99460

mptcp: hold MP_JOIN msk ref when cloning reqsk

In the Linux kernel, the following vulnerability has been resolved: mptcp: hold MP_JOIN msk ref when cloning reqsk TCP request migration clones pending request sockets with inet_reqsk_clone(). For MPTCP MP_JOIN requests this byte-copies subflow_req->msk, but the clone does not own a reference. The original and cloned requests can consequently drop the same msk reference, leaving one request with a dangling pointer. This manifests as a KASAN slab-use-after-free in subflow_req_destructor(): BUG: KASAN: slab-use-after-free in subflow_req_destructor (net/mptcp/subflow.c:45) Write of size 4 at addr ff1100010e008d40 by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc5-00353-gc27e36054537 #10 PREEMPT(full) Call Trace: subflow_req_destructor (net/mptcp/subflow.c:45) subflow_v4_req_destructor (net/mptcp/subflow.c:694) __reqsk_free (net/ipv4/inet_connection_sock.c:906) reqsk_timer_handler (include/net/request_sock.h:137 net/ipv4/inet_connection_sock.c:1147) Allocated by task 10014: sk_prot_alloc (net/core/sock.c:2246) sk_clone (net/core/sock.c:2488) mptcp_sk_clone_init (include/net/sock.h:1848 net/mptcp/protocol.c:3564) subflow_syn_recv_sock (net/mptcp/subflow.c:883) tcp_check_req (net/ipv4/tcp_minisocks.c:934) Freed by task 0: slab_free_after_rcu_debug (include/linux/kasan.h:235 mm/slub.c:2677 mm/slub.c:6439) rcu_core (kernel/rcu/tree.c:2645 kernel/rcu/tree.c:2897) Last potentially related work creation: kmem_cache_free (mm/slub.c:2638 mm/slub.c:6377 mm/slub.c:6504) __sk_destruct (net/core/sock.c:2289 net/core/sock.c:2391) sk_destruct (net/core/sock.c:2419) __sk_free (net/core/sock.c:2430) sk_free (net/core/sock.c:2441) mptcp_close (include/net/sock.h:2020 net/mptcp/protocol.c:3399) inet_release (net/ipv4/af_inet.c:442) The buggy address belongs to the cache MPTCP of size 2968 The buggy address is 128 bytes inside a freed 2968-byte region A non-NULL subflow_req->msk means that the request owns one reference. The third ACK can concurrently transfer the original request reference to the child and release it, so taking an unconditional hold on the copied pointer is unsafe. MPTCP sockets use SLAB_TYPESAFE_BY_RCU and all current inet_reqsk_clone() callers run in an RCU read-side critical section. Document and lockdep-check that calling-context requirement. Read the pointer from the original request and acquire a reference only if it is still live. Use refcount_inc_not_zero_acquire() so the subsequent ownership validation cannot be reordered before the try-get, then re-read the original request to verify that it still owns the same msk. If either check fails, clear the clone pointer; otherwise its normal destructor balances the new reference. Mark the ownership-transfer store with WRITE_ONCE() to match the lockless reads. The following patch completes the clone fixup for MP_CAPABLE token ownership. Both patches carry the same Fixes tag and are required for stable backports.

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99457

net: sched: prevent scheduling deactivated qdiscs

In the Linux kernel, the following vulnerability has been resolved: net: sched: prevent scheduling deactivated qdiscs TAPRIO can schedule a deactivated qdisc after some_qdisc_is_busy() has reported it idle. Commit 47e8dbb6e763 ("net/sched: do not reset queues in graft operations") made graft deactivation skip queue reset, leaving TAPRIO's timer armed. A late callback schedules NET_TX softirq work, whose dequeue path can race the unlocked child-queue reset in taprio_reset(). The same skb can be queued for deferred freeing by RTNL and dequeued for transmission. In the reproducer, the TAP reader frees it before __rtnl_unlock() reads its next pointer. KASAN reports a slab-use-after-free in __rtnl_unlock+0xa3/0xd0, with a read of size 8 from the freed skb. Reject deactivated qdiscs in __netif_schedule(). Callers' RCU protection lets the existing grace period join earlier scheduling calls before the busy check. Restart nonempty transmit queues on reactivation so suppressed scheduling does not strand packets.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99451

wifi: mt76: mt7996: unlink TWT flow if the MCU rejects the agreement

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: unlink TWT flow if the MCU rejects the agreement mt7996_mac_add_twt_setup() links a new flow into dev->twt_list before asking the MCU to add the agreement, but exits without unlinking the flow if the request fails. The flow-ID and table masks are only committed after MCU success, so the still-linked flow is invisible to the mask-gated teardown paths. If the station retries the setup, the same slot is cleared and its embedded list node reinitialized while it is still linked, corrupting dev->twt_list. If the station disassociates instead, teardown skips the flow and station storage can be freed while the node remains linked. A later scheduling or debugfs twt_stats walk can then dereference the freed flow, resulting in a use-after-free. Unlink the flow when the MCU rejects the agreement. This restores the list to its pre-request state while leaving the unchanged mask and agreement accounting untouched.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99448

ufs: use u64 for directory size in ufs_last_byte

In the Linux kernel, the following vulnerability has been resolved: ufs: use u64 for directory size in ufs_last_byte ufs1_read_inode() and ufs2_read_inode() copy the untrusted 64-bit on-disk size into inode->i_size. ufs_last_byte() then truncates that value to an unsigned int before calculating the valid extent of a directory folio. A directory size of exactly 4 GiB is truncated to zero. In ufs_find_entry(), subtracting the requested record length from that zero forms an endpoint almost 4 GiB beyond the mapped folio. A crafted UFS2 image produces: BUG: KASAN: use-after-free in ufs_find_entry+0x583/0x6e0 [ufs] Read of size 1 ... ufs_find_entry ufs_inode_by_name ufs_lookup __lookup_slow path_lookupat The KASAN classification reflects that the adjacent physical page was free; the source-level operation is an out-of-folio read. A controlled UFS1 test with CONFIG_UFS_FS_WRITE enabled also made ufs_find_entry() return a directory entry from an adjacent anonymous page. unlink() then passed that pointer to ufs_delete_entry(), which cleared the adjacent page's 3 2-bit d_ino. This write result reproduced three out of three times. UFS normally requires a privileged mount path. A relevant boundary is a privileged automounter or image-processing service handling an attacker-supplied filesystem. The write primitive additionally requires UFS1 to be mounted read-write with CONFIG_UFS_FS_WRITE enabled; the read is reachable with read-only UFS2. Keep the intermediate size arithmetic at 64 bits so non-final pages are bounded at PAGE_SIZE. With this change, the same controlled tests reach the real on-disk directory entry and produce no adjacent-page write or KASAN report. A reproducer and full validation logs are available on request. The vulnerable helper is present in v7.2-rc3, v7.1, v6.18.38, v6.12.95, v6.6.111, and upstream master at 1229e2e57a5c. Runtime reproduction and fix validation were performed in an x86-64 QEMU guest running v7.2-rc3 with generic KASAN.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99441

nvmet-auth: serialize access to DH-HMAC-CHAP state to fix UAF

In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: serialize access to DH-HMAC-CHAP state to fix UAF A REPLY AUTH_SEND command can derive a dhchap_skey key while a concurrent AUTH_RECEIVE command observing this REPLY state executes the failure path and frees that key. The REPLY command then continues and writes into freed memory, causing a use-after-free. KASAN reports it as: BUG: KASAN: slab-use-after-free in __sha256_final Write of size 4 at addr ffff88800359c540 ... nvmet_auth_sq_free (drivers/nvme/target/auth.c:237) nvmet_execute_auth_receive (drivers/nvme/target/fabrics-cmd-auth.c:621) Add a mutex to each submission queue to serialize authentication commands and timeout handling. Unlock the mutex before completing requests and ignore outdated timeout callbacks. Limit timeout delays to prevent immediate expiry on 32-bit kernels.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99433

ocfs2/dlm: hold a lock reference across grant AST enqueue

In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: hold a lock reference across grant AST enqueue A newly granted remote lock must remain alive until its grant AST is queued. dlmlock_master() publishes the lock on res->granted with its base and queue references, then drops res->spinlock before calling dlm_queue_ast(). The resource's reserved AST count does not retain the lock itself. This can fail when a peer dies with an immediately grantable CREATE buffered on its socket. O2NET's node-down callback flushes receive work before DLM cleanup, but the flush only waits for work queued on entry. A data-ready callback that already selected the socket container can queue new receive work after the flush advances its work color. Socket shutdown does not discard bytes already queued for TCP receive. The late receive work and DLM node-down cleanup can interleave as follows (the lock reference operations shown are before this fix): Socket data-ready Node-down thread Receive worker ----------------- ---------------- -------------- o2net_data_ready() select sc under callback read lock o2net_disconnect_node() queue shutdown begin flush; new color queue sc_rx_work in the new color release callback lock shutdown socket flush returns read buffered CREATE dlmlock_master() lock res->spinlock add lock to granted unlock res->spinlock DLM node-down cleanup lock res->spinlock dlm_free_dead_locks() unlink lock put queue/base refs free lock unlock res->spinlock dlm_queue_ast() __dlm_queue_ast() read lock->lockres (use-after-free) DLM cleanup holds res->spinlock while dlm_free_dead_locks() drops the queue and base references. The CREATE handler no longer holds that spinlock when __dlm_queue_ast() reads the lock, before taking its AST list reference. Take a temporary lock reference under res->spinlock when a grant AST will be queued, and drop it after dlm_queue_ast(). This keeps the lock alive across cleanup until the AST path has taken its own reference, without reversing the existing AST/resource lock order. KASAN report as below: BUG: KASAN: slab-use-after-free in __dlm_queue_ast+0x8a4/0xc00 Read of size 8 at addr ffff88810ead5940 by task kworker/u16:3/52 CPU: 3 UID: 0 PID: 52 Comm: kworker/u16:3 Not tainted 7.3.0-rc4-next-20260921-pmb-bt-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: o2net o2net_rx_until_empty Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? __dlm_queue_ast+0x8a4/0xc00 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? __dlm_queue_ast+0x8a4/0xc00 kasan_report+0xe0/0x110 ? __dlm_queue_ast+0x8a4/0xc00 __dlm_queue_ast+0x8a4/0xc00 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_lock+0x130/0x270 ? __pfx___dlm_queue_ast+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x45/0x60 ? srs ---truncated---

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99432

ocfs2/dlm: hold the lookup reference across convert AST enqueue

In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: hold the lookup reference across convert AST enqueue dlm_convert_lock_handler() drops the reference it took when it found the lock on res->granted at its leave label, one statement before it calls dlm_queue_ast(). dlm_free_dead_locks() takes res->spinlock and drops the list and base references, so a peer death landing in that gap leaves the handler's own put as the one that frees the lock, and __dlm_queue_ast() then reads lock->lockres from freed memory. The handler is registered next to dlm_create_lock_handler(), so a convert message buffered on a dying peer's socket arrives on the same o2net receive work that o2net_disconnect_node() does not wait for. The two can interleave as follows, with the reference counts as they are before this fix: Socket data-ready Node-down thread Receive worker ----------------- ---------------- -------------- o2net_data_ready() select sc under callback read lock o2net_disconnect_node() queue shutdown begin flush; new color queue sc_rx_work in the new color release callback lock shutdown socket flush returns read buffered convert_lock dlm_convert_lock_handler() find lock on res->granted dlm_lock_get() refs = 3 lock res->spinlock __dlmconvert_master() call_ast = 1 unlock res->spinlock DLM node-down cleanup lock res->spinlock dlm_free_dead_locks() unlink lock put list ref refs = 2 put base ref refs = 1 unlock res->spinlock dlm_lock_put() refs = 0 free lock dlm_queue_ast() __dlm_queue_ast() read lock->lockres (use-after-free) __dlmconvert_master() only moves the lock between lists, so the count entering the gap is base, list and lookup. Drop the lookup reference after the AST is queued instead of before it and the race ends with the one __dlm_queue_ast() took, which dlm_flush_asts() releases later with ast_pending cleared and ast_list unlinked. No extra get is needed, and the normal case ends with the same count as before. dlmconvert_master() has the same shape but is only reached from dlmlock() for a lock this node owns, which dlm_free_dead_locks() never matches.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99430

ocfs2: fix chunk number of the first chunk in a local quota file

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix chunk number of the first chunk in a local quota file Mounting a crafted OCFS2 image can corrupt kernel memory. When the local quota file header of such an image claims zero chunks, the first quota entry allocated during the mount gets a chunk number taken from a kernel pointer, and releasing that entry clears a bit far outside the chunk bitmap. The write will corrupt the data stored at that address, and the corruption may lead to a system crash or damage unrelated data. Mounting requires CAP_SYS_ADMIN, so it takes an untrusted image, such as removable media or a loop mount of a file from elsewhere. Since the chunk number comes from a kernel pointer, the address of the bit that gets cleared differs from boot to boot, and the issue has been reported under several titles: - BUG: unable to handle kernel paging request in ocfs2_local_release_dquot - KASAN: use-after-free Write in ocfs2_local_release_dquot - KASAN: slab-out-of-bounds Write in ocfs2_local_release_dquot - KASAN: slab-use-after-free Write in ocfs2_local_release_dquot - KFENCE: use-after-free write in ocfs2_local_release_dquot Note that none of these is a use-after-free in the quota code: the chunk and its buffer head are alive. The bit that gets cleared lies far outside the bitmap. KASAN and KFENCE name each report based on the object occupying that address, which explains why the same issue is reported under so many different titles. In the report I sent, the address fell in a free page, which KASAN labels use-after-free. There are known reproducers. Both a syzkaller and a C reproducer are available from the Google Drive link [1] in my report thread. The issue was found by our modified syzkaller, not a theoretical thing found by an LLM. I have not seen it outside fuzzing, so it is not affecting me in the real world. The local quota file in OCFS2 is divided into chunks, and each chunk begins with a header block holding a bitmap of the quota entries that chunk has handed out. Chunks are numbered from zero, and that number is used to convert the file offset of an entry back into a bit position in the bitmap. ocfs2_local_quota_add_chunk() appends a new chunk to the in-memory list and numbers it one past the chunk that was last: list_add_tail(&chunk->qc_chunk, &oinfo->dqi_chunk); chunk->qc_num = list_entry(chunk->qc_chunk.prev, struct ocfs2_quota_chunk, qc_chunk)->qc_num + 1; The predecessor is looked up after the new chunk is added to the list, so if the list was empty, the prev pointer is the list head itself. The head is the dqi_chunk member of struct ocfs2_mem_dqinfo and is not a chunk, so reading qc_num through it lands 16 bytes past the start of the head, on the dqi_gqinode pointer that follows it. The first chunk of the file is then numbered with the lower half of a kernel pointer instead of 0. The list is empty when the local quota file header claims the file has no chunks. ocfs2_local_read_info() takes dqi_chunks from that header without validating it, so an image with dqi_chunks == 0 takes this path when the first quota entry is allocated. ocfs2_create_local_dquot() turns the bad number into a file offset with ol_dqblk_off(), which shifts a 32-bit block number left by the block size bits, so the top bits of such a large block number are lost. ocfs2_local_release_dquot() turns the offset back into a bit index with ol_dqblk_chunk_off(), using the full chunk number, so the lost bits push that index far outside the bitmap, and clearing it corrupts unrelated memory. Compute the chunk number before putting the chunk on the list, and use 0 when the list is empty.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99429

ocfs2: pin refcount trees before dropping the lookup lock

In the Linux kernel, the following vulnerability has been resolved: ocfs2: pin refcount trees before dropping the lookup lock A refcount tree returned to ocfs2_lock_refcount_tree() must stay alive until that caller releases its operation reference. However, ocfs2_get_refcount_tree() returns the cached pointer after dropping osb_lock, and the caller only takes its kref afterwards. The registry reference does not protect this gap from concurrent removal. This can happen when another node frees a refcount root and reuses its block with a different generation while this mount retains the old cached tree. Two local operations on different inodes sharing the new root, such as data CoW and an external xattr update, can then look up the same stale tree. Their inode locks are independent, and both the REFCOUNT DLM lock and rf_sem are acquired after the first operation reference. The following ordering is possible, with no other operation references: Data CoW Xattr update -------- ------------ Look up the old tree under osb_lock, then drop osb_lock Look up the same tree and take a kref Acquire the tree locks and read the new on-disk generation Erase the old tree under osb_lock Unlock and drop the operation kref Drop the registry kref, freeing tree Take a kref through the freed tree pointer The final kref_get() accesses freed rf_getcnt storage, and subsequent accesses in ocfs2_lock_refcount_tree() also use the freed allocation. Take the operation reference in ocfs2_get_refcount_tree() before releasing osb_lock, including when an insertion loses to another lookup. Removal must acquire the same lock, so it cannot drop the registry reference before the lookup has pinned the tree. Keep the existing unlock and error path puts. The two callers that already hold the refcount tree lock keep their borrowed lookup behavior and do not acquire an extra reference. KASAN report as below: BUG: KASAN: slab-use-after-free in ocfs2_lock_refcount_tree+0x94a/0x9b0 Read of size 4 at addr ffff888117212820 by task python3/497 [Kernel and hardware identification omitted.] Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? ocfs2_lock_refcount_tree+0x94a/0x9b0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? ocfs2_lock_refcount_tree+0x94a/0x9b0 kasan_report+0xe0/0x110 ? ocfs2_lock_refcount_tree+0x94a/0x9b0 ocfs2_lock_refcount_tree+0x94a/0x9b0 ? __pfx_ocfs2_lock_refcount_tree+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? ocfs2_refcount_cow+0x3b6/0xd90 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kmalloc_cache_noprof+0x28d/0x610 ? ocfs2_refcount_cow+0x3b6/0xd90 ocfs2_refcount_cow+0x410/0xd90 ? __pfx_ocfs2_refcount_cow+0x10/0x10 ? __pfx___might_resched+0x10/0x10 ? down_write+0x11a/0x1f0 ? __pfx_down_write+0x10/0x10 ? ocfs2_inode_unlock+0x1a9/0x260 ? __pfx_ocfs2_inode_unlock+0x10/0x10 ? ocfs2_file_write_iter+0x1413/0x1d30 ocfs2_file_write_iter+0x157b/0x1d30 ? __pfx_ocfs2_file_write_iter+0x10/0x10 ? lock_acquire+0x190/0x300 ? __x64_sys_pwrite64+0x1b7/0x220 ? __pfx___might_resched+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? security_file_permission+0x26/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_is_held_type+0x8f/0x100 vfs_write+0x639/0x1010 ? __pfx_ocfs2_file_write_iter+0x10/0x10 ? lock_vma_under_rcu+0x154/0x4a0 ? __pfx_vfs_write+0x10/0x10 ? lock_release+0x121/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 __x64_sys_pwrite64+0x1b7/0x220 ? __pfx___x64_sys_pwrite64+0x10/0x10 ? irqentry_exit+0xbe/0x820 ---truncated---

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99425

ovl: hold a reference on the parent in readdir

In the Linux kernel, the following vulnerability has been resolved: ovl: hold a reference on the parent in readdir Listing a directory on an overlay uses a freed dentry and crashes the kernel when a lookup moves the directory at the same time. Code that can sleep may only use d_parent without a reference while something stops a move of the dentry. ovl_iterate_real(), ovl_need_adjust_d_ino() and ovl_cache_update() use the d_parent of the listed directory and hold only the lock of that directory. When a lookup finds the directory under another parent after a change to a layer, d_splice_alias() moves it without that lock and drops its reference on the old parent. With a delay in ovl_iterate_real(), getdents64 on an overlay directory raced a rename in the lower layer and a lookup that moved its dentry, and after an rmdir of the old parent KASAN reported a use-after-free in security_inode_getattr(). Fix this by using dget_parent() in the three functions. [amir: fix comments in ovl_need_adjust_d_ino()]

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99422

ovl: use the pinned upper dir in ovl_fix_origin()

In the Linux kernel, the following vulnerability has been resolved: ovl: use the pinned upper dir in ovl_fix_origin() Renames made directly on the upper filesystem during a lookup crash the kernel. A dentry that is passed to vfs_setxattr() must be pinned. ovl_fix_origin() passes upper->d_parent to ovl_set_impure() without a reference, and the lookup holds no lock of the upper directory. A rename on the upper filesystem changes d_parent, and only the child pins the new parent, so a second rename and an rmdir free it. With delays in ovl_fix_origin() and ovl_set_impure(), renaming the upper directory twice and removing the intermediate parent during the lookup of a merge directory without an origin xattr gave a KASAN use-after-free in vfs_setxattr(). Fix this by passing the upper dentry that the overlay parent holds. [amir: add helper ovl_set_impure_dir()]

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99401

rtnetlink: wait for RCU readers in rtnl_link_unregister()

In the Linux kernel, the following vulnerability has been resolved: rtnetlink: wait for RCU readers in rtnl_link_unregister() rtnl_link_ops_get() finds ops on link_ops under rcu_read_lock() and only then takes ops->srcu. rtnl_link_unregister() unlinks ops, then calls synchronize_srcu() and cleanup_srcu_struct() without first waiting for RCU readers. A reader that found ops before list_del_rcu() and has not yet taken ops->srcu is not waited for. Such a reader then locks a cleaned-up srcu_struct and keeps using ops after the module that owns it is gone. rtnl_newlink() and rtnl_dump_ifinfo() both look up ops without RTNL, the latter for any user that dumps links filtered by kind. With delays added between the lookup and srcu_read_lock() in rtnl_link_ops_get(), and before rtnl_link_ops_put() in rtnl_dump_ifinfo(), running "ip link show type dummy" alongside "rmmod dummy" on a KASAN kernel gives: BUG: KASAN: vmalloc-out-of-bounds in __srcu_read_unlock+0x57/0x70 Read of size 8 at addr ffffffffc02ff318 by task ip/147 Call Trace: __srcu_read_unlock+0x57/0x70 rtnl_dump_ifinfo.cold+0x30/0x3b rtnl_dumpit+0x7a/0x1b0 netlink_dump+0x486/0x11b0 __netlink_dump_start+0x661/0x910 rtnetlink_rcv_msg+0x611/0x9e0 netlink_rcv_skb+0x126/0x380 netlink_unicast+0x605/0x830 netlink_sendmsg+0x6d0/0xbb0 __sys_sendto+0x335/0x3a0 Call synchronize_rcu() before synchronize_srcu(), as rtnl_af_unregister() already does. This should be enough because rtnl_link_ops_get() is the only RCU walker of link_ops, and it takes ops->srcu before rcu_read_unlock(), so every reader that found ops is covered by synchronize_srcu() once the RCU grace period ends. The extra grace period only costs time at module unload. Readers and the writer were serialized by RTNL until link_ops got its own mutex, which is why the missing RCU wait did not matter before.

CVSS 3.1 · 7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99400

xfs: reject out-of-range attribute value lengths in xfs_attr_copy_value

In the Linux kernel, the following vulnerability has been resolved: xfs: reject out-of-range attribute value lengths in xfs_attr_copy_value xfs_attr_copy_value() takes the value length as a signed int and, for a remote xattr, is handed args->rmtvaluelen. That field is filled from the on-disk __be32 xfs_attr_leaf_name_remote.valuelen in xfs_attr3_leaf_getvalue(), so a crafted length such as 0x80000000 is stored into the signed rmtvaluelen as a negative number. The "buffer too small" guard in xfs_attr_copy_value() is a signed comparison: if (args->valuelen < valuelen) return -ERANGE; A negative valuelen therefore compares as smaller than the caller's buffer size, skips the -ERANGE path, and is then used as a copy length, leading to an out-of-bounds copy of a full remote block into a small getxattr(2) buffer on a mounted crafted image. Reject a value length that is negative or larger than the maximum xattr size before it is used, so a bogus on-disk length can no longer slip through the value copier.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99399

xfs: reject remote xattr entries with an out-of-range value length

In the Linux kernel, the following vulnerability has been resolved: xfs: reject remote xattr entries with an out-of-range value length xfs_attr3_leaf_verify_entry() validates a remote attribute entry's name but never bounds its on-disk value length (xfs_attr_leaf_name_remote. valuelen, a __be32). A crafted leaf with valuelen = 0x80000000 passes the verifier and the CRC. That length is later assigned into the signed int args->rmtvaluelen (xfs_attr3_leaf_getvalue), becoming negative, which slips past the signed -ERANGE check in xfs_attr_copy_value(); a getxattr() with a small buffer then memcpy()s a full remote block into the small kvalue buffer (xfs_attr_rmtval_copyout) -- a heap out-of-bounds write with attacker-controlled content, from an unprivileged getxattr(2) on a mounted crafted image. Reject remote entries whose value length exceeds XFS_XATTR_SIZE_MAX in the leaf verifier, so the malicious block is rejected at read time.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99395

xfs: bound inode fork length against the fork size during log recovery

In the Linux kernel, the following vulnerability has been resolved: xfs: bound inode fork length against the fork size during log recovery xlog_recover_inode_commit_pass2() copies an inode log item's data/attr fork region into the inode buffer using the on-log region length without bounding it against the fork capacity, e.g.: len = item->ri_buf[2].iov_len; memcpy(XFS_DFORK_DPTR(dip), src, len); The only guard is an ASSERT, which is a no-op on production kernels (CONFIG_XFS_DEBUG off), and xfs_dinode_verify() runs only after the copy. A crafted image with a dirty log can therefore drive a heap out-of-bounds write at mount time. The XFS_ILOG_DBROOT sibling already passes XFS_DFORK_DSIZE as a bound; the DDATA/DEXT and ADATA/AEXT memcpy paths did not. Bound each logged fork region against the destination fork size before copying it, and reject the log item with -EFSCORRUPTED when it does not fit. Because the recovered inode is only verified after the fork data has been copied in, the checks are done up front, before any memcpy into the on-disk inode.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99389

smb: server: size directory name conversion buffer correctly

In the Linux kernel, the following vulnerability has been resolved: smb: server: size directory name conversion buffer correctly A 2048-byte ASCII directory name needs 4098 bytes when converted to UTF-16, including the terminator. ksmbd_convert_dir_info_name() caps its allocation at PATH_MAX and writes past the end of that buffer. Allocate space for one UTF-16 code unit per input byte plus the terminator. Use kmalloc_array() to check the size calculation.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99386

smb: client: don't resurrect an exiting tcon from cached dir workers

In the Linux kernel, the following vulnerability has been resolved: smb: client: don't resurrect an exiting tcon from cached dir workers cfids_laundromat_worker() bumps tcon->tc_count for every expired open cfid and queues cached_dir_offload_close() without checking whether the tcon is already being torn down. Racing with the final cifs_put_tcon(), the tcon comes back from zero and gets torn down twice: T1 T2 cifs_put_tcon() --tc_count == 0, TID_EXITING tconInfoFree() free_cached_dirs() cancel_delayed_work_sync() cfids_laundromat_worker() ++tc_count == 1 queue_work(serverclose_wq) kfree(tcon->origin_fullpath) kfree(tcon) cached_dir_offload_close() close_cached_dir() [UAF] cifs_put_tcon() tconInfoFree() [double free] cached_dir_lease_break() also bumps tc_count without tc_lock, racing with the laundromat's locked update. Take the tcon reference through a helper that refuses once the tcon is TID_EXITING or its refcount has dropped to zero. Queued put_work and close_work then always hold a tcon reference, so tconInfoFree() can't run before they finish and free_cached_dirs() doesn't need to flush any workqueue. If the laundromat can't get a reference, put the cfid back on the dying list for free_cached_dirs() to free; its handle goes away with the tree connection. The lease break path finds the tcon on ses->tcon_list under cifs_tcp_ses_lock, so it can't see TID_EXITING, but it now takes tc_lock.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products