| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM ContextForge MCP Gateway 1.0.0 through 1.0.7 could allow a remote attacker to gain administrative access due to the use of default credentials. |
| ArduinoBLE enables Bluetooth Low Energy connectivity on certain Arduino models. Versions prior to 2.0.2 contain a missing bounds check in the ATT layer write request handler that allows a remote, unauthenticated BLE client to corrupt memory in the ATTClass global object. Devices running ArduinoBLE with one or more characteristics configured with the BLEEncryption property are affected. The fix is included starting from the 2.0.2 release. |
| career-ops is an open-source AI-assisted job search and application management tool. Prior to 0.8.0, the career-ops local web dashboard web/ exposed command-spawning and user-file-writing /api routes without validating request origin or restricting clients to loopback addresses. A malicious page in another browser tab could send cross-origin localhost requests while the dashboard was running, and a dashboard bound beyond loopback could receive direct requests from the local network. Both paths allowed unauthenticated command execution as the dashboard user, but npm installations were unaffected because web/ is excluded from the published package. This issue is fixed in version 0.8.0. |
| Weak authentication in SQL Server allows an authorized attacker to elevate privileges over a network. |
| A vulnerability was identified in lenve vhr 1.0-SNAPSHOT. Affected by this issue is some unknown functionality of the file vhr.sql. The manipulation leads to use of default credentials. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| undici's dump interceptor reads and discards a response body up to a configurable maximum size. When a response declares a Content-Length that exceeds the maximum, the interceptor aborts cleanly, but when a response has no Content-Length and is chunked, the interceptor instead signals completion early once the accumulated size reaches the maximum, without pausing or aborting the request. Because the underlying parser keeps delivering body bytes, a second completion signal fires and trips an internal assertion, which aborts the request and tears down the connection. The application is left observing a misleading successful status with an empty or truncated body while the connection has actually been disconnected. This affects undici versions from 7.1.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2. |
| Stack-based buffer overflow in Windows Storage Management Provider allows an authorized attacker to elevate privileges locally. |
| When using LookupCNAME with the cgo DNS resolver, a very long CNAME response can trigger a double-free of C memory and a crash. |
| PraisonAI is a multi-agent teams system. Prior to praisonaiagents 1.6.59, ToolsMCPServer.run_sse and launch_tools_mcp_server bind to 0.0.0.0 and create /sse and /messages/ routes without invoking the available SecurityConfig authentication, origin-validation, or DNS-rebinding controls. Any reachable client can list and invoke registered tools, and a browser can target a local instance through DNS rebinding, with impact determined by the registered file, shell, and code-execution tools. This vulnerability is fixed in praisonaiagents 1.6.59. |
| sift (sift.js) 17.1.3 enumerates query keys with for...in, which walks the object prototype chain, and dispatches any matched operator key including $where. The $where operation compiles a string value into a function using new Function unless CSP_ENABLED is set (not set by default). As a result, if a prototype-pollution primitive elsewhere in the process sets Object.prototype.$where to a malicious string, even benign filter calls such as sift({}) execute arbitrary JavaScript. Additionally, passing an untrusted query object containing a string $where directly to sift results in code execution under the default configuration. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to obtain sensitive information due to improper validation of the WebSocket origin. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.3, Flowise's HTTP security module httpSecurity.ts did not normalize IPv4-mapped IPv6 addresses such as ::ffff:127.0.0.1 and ::ffff:169.254.169.254 before checking them against the deny list. Because ipaddr.js reports these addresses as ipv6 while IPv4 CIDR deny-list entries are ipv4, isDeniedIP() skipped the IPv4 CIDR checks. An attacker who controls DNS resolution for a hostname used by the HTTP Node, API Chain, Document Loader, MCP tool, or other paths using secureAxiosRequest(), secureFetch(), or checkDenyList() could return a AAAA record for an IPv4-mapped target and cause requests to reach localhost, internal services, or cloud metadata endpoints. This issue is fixed in version 3.1.3. |
| An issue was discovered in HAProxy 3.3.0 through 3.4.4 and in 3.5-dev1 through 3.5-dev5. Exploitation requires an HTTP/3 frontend: HAProxy must be built with QUIC support and configured with a QUIC bind listener, and the affected traffic must reach a backend over HTTP/1.1 using chunked transfer coding on a reused connection. Under those conditions, when an HTTP/3 request carries no Content-Length header, the HTTP/3 multiplexer credits the length declared in a DATA frame header to the stream endpoint's known-input-payload estimate at the moment the frame header is decoded, before the payload has been received, and that declared length is emitted verbatim as the HTTP/1.1 chunk size. A remote unauthenticated client that declares more payload than it delivers and then ends the stream causes HAProxy to announce a chunk larger than the bytes it writes and to return the connection to the idle pool in a desynchronized state. The result is potential HTTP request smuggling on reused backend connections: an attacker can place a request past a frontend rule such as a path-based http-request deny, so that the smuggled request is never seen by HAProxy's HTTP analysis, and can cause concurrent clients' requests, including their request lines and Authorization headers, to be consumed as the attacker's request body and lost. Exploitation is not deterministic; it depends on a race with backend connection pooling, succeeding in a majority of but not all trials during testing, and can be retried freely. The mechanism was introduced in 3.3-dev10; releases 3.2.x and earlier are unaffected. |
| Forgejo before 16.0.4 allows remote code execution via a crafted template repository because template expansion on files in .forgejo/template is mishandled. |
| Improper protection of physical side channels vulnerability in Microchip AN1044, Microchip AN953, and Microchip SW300052.
This issue affects AN1044: through A; AN953: through A; SW300052: through 2.6. |
| In the Linux kernel, the following vulnerability has been resolved:
net: pull headers in qdisc_pkt_len_segs_init()
Most ndo_start_xmit() methods expects headers of gso packets
to be already in skb->head.
net/core/tso.c users are particularly at risk, because tso_build_hdr()
does a memcpy(hdr, skb->data, hdr_len);
qdisc_pkt_len_segs_init() already does a dissection of gso packets.
Use pskb_may_pull() instead of skb_header_pointer() to make
sure drivers do not have to reimplement this.
Some malicious packets could be fed, detect them so that we can
drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "media: v4l2-dev: fix error handling in __video_register_device()"
This reverts commit 2a934fdb01db6458288fc9386d3d8ceba6dd551a.
The intentions of that patch were good, but it doesn't work.
The idea is that if device_register fails, you have to do a put_device
to let the ref counter release resources.
However, the V4L2 API says that if video_register_device() fails, then
you have to call video_device_release(), which kfree()s the video_device
struct.
But the put_device() will already have freed the struct, so you end
up in a double-free scenario.
There is not really a good way of fixing this without breaking
video_register_device() into two parts, one that initializes everything,
and one that does the actual device_register, and then converting all
V4L2 drivers to this new model.
That is a massive job, and it is very unlikely that device_register
will fail.
So rather than ending up in a double-free scenario, just revert this
patch, and in that case we'll have a small memory leak. Which is a lot
more robust. |
| In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: pass packet set buffer size to parser
ecryptfs_parse_packet_set() receives a pointer into the file header, but
it calculates the remaining packet buffer size from PAGE_SIZE - 8. For
version 1 headers the packet set starts later in the header, so this can
overstate the available buffer.
Pass the actual packet set buffer length from the caller and calculate
per-packet limits from the remaining bytes in that buffer. Recompute the
remaining length after consuming a tag 3 packet before parsing the
following tag 11 packet. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-scsi: fix DSM TRIM for sector sizes larger than 2048 bytes
ata_scsi_write_same_xlat() translates a SCSI WRITE SAME command with the
UNMAP bit set into an ATA DATA SET MANAGEMENT TRIM command. The TRIM
descriptor is built by ata_format_dsm_trim_descr() into the 2048-byte
ata_scsi_rbuf staging buffer, and the number of bytes copied is compared
against the logical sector size by the caller:
size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block);
if (size != len) /* len == sdp->sector_size */
goto invalid_param_len;
ata_format_dsm_trim_descr() clamps the copy length to ATA_SCSI_RBUF_SIZE
(2048). On a device whose logical sector size exceeds that (e.g. a 4Kn
device, where sector_size == 4096) the function can never return more than
2048, while the caller expects it to return sector_size. The comparison
therefore always fails, so every TRIM is rejected with "Parameter list
length error" and WARN_ON() splats on each attempt. TRIM / discard is
thus completely broken on such devices.
The descriptor was incorrectly sized from the logical sector size. A DSM
TRIM payload is a list of 512-byte pages, each holding up to
ATA_MAX_TRIM_RNUM (64) LBA Range Entries, and is independent of the logical
sector size. The Block Limits VPD page already advertises a single such
page as the maximum WRITE SAME length (65535 * ATA_MAX_TRIM_RNUM logical
blocks), so the block layer never sends a request that needs more than one
page.
Emit exactly one 512-byte page, independent of the logical sector size,
and transfer only that page (COUNT == 1). For a 512-byte-sector device
this is unchanged; devices with larger logical sectors now work instead of
failing every TRIM. |
| In the Linux kernel, the following vulnerability has been resolved:
bnx2x: fix double free in bnx2x_init_firmware() error path
bnx2x_init_firmware() frees bp->init_ops, bp->init_data and
bp->init_ops_offsets in its error path without setting them to NULL.
The cleanup function bnx2x_release_firmware() frees the same three
pointers unconditionally, so if init_firmware fails and
release_firmware is later called (e.g. from __bnx2x_remove or through
the function state machine), all three are freed a second time.
Set each pointer to NULL after kfree() in the error path so that the
subsequent kfree(NULL) in bnx2x_release_firmware() is a safe no-op. |
