| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in wpdever WP Notification Bell allows Stored XSS. This issue affects WP Notification Bell: from n/a through 1.4.5. |
| Missing Authorization vulnerability in VillaTheme HAPPY allows Exploiting Incorrectly Configured Access Control Security Levels. This issue affects HAPPY: from n/a through 1.0.6. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in KaizenCoders Table of content allows Stored XSS. This issue affects Table of content: from n/a through 1.5.3.1. |
| Cross-Site Request Forgery (CSRF) vulnerability in WPKube Authors List allows Cross Site Request Forgery. This issue affects Authors List: from n/a through 2.0.6.1. |
| Cross-Site Request Forgery (CSRF) vulnerability in reimund Compact Admin allows Cross Site Request Forgery. This issue affects Compact Admin: from n/a through 1.3.0. |
| Cross-Site Request Forgery (CSRF) vulnerability in David Merinas Add to Feedly allows Stored XSS. This issue affects Add to Feedly: from n/a through 1.2.11. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in snagysandor Parallax Scrolling Enllax.js allows Stored XSS. This issue affects Parallax Scrolling Enllax.js: from n/a through 0.0.6. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in SdeWijs Zoomify embed for WP allows Stored XSS. This issue affects Zoomify embed for WP: from n/a through 1.5.2. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Ibnul H. Custom Team Manager allows Stored XSS. This issue affects Custom Team Manager: from n/a through 2.4.2. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: bno055: fix OOB access of hw_xlate array
Fix a potential out-of-bounds array access of the hw_xlate array in
bno055.c.
In bno055_get_regmask(), hw_xlate was iterated over the length of the
vals array instead of the length of the hw_xlate array. In the case of
bno055_gyr_scale, the vals array is larger than the hw_xlate array,
so this could result in an out-of-bounds access. In practice, this
shouldn't happen though because a match should always be found which
breaks out of the for loop before it iterates beyond the end of the
hw_xlate array.
By adding a new hw_xlate_len field to the bno055_sysfs_attr, we can be
sure we are iterating over the correct length. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix UAF on smcsk after smc_listen_out()
BPF CI testing report a UAF issue:
[ 16.446633] BUG: kernel NULL pointer dereference, address: 000000000000003 0
[ 16.447134] #PF: supervisor read access in kernel mod e
[ 16.447516] #PF: error_code(0x0000) - not-present pag e
[ 16.447878] PGD 0 P4D 0
[ 16.448063] Oops: Oops: 0000 [#1] PREEMPT SMP NOPT I
[ 16.448409] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Tainted: G OE 6.13.0-rc3-g89e8a75fda73-dirty #4 2
[ 16.449124] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODUL E
[ 16.449502] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/201 4
[ 16.450201] Workqueue: smc_hs_wq smc_listen_wor k
[ 16.450531] RIP: 0010:smc_listen_work+0xc02/0x159 0
[ 16.452158] RSP: 0018:ffffb5ab40053d98 EFLAGS: 0001024 6
[ 16.452526] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 000000000000030 0
[ 16.452994] RDX: 0000000000000280 RSI: 00003513840053f0 RDI: 000000000000000 0
[ 16.453492] RBP: ffffa097808e3800 R08: ffffa09782dba1e0 R09: 000000000000000 5
[ 16.453987] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0978274640 0
[ 16.454497] R13: 0000000000000000 R14: 0000000000000000 R15: ffffa09782d4092 0
[ 16.454996] FS: 0000000000000000(0000) GS:ffffa097bbc00000(0000) knlGS:000000000000000 0
[ 16.455557] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003 3
[ 16.455961] CR2: 0000000000000030 CR3: 0000000102788004 CR4: 0000000000770ef 0
[ 16.456459] PKRU: 5555555 4
[ 16.456654] Call Trace :
[ 16.456832] <TASK >
[ 16.456989] ? __die+0x23/0x7 0
[ 16.457215] ? page_fault_oops+0x180/0x4c 0
[ 16.457508] ? __lock_acquire+0x3e6/0x249 0
[ 16.457801] ? exc_page_fault+0x68/0x20 0
[ 16.458080] ? asm_exc_page_fault+0x26/0x3 0
[ 16.458389] ? smc_listen_work+0xc02/0x159 0
[ 16.458689] ? smc_listen_work+0xc02/0x159 0
[ 16.458987] ? lock_is_held_type+0x8f/0x10 0
[ 16.459284] process_one_work+0x1ea/0x6d 0
[ 16.459570] worker_thread+0x1c3/0x38 0
[ 16.459839] ? __pfx_worker_thread+0x10/0x1 0
[ 16.460144] kthread+0xe0/0x11 0
[ 16.460372] ? __pfx_kthread+0x10/0x1 0
[ 16.460640] ret_from_fork+0x31/0x5 0
[ 16.460896] ? __pfx_kthread+0x10/0x1 0
[ 16.461166] ret_from_fork_asm+0x1a/0x3 0
[ 16.461453] </TASK >
[ 16.461616] Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod(OE) ]
[ 16.462134] CR2: 000000000000003 0
[ 16.462380] ---[ end trace 0000000000000000 ]---
[ 16.462710] RIP: 0010:smc_listen_work+0xc02/0x1590
The direct cause of this issue is that after smc_listen_out_connected(),
newclcsock->sk may be NULL since it will releases the smcsk. Therefore,
if the application closes the socket immediately after accept,
newclcsock->sk can be NULL. A possible execution order could be as
follows:
smc_listen_work | userspace
-----------------------------------------------------------------
lock_sock(sk) |
smc_listen_out_connected() |
| \- smc_listen_out |
| | \- release_sock |
| |- sk->sk_data_ready() |
| fd = accept();
| close(fd);
| \- socket->sk = NULL;
/* newclcsock->sk is NULL now */
SMC_STAT_SERV_SUCC_INC(sock_net(newclcsock->sk))
Since smc_listen_out_connected() will not fail, simply swapping the order
of the code can easily fix this issue. |
| fs2 is a compositional, streaming I/O library for Scala. Versions 3.12.2 and lower and 3.13.0-M1 through 3.13.0-M6 is vulnerable to denial of service attacks though TLS sessions using fs2-io on the JVM using the fs2.io.net.tls package. When establishing a TLS session, if one side of the connection shuts down `write` while the peer side is awaiting more data to progress the TLS handshake, the peer side will spin loop on the socket read, fully utilizing a CPU. The CPU is consumed until the overall connection is closed, potentially shutting down a fs2-io powered server. This issue is fixed in versions 3.12.1 and 3.13.0-M7. |
| A flaw has been found in elunez eladmin up to 2.7. This impacts the function updateUserEmail of the file /api/users/updateEmail/ of the component Email Address Handler. Executing manipulation of the argument id/email can lead to improper authorization. The attack may be performed from remote. Attacks of this nature are highly complex. The exploitability is said to be difficult. The exploit has been published and may be used. It is required to know the RSA-encrypted password of the attacked user account. |
| The Biagiotti Core plugin for WordPress is vulnerable to Stored Cross-Site Scripting via shortcodes in versions up to, and including, 2.1.3 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers with contributor-level and above permissions to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Some payload elements of the messages sent between two stations in a networking architecture are not properly checked on the receiving station allowing an attacker to execute unauthorized commands in the application. |
| A vulnerability has been found in PHPGurukul Online Course Registration 3.1. Affected is an unknown function of the file /admin/semester.php. The manipulation of the argument semester leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
ppp: fix race conditions in ppp_fill_forward_path
ppp_fill_forward_path() has two race conditions:
1. The ppp->channels list can change between list_empty() and
list_first_entry(), as ppp_lock() is not held. If the only channel
is deleted in ppp_disconnect_channel(), list_first_entry() may
access an empty head or a freed entry, and trigger a panic.
2. pch->chan can be NULL. When ppp_unregister_channel() is called,
pch->chan is set to NULL before pch is removed from ppp->channels.
Fix these by using a lockless RCU approach:
- Use list_first_or_null_rcu() to safely test and access the first list
entry.
- Convert list modifications on ppp->channels to their RCU variants and
add synchronize_net() after removal.
- Check for a NULL pch->chan before dereferencing it. |
| The StreamWeasels Kick Integration plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘vodsChannel’ parameter in all versions up to, and including, 1.1.5 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The AdForest theme for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 6.0.9. This is due to the plugin not properly verifying a user's identity prior to authenticating them. This makes it possible for unauthenticated attackers to log in as other users, including administrators, without access to a password. |
| The Optio Dentistry plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'optio-lightbox' shortcode in all versions up to, and including, 2.2 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
