| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/sev: Evict cache lines during SNP memory validation
An SNP cache coherency vulnerability requires a cache line eviction
mitigation when validating memory after a page state change to private.
The specific mitigation is to touch the first and last byte of each 4K
page that is being validated. There is no need to perform the mitigation
when performing a page state change to shared and rescinding validation.
CPUID bit Fn8000001F_EBX[31] defines the COHERENCY_SFW_NO CPUID bit
that, when set, indicates that the software mitigation for this
vulnerability is not needed.
Implement the mitigation and invoke it when validating memory (making it
private) and the COHERENCY_SFW_NO bit is not set, indicating the SNP
guest is vulnerable. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras
The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C)
report a HID sensor interface that is not actually implemented.
Attempting to access this non-functional sensor via iio_info causes
system hangs as runtime PM tries to wake up an unresponsive sensor.
Add these 2 devices to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fix kernel crash when hard resetting the GPU
The GPU hard reset sequence calls pm_runtime_force_suspend() and
pm_runtime_force_resume(), which according to their documentation should
only be used during system-wide PM transitions to sleep states.
The main issue though is that depending on some internal runtime PM
state as seen by pm_runtime_force_suspend() (whether the usage count is
<= 1), pm_runtime_force_resume() might not resume the device unless
needed. If that happens, the runtime PM resume callback
pvr_power_device_resume() is not called, the GPU clocks are not
re-enabled, and the kernel crashes on the next attempt to access GPU
registers as part of the power-on sequence.
Replace calls to pm_runtime_force_suspend() and
pm_runtime_force_resume() with direct calls to the driver's runtime PM
callbacks, pvr_power_device_suspend() and pvr_power_device_resume(),
to ensure clocks are re-enabled and avoid the kernel crash. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix oops due to non-existence of prealloc backlog struct
If an AF_RXRPC service socket is opened and bound, but calls are
preallocated, then rxrpc_alloc_incoming_call() will oops because the
rxrpc_backlog struct doesn't get allocated until the first preallocation is
made.
Fix this by returning NULL from rxrpc_alloc_incoming_call() if there is no
backlog struct. This will cause the incoming call to be aborted. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix assertion when building free space tree
When building the free space tree with the block group tree feature
enabled, we can hit an assertion failure like this:
BTRFS info (device loop0 state M): rebuilding free space tree
assertion failed: ret == 0, in fs/btrfs/free-space-tree.c:1102
------------[ cut here ]------------
kernel BUG at fs/btrfs/free-space-tree.c:1102!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
Modules linked in:
CPU: 1 UID: 0 PID: 6592 Comm: syz-executor322 Not tainted 6.15.0-rc7-syzkaller-gd7fa1af5b33e #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102
lr : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102
sp : ffff8000a4ce7600
x29: ffff8000a4ce76e0 x28: ffff0000c9bc6000 x27: ffff0000ddfff3d8
x26: ffff0000ddfff378 x25: dfff800000000000 x24: 0000000000000001
x23: ffff8000a4ce7660 x22: ffff70001499cecc x21: ffff0000e1d8c160
x20: ffff0000e1cb7800 x19: ffff0000e1d8c0b0 x18: 00000000ffffffff
x17: ffff800092f39000 x16: ffff80008ad27e48 x15: ffff700011e740c0
x14: 1ffff00011e740c0 x13: 0000000000000004 x12: ffffffffffffffff
x11: ffff700011e740c0 x10: 0000000000ff0100 x9 : 94ef24f55d2dbc00
x8 : 94ef24f55d2dbc00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff8000a4ce6f98 x4 : ffff80008f415ba0 x3 : ffff800080548ef0
x2 : 0000000000000000 x1 : 0000000100000000 x0 : 000000000000003e
Call trace:
populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 (P)
btrfs_rebuild_free_space_tree+0x14c/0x54c fs/btrfs/free-space-tree.c:1337
btrfs_start_pre_rw_mount+0xa78/0xe10 fs/btrfs/disk-io.c:3074
btrfs_remount_rw fs/btrfs/super.c:1319 [inline]
btrfs_reconfigure+0x828/0x2418 fs/btrfs/super.c:1543
reconfigure_super+0x1d4/0x6f0 fs/super.c:1083
do_remount fs/namespace.c:3365 [inline]
path_mount+0xb34/0xde0 fs/namespace.c:4200
do_mount fs/namespace.c:4221 [inline]
__do_sys_mount fs/namespace.c:4432 [inline]
__se_sys_mount fs/namespace.c:4409 [inline]
__arm64_sys_mount+0x3e8/0x468 fs/namespace.c:4409
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Code: f0047182 91178042 528089c3 9771d47b (d4210000)
---[ end trace 0000000000000000 ]---
This happens because we are processing an empty block group, which has
no extents allocated from it, there are no items for this block group,
including the block group item since block group items are stored in a
dedicated tree when using the block group tree feature. It also means
this is the block group with the highest start offset, so there are no
higher keys in the extent root, hence btrfs_search_slot_for_read()
returns 1 (no higher key found).
Fix this by asserting 'ret' is 0 only if the block group tree feature
is not enabled, in which case we should find a block group item for
the block group since it's stored in the extent root and block group
item keys are greater than extent item keys (the value for
BTRFS_BLOCK_GROUP_ITEM_KEY is 192 and for BTRFS_EXTENT_ITEM_KEY and
BTRFS_METADATA_ITEM_KEY the values are 168 and 169 respectively).
In case 'ret' is 1, we just need to add a record to the free space
tree which spans the whole block group, and we can achieve this by
making 'ret == 0' as the while loop's condition. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: max9286: fix kernel oops when removing module
When removing the max9286 module we get a kernel oops:
Unable to handle kernel paging request at virtual address 000000aa00000094
Mem abort info:
ESR = 0x96000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000880d85000
[000000aa00000094] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in: fsl_jr_uio caam_jr rng_core libdes caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine max9271 authenc crct10dif_ce mxc_jpeg_encdec
CPU: 2 PID: 713 Comm: rmmod Tainted: G C 5.15.5-00057-gaebcd29c8ed7-dirty #5
Hardware name: Freescale i.MX8QXP MEK (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : i2c_mux_del_adapters+0x24/0xf0
lr : max9286_remove+0x28/0xd0 [max9286]
sp : ffff800013a9bbf0
x29: ffff800013a9bbf0 x28: ffff00080b6da940 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
x23: ffff000801a5b970 x22: ffff0008048b0890 x21: ffff800009297000
x20: ffff0008048b0f70 x19: 000000aa00000064 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000014 x13: 0000000000000000 x12: ffff000802da49e8
x11: ffff000802051918 x10: ffff000802da4920 x9 : ffff000800030098
x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d
x5 : 8080808000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffffffffffffffff x1 : ffff00080b6da940 x0 : 0000000000000000
Call trace:
i2c_mux_del_adapters+0x24/0xf0
max9286_remove+0x28/0xd0 [max9286]
i2c_device_remove+0x40/0x110
__device_release_driver+0x188/0x234
driver_detach+0xc4/0x150
bus_remove_driver+0x60/0xe0
driver_unregister+0x34/0x64
i2c_del_driver+0x58/0xa0
max9286_i2c_driver_exit+0x1c/0x490 [max9286]
__arm64_sys_delete_module+0x194/0x260
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0xd4/0xfc
do_el0_svc+0x2c/0x94
el0_svc+0x28/0x80
el0t_64_sync_handler+0xa8/0x130
el0t_64_sync+0x1a0/0x1a4
The Oops happens because the I2C client data does not point to
max9286_priv anymore but to v4l2_subdev. The change happened in
max9286_init() which calls v4l2_i2c_subdev_init() later on...
Besides fixing the max9286_remove() function, remove the call to
i2c_set_clientdata() in max9286_probe(), to avoid confusion, and make
the necessary changes to max9286_init() so that it doesn't have to use
i2c_get_clientdata() in order to fetch the pointer to priv. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: of: Fix refcount leak bug in of_lpddr3_get_ddr_timings()
We should add the of_node_put() when breaking out of
for_each_child_of_node() as it will automatically increase
and decrease the refcount. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't set up encryption key during jbd2 transaction
Commit a80f7fcf1867 ("ext4: fixup ext4_fc_track_* functions' signature")
extended the scope of the transaction in ext4_unlink() too far, making
it include the call to ext4_find_entry(). However, ext4_find_entry()
can deadlock when called from within a transaction because it may need
to set up the directory's encryption key.
Fix this by restoring the transaction to its original scope. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Validate the box size for the snooped cursor
Invalid userspace dma surface copies could potentially overflow
the memcpy from the surface to the snooped image leading to crashes.
To fix it the dimensions of the copybox have to be validated
against the expected size of the snooped cursor. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid crash when inline data creation follows DIO write
When inode is created and written to using direct IO, there is nothing
to clear the EXT4_STATE_MAY_INLINE_DATA flag. Thus when inode gets
truncated later to say 1 byte and written using normal write, we will
try to store the data as inline data. This confuses the code later
because the inode now has both normal block and inline data allocated
and the confusion manifests for example as:
kernel BUG at fs/ext4/inode.c:2721!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 359 Comm: repro Not tainted 5.19.0-rc8-00001-g31ba1e3b8305-dirty #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:ext4_writepages+0x363d/0x3660
RSP: 0018:ffffc90000ccf260 EFLAGS: 00010293
RAX: ffffffff81e1abcd RBX: 0000008000000000 RCX: ffff88810842a180
RDX: 0000000000000000 RSI: 0000008000000000 RDI: 0000000000000000
RBP: ffffc90000ccf650 R08: ffffffff81e17d58 R09: ffffed10222c680b
R10: dfffe910222c680c R11: 1ffff110222c680a R12: ffff888111634128
R13: ffffc90000ccf880 R14: 0000008410000000 R15: 0000000000000001
FS: 00007f72635d2640(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000565243379180 CR3: 000000010aa74000 CR4: 0000000000150eb0
Call Trace:
<TASK>
do_writepages+0x397/0x640
filemap_fdatawrite_wbc+0x151/0x1b0
file_write_and_wait_range+0x1c9/0x2b0
ext4_sync_file+0x19e/0xa00
vfs_fsync_range+0x17b/0x190
ext4_buffered_write_iter+0x488/0x530
ext4_file_write_iter+0x449/0x1b90
vfs_write+0xbcd/0xf40
ksys_write+0x198/0x2c0
__x64_sys_write+0x7b/0x90
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Fix the problem by clearing EXT4_STATE_MAY_INLINE_DATA when we are doing
direct IO write to a file. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING
vub300_enable_sdio_irq() works with mutex and need TASK_RUNNING here.
Ensure that we mark current as TASK_RUNNING for sleepable context.
[ 77.554641] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff92a72c1d>] sdio_irq_thread+0x17d/0x5b0
[ 77.554652] WARNING: CPU: 2 PID: 1983 at kernel/sched/core.c:9813 __might_sleep+0x116/0x160
[ 77.554905] CPU: 2 PID: 1983 Comm: ksdioirqd/mmc1 Tainted: G OE 6.1.0-rc5 #1
[ 77.554910] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020
[ 77.554912] RIP: 0010:__might_sleep+0x116/0x160
[ 77.554920] RSP: 0018:ffff888107b7fdb8 EFLAGS: 00010282
[ 77.554923] RAX: 0000000000000000 RBX: ffff888118c1b740 RCX: 0000000000000000
[ 77.554926] RDX: 0000000000000001 RSI: 0000000000000004 RDI: ffffed1020f6ffa9
[ 77.554928] RBP: ffff888107b7fde0 R08: 0000000000000001 R09: ffffed1043ea60ba
[ 77.554930] R10: ffff88821f5305cb R11: ffffed1043ea60b9 R12: ffffffff93aa3a60
[ 77.554932] R13: 000000000000011b R14: 7fffffffffffffff R15: ffffffffc0558660
[ 77.554934] FS: 0000000000000000(0000) GS:ffff88821f500000(0000) knlGS:0000000000000000
[ 77.554937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 77.554939] CR2: 00007f8a44010d68 CR3: 000000024421a003 CR4: 00000000003706e0
[ 77.554942] Call Trace:
[ 77.554944] <TASK>
[ 77.554952] mutex_lock+0x78/0xf0
[ 77.554973] vub300_enable_sdio_irq+0x103/0x3c0 [vub300]
[ 77.554981] sdio_irq_thread+0x25c/0x5b0
[ 77.555006] kthread+0x2b8/0x370
[ 77.555017] ret_from_fork+0x1f/0x30
[ 77.555023] </TASK>
[ 77.555025] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/hdmi: fix memory corruption with too many bridges
Add the missing sanity check on the bridge counter to avoid corrupting
data beyond the fixed-sized bridge array in case there are ever more
than eight bridges.
Patchwork: https://patchwork.freedesktop.org/patch/502670/ |
| In the Linux kernel, the following vulnerability has been resolved:
net: hinic: fix memory leak when reading function table
When the input parameter idx meets the expected case option in
hinic_dbg_get_func_table(), read_data is not released. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8173: Enable IRQ when pdata is ready
If the device does not come straight from reset, we might receive an IRQ
before we are ready to handle it.
[ 2.334737] Unable to handle kernel read from unreadable memory at virtual address 00000000000001e4
[ 2.522601] Call trace:
[ 2.525040] regmap_read+0x1c/0x80
[ 2.528434] mt8173_afe_irq_handler+0x40/0xf0
...
[ 2.598921] start_kernel+0x338/0x42c |
| In the Linux kernel, the following vulnerability has been resolved:
IB/hfi1: Fix possible panic during hotplug remove
During hotplug remove it is possible that the update counters work
might be pending, and may run after memory has been freed.
Cancel the update counters work before freeing memory. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
syzkaller reported [0] memory leaks of an UDP socket and ZEROCOPY
skbs. We can reproduce the problem with these sequences:
sk = socket(AF_INET, SOCK_DGRAM, 0)
sk.setsockopt(SOL_SOCKET, SO_TIMESTAMPING, SOF_TIMESTAMPING_TX_SOFTWARE)
sk.setsockopt(SOL_SOCKET, SO_ZEROCOPY, 1)
sk.sendto(b'', MSG_ZEROCOPY, ('127.0.0.1', 53))
sk.close()
sendmsg() calls msg_zerocopy_alloc(), which allocates a skb, sets
skb->cb->ubuf.refcnt to 1, and calls sock_hold(). Here, struct
ubuf_info_msgzc indirectly holds a refcnt of the socket. When the
skb is sent, __skb_tstamp_tx() clones it and puts the clone into
the socket's error queue with the TX timestamp.
When the original skb is received locally, skb_copy_ubufs() calls
skb_unclone(), and pskb_expand_head() increments skb->cb->ubuf.refcnt.
This additional count is decremented while freeing the skb, but struct
ubuf_info_msgzc still has a refcnt, so __msg_zerocopy_callback() is
not called.
The last refcnt is not released unless we retrieve the TX timestamped
skb by recvmsg(). Since we clear the error queue in inet_sock_destruct()
after the socket's refcnt reaches 0, there is a circular dependency.
If we close() the socket holding such skbs, we never call sock_put()
and leak the count, sk, and skb.
TCP has the same problem, and commit e0c8bccd40fc ("net: stream:
purge sk_error_queue in sk_stream_kill_queues()") tried to fix it
by calling skb_queue_purge() during close(). However, there is a
small chance that skb queued in a qdisc or device could be put
into the error queue after the skb_queue_purge() call.
In __skb_tstamp_tx(), the cloned skb should not have a reference
to the ubuf to remove the circular dependency, but skb_clone() does
not call skb_copy_ubufs() for zerocopy skb. So, we need to call
skb_orphan_frags_rx() for the cloned skb to call skb_copy_ubufs().
[0]:
BUG: memory leak
unreferenced object 0xffff88800c6d2d00 (size 1152):
comm "syz-executor392", pid 264, jiffies 4294785440 (age 13.044s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 cd af e8 81 00 00 00 00 ................
02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace:
[<0000000055636812>] sk_prot_alloc+0x64/0x2a0 net/core/sock.c:2024
[<0000000054d77b7a>] sk_alloc+0x3b/0x800 net/core/sock.c:2083
[<0000000066f3c7e0>] inet_create net/ipv4/af_inet.c:319 [inline]
[<0000000066f3c7e0>] inet_create+0x31e/0xe40 net/ipv4/af_inet.c:245
[<000000009b83af97>] __sock_create+0x2ab/0x550 net/socket.c:1515
[<00000000b9b11231>] sock_create net/socket.c:1566 [inline]
[<00000000b9b11231>] __sys_socket_create net/socket.c:1603 [inline]
[<00000000b9b11231>] __sys_socket_create net/socket.c:1588 [inline]
[<00000000b9b11231>] __sys_socket+0x138/0x250 net/socket.c:1636
[<000000004fb45142>] __do_sys_socket net/socket.c:1649 [inline]
[<000000004fb45142>] __se_sys_socket net/socket.c:1647 [inline]
[<000000004fb45142>] __x64_sys_socket+0x73/0xb0 net/socket.c:1647
[<0000000066999e0e>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<0000000066999e0e>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
[<0000000017f238c1>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
BUG: memory leak
unreferenced object 0xffff888017633a00 (size 240):
comm "syz-executor392", pid 264, jiffies 4294785440 (age 13.044s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 2d 6d 0c 80 88 ff ff .........-m.....
backtrace:
[<000000002b1c4368>] __alloc_skb+0x229/0x320 net/core/skbuff.c:497
[<00000000143579a6>] alloc_skb include/linux/skbuff.h:1265 [inline]
[<00000000143579a6>] sock_omalloc+0xaa/0x190 net/core/sock.c:2596
[<00000000be626478>] msg_zerocopy_alloc net/core/skbuff.c:1294 [inline]
[<00000000be626478>]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Avoid field-overflowing memcpy()
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use flexible arrays instead of zero-element arrays (which look like they
are always overflowing) and split the cross-field memcpy() into two halves
that can be appropriately bounds-checked by the compiler.
We were doing:
#define ETH_HLEN 14
#define VLAN_HLEN 4
...
#define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN)
...
struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi);
...
struct mlx5_wqe_eth_seg *eseg = &wqe->eth;
struct mlx5_wqe_data_seg *dseg = wqe->data;
...
memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE);
target is wqe->eth.inline_hdr.start (which the compiler sees as being
2 bytes in size), but copying 18, intending to write across start
(really vlan_tci, 2 bytes). The remaining 16 bytes get written into
wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr
(8 bytes).
struct mlx5e_tx_wqe {
struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */
struct mlx5_wqe_eth_seg eth; /* 16 16 */
struct mlx5_wqe_data_seg data[]; /* 32 0 */
/* size: 32, cachelines: 1, members: 3 */
/* last cacheline: 32 bytes */
};
struct mlx5_wqe_eth_seg {
u8 swp_outer_l4_offset; /* 0 1 */
u8 swp_outer_l3_offset; /* 1 1 */
u8 swp_inner_l4_offset; /* 2 1 */
u8 swp_inner_l3_offset; /* 3 1 */
u8 cs_flags; /* 4 1 */
u8 swp_flags; /* 5 1 */
__be16 mss; /* 6 2 */
__be32 flow_table_metadata; /* 8 4 */
union {
struct {
__be16 sz; /* 12 2 */
u8 start[2]; /* 14 2 */
} inline_hdr; /* 12 4 */
struct {
__be16 type; /* 12 2 */
__be16 vlan_tci; /* 14 2 */
} insert; /* 12 4 */
__be32 trailer; /* 12 4 */
}; /* 12 4 */
/* size: 16, cachelines: 1, members: 9 */
/* last cacheline: 16 bytes */
};
struct mlx5_wqe_data_seg {
__be32 byte_count; /* 0 4 */
__be32 lkey; /* 4 4 */
__be64 addr; /* 8 8 */
/* size: 16, cachelines: 1, members: 3 */
/* last cacheline: 16 bytes */
};
So, split the memcpy() so the compiler can reason about the buffer
sizes.
"pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe
nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object
code changes (i.e. only source line number induced differences and
optimizations). |
| In the Linux kernel, the following vulnerability has been resolved:
blk-throttle: Set BIO_THROTTLED when bio has been throttled
1.In current process, all bio will set the BIO_THROTTLED flag
after __blk_throtl_bio().
2.If bio needs to be throttled, it will start the timer and
stop submit bio directly. Bio will submit in
blk_throtl_dispatch_work_fn() when the timer expires.But in
the current process, if bio is throttled. The BIO_THROTTLED
will be set to bio after timer start. If the bio has been
completed, it may cause use-after-free blow.
BUG: KASAN: use-after-free in blk_throtl_bio+0x12f0/0x2c70
Read of size 2 at addr ffff88801b8902d4 by task fio/26380
dump_stack+0x9b/0xce
print_address_description.constprop.6+0x3e/0x60
kasan_report.cold.9+0x22/0x3a
blk_throtl_bio+0x12f0/0x2c70
submit_bio_checks+0x701/0x1550
submit_bio_noacct+0x83/0xc80
submit_bio+0xa7/0x330
mpage_readahead+0x380/0x500
read_pages+0x1c1/0xbf0
page_cache_ra_unbounded+0x471/0x6f0
do_page_cache_ra+0xda/0x110
ondemand_readahead+0x442/0xae0
page_cache_async_ra+0x210/0x300
generic_file_buffered_read+0x4d9/0x2130
generic_file_read_iter+0x315/0x490
blkdev_read_iter+0x113/0x1b0
aio_read+0x2ad/0x450
io_submit_one+0xc8e/0x1d60
__se_sys_io_submit+0x125/0x350
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Allocated by task 26380:
kasan_save_stack+0x19/0x40
__kasan_kmalloc.constprop.2+0xc1/0xd0
kmem_cache_alloc+0x146/0x440
mempool_alloc+0x125/0x2f0
bio_alloc_bioset+0x353/0x590
mpage_alloc+0x3b/0x240
do_mpage_readpage+0xddf/0x1ef0
mpage_readahead+0x264/0x500
read_pages+0x1c1/0xbf0
page_cache_ra_unbounded+0x471/0x6f0
do_page_cache_ra+0xda/0x110
ondemand_readahead+0x442/0xae0
page_cache_async_ra+0x210/0x300
generic_file_buffered_read+0x4d9/0x2130
generic_file_read_iter+0x315/0x490
blkdev_read_iter+0x113/0x1b0
aio_read+0x2ad/0x450
io_submit_one+0xc8e/0x1d60
__se_sys_io_submit+0x125/0x350
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 0:
kasan_save_stack+0x19/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x1b/0x30
__kasan_slab_free+0x111/0x160
kmem_cache_free+0x94/0x460
mempool_free+0xd6/0x320
bio_free+0xe0/0x130
bio_put+0xab/0xe0
bio_endio+0x3a6/0x5d0
blk_update_request+0x590/0x1370
scsi_end_request+0x7d/0x400
scsi_io_completion+0x1aa/0xe50
scsi_softirq_done+0x11b/0x240
blk_mq_complete_request+0xd4/0x120
scsi_mq_done+0xf0/0x200
virtscsi_vq_done+0xbc/0x150
vring_interrupt+0x179/0x390
__handle_irq_event_percpu+0xf7/0x490
handle_irq_event_percpu+0x7b/0x160
handle_irq_event+0xcc/0x170
handle_edge_irq+0x215/0xb20
common_interrupt+0x60/0x120
asm_common_interrupt+0x1e/0x40
Fix this by move BIO_THROTTLED set into the queue_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove()
In fsl_mc_bus_remove(), mc->root_mc_bus_dev->mc_io is passed to
fsl_destroy_mc_io(). However, mc->root_mc_bus_dev is already freed in
fsl_mc_device_remove(). Then reference to mc->root_mc_bus_dev->mc_io
triggers KASAN use-after-free. To avoid the use-after-free, keep the
reference to mc->root_mc_bus_dev->mc_io in a local variable and pass to
fsl_destroy_mc_io().
This patch needs rework to apply to kernels older than v5.15. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not clean up repair bio if submit fails
The submit helper will always run bio_endio() on the bio if it fails to
submit, so cleaning up the bio just leads to a variety of use-after-free
and NULL pointer dereference bugs because we race with the endio
function that is cleaning up the bio. Instead just return BLK_STS_OK as
the repair function has to continue to process the rest of the pages,
and the endio for the repair bio will do the appropriate cleanup for the
page that it was given. |
