| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix wrong setting of max_corr_read_errors
There is no input check when echo md/max_read_errors and overflow might
occur. Add check of input number. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev/ep93xx-fb: Do not assign to struct fb_info.dev
Do not assing the Linux device to struct fb_info.dev. The call to
register_framebuffer() initializes the field to the fbdev device.
Drivers should not override its value.
Fixes a bug where the driver incorrectly decreases the hardware
device's reference counter and leaks the fbdev device.
v2:
* add Fixes tag (Dan) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211_hwsim: drop short frames
While technically some control frames like ACK are shorter and
end after Address 1, such frames shouldn't be forwarded through
wmediumd or similar userspace, so require the full 3-address
header to avoid accessing invalid memory if shorter frames are
passed in. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Wait for io return on terminate rport
System crash due to use after free.
Current code allows terminate_rport_io to exit before making
sure all IOs has returned. For FCP-2 device, IO's can hang
on in HW because driver has not tear down the session in FW at
first sign of cable pull. When dev_loss_tmo timer pops,
terminate_rport_io is called and upper layer is about to
free various resources. Terminate_rport_io trigger qla to do
the final cleanup, but the cleanup might not be fast enough where it
leave qla still holding on to the same resource.
Wait for IO's to return to upper layer before resources are freed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: dp: Change logging to dev for mtk_dp_aux_transfer()
Change logging from drm_{err,info}() to dev_{err,info}() in functions
mtk_dp_aux_transfer() and mtk_dp_aux_do_transfer(): this will be
essential to avoid getting NULL pointer kernel panics if any kind
of error happens during AUX transfers happening before the bridge
is attached.
This may potentially start happening in a later commit implementing
aux-bus support, as AUX transfers will be triggered from the panel
driver (for EDID) before the mtk-dp bridge gets attached, and it's
done in preparation for the same. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc: Don't try to copy PPR for task with NULL pt_regs
powerpc sets up PF_KTHREAD and PF_IO_WORKER with a NULL pt_regs, which
from my (arguably very short) checking is not commonly done for other
archs. This is fine, except when PF_IO_WORKER's have been created and
the task does something that causes a coredump to be generated. Then we
get this crash:
Kernel attempted to read user page (160) - exploit attempt? (uid: 1000)
BUG: Kernel NULL pointer dereference on read at 0x00000160
Faulting instruction address: 0xc0000000000c3a60
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=32 NUMA pSeries
Modules linked in: bochs drm_vram_helper drm_kms_helper xts binfmt_misc ecb ctr syscopyarea sysfillrect cbc sysimgblt drm_ttm_helper aes_generic ttm sg libaes evdev joydev virtio_balloon vmx_crypto gf128mul drm dm_mod fuse loop configfs drm_panel_orientation_quirks ip_tables x_tables autofs4 hid_generic usbhid hid xhci_pci xhci_hcd usbcore usb_common sd_mod
CPU: 1 PID: 1982 Comm: ppc-crash Not tainted 6.3.0-rc2+ #88
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c0000000000c3a60 LR: c000000000039944 CTR: c0000000000398e0
REGS: c0000000041833b0 TRAP: 0300 Not tainted (6.3.0-rc2+)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 88082828 XER: 200400f8
...
NIP memcpy_power7+0x200/0x7d0
LR ppr_get+0x64/0xb0
Call Trace:
ppr_get+0x40/0xb0 (unreliable)
__regset_get+0x180/0x1f0
regset_get_alloc+0x64/0x90
elf_core_dump+0xb98/0x1b60
do_coredump+0x1c34/0x24a0
get_signal+0x71c/0x1410
do_notify_resume+0x140/0x6f0
interrupt_exit_user_prepare_main+0x29c/0x320
interrupt_exit_user_prepare+0x6c/0xa0
interrupt_return_srr_user+0x8/0x138
Because ppr_get() is trying to copy from a PF_IO_WORKER with a NULL
pt_regs.
Check for a valid pt_regs in both ppc_get/ppr_set, and return an error
if not set. The actual error value doesn't seem to be important here, so
just pick -EINVAL.
[mpe: Trim oops in change log, add Fixes & Cc stable] |
| In the Linux kernel, the following vulnerability has been resolved:
genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()
If ipi_send_{mask|single}() is called with an invalid interrupt number, all
the local variables there will be NULL. ipi_send_verify() which is invoked
from these functions does verify its 'data' parameter, resulting in a
kernel oops in irq_data_get_affinity_mask() as the passed NULL pointer gets
dereferenced.
Add a missing NULL pointer check in ipi_send_verify()...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Holistic IT, Consultancy Coop. Workcube ERP allows Reflected XSS.This issue affects Workcube ERP: from V12 - V14 before Cognitive. |
| In the Linux kernel, the following vulnerability has been resolved:
rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails
If getting an ID or setting up a work queue in rbd_dev_create() fails,
use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts
is triggered in do_rbd_add(). The root cause is that the ownership of
these structures is transfered to rbd_dev prematurely and they all end
up getting freed when rbd_dev_create() calls rbd_dev_free() prior to
returning to do_rbd_add().
Found by Linux Verification Center (linuxtesting.org) with SVACE, an
incomplete patch submitted by Natalia Petrova <n.petrova@fintech.ru>. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in E1 Informatics Web Application allows SQL Injection.This issue affects Web Application: through 20250916.
NOTE: The vendor did not inform about the completion of the fixing process within the specified time. The CVE will be updated when new information becomes available. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Zirve Information Technologies Inc. Zirve Nova allows Cross-Site Scripting (XSS).This issue affects Zirve Nova: from 235 through 20250131. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting'), Improper Restriction of Rendered UI Layers or Frames vulnerability in Mevzuattr Software MevzuatTR allows Phishing, iFrame Overlay, Clickjacking, Forceful Browsing. This issue needs high privileges. This issue affects MevzuatTR: before 12.02.2025. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Shopside Software Shopside App allows Cross-Site Scripting (XSS). This issue requires high privileges.This issue affects Shopside App: before 17.02.2025. |
| The Quiz Maker plugin for WordPress is vulnerable to SQL Injection via spoofed IP headers in all versions up to, and including, 6.7.0.56 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is only exploitable in configurations where the server is set up to retrieve the IP from a user-supplied field like `X-Forwarded-For` and limit users by IP is enabled. |
| The Developer Loggers for Simple History plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 0.5 via the enabled_loggers parameter. This makes it possible for authenticated attackers, with Administrator-level access and above, to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. |
| The WP Import – Ultimate CSV XML Importer for WordPress plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 7.28. This is due to the write_to_customfile() function writing unfiltered PHP code to a file. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject the customFunction.php file with PHP code that can be accessed to trigger remote code execution. |
| The WP Import – Ultimate CSV XML Importer for WordPress plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the upload_function() function in all versions up to, and including, 7.27. This makes it possible for authenticated attackers, with Subscriber-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). |
| The Memberlite Shortcodes plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugins's 'row' shortcode in all versions up to, and including, 1.4 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Catch Dark Mode plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 2.0 via the 'catch_dark_mode' shortcode. This makes it possible for authenticated attackers, with Contributor-level access and above, to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. |
| The Social Media Shortcodes plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'twitter' shortcode in all versions up to, and including, 1.3.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
