| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post()
qrtr_endpoint_post() validates an incoming packet with
if (!size || len != ALIGN(size, 4) + hdrlen)
goto err;
where size comes from the wire. On 32-bit, size_t is 32 bits and
ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check
passes and skb_put_data(skb, data + hdrlen, size) writes past the
hdrlen-sized skb and oopses the kernel. 64-bit is unaffected.
This is the 32-bit residual of ad9d24c9429e2 ("net: qrtr: fix OOB
Read in qrtr_endpoint_post"), which fixed only the 64-bit case.
Reject any size that cannot fit the buffer before the ALIGN. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: restrict socket queue dumps in enqueue tracepoints
tipc_sk_enqueue() runs with sk->sk_lock.slock held while the socket is
owned by user context. The spinlock protects the backlog queue in this
path, but it does not serialize against the socket owner consuming or
purging sk_receive_queue.
KASAN reported:
CPU: 14 UID: 0 PID: 1050 Comm: tipc3 Not tainted 7.1.0-rc6+ #126 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0 lib/dump_stack.c:123
print_report+0xce/0x5b0 mm/kasan/report.c:482
kasan_report+0xc6/0x100 mm/kasan/report.c:597
__asan_report_load4_noabort+0x14/0x30 mm/kasan/report_generic.c:380
tipc_skb_dump+0x1327/0x16f0 net/tipc/trace.c:73
tipc_list_dump+0x208/0x2e0 net/tipc/trace.c:187
tipc_sk_dump+0xaf6/0xd60 net/tipc/socket.c:3996
trace_event_raw_event_tipc_sk_class+0x312/0x5a0 net/tipc/trace.h:188
tipc_sk_rcv+0xb1d/0x1d50 net/tipc/socket.c:2497
tipc_node_xmit+0x1c3/0x1440 net/tipc/node.c:1689
__tipc_sendmsg+0x97a/0x1440 net/tipc/socket.c:1512
tipc_sendmsg+0x52/0x80 net/tipc/socket.c:1400
sock_sendmsg+0x2f6/0x3e0 net/socket.c:825
splice_to_socket+0x7f9/0x1010 fs/splice.c:884
do_splice+0xe21/0x2330 fs/splice.c:936
__do_splice+0x153/0x260 fs/splice.c:1431
__x64_sys_splice+0x150/0x230 fs/splice.c:1616
x64_sys_call+0xeb5/0x2790 arch/x86/entry/syscall_64.c:41
do_syscall_64+0xf3/0x620 arch/x86/entry/syscall_64.c:63
entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:130
RIP: 0033:0x71624e8aafe2
Code: 08 0f 85 71 3a ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66
RSP: 002b:0000716157ffed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000113
RAX: ffffffffffffffda RBX: 0000716157fff6c0 RCX: 000071624e8aafe2
RDX: 000000000000005f RSI: 0000000000000000 RDI: 0000000000000066
RBP: 0000716157ffed90 R08: 0000000000008000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffff00
R13: 0000000000000021 R14: 0000000000000000 R15: 00007fff89799c40
</TASK>
The TIPC_DUMP_ALL tracepoints in tipc_sk_enqueue() also dump
sk_receive_queue and can therefore dereference skbs that the socket
owner has already dequeued or freed. Restrict these dumps to
TIPC_DUMP_SK_BKLGQ, which matches the queue protected by the held
spinlock.
Keep the change limited to the enqueue path, where the unsafe queue dump
is reachable while the socket is owned by user context. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: guard io_size EOF trim against concurrent truncate underflow
iomap: fix zero padding data issue in concurrent append writes
changed ioend accounting so that io_size tracks only valid data
within EOF. This trims io_size when a writeback range extends
past end_pos:
ioend->io_size += map_len;
if (ioend->io_offset + ioend->io_size > end_pos)
ioend->io_size = end_pos - ioend->io_offset;
However, if end_pos ends up below ioend->io_offset, the subtraction
becomes negative and is stored in size_t io_size, causing an unsigned
wrap to a huge value. This can happen when writeback continues past
byte-level EOF up to a block-aligned range, or when a concurrent
truncate shrinks the file after end_pos was sampled in
iomap_writeback_handle_eof().
A wrapped io_size can mislead append detection and corrupt
completion-time size handling, since filesystem end_io paths consume
io_size for decisions such as on-disk EOF updates and unwritten/COW
completion ranges.
Fix this by clamping io_size to zero when EOF has moved to or before
the ioend start offset. This preserves the original intent of trimming
io_size to valid in-EOF data while avoiding the underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix double unlock in nomem_d_alloc error path
When start_creating() fails and returns -ENOMEM, it has already
released the parent directory lock in __start_dirop():
static struct dentry *__start_dirop(...)
{
...
inode_lock_nested(dir, I_MUTEX_PARENT);
dentry = lookup_one_qstr_excl(name, parent, lookup_flags);
if (IS_ERR(dentry))
inode_unlock(dir); <-- Lock released on error
return dentry;
}
However, the nomem_d_alloc error path in cachefiles_get_directory()
unconditionally calls inode_unlock(d_inode(dir)) again, causing a
double unlock that corrupts the rwsem state.
This is a leftover from commit 7ab96df840e60 which replaced manual
locking with start_creating() but failed to update the nomem_d_alloc
path (while correctly updating mkdir_error and lookup_error paths). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix lack of locking around modifications of net->cells_dyn_ino
Fix the lack of locking around modifications of net->cells_dyn_ino by
taking net->cells_lock exclusively. This also requires to cell to be
removed from net->cells_dyn_ino in afs_destroy_cell_work() rather than in
afs_cell_destroy() as the latter runs in RCU cleanup context and sleeping
locks cannot be taken there. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix missing NULL pointer check in afs_break_some_callbacks()
Fix afs_break_some_callbacks() to check to see if afs_lookup_volume_rcu()
returned NULL (e.g. the specified volume is unknown). |
| Exposure of data element to wrong session vulnerability in the JSON plugin of Apache Struts. Per-response serialization state could be shared across concurrent requests, allowing response content associated with one request to become observable in another. Only the SMD / JSON-RPC handling of the JSON interceptor is affected, which is not enabled by default; applications using the json result type are not affected.
This issue affects Apache Struts: 7.2.1.
Users are recommended to upgrade to version 7.3.0, which fixes the issue. |
| Exposure of data element to wrong session vulnerability in the JSON plugin of Apache Struts. Per-request parsing state could be shared across concurrent requests, allowing data associated with one request to become observable in another, and configured parsing limits not to be enforced as intended. Populating actions from a JSON request body is not enabled by default; applications that do not use the JSON plugin are not affected.
This issue affects Apache Struts: 7.2.1.
Users are recommended to upgrade to version 7.3.0, which fixes the issue. |
| Allocation of resources without limits or throttling vulnerability in Apache Struts. When no fixed locale is configured, the locale used for localized-text lookups is taken from the incoming request, allowing an unauthenticated remote client to cause the framework's internal localized-text caches to grow without bound and exhaust the Java heap, denying service to other users. Applications that configure a fixed locale are not affected.
This issue affects Apache Struts: from 2.0.0 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1.
Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue. |
| Uncontrolled resource consumption vulnerability in Apache Struts. An application that exposes an endpoint collecting Content Security Policy violation reports reads the submitted report into memory without bounding how much it will accept, so a single request can exhaust the heap and deny service to other users. Such endpoints are ordinarily reachable without authentication. The core distribution maps no such endpoint by default; applications that do not collect violation reports are not affected.
This issue affects Apache Struts: from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1.
Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: retrieve ethhdr after potential skb realloc on RX
pskb_may_pull() in batadv_interface_rx() could reallocate the buffer behind
the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free.
This was done correctly for the VLAN header but missed for the ethernet
header which is later used for the TT and AP isolation handling. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd/brs: Fix kernel address leakage
A user-only branch stack can contain branches that originate from
the kernel. As a result, kernel addresses are exposed to user space
even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors
supporting X86_FEATURE_BRS (Zen 3 only), perf can still report entries
such as SYSRET/interrupt returns for which the branch-from addresses
are in the kernel.
E.g.
$ perf record -j any,u -c 4000 -e branch-brs -o - -- \
perf bench syscall basic --loop 1000 | \
perf script -i - -F brstack|tr ' ' '\n'| \
grep -E '0x[89a-f][0-9a-f]{15}'
...
0xffffffff810001c4/0x72e2e32955eb/-/-/-/0//-
0xffffffff810001c4/0x72e2d94a9821/-/-/-/0//-
0xffffffff810001c4/0x72e2d94ffa1b/-/-/-/0//-
...
BRS provides no hardware branch filtering, so privilege level
filtering is performed entirely in software. However, amd_brs_match_plm()
only validates the branch-to address against the requested privilege
levels. For branches from the kernel to user space, the branch-from
address is left unchecked and is leaked. Extend the software filter to
also validate the branch-from address, so that any branch record whose
branch-from address is in the kernel is dropped when
PERF_SAMPLE_BRANCH_USER is requested. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/boot: Validate console=uart8250 baud rate to fix early boot hang
When the baud rate is empty, 0, invalid, or overflows to 0 when stored
as an int, the system will hang during early boot because of a division
by zero in early_serial_init().
Fall back to DEFAULT_BAUD when the resulting baud rate is 0 to prevent
an early system hang. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-control: Use overflow checks in control_update size calc
In sof_ipc3_control_update(), the expected_size calculation uses
firmware-provided cdata->num_elems in arithmetic that could overflow
on 32-bit platforms, wrapping to a small value. This would allow the
cdata->rhdr.hdr.size comparison to pass with mismatched sizes,
potentially leading to out-of-bounds access in snd_sof_update_control.
Use check_mul_overflow() and check_add_overflow() to detect and reject
overflowed size calculations. |
| In the Linux kernel, the following vulnerability has been resolved:
VDUSE: avoid leaking information to userspace
The bounceing is not necessarily page aligned, so current VDUSE can
leak kernel information through mapping bounce pages to
userspace. Allocate bounce pages with __GFP_ZERO to avoid leaking
information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: fix refcount leak in mlxsw_sp_port_lag_join()
When mlxsw_sp_port_lag_index_get() fails, mlxsw_sp_port_lag_join()
returns an error without releasing the lag reference obtained by
the earlier mlxsw_sp_lag_get(). All other error paths in the
function jump to the cleanup label that ends with
mlxsw_sp_lag_put(), so this is a single missed release.
Fix the leak by replacing the bare 'return err' with a goto to the
existing error cleanup label, which will drop the reference safely. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix overflow in passthrough ioctl bounds check
smb2_ioctl_query_info() validates the PASSTHRU_FSCTL response payload
before copying it to userspace.
The payload offset and length both come from 32-bit fields. The bounds
check currently adds OutputOffset and qi.input_buffer_length directly, so
the addition can wrap in 32-bit arithmetic before the result is compared
against the response buffer length.
A malicious server can use a large OutputOffset and a small OutputCount
to make the wrapped sum pass the bounds check. The later copy_to_user()
then reads from io_rsp + OutputOffset, outside the response buffer.
Use size_add() for the offset plus length check so overflow is treated as
out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: free madvise VMA array on L2 flush failure
xe_vm_madvise_ioctl() allocates madvise_range.vmas in get_vmas().
After get_vmas() succeeds with at least one VMA, error paths must go
through free_vmas so the array is released before the madvise details are
destroyed.
The L2 flush validation path added for PAT madvise rejects some
SVM/userptr ranges after get_vmas() has succeeded, but jumps directly to
madv_fini. This skips kfree(madvise_range.vmas), leaking the VMA array on
each failed ioctl.
Jump to free_vmas instead, matching the other validation failure paths
after get_vmas() has succeeded.
(cherry picked from commit c3a1c3579b1250060da73507a4acef712974c78a) |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK
Compare against -EDEADLK, which is what ww_mutex_lock() actually
returns and what every other deadlock check in this file already uses.
Function regulator_lock_two() acquires two regulators via
regulator_lock_nested() -> ww_mutex_lock(). On contention,
ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop
the lock it holds and retry the acquisition in the canonical order.
However, regulator_lock_two() tests the return value against -EDEADLOCK
rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are
the same value, so the comparison happens to be correct and the bug is
invisible. But on MIPS, SPARC, and PowerPC, those two errors have
different values. The test is wrong: a genuine -EDEADLK backoff no
longer matches -EDEADLOCK, so instead of unlocking and retrying, the
code falls into WARN_ON(ret) and returns with only one of the two
regulators locked.
In practice, this is a bug only on MIPS, because the regulator core is
not built or used on the other two platforms.
In general, EDEADLK is preferred over EDEADLOCK for new code. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix busy dentry warning on unmount after DIO
Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed
the issue in cifs where deferred close of a file led to a dentry reference
count not being released in umount, by flushing deferredclose_wq in
cifs_kill_sb() to solve it.
However, the cifs DIO path suffers from the same busy-dentry problem caused
by a delayed dentry reference-count release:
[dio] [cifsd] [close + umount]
netfs_unbuffered_write_iter_locked
...
cifs_demultiplex_thread
netfs_unbuffered_write
cifs_issue_write
netfs_wait_for_in_progress_stream [1]
...
netfs_write_subrequest_terminated
netfs_subreq_clear_in_progress
netfs_wake_collector // wake [1]
netfs_put_subrequest
netfs_put_request
queue_work(system_dfl_wq, xxx) [2]
// dio write return cifs_close
_cifsFileInfo_put
// cfile->count 2->1
--cfile->count [3]
// umount
cifs_kill_sb
kill_anon_super
// warning triggered!
shrink_dcache_for_umount [4]
[system_dfl_wq] [5]
netfs_free_request
...
_cifsFileInfo_put
// cfile->count 1->0
--cfile->count
queue_work(fileinfo_put_wq, xxx)
[fileinfo_put_wq] [6]
cifsFileInfo_put_work
cifsFileInfo_put_final
dput
If the umount path is triggered before [5], it results warning:
BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1)
[unmount of cifs cifs]
The existing per-inode ictx->io_count wait in cifs_evict_inode() does not
help: it lives in the inode eviction path, which runs after
shrink_dcache_for_umount() has already warned about the busy dentries.
Fix it by adding a per-superblock outstanding-rreq counter that is
incremented in cifs_init_request() and decremented in cifs_free_request().
In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach
0 - which guarantees that all cleanup_work for this sb have run and thus
all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq.
Then drain the workqueue so the dentry refs are dropped.
This is a targeted wait, not a flush of the system-wide system_dfl_wq. |
