| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap-based buffer overflow in Windows Biometric Service allows an authorized attacker to disclose information locally. |
| Heap-based buffer overflow in Windows Background Intelligent Transfer Service (BITS) allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: check a submount for references right before unmounting it
shrink_submounts() and mark_mounts_for_expiry() first collect all the
mounts they are allowed to unmount and then unmount them.
Whether a mount is busy is decided by propagate_mount_busy() on the
tree. But unmounting the first mount changes the tree that the second
one propagates into. propagate_umount()
moves a surviving overmount off a copy it unmounts and mounts it where
the copy was mounted. If that's where the propagated copy of the second
victim is looked up the overmount becomes a candidate of the second
umount_tree(). It's childless and so trim_one() commits it without
looking at its reference count.
So a synchronous umount pulls out a busy mount that is in use somewhere
else and marks it MNT_SYNC_UMOUNT while it has users:
umount2(/tmp/plshrink/p1, 0) = 0 errno 0
cwd is (unreachable)
The same two umounts requested one after the other fail with EBUSY.
This needs a mount with MNT_SHRINKABLE, i.e., automounted submounts of
NFS, AFS and CIFS or the tracefs mount below debugfs. Bind mounts
inherit the flag.
Check each mount right before it is unmounted under the same hold of
namespace_sem and mount_lock as the umount itself. Make sure that the
algorithm stays linear. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: reset the old parent's ->overmount in mnt_change_mountpoint()
__umount_mnt() resets ->overmount of the parent when it unmounts the
mount that overmounts it. mnt_change_mountpoint() doesn't. It moves the
mount to its new parent and leaves the old one pointing at it.
For a mount that is moved beneath in attach_recursive_mnt() that doesn't
matter. The new mount has already reset ->overmount of the old parent by
the time the old top mount is moved onto it.
It matters for reparent() though. propagate_umount() moves a surviving
overmount onto the first ancestor that isn't going to be unmounted. The
mount it was taken from is unmounted immediately afterwards. If a file
descriptor keeps that unmounted mount alive ->overmount points at the
moved mount. That's a dangling pointer and UAF as the moved mount is
unmounted and freed.
do_lock_mount() follows ->overmount from the target path under
mount_lock. With a file descriptor on such a mount as the target of a
mount beneath topmost_overmount() walks into the freed mount and
do_lock_mount() takes references on whatever it finds there.
So reset ->overmount of the old parent in mnt_change_mountpoint() the
same way __umount_mnt() does. A mount's ->overmount is then always a
mount that is attached to it. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: don't silently unmount busy mounts
The propagate_mount_busy() helper exists to decide whether a synchronous
can suceed. It does that by looking at the copies of the victims in the
mounts its parent propagates to. One of those functions from propagation
hell.
It skips a copy that has child mounts except for the case of a single
child mount covering the copy's root. That algorithm used to be exact.
It isn't anymore.
Originally only childless copies were unmounted during propagation.
And 1064f874abc0 ("mnt: Tuck mounts under others instead of creating
shadow/side mounts.") ended up adding covered mounts to both sides in
one go.
Along came 99b19d16471e ("mnt: In propgate_umount handle visiting mounts
in any order") and that started to unmount more than before:
[1]: A copy of a mount is unmounted when each of its children is either
its overmount or a copy of the victim itself. In the former case
the overmount gets reparented. In the latter case the copy of the
victim will end up being unmounted.
So propagate_umount() ended up being rewritten without adjusting
propagate_mount_busy(). And currently propagate_mount_busy() doesn't
look at copies of the victim that have two or more children nor a single
child that is not the overmount.
So any such copy in [1] is not checked for
references. The result is that a synchronous unmount succeeds, pulling
out a mount that is still in use.
A container can run into this with its own mounts. The host shares a
tree with the container and the host has a mount in that tree:
mount -t tmpfs none /mnt
mount --make-shared /mnt
mount -t tmpfs none /mnt/a
The container's /mnt is a slave copy of the host mount. The container
now takes a detached copy of the tree and mounts that copy beneath its
propagated copy of /mnt/a and keeps the file descriptor to the tree
open:
unshare -m --propagation unchanged
mount --make-rslave /
fd = open_tree(AT_FDCWD, "/mnt", OPEN_TREE_CLONE | AT_RECURSIVE)
move_mount(fd, "", AT_FDCWD, "/mnt/a", MOVE_MOUNT_BENEATH)
grep /mnt /proc/self/mountinfo
775 355 ... /mnt ... master:646
777 775 ... /mnt/a ... master:646
776 777 ... /mnt/a ... master:647
778 777 ... /mnt/a/a ... master:647
The now attached tree (777) is now mounted beneath the container's copy
of /mnt/a. That's also where the host mount sits (as seen from the host
mount namespace). So the propagated copy (776) of the host's mount is on
top of its root and the copy of that (778) is inside it. Now the host
runs:
umount /mnt/a
and it succeeds. The moved tree tree and the copy inside of it are gone
from the container. Now only the propagated copy is left and it got
reparented to where it was before:
grep /mnt /proc/self/mountinfo
775 355 ... /mnt ... master:646
776 775 ... /mnt/a ...
But the file descriptor still refers to the moved tree. So a synchronous
umount detached a mount that is still in use.
Teach propagate_mount_busy() the same checks that propagate_umount()
does. It now checks for a single victim mount without children
for which it can assume that MNT_LOCKED is cleared on every copy like
propagate_umount() does. The copies form chains. IOW, when a copy itself
receives propagation from the victim's parent then the mount at the same
mountpoint inside that copy is a copy as well. Whether a mount receives
propagation from the victim's can simply be checked by walking its
masters. Walk each chain once from its top so we are sure that nested
copies stay linear. Check every reference once of every copy that gets
unmounted. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: only accept doorbell BOs as queue doorbell
amdgpu_userq_get_doorbell_index() pins any BO passed as doorbell_handle
into the doorbell domain. For a regular BO, TTM moves it with
ttm_bo_move_null() and its contents are lost. Since an importer on the
same device gets the exporter's GEM object, a client can do this to a
buffer another client shared with it.
Reject BOs that were not created in the doorbell domain.
v2: drop the error message, use a local abo variable (Christian)
(cherry picked from commit f7497bbc19db4821c62b9d97b31c9086feb2d917) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: th1520-dw-hdmi: Fix remove() callback
This driver stores struct th1520_hdmi * in platform drvdata, but
th1520_dw_hdmi_remove() was reading it back as struct dw_hdmi *
and passing it to dw_hdmi_remove(), so teardown runs on the wrong
pointer.
Retrieve struct th1520_hdmi * from platform drvdata and pass
hdmi->dw_hdmi to dw_hdmi_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix reading free memory in do_resume
When do_resume calls dm_table_get_mode(new_map), the call is done without
holding any locks (it only holds a reference to the md). It may be
possible that another concurrent ioctl on the same device will swap table
after dm_swap_table and before dm_table_get_mode. In this case,
dm_table_get_mode(new_map) reads freed memory.
This race condition was triggered by syzbot.
This commit fixes the race by reading mode of the new table before
dm_swap_table. Note that new_map is also passed to dm_ima_need_measure,
but this function doesn't attempt to dereference it, so this call should
be safe.
Note that this is not a security bug because only root can trigger it and
the commonly used tools such as lvm or cryptsetup do not call the ioctls
concurrently, so that they can't trigger it acceidentally. |
| In the Linux kernel, the following vulnerability has been resolved:
memstick: core: wait for request completion before freeing card
In memstick_alloc_card() and memstick_set_rw_addr(),
wait_for_completion_timeout() is used to wait for device identification
and address configuration requests to complete.
The memstick subsystem does not provide an abort or cancellation
callback in struct memstick_host for in-flight requests. If
wait_for_completion_timeout() expires (for instance, when a USB transfer
or command retry is delayed), memstick_alloc_card() returns an error and
frees the memstick_dev structure via kfree(card).
However, the host controller driver (such as rtsx_usb_ms) is still
running the request asynchronously in worker context. When the transfer
eventually finishes, the driver writes into host->req->data, which
points to memory inside the already freed card structure. This leads to
a KASAN slab-use-after-free write:
BUG: KASAN: slab-use-after-free in ms_read_bytes+0x8fe/0x990
Write of size 1 at addr ffff88813c188079 by task kworker/1:5/5239
Workqueue: events rtsx_usb_ms_handle_req
Call Trace:
ms_read_bytes+0x8fe/0x990 drivers/memstick/host/rtsx_usb_ms.c:450
rtsx_usb_ms_issue_cmd drivers/memstick/host/rtsx_usb_ms.c:477 [inline]
rtsx_usb_ms_handle_req+0x557/0x1a00 drivers/memstick/host/rtsx_usb_ms.c:531
process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396
worker_thread+0x5ef/0xe50 kernel/workqueue.c:3560
kthread+0x373/0x450 kernel/kthread.c:436
Allocated by task 1662:
memstick_alloc_card drivers/memstick/core/memstick.c:383 [inline]
memstick_check+0x2c1/0x10d0 drivers/memstick/core/memstick.c:452
process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396
Freed by task 1662:
kfree+0x20c/0x650 mm/slub.c:6792
memstick_alloc_card drivers/memstick/core/memstick.c:420 [inline]
memstick_check+0x72b/0x10d0 drivers/memstick/core/memstick.c:452
process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396
Host controller drivers (rtsx_usb_ms, jmb38x_ms, tifm_ms, r592) already
implement their own hardware and bus timeouts, and callers in
mspro_block and ms_block already rely on wait_for_completion()
unconditionally.
Replace wait_for_completion_timeout() with wait_for_completion() in
memstick_set_rw_addr() and memstick_alloc_card() so that the card
structure is never freed while an asynchronous request is in flight. |
| Insecure permissions in WikiAndPad alpha/beta v0.2alpha03 (versionCode 200300) allows unauthorized attackers to export the application's data. |
| modelscope agent-zero 1.7, 1.8, 1.9, and 1.10 is vulnerable to Directory Traversal in python/helpers/file_browser.py:FileBrowser.save_text_file. The save_text_file method accepts user-controlled file paths without normalization or validation, allowing path traversal attacks. |
| DB-GPT v0.7.5 and 0.8.0 contains directory traversal in use_example_file (packages/dbgpt-app/src/dbgpt_app/openapi/api_v1/examples_api.py:129). A remote attacker can use the validated exploitation path to write files outside the intended workspace or storage boundary. |
| SuperAGI v0.0.14 contains an improper access control vulnerability in get_agent_by_latest_execution in superagi/controllers/agent_execution.py. A remote authenticated attacker from one organization can retrieve latest execution and agent metadata for another organization's project through /agentexecutions/get/latest/agent/project/{project_id} by supplying a victim project_id. |
| TransformerOptimus SuperAGI v0.0.14 is vulnerable to Incorrect Access Control in get_agent_execution_configuration in superagi/controllers/agent_execution_config.py. A remote authenticated attacker from one organization can read another organization's agent execution configuration by supplying the victim agent_id and agent_execution_id to /agent_executions_configs/details/agent_id/{agent_id}/agent_execution_id/{agent_execution_id}. The endpoint lacks an organization ownership check on the selected agent and execution. |
| OpenBMB XAgent v1.0.0 contains directory traversal vulnerability in main-upload_file-the-preserved-live-upload-file-witness-directly-reaches (ToolServer/ToolServerNode/main.py:46). |
| A malicious actor with access to the network could exploit a Binding to an Unrestricted IP Address vulnerability found in WiFiman Desktop for macOS to obtain information about the host device. |
| A malicious actor with local access and high privileges could exploit an Improper Access Control vulnerability found in WiFiman Desktop for macOS to escalate privileges on the host device. |
| A missing release of backend receiver sessions in the Ad Hoc Transfer component of Progress Software WS_FTP Server versions prior to 2024.0.7 and 2025.0.4 on Windows could lead to server resource exhaustion and service degradation. |
| Crawl4AI before 0.9.5 contains an improper certificate validation vulnerability that allows network attackers to intercept crawls because Chromium always launches with --ignore-certificate-errors. Man-in-the-middle or DNS-controlling attackers can serve forged content to the crawler and read cookies and headers sent, while hard-coded --no-sandbox also overrides CRAWL4AI_CHROMIUM_SANDBOX. |
| Crawl4AI before 0.9.5 contains a denial of service vulnerability in the Docker API server where _clamp_untrusted() fails to cap the delay_before_return_html, mean_delay, and max_range fields of untrusted CrawlerRunConfig bodies. Unauthenticated attackers can send huge values to /crawl or /crawl/stream to hold browser pages or stall the rate limiter, exhausting the page pool and blocking other crawls. |
