| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
PRMT needs to find the correct type of block to translate the PA-VA
mapping for EFI runtime services.
The issue arises because the PRMT is finding a block of type
EFI_CONVENTIONAL_MEMORY, which is not appropriate for runtime services
as described in Section 2.2.2 (Runtime Services) of the UEFI
Specification [1]. Since the PRM handler is a type of runtime service,
this causes an exception when the PRM handler is called.
[Firmware Bug]: Unable to handle paging request in EFI runtime service
WARNING: CPU: 22 PID: 4330 at drivers/firmware/efi/runtime-wrappers.c:341
__efi_queue_work+0x11c/0x170
Call trace:
Let PRMT find a block with EFI_MEMORY_RUNTIME for PRM handler and PRM
context.
If no suitable block is found, a warning message will be printed, but
the procedure continues to manage the next PRM handler.
However, if the PRM handler is actually called without proper allocation,
it would result in a failure during error handling.
By using the correct memory types for runtime services, ensure that the
PRM handler and the context are properly mapped in the virtual address
space during runtime, preventing the paging request error.
The issue is really that only memory that has been remapped for runtime
by the firmware can be used by the PRM handler, and so the region needs
to have the EFI_MEMORY_RUNTIME attribute.
[ rjw: Subject and changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
sched/core: Disable page allocation in task_tick_mm_cid()
With KASAN and PREEMPT_RT enabled, calling task_work_add() in
task_tick_mm_cid() may cause the following splat.
[ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe
[ 63.696416] preempt_count: 10001, expected: 0
[ 63.696416] RCU nest depth: 1, expected: 1
This problem is caused by the following call trace.
sched_tick() [ acquire rq->__lock ]
-> task_tick_mm_cid()
-> task_work_add()
-> __kasan_record_aux_stack()
-> kasan_save_stack()
-> stack_depot_save_flags()
-> alloc_pages_mpol_noprof()
-> __alloc_pages_noprof()
-> get_page_from_freelist()
-> rmqueue()
-> rmqueue_pcplist()
-> __rmqueue_pcplist()
-> rmqueue_bulk()
-> rt_spin_lock()
The rq lock is a raw_spinlock_t. We can't sleep while holding
it. IOW, we can't call alloc_pages() in stack_depot_save_flags().
The task_tick_mm_cid() function with its task_work_add() call was
introduced by commit 223baf9d17f2 ("sched: Fix performance regression
introduced by mm_cid") in v6.4 kernel.
Fortunately, there is a kasan_record_aux_stack_noalloc() variant that
calls stack_depot_save_flags() while not allowing it to allocate
new pages. To allow task_tick_mm_cid() to use task_work without
page allocation, a new TWAF_NO_ALLOC flag is added to enable calling
kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack()
if set. The task_tick_mm_cid() function is modified to add this new flag.
The possible downside is the missing stack trace in a KASAN report due
to new page allocation required when task_work_add_noallloc() is called
which should be rare. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix shift-out-of-bounds bug
Fix a shift-out-of-bounds bug reported by UBSAN when running
VM with MTE enabled host kernel.
UBSAN: shift-out-of-bounds in arch/arm64/kvm/sys_regs.c:1988:14
shift exponent 33 is too large for 32-bit type 'int'
CPU: 26 UID: 0 PID: 7629 Comm: qemu-kvm Not tainted 6.12.0-rc2 #34
Hardware name: IEI NF5280R7/Mitchell MB, BIOS 00.00. 2024-10-12 09:28:54 10/14/2024
Call trace:
dump_backtrace+0xa0/0x128
show_stack+0x20/0x38
dump_stack_lvl+0x74/0x90
dump_stack+0x18/0x28
__ubsan_handle_shift_out_of_bounds+0xf8/0x1e0
reset_clidr+0x10c/0x1c8
kvm_reset_sys_regs+0x50/0x1c8
kvm_reset_vcpu+0xec/0x2b0
__kvm_vcpu_set_target+0x84/0x158
kvm_vcpu_set_target+0x138/0x168
kvm_arch_vcpu_ioctl_vcpu_init+0x40/0x2b0
kvm_arch_vcpu_ioctl+0x28c/0x4b8
kvm_vcpu_ioctl+0x4bc/0x7a8
__arm64_sys_ioctl+0xb4/0x100
invoke_syscall+0x70/0x100
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x158
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x194/0x198 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Unregister notifier on eswitch init failure
It otherwise remains registered and a subsequent attempt at eswitch
enabling might trigger warnings of the sort:
[ 682.589148] ------------[ cut here ]------------
[ 682.590204] notifier callback eswitch_vport_event [mlx5_core] already registered
[ 682.590256] WARNING: CPU: 13 PID: 2660 at kernel/notifier.c:31 notifier_chain_register+0x3e/0x90
[...snipped]
[ 682.610052] Call Trace:
[ 682.610369] <TASK>
[ 682.610663] ? __warn+0x7c/0x110
[ 682.611050] ? notifier_chain_register+0x3e/0x90
[ 682.611556] ? report_bug+0x148/0x170
[ 682.611977] ? handle_bug+0x36/0x70
[ 682.612384] ? exc_invalid_op+0x13/0x60
[ 682.612817] ? asm_exc_invalid_op+0x16/0x20
[ 682.613284] ? notifier_chain_register+0x3e/0x90
[ 682.613789] atomic_notifier_chain_register+0x25/0x40
[ 682.614322] mlx5_eswitch_enable_locked+0x1d4/0x3b0 [mlx5_core]
[ 682.614965] mlx5_eswitch_enable+0xc9/0x100 [mlx5_core]
[ 682.615551] mlx5_device_enable_sriov+0x25/0x340 [mlx5_core]
[ 682.616170] mlx5_core_sriov_configure+0x50/0x170 [mlx5_core]
[ 682.616789] sriov_numvfs_store+0xb0/0x1b0
[ 682.617248] kernfs_fop_write_iter+0x117/0x1a0
[ 682.617734] vfs_write+0x231/0x3f0
[ 682.618138] ksys_write+0x63/0xe0
[ 682.618536] do_syscall_64+0x4c/0x100
[ 682.618958] entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix race condition between reset and nvme_dev_disable()
nvme_dev_disable() modifies the dev->online_queues field, therefore
nvme_pci_update_nr_queues() should avoid racing against it, otherwise
we could end up passing invalid values to blk_mq_update_nr_hw_queues().
WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347
pci_irq_get_affinity+0x187/0x210
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
RIP: 0010:pci_irq_get_affinity+0x187/0x210
Call Trace:
<TASK>
? blk_mq_pci_map_queues+0x87/0x3c0
? pci_irq_get_affinity+0x187/0x210
blk_mq_pci_map_queues+0x87/0x3c0
nvme_pci_map_queues+0x189/0x460 [nvme]
blk_mq_update_nr_hw_queues+0x2a/0x40
nvme_reset_work+0x1be/0x2a0 [nvme]
Fix the bug by locking the shutdown_lock mutex before using
dev->online_queues. Give up if nvme_dev_disable() is running or if
it has been executed already. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Don't crash in stack_top() for tasks without vDSO
Not all tasks have a vDSO mapped, for example kthreads never do. If such
a task ever ends up calling stack_top(), it will derefence the NULL vdso
pointer and crash.
This can for example happen when using kunit:
[<9000000000203874>] stack_top+0x58/0xa8
[<90000000002956cc>] arch_pick_mmap_layout+0x164/0x220
[<90000000003c284c>] kunit_vm_mmap_init+0x108/0x12c
[<90000000003c1fbc>] __kunit_add_resource+0x38/0x8c
[<90000000003c2704>] kunit_vm_mmap+0x88/0xc8
[<9000000000410b14>] usercopy_test_init+0xbc/0x25c
[<90000000003c1db4>] kunit_try_run_case+0x5c/0x184
[<90000000003c3d54>] kunit_generic_run_threadfn_adapter+0x24/0x48
[<900000000022e4bc>] kthread+0xc8/0xd4
[<9000000000200ce8>] ret_from_kernel_thread+0xc/0xa4 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/probes: Fix MAX_TRACE_ARGS limit handling
When creating a trace_probe we would set nr_args prior to truncating the
arguments to MAX_TRACE_ARGS. However, we would only initialize arguments
up to the limit.
This caused invalid memory access when attempting to set up probes with
more than 128 fetchargs.
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 UID: 0 PID: 1769 Comm: cat Not tainted 6.11.0-rc7+ #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
RIP: 0010:__set_print_fmt+0x134/0x330
Resolve the issue by applying the MAX_TRACE_ARGS limit earlier. Return
an error when there are too many arguments instead of silently
truncating. |
| In the Linux kernel, the following vulnerability has been resolved:
net: pse-pd: Fix out of bound for loop
Adjust the loop limit to prevent out-of-bounds access when iterating over
PI structures. The loop should not reach the index pcdev->nr_lines since
we allocate exactly pcdev->nr_lines number of PI structures. This fix
ensures proper bounds are maintained during iterations. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: fix global oob in wwan_rtnl_policy
The variable wwan_rtnl_link_ops assign a *bigger* maxtype which leads to
a global out-of-bounds read when parsing the netlink attributes. Exactly
same bug cause as the oob fixed in commit b33fb5b801c6 ("net: qualcomm:
rmnet: fix global oob in rmnet_policy").
==================================================================
BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:388 [inline]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603
Read of size 1 at addr ffffffff8b09cb60 by task syz.1.66276/323862
CPU: 0 PID: 323862 Comm: syz.1.66276 Not tainted 6.1.70 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x14f/0x750 mm/kasan/report.c:395
kasan_report+0x139/0x170 mm/kasan/report.c:495
validate_nla lib/nlattr.c:388 [inline]
__nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603
__nla_parse+0x3c/0x50 lib/nlattr.c:700
nla_parse_nested_deprecated include/net/netlink.h:1269 [inline]
__rtnl_newlink net/core/rtnetlink.c:3514 [inline]
rtnl_newlink+0x7bc/0x1fd0 net/core/rtnetlink.c:3623
rtnetlink_rcv_msg+0x794/0xef0 net/core/rtnetlink.c:6122
netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508
netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline]
netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352
netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874
sock_sendmsg_nosec net/socket.c:716 [inline]
__sock_sendmsg net/socket.c:728 [inline]
____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499
___sys_sendmsg+0x21c/0x290 net/socket.c:2553
__sys_sendmsg net/socket.c:2582 [inline]
__do_sys_sendmsg net/socket.c:2591 [inline]
__se_sys_sendmsg+0x19e/0x270 net/socket.c:2589
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f67b19a24ad
RSP: 002b:00007f67b17febb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f67b1b45f80 RCX: 00007f67b19a24ad
RDX: 0000000000000000 RSI: 0000000020005e40 RDI: 0000000000000004
RBP: 00007f67b1a1e01d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffd2513764f R14: 00007ffd251376e0 R15: 00007f67b17fed40
</TASK>
The buggy address belongs to the variable:
wwan_rtnl_policy+0x20/0x40
The buggy address belongs to the physical page:
page:ffffea00002c2700 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xb09c
flags: 0xfff00000001000(reserved|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000001000 ffffea00002c2708 ffffea00002c2708 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner info is not present (never set?)
Memory state around the buggy address:
ffffffff8b09ca00: 05 f9 f9 f9 05 f9 f9 f9 00 01 f9 f9 00 01 f9 f9
ffffffff8b09ca80: 00 00 00 05 f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9
>ffffffff8b09cb00: 00 00 00 00 05 f9 f9 f9 00 00 00 00 f9 f9 f9 f9
^
ffffffff8b09cb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
According to the comment of `nla_parse_nested_deprecated`, use correct size
`IFLA_WWAN_MAX` here to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Add the missing BPF_LINK_TYPE invocation for sockmap
There is an out-of-bounds read in bpf_link_show_fdinfo() for the sockmap
link fd. Fix it by adding the missing BPF_LINK_TYPE invocation for
sockmap link
Also add comments for bpf_link_type to prevent missing updates in the
future. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Hold rescan lock while adding devices during host probe
Since adding the PCI power control code, we may end up with a race between
the pwrctl platform device rescanning the bus and host controller probe
functions. The latter need to take the rescan lock when adding devices or
we may end up in an undefined state having two incompletely added devices
and hit the following crash when trying to remove the device over sysfs:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Call trace:
__pi_strlen+0x14/0x150
kernfs_find_ns+0x80/0x13c
kernfs_remove_by_name_ns+0x54/0xf0
sysfs_remove_bin_file+0x24/0x34
pci_remove_resource_files+0x3c/0x84
pci_remove_sysfs_dev_files+0x28/0x38
pci_stop_bus_device+0x8c/0xd8
pci_stop_bus_device+0x40/0xd8
pci_stop_and_remove_bus_device_locked+0x28/0x48
remove_store+0x70/0xb0
dev_attr_store+0x20/0x38
sysfs_kf_write+0x58/0x78
kernfs_fop_write_iter+0xe8/0x184
vfs_write+0x2dc/0x308
ksys_write+0x7c/0xec |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix warning when destroy 'cifs_io_request_pool'
There's a issue as follows:
WARNING: CPU: 1 PID: 27826 at mm/slub.c:4698 free_large_kmalloc+0xac/0xe0
RIP: 0010:free_large_kmalloc+0xac/0xe0
Call Trace:
<TASK>
? __warn+0xea/0x330
mempool_destroy+0x13f/0x1d0
init_cifs+0xa50/0xff0 [cifs]
do_one_initcall+0xdc/0x550
do_init_module+0x22d/0x6b0
load_module+0x4e96/0x5ff0
init_module_from_file+0xcd/0x130
idempotent_init_module+0x330/0x620
__x64_sys_finit_module+0xb3/0x110
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Obviously, 'cifs_io_request_pool' is not created by mempool_create().
So just use mempool_exit() to revert 'cifs_io_request_pool'. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reject ro->rw reconfiguration if there are hard ro requirements
[BUG]
Syzbot reports the following crash:
BTRFS info (device loop0 state MCS): disabling free space tree
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1)
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2)
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:backup_super_roots fs/btrfs/disk-io.c:1691 [inline]
RIP: 0010:write_all_supers+0x97a/0x40f0 fs/btrfs/disk-io.c:4041
Call Trace:
<TASK>
btrfs_commit_transaction+0x1eae/0x3740 fs/btrfs/transaction.c:2530
btrfs_delete_free_space_tree+0x383/0x730 fs/btrfs/free-space-tree.c:1312
btrfs_start_pre_rw_mount+0xf28/0x1300 fs/btrfs/disk-io.c:3012
btrfs_remount_rw fs/btrfs/super.c:1309 [inline]
btrfs_reconfigure+0xae6/0x2d40 fs/btrfs/super.c:1534
btrfs_reconfigure_for_mount fs/btrfs/super.c:2020 [inline]
btrfs_get_tree_subvol fs/btrfs/super.c:2079 [inline]
btrfs_get_tree+0x918/0x1920 fs/btrfs/super.c:2115
vfs_get_tree+0x90/0x2b0 fs/super.c:1800
do_new_mount+0x2be/0xb40 fs/namespace.c:3472
do_mount fs/namespace.c:3812 [inline]
__do_sys_mount fs/namespace.c:4020 [inline]
__se_sys_mount+0x2d6/0x3c0 fs/namespace.c:3997
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[CAUSE]
To support mounting different subvolume with different RO/RW flags for
the new mount APIs, btrfs introduced two workaround to support this feature:
- Skip mount option/feature checks if we are mounting a different
subvolume
- Reconfigure the fs to RW if the initial mount is RO
Combining these two, we can have the following sequence:
- Mount the fs ro,rescue=all,clear_cache,space_cache=v1
rescue=all will mark the fs as hard read-only, so no v2 cache clearing
will happen.
- Mount a subvolume rw of the same fs.
We go into btrfs_get_tree_subvol(), but fc_mount() returns EBUSY
because our new fc is RW, different from the original fs.
Now we enter btrfs_reconfigure_for_mount(), which switches the RO flag
first so that we can grab the existing fs_info.
Then we reconfigure the fs to RW.
- During reconfiguration, option/features check is skipped
This means we will restart the v2 cache clearing, and convert back to
v1 cache.
This will trigger fs writes, and since the original fs has "rescue=all"
option, it skips the csum tree read.
And eventually causing NULL pointer dereference in super block
writeback.
[FIX]
For reconfiguration caused by different subvolume RO/RW flags, ensure we
always run btrfs_check_options() to ensure we have proper hard RO
requirements met.
In fact the function btrfs_check_options() doesn't really do many
complex checks, but hard RO requirement and some feature dependency
checks, thus there is no special reason not to do the check for mount
reconfiguration. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: Guard against bad data for ATIF ACPI method
If a BIOS provides bad data in response to an ATIF method call
this causes a NULL pointer dereference in the caller.
```
? show_regs (arch/x86/kernel/dumpstack.c:478 (discriminator 1))
? __die (arch/x86/kernel/dumpstack.c:423 arch/x86/kernel/dumpstack.c:434)
? page_fault_oops (arch/x86/mm/fault.c:544 (discriminator 2) arch/x86/mm/fault.c:705 (discriminator 2))
? do_user_addr_fault (arch/x86/mm/fault.c:440 (discriminator 1) arch/x86/mm/fault.c:1232 (discriminator 1))
? acpi_ut_update_object_reference (drivers/acpi/acpica/utdelete.c:642)
? exc_page_fault (arch/x86/mm/fault.c:1542)
? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623)
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:387 (discriminator 2)) amdgpu
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:386 (discriminator 1)) amdgpu
```
It has been encountered on at least one system, so guard for it.
(cherry picked from commit c9b7c809b89f24e9372a4e7f02d64c950b07fdee) |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix kernel bug due to missing clearing of buffer delay flag
Syzbot reported that after nilfs2 reads a corrupted file system image
and degrades to read-only, the BUG_ON check for the buffer delay flag
in submit_bh_wbc() may fail, causing a kernel bug.
This is because the buffer delay flag is not cleared when clearing the
buffer state flags to discard a page/folio or a buffer head. So, fix
this.
This became necessary when the use of nilfs2's own page clear routine
was expanded. This state inconsistency does not occur if the buffer
is written normally by log writing. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory
Ignore nCR3[4:0] when loading PDPTEs from memory for nested SVM, as bits
4:0 of CR3 are ignored when PAE paging is used, and thus VMRUN doesn't
enforce 32-byte alignment of nCR3.
In the absolute worst case scenario, failure to ignore bits 4:0 can result
in an out-of-bounds read, e.g. if the target page is at the end of a
memslot, and the VMM isn't using guard pages.
Per the APM:
The CR3 register points to the base address of the page-directory-pointer
table. The page-directory-pointer table is aligned on a 32-byte boundary,
with the low 5 address bits 4:0 assumed to be 0.
And the SDM's much more explicit:
4:0 Ignored
Note, KVM gets this right when loading PDPTRs, it's only the nSVM flow
that is broken. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: core: fix invalid port index for parent device
In a commit 24b7f8e5cd65 ("firewire: core: use helper functions for self
ID sequence"), the enumeration over self ID sequence was refactored with
some helper functions with KUnit tests. These helper functions are
guaranteed to work expectedly by the KUnit tests, however their application
includes a mistake to assign invalid value to the index of port connected
to parent device.
This bug affects the case that any extra node devices which has three or
more ports are connected to 1394 OHCI controller. In the case, the path
to update the tree cache could hits WARN_ON(), and gets general protection
fault due to the access to invalid address computed by the invalid value.
This commit fixes the bug to assign correct port index. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/lam: Disable ADDRESS_MASKING in most cases
Linear Address Masking (LAM) has a weakness related to transient
execution as described in the SLAM paper[1]. Unless Linear Address
Space Separation (LASS) is enabled this weakness may be exploitable.
Until kernel adds support for LASS[2], only allow LAM for COMPILE_TEST,
or when speculation mitigations have been disabled at compile time,
otherwise keep LAM disabled.
There are no processors in market that support LAM yet, so currently
nobody is affected by this issue.
[1] SLAM: https://download.vusec.net/papers/slam_sp24.pdf
[2] LASS: https://lore.kernel.org/lkml/20230609183632.48706-1-alexander.shishkin@linux.intel.com/
[ dhansen: update SPECULATION_MITIGATIONS -> CPU_MITIGATIONS ] |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Enable IRQ if do_ale() triggered in irq-enabled context
Unaligned access exception can be triggered in irq-enabled context such
as user mode, in this case do_ale() may call get_user() which may cause
sleep. Then we will get:
BUG: sleeping function called from invalid context at arch/loongarch/kernel/access-helper.h:7
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 129, name: modprobe
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
CPU: 0 UID: 0 PID: 129 Comm: modprobe Tainted: G W 6.12.0-rc1+ #1723
Tainted: [W]=WARN
Stack : 9000000105e0bd48 0000000000000000 9000000003803944 9000000105e08000
9000000105e0bc70 9000000105e0bc78 0000000000000000 0000000000000000
9000000105e0bc78 0000000000000001 9000000185e0ba07 9000000105e0b890
ffffffffffffffff 9000000105e0bc78 73924b81763be05b 9000000100194500
000000000000020c 000000000000000a 0000000000000000 0000000000000003
00000000000023f0 00000000000e1401 00000000072f8000 0000007ffbb0e260
0000000000000000 0000000000000000 9000000005437650 90000000055d5000
0000000000000000 0000000000000003 0000007ffbb0e1f0 0000000000000000
0000005567b00490 0000000000000000 9000000003803964 0000007ffbb0dfec
00000000000000b0 0000000000000007 0000000000000003 0000000000071c1d
...
Call Trace:
[<9000000003803964>] show_stack+0x64/0x1a0
[<9000000004c57464>] dump_stack_lvl+0x74/0xb0
[<9000000003861ab4>] __might_resched+0x154/0x1a0
[<900000000380c96c>] emulate_load_store_insn+0x6c/0xf60
[<9000000004c58118>] do_ale+0x78/0x180
[<9000000003801bc8>] handle_ale+0x128/0x1e0
So enable IRQ if unaligned access exception is triggered in irq-enabled
context to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: fix one more kernel-infoleak in algo dumping
During fuzz testing, the following issue was discovered:
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x598/0x2a30
_copy_to_iter+0x598/0x2a30
__skb_datagram_iter+0x168/0x1060
skb_copy_datagram_iter+0x5b/0x220
netlink_recvmsg+0x362/0x1700
sock_recvmsg+0x2dc/0x390
__sys_recvfrom+0x381/0x6d0
__x64_sys_recvfrom+0x130/0x200
x64_sys_call+0x32c8/0x3cc0
do_syscall_64+0xd8/0x1c0
entry_SYSCALL_64_after_hwframe+0x79/0x81
Uninit was stored to memory at:
copy_to_user_state_extra+0xcc1/0x1e00
dump_one_state+0x28c/0x5f0
xfrm_state_walk+0x548/0x11e0
xfrm_dump_sa+0x1e0/0x840
netlink_dump+0x943/0x1c40
__netlink_dump_start+0x746/0xdb0
xfrm_user_rcv_msg+0x429/0xc00
netlink_rcv_skb+0x613/0x780
xfrm_netlink_rcv+0x77/0xc0
netlink_unicast+0xe90/0x1280
netlink_sendmsg+0x126d/0x1490
__sock_sendmsg+0x332/0x3d0
____sys_sendmsg+0x863/0xc30
___sys_sendmsg+0x285/0x3e0
__x64_sys_sendmsg+0x2d6/0x560
x64_sys_call+0x1316/0x3cc0
do_syscall_64+0xd8/0x1c0
entry_SYSCALL_64_after_hwframe+0x79/0x81
Uninit was created at:
__kmalloc+0x571/0xd30
attach_auth+0x106/0x3e0
xfrm_add_sa+0x2aa0/0x4230
xfrm_user_rcv_msg+0x832/0xc00
netlink_rcv_skb+0x613/0x780
xfrm_netlink_rcv+0x77/0xc0
netlink_unicast+0xe90/0x1280
netlink_sendmsg+0x126d/0x1490
__sock_sendmsg+0x332/0x3d0
____sys_sendmsg+0x863/0xc30
___sys_sendmsg+0x285/0x3e0
__x64_sys_sendmsg+0x2d6/0x560
x64_sys_call+0x1316/0x3cc0
do_syscall_64+0xd8/0x1c0
entry_SYSCALL_64_after_hwframe+0x79/0x81
Bytes 328-379 of 732 are uninitialized
Memory access of size 732 starts at ffff88800e18e000
Data copied to user address 00007ff30f48aff0
CPU: 2 PID: 18167 Comm: syz-executor.0 Not tainted 6.8.11 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Fixes copying of xfrm algorithms where some random
data of the structure fields can end up in userspace.
Padding in structures may be filled with random (possibly sensitve)
data and should never be given directly to user-space.
A similar issue was resolved in the commit
8222d5910dae ("xfrm: Zero padding when dumping algos and encap")
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
