| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell Alienware Command Center (AWCC), versions prior to 6.13.8.0, contain an Execution with Unnecessary Privileges vulnerability in the AWCC. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Fix wildcard bind conflict check when using hash2
When binding a udp_sock to a local address and port, UDP uses
two hashes (udptable->hash and udptable->hash2) for collision
detection. The current code switches to "hash2" when
hslot->count > 10.
"hash2" is keyed by local address and local port.
"hash" is keyed by local port only.
The issue can be shown in the following bind sequence (pseudo code):
bind(fd1, "[fd00::1]:8888")
bind(fd2, "[fd00::2]:8888")
bind(fd3, "[fd00::3]:8888")
bind(fd4, "[fd00::4]:8888")
bind(fd5, "[fd00::5]:8888")
bind(fd6, "[fd00::6]:8888")
bind(fd7, "[fd00::7]:8888")
bind(fd8, "[fd00::8]:8888")
bind(fd9, "[fd00::9]:8888")
bind(fd10, "[fd00::10]:8888")
/* Correctly return -EADDRINUSE because "hash" is used
* instead of "hash2". udp_lib_lport_inuse() detects the
* conflict.
*/
bind(fail_fd, "[::]:8888")
/* After one more socket is bound to "[fd00::11]:8888",
* hslot->count exceeds 10 and "hash2" is used instead.
*/
bind(fd11, "[fd00::11]:8888")
bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */
The same issue applies to the IPv4 wildcard address "0.0.0.0"
and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For
example, if there are existing sockets bound to
"192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or
"[::ffff:0.0.0.0]:8888" can also miss the conflict when
hslot->count > 10.
TCP inet_csk_get_port() already has the correct check in
inet_use_bhash2_on_bind(). Rename it to
inet_use_hash2_on_bind() and move it to inet_hashtables.h
so udp.c can reuse it in this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: check error for register_netdev() on init
Current init logic ignores the error code from register_netdev(),
which will cause WARN_ON() on attempt to unregister it, if there was one,
and there is no info for the user that the creation of the netdev failed.
WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10
...
[ 3707.563641] unregister_netdev+0x1c/0x30
[ 3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf]
[ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf]
[ 3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf]
[ 3707.563739] idpf_remove+0xbf/0x780 [idpf]
[ 3707.563769] pci_device_remove+0xab/0x1e0
[ 3707.563786] device_release_driver_internal+0x371/0x530
[ 3707.563803] driver_detach+0xbf/0x180
[ 3707.563816] bus_remove_driver+0x11b/0x2a0
[ 3707.563829] pci_unregister_driver+0x2a/0x250
Introduce an error check and log the vport number and error code.
On removal make sure to check VPORT_REG_NETDEV flag prior to calling
unregister and free on the netdev.
Add local variables for idx, vport_config and netdev for readability. |
| The Prime Listing Manager WordPress plugin through 1.1 allows an attacker to gain administrative access without having any kind of account on the targeted site and perform unauthorized actions due to a hardcoded secret. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool()
page_pool_create() can return an ERR_PTR on failure. The return value
is used unconditionally in the loop that follows, passing the error
pointer through xdp_rxq_info_reg_mem_model() into page_pool_use_xdp_mem(),
which dereferences it, causing a kernel oops.
Add an IS_ERR check after page_pool_create() to return early on failure. |
| nimiq-primitives contains primitives (e.g., block, account, transaction) to be used in Nimiq's Rust implementation. Prior to version 1.3.0, an untrusted p2p peer can cause a node to panic by announcing an election macro block whose `validators` set contains an invalid compressed BLS voting key. Hashing an election macro header hashes `validators` and reaches `Validators::voting_keys()`, which calls `validator.voting_key.uncompress().unwrap()` and panics on invalid bytes. The patch for this vulnerability is included as part of v1.3.0. No known workarounds are available. |
| In udev in systemd before 260, local root execution can occur via malicious hardware devices and unsanitized kernel output. |
| Local privilege escalation in Genetec Sipelia Plugin. An authenticated low-privileged Windows user could exploit this vulnerability to gain elevated privileges on the affected system. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data
set_new_password() hex dumps the entire buffer, which contains plaintext
password data, including current and new passwords. Remove the hex dump
to avoid leaking credentials. |
| A vulnerability has been found in wandb OpenUI up to 0.0.0.0/1.0. This impacts an unknown function of the file backend/openui/config.py. The manipulation of the argument LITELLM_MASTER_KEY leads to hard-coded credentials. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw was found in the Submariner project. Due to unnecessary role-based access control permissions, a privileged attacker can run a malicious container on a node that may allow them to steal service account tokens and further compromise other nodes and potentially the entire cluster. |
| Vulnerability in Oracle Java SE (component: Libraries). The supported version that is affected is Oracle Java SE: 25.0.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). |
| HP Operations Manager has a default password of OvW*busr1 for the ovwebusr account, which allows remote attackers to execute arbitrary code via a session that uses the manager role to conduct unrestricted file upload attacks against the /manager servlet in the Tomcat servlet container. NOTE: this might overlap CVE-2009-3099 and CVE-2009-3843. |
| Adobe ColdFusion 8 and MX 7 allows remote attackers to hijack sessions via unspecified vectors that trigger establishment of a session to a ColdFusion application in which the (1) CFID or (2) CFTOKEN cookies have empty values, possibly due to a session fixation vulnerability. |
| The Sametime server in IBM Lotus Instant Messaging and Web Conferencing 6.5.1 generates error messages for a failed logon attempt with different time delays depending on whether the user account exists, which allows remote attackers to enumerate valid usernames. |
| autoload/netrw.vim (aka the Netrw Plugin) 109, 131, and other versions before 133k for Vim 7.1.266, other 7.1 versions, and 7.2 stores credentials for an FTP session, and sends those credentials when attempting to establish subsequent FTP sessions to servers on different hosts, which allows remote FTP servers to obtain sensitive information in opportunistic circumstances by logging usernames and passwords. NOTE: the upstream vendor disputes a vector involving different ports on the same host, stating "I'm assuming that they're using the same id and password on that unchanged hostname, deliberately." |
| The (1) ecryptfs-setup-private, (2) ecryptfs-setup-confidential, and (3) ecryptfs-setup-pam-wrapped.sh scripts in ecryptfs-utils 45 through 61 in eCryptfs place cleartext passwords on command lines, which allows local users to obtain sensitive information by listing the process. |
| Opera before 9.52 does not check the CRL override upon encountering a certificate that lacks a CRL, which has unknown impact and attack vectors. NOTE: it is not clear whether this is a vulnerability, but the vendor included it in a security section of the advisory. |
| Citrix EdgeSight 4.2 and 4.5 for Presentation Server, EdgeSight 4.2 and 4.5 for Endpoints, and EdgeSight for NetScaler 1.0 and 1.1 do not properly store database credentials in configuration files, which allows local users to obtain sensitive information. |
| wp-login.php in WordPress 2.8.3 and earlier allows remote attackers to force a password reset for the first user in the database, possibly the administrator, via a key[] array variable in a resetpass (aka rp) action, which bypasses a check that assumes that $key is not an array. |
