| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command
When control vq receives a VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command
request from the driver, presently there is no validation against the
number of queue pairs to configure, or even if multiqueue had been
negotiated or not is unverified. This may lead to kernel panic due to
uninitialized resource for the queues were there any bogus request
sent down by untrusted driver. Tie up the loose ends there. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser
The Information Element (IE) parser rtw_get_ie() trusted the length
byte of each IE without validating that the IE body (len bytes after
the 2-byte header) fits inside the remaining frame buffer. A malformed
frame can advertise an IE length larger than the available data, causing
the parser to increment its pointer beyond the buffer end. This results
in out-of-bounds reads or, depending on the pattern, an infinite loop.
Fix by validating that (offset + 2 + len) does not exceed the limit
before accepting the IE or advancing to the next element.
This prevents OOB reads and ensures the parser terminates safely on
malformed frames. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix admin request_queue lifetime
The namespaces can access the controller's admin request_queue, and
stale references on the namespaces may exist after tearing down the
controller. Ensure the admin request_queue is active by moving the
controller's 'put' to after all controller references have been released
to ensure no one is can access the request_queue. This fixes a reported
use-after-free bug:
BUG: KASAN: slab-use-after-free in blk_queue_enter+0x41c/0x4a0
Read of size 8 at addr ffff88c0a53819f8 by task nvme/3287
CPU: 67 UID: 0 PID: 3287 Comm: nvme Tainted: G E 6.13.2-ga1582f1a031e #15
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Jabil /EGS 2S MB1, BIOS 1.00 06/18/2025
Call Trace:
<TASK>
dump_stack_lvl+0x4f/0x60
print_report+0xc4/0x620
? _raw_spin_lock_irqsave+0x70/0xb0
? _raw_read_unlock_irqrestore+0x30/0x30
? blk_queue_enter+0x41c/0x4a0
kasan_report+0xab/0xe0
? blk_queue_enter+0x41c/0x4a0
blk_queue_enter+0x41c/0x4a0
? __irq_work_queue_local+0x75/0x1d0
? blk_queue_start_drain+0x70/0x70
? irq_work_queue+0x18/0x20
? vprintk_emit.part.0+0x1cc/0x350
? wake_up_klogd_work_func+0x60/0x60
blk_mq_alloc_request+0x2b7/0x6b0
? __blk_mq_alloc_requests+0x1060/0x1060
? __switch_to+0x5b7/0x1060
nvme_submit_user_cmd+0xa9/0x330
nvme_user_cmd.isra.0+0x240/0x3f0
? force_sigsegv+0xe0/0xe0
? nvme_user_cmd64+0x400/0x400
? vfs_fileattr_set+0x9b0/0x9b0
? cgroup_update_frozen_flag+0x24/0x1c0
? cgroup_leave_frozen+0x204/0x330
? nvme_ioctl+0x7c/0x2c0
blkdev_ioctl+0x1a8/0x4d0
? blkdev_common_ioctl+0x1930/0x1930
? fdget+0x54/0x380
__x64_sys_ioctl+0x129/0x190
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f765f703b0b
Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d dd 52 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe2cefe808 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffe2cefe860 RCX: 00007f765f703b0b
RDX: 00007ffe2cefe860 RSI: 00000000c0484e41 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000000
R10: 00007f765f611d50 R11: 0000000000000202 R12: 0000000000000003
R13: 00000000c0484e41 R14: 0000000000000001 R15: 00007ffe2cefea60
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents
pefile_digest_pe_contents() computes the trailing-data hash length as
pelen - (hashed_bytes + certs_size). A crafted PE can make the addition
exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB.
This is passed to crypto_shash_update() which reads out of bounds and
panics on unmapped vmalloc guard pages.
BUG: unable to handle page fault for address: ffffc900038d8000
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152)
Call Trace:
<TASK>
__sha256_update (lib/crypto/sha256.c:208)
crypto_sha256_update (crypto/sha256.c:142)
verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436)
kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151)
__do_sys_kexec_file_load (kernel/kexec_file.c:406)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Kernel panic - not syncing: Fatal exception
Validate that the addition does not overflow and the result does not
exceed pelen before the subtraction. Return -ELIBBAD on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits
when the guest's virtual TPR falls under the specified threshold,
allowing KVM to inject previously masked interrupts.
KVM handles these VM exits in handle_tpr_below_threshold().
Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits")
optimized this function by calling apic_update_ppr() instead of raising
KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is
a pending, deliverable interrupt.
However, if there are no new interrupts pending, apic_update_ppr() does
not issue the request. Thus, kvm_lapic_update_cr8_intercept() and
vmx_update_cr8_intercept() are not called before VM entry, which results
in a high, stale TPR_THRESHOLD. This is problematic due to the following
sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM:
The following check is performed if the “use TPR shadow” VM-execution
control is 1 and the “virtualize APIC accesses” and “virtual-interrupt
delivery” VM-execution controls are both 0: the value of bits 3:0 of
the TPR threshold VM-execution control field should not be greater
than the value of bits 7:4 of VTPR.
This error condition is typically not observed when KVM runs on a bare
metal system because modern processors support APICv, which enables
virtual-interrupt delivery, and which KVM uses when possible. This
causes the processor to no longer generate TPR-below-threshold exits
and to no longer check TPR_THRESHOLD on entry. However, when running
on older platforms, or under nested virtualization on a hypervisor that
does not support virtual-interrupt delivery and enforces this check
(like Hyper-V) this can cause a VM entry failure with hardware error
0x7, as seen in [1].
Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does not
find a deliverable interrupt (and thus does not raise KVM_REQ_EVENT).
Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up in
apic_update_ppr(), as they now become redundant. This ensures that any
path that updates the guest's PPR also figures out if KVM needs to wait
for a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/hyperv: validate resolution_count and fix WIN8 fallback
A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past
the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the
parse loop. Bound resolution_count against the array size, folded
into the existing zero-check.
When the WIN10 resolution probe fails, the caller in
hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated,
which sets mode_config.max_width / max_height to 0 and makes
drm_internal_framebuffer_create() reject every userspace framebuffer
with -EINVAL. The pre-WIN10 branch had the same gap for
preferred_width / preferred_height. Use a single post-probe fallback
guarded by screen_width_max == 0 so both paths converge on the WIN8
defaults. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: hyper-v: Bound the bank index when querying sparse banks
When checking if a VP ID is included in a sparse bank set, explicitly check
that the ID can actually be contained in a sparse bank (the TLFS allows for
a maximum of 64 banks of 64 vCPUs each). When handling a paravirtual TLB
flush for L2, the VP ID is copied verbatim from the enlightened VMCS,
without any bounds check, i.e. isn't guaranteed to be under the limit of
4096.
Failure to check the bounds of the VP ID leads to an out-of-bounds read
when testing the sparse bank, and super strictly speaking could lead to KVM
performing an unnecessary TLB flush for an L2 vCPU.
==================================================================
BUG: KASAN: use-after-free in hv_is_vp_in_sparse_set+0x85/0x100 [kvm]
Read of size 8 at addr ffff88811ba5f598 by task hyperv_evmcs/2802
CPU: 12 UID: 1000 PID: 2802 Comm: hyperv_evmcs Not tainted 7.1.0-rc2 #7 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x51/0x60
print_report+0xcb/0x5d0
kasan_report+0xb4/0xe0
kasan_check_range+0x35/0x1b0
hv_is_vp_in_sparse_set+0x85/0x100 [kvm]
kvm_hv_flush_tlb+0xe9e/0x16c0 [kvm]
kvm_hv_hypercall+0xe6b/0x1e60 [kvm]
vmx_handle_exit+0x485/0x1b60 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0x22e3/0x5070 [kvm]
kvm_vcpu_ioctl+0x5d0/0x10c0 [kvm]
__x64_sys_ioctl+0x129/0x1a0
do_syscall_64+0xb9/0xcf0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f0e62d1a9bf
</TASK>
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffffffffffffffff pfn:0x11ba5f
flags: 0x4000000000000000(zone=1)
raw: 4000000000000000 0000000000000000 00000000ffffffff 0000000000000000
raw: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88811ba5f480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88811ba5f500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88811ba5f580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff88811ba5f600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88811ba5f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
Disabling lock debugging due to kernel taint
Opportunistically add a compile time assertion to ensure the maximum number
of sparse banks exactly matches the number of possible bits in the passed
in mask.
[sean: add KASAN splat, drop comment, add assert, massage changelog] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Fix sleep in atomic context in xhci_free_streams()
When a USB device with active stream endpoints is disconnected,
xhci_free_streams() is called from the hub_event workqueue to
free the stream resources. It calls xhci_free_stream_info()
while holding xhci->lock with irqs disabled.
xhci_free_stream_info() invokes xhci_free_stream_ctx(), which
calls dma_free_coherent() for large stream context arrays.
dma_free_coherent() can sleep (e.g. via vunmap), triggering
a BUG when called from atomic context.
Call trace:
dma_free_attrs+0x174/0x220
xhci_free_stream_info+0xd0/0x11c
xhci_free_streams+0x278/0x37c
usb_free_streams+0x98/0xc0
usb_unbind_interface+0x1b8/0x2f8
device_release_driver_internal+0x1d4/0x2cc
device_release_driver+0x18/0x28
bus_remove_device+0x160/0x1a4
device_del+0x1ec/0x350
usb_disable_device+0x98/0x214
usb_disconnect+0xf0/0x35c
hub_event+0xab4/0x19ec
process_one_work+0x278/0x63c
Fix this by saving the stream_info pointers and clearing the
ep references under the lock, then calling xhci_free_stream_info()
outside the lock where sleeping is allowed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: fix stale prevhdr pointer in br_ip6_fragment()
br_ip6_fragment() gets prevhdr, a pointer into the skb head, from
ip6_find_1stfragopt(), then calls skb_checksum_help(). For a cloned skb
skb_checksum_help() reallocates the head via pskb_expand_head(), leaving
prevhdr dangling. It is later dereferenced in ip6_frag_next(), causing a
use-after-free write.
Save prevhdr's offset before skb_checksum_help() and recompute it after,
like commit ef0efcd3bd3f ("ipv6: Fix dangling pointer when ipv6
fragment").
BUG: KASAN: slab-use-after-free in ip6_frag_next (net/ipv6/ip6_output.c:857)
Write of size 1 at addr ffff888013ff5016 by task exploit/141
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ip6_frag_next (net/ipv6/ip6_output.c:857)
br_ip6_fragment (net/ipv6/netfilter.c:212)
nf_ct_bridge_post (net/bridge/netfilter/nf_conntrack_bridge.c:407)
nf_hook_slow (net/netfilter/core.c:619)
br_forward_finish (net/bridge/br_forward.c:66)
__br_forward (net/bridge/br_forward.c:115)
maybe_deliver (net/bridge/br_forward.c:191)
br_flood (net/bridge/br_forward.c:245)
br_handle_frame_finish (net/bridge/br_input.c:229)
br_handle_frame (net/bridge/br_input.c:442)
...
packet_sendmsg (net/packet/af_packet.c:3114)
...
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject fragmented frames in devmap
Devmap broadcast redirects clone the packet for all but the last
destination.
For native XDP, that clone path copies only the linear xdp_frame data,
while fragmented frames keep skb_shared_info in tailroom outside the
linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but
without valid frag metadata, and the later free path can interpret
uninitialized tail data as skb_shared_info, leading to an out-of-bounds
access during frame return.
Reject fragmented native XDP frames in dev_map_enqueue_clone().
Add the same restriction to the generic XDP clone path in
dev_map_redirect_clone(). Generic XDP represents fragmented packets as
nonlinear skbs, and rejecting them here keeps clone-based broadcast
support aligned between native and generic XDP. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: altera: Fix resource leaks on probe failure
The chained IRQ handler is set during probe, but is only removed during the
driver remove(). If pci_host_probe() fails, the handler and INTx IRQ
domain remain set even though the devm-managed host bridge storage
containing struct altera_pcie will be released, leaving the handler with
a stale data pointer.
Interrupts are also enabled before pci_host_probe() is called. If probe
fails after that point, the controller interrupt source should be disabled
before the chained handler and INTx domain are removed.
So set the chained handler only after the INTx domain has been created.
Disable controller interrupts during IRQ teardown, and tear the IRQ setup
down if pci_host_probe() fails.
[mani: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: avoid kobject path lookup in DualSense match
The DualSense jack-detection input handler verifies that a matching input
device belongs to the same physical controller by building kobject path
strings for both the input device and the USB audio device, then comparing
the path prefix.
This was observed when a weak physical connection caused the controller
to rapidly disconnect and reconnect. During that repeated hotplug,
snd_dualsense_ih_match() can run while the controller's USB device is
being disconnected. kobject_get_path() walks ancestor kobjects and
dereferences their names; if the USB device kobject name is no longer
valid, this can fault in strlen():
RIP: 0010:strlen+0x10/0x30
Call Trace:
kobject_get_path+0x34/0x150
snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio]
input_register_device+0x566/0x6a0
ps_probe+0xb89/0x1590 [hid_playstation]
The same ownership check can be done without building kobject path
strings. The input device is parented below the HID device, USB interface
and USB device, so walking the input device parent chain and comparing
against the mixer USB device preserves the check without dereferencing
kobject names during disconnect. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate STALE_COOKIE cause length before reading staleness
When an ERROR chunk with a STALE_COOKIE cause is received in the
COOKIE_ECHOED state, sctp_sf_do_5_2_6_stale() reads the 4-byte Measure
of Staleness that follows the cause header:
err = (struct sctp_errhdr *)(chunk->skb->data);
stale = ntohl(*(__be32 *)((u8 *)err + sizeof(*err)));
err is the first cause in the chunk, not the STALE_COOKIE cause that
caused the dispatch, and nothing guarantees the staleness field is
present. sctp_walk_errors() only requires a cause to be as long as the
4-byte header, so for a STALE_COOKIE cause of length 4 the read runs
past the cause, and for a minimal ERROR chunk past skb->tail. The value
is echoed to the peer in the Cookie Preservative of the reply INIT,
leaking uninitialized memory.
sctp_sf_cookie_echoed_err() already walks to the STALE_COOKIE cause, so
check its length there and pass it to sctp_sf_do_5_2_6_stale(), which
reads that cause instead of the first one. A STALE_COOKIE cause too
short to hold the staleness field is discarded.
The read is reachable by any peer that can drive an association into
COOKIE_ECHOED, including an unprivileged process using a raw SCTP socket
in a user and network namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not free data reservation in fallback from inline due to -ENOSPC
If we fail to create an inline extent due to -ENOSPC, we will attempt to
go through the normal COW path, reserve an extent, create an ordered
extent, etc. However we were always freeing the reserved qgroup data,
which is wrong since we will use data. Fix this by freeing the reserved
qgroup data in __cow_file_range_inline() only if we are not doing the
fallback (ret is <= 0). |
| Use after free in Ozone in Google Chrome on Linux prior to 150.0.7871.128 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: validate reply message payload bounds against transfer length
nvmet_auth_reply() accesses the variable-length rval[] array using
attacker-controlled hl (hash length) and dhvlen (DH value length) fields
without verifying they fit within the allocated buffer of tl bytes.
A malicious NVMe-oF initiator can craft a DHCHAP_REPLY message with a
small transfer length but large hl/dhvlen values, causing out-of-bounds
heap reads when the target processes the DH public key (rval + 2*hl) or
performs the host response memcmp.
With DH authentication configured, the OOB pointer is passed directly to
sg_init_one() and read by crypto_kpp_compute_shared_secret(), reaching
up to 526 bytes past the buffer. This is exploitable pre-authentication.
Add bounds validation ensuring sizeof(*data) + 2*hl + dhvlen <= tl before
any access to the variable-length fields.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: fix out-of-bounds bit access on mt_io_flags
mt_io_flags is a single unsigned long, but mt_process_slot(),
mt_release_pending_palms() and mt_release_contacts() use it as a
per-slot bitmap indexed by the slot number. That slot number is only
bounded by td->maxcontacts, which is taken from the device's
ContactCountMaximum feature report and can be up to 255, not by
BITS_PER_LONG.
As a result, a multitouch device that advertises a large contact count
makes set_bit()/clear_bit() operate past the mt_io_flags word and
corrupt the adjacent members of struct mt_device. The sticky-fingers
release timer is the easiest way to reach this. mt_release_contacts()
runs
for (i = 0; i < mt->num_slots; i++)
clear_bit(i, &td->mt_io_flags);
with num_slots == maxcontacts. For maxcontacts around 250 the loop
clears the bits that overlap td->applications.next, zeroing that list
head, and the list_for_each_entry() that immediately follows then
dereferences NULL. The kernel panics from timer (softirq) context. On a
KASAN build this shows up as a general protection fault in
mt_release_contacts() with a null-ptr-deref at offset 0x58, which is
offsetof(struct mt_application, num_received).
The state is reachable from an untrusted USB or Bluetooth HID
multitouch device; no local privileges are required.
Store the per-slot active state in a separately allocated bitmap sized
for maxcontacts, the same pattern already used for pending_palm_slots,
and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two
"mt_io_flags & MT_IO_SLOTS_MASK" arming checks become
bitmap_empty(td->active_slots, td->maxcontacts).
Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the
same commit to leave the low byte for the slot bits; with the slot bits
gone it fits in bit 0 again, which also keeps it within the unsigned
long on 32-bit. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arc
vfio_mig_get_next_state() walks vfio_from_fsm_table[] one step at a time,
looping to skip optional states the device does not support until
*next_fsm is supported. A blocked transition is encoded as
VFIO_DEVICE_STATE_ERROR, which the trailing return reports as -EINVAL.
The skip loop does not account for the ERROR sentinel.
state_flags_table[ERROR] is ~0U and vfio_from_fsm_table[ERROR][*] is
ERROR, so once *next_fsm becomes ERROR the loop condition stays true and
*next_fsm never changes. The blocked arcs STOP_COPY -> PRE_COPY and
STOP_COPY -> PRE_COPY_P2P map to ERROR yet pass the support check on a
precopy-capable device, causing the loop to spin forever while holding
the driver state mutex. This can result in a soft lockup, and a panic
with softlockup_panic set.
Terminate the skip loop on the ERROR sentinel so a blocked transition
falls through to the existing return and reports -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: virtio: Validate control metadata from the device
virtio-snd control handling trusts the device-provided control type and
value count returned by the device.
That metadata is then used directly to index g_v2a_type_map[] in
virtsnd_kctl_info(), and to size loops and memcpy() operations in
virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size
virtio_snd_ctl_value and snd_ctl_elem_value arrays.
A buggy or malicious device can therefore trigger out-of-bounds access by
advertising an invalid control type or an oversized value count.
Validate control type and count once in virtsnd_kctl_parse_cfg(), before
querying enumerated items or exposing the control to ALSA. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap002: fix runtime PM leak on read error
gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the
lux value, but if gp2ap002_get_lux() fails, it returns directly. This
skips the pm_runtime_put_autosuspend() call at the "out" label,
permanently leaking a runtime PM reference and preventing the device
from autosuspending.
Replace the direct return with a "goto out" to ensure the reference
is properly dropped on the error path. |
