Search vulnerabilities

Use the Query Builder to create your own search query, or check out the documentation to learn the search syntax.

Results 12,177

CVE-2026-93827

virtio-fs: avoid double-free on failed queue setup

In the Linux kernel, the following vulnerability has been resolved: virtio-fs: avoid double-free on failed queue setup virtio_fs_setup_vqs() allocates fs->vqs and fs->mq_map before calling virtio_find_vqs(). If virtio_find_vqs() fails, the error path frees both pointers and returns an error to virtio_fs_probe(). virtio_fs_probe() then drops the last kobject reference, and virtio_fs_ktype_release() frees fs->vqs and fs->mq_map again. This leaves dangling pointers in struct virtio_fs and can trigger a double-free during probe failure cleanup. Set fs->vqs and fs->mq_map to NULL immediately after kfree() in the virtio_fs_setup_vqs() error path so that the later kobject release sees an uninitialized state and kfree(NULL) becomes harmless. This can be reproduced when a broken virtio-fs device advertises more request queues than the transport actually provides. In that case virtio_find_vqs() fails while setting up the extra queue, and the probe path reaches the double-free cleanup sequence.

CVSS 3.1 · 8.4 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-93209

Bluetooth: hci_core: use skb_get() instead of skb_clone() for req_skb

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: use skb_get() instead of skb_clone() for req_skb BT enable fails intermittently with -ETIMEDOUT (-110). The kernel log shows the HCI Read Local Version command was sent and the firmware replied with status 0x00 (logged by hci_req_cmd_complete() BT_DBG), but the waiter in __hci_cmd_sync_sk() never woke up and timed out after 10 s: bluetooth hci0: Opcode 0xfc00 // __hci_cmd_sync_sk bluetooth hci0: opcode 0xfc00 plen 1 // hci_cmd_sync_add bluetooth hci0: skb len 4 // hci_cmd_sync_alloc bluetooth hci0: length 1 // hci_req_sync_run Bluetooth: hci0 cmd_cnt 1 cmd queued 1 // hci_cmd_work Bluetooth: hci0 type 1 len 4 // hci_send_frame Bluetooth: opcode 0xfc00 status 0x00 // hci_req_cmd_complete <-- req_skb NULL: req_complete_skb not set, hci_cmd_sync_complete() never called, req_status stays HCI_REQ_PEND --> <-- 10 s later: wait_event_interruptible_timeout expires --> bluetooth hci0: end: err -110 // __hci_cmd_sync_sk The root cause is that hci_send_cmd_sync() clones the sent command into hdev->req_skb so that hci_req_cmd_complete() can locate the registered completion callback. Under memory pressure this skb_clone() fails, leaving hdev->req_skb NULL. The firmware reply is received and processed, but hci_req_cmd_complete() finds NULL req_skb, so hci_cmd_sync_complete() is never called, req_status stays HCI_REQ_PEND, and the waiter times out with -ETIMEDOUT. req_skb is only used to read bt_cb(skb)->hci callbacks and opcode -- it is never modified. Replace skb_clone() with skb_get(), which simply increments the reference count of hdev->sent_cmd without allocating new memory and therefore cannot fail. This issue was first observed as a use-after-free in ttyport_close() when ttyport_open() failed, which was investigated in an earlier patch series [1]. That investigation led to the discovery of the true root cause described above. [1] https://lore.kernel.org/all/20250430111617.1151390-1-quic_cxin@quicinc.com/

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-93215

cdx: Fix double free when sysfs file creation fails

In the Linux kernel, the following vulnerability has been resolved: cdx: Fix double free when sysfs file creation fails In cdx_create_res_attr(), if sysfs_create_bin_file() fails, the code frees res_attr but doesn't set cdx_dev->res_attr[num] to NULL. This leaves a dangling pointer in the array. Then cdx_destroy_res_attr() frees the already-freed memory. Fix the double free by initializing cdx_dev->res_attr[num] after sysfs_create_bin_file() completes.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-97932

tracing: Don't dereference trace_event_file in deferred trigger free

In the Linux kernel, the following vulnerability has been resolved: tracing: Don't dereference trace_event_file in deferred trigger free The enable_event trigger defers trace_event_put_ref() to the trigger free kthread, but the trace_event_file can already be freed when the instance is removed. Keep the trace_event_call directly in enable_trigger_data so the deferred free does not access the freed trace_event_file.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-97553

xfs: lock the healthmon when inserting unmount event

In the Linux kernel, the following vulnerability has been resolved: xfs: lock the healthmon when inserting unmount event LOLLM complains that xfs_healthmon_unmount does an unlocked insert of the unmount event into the health monitor's event list. Fix that.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-18711

Use-After-Free in MongoDB Query Execution Engine Leads to Denial of Service and Potential Memory Disclosure

An issue in MongoDB Server's query execution engine could allow an authenticated user with read and write privileges to cause an internal reference to be used after the underlying memory has been freed, when running certain queries against time-series collections. This could result in a server crash or disclosure of freed memory contents within query results.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Mongodb
Products
Mongodb Mongodb Server
CVE-2026-69441

Windows Installer Elevation of Privilege Vulnerability

Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Installer allows an authorized attacker to elevate privileges locally.

CVSS 3.1 · 7 High EPSS < 1% KEV · Not listed
Vendors
Microsoft
Products
Windows 10 1607 Windows 10 1809 Windows 10 21h2 and 23 more
CVE-2026-93262

md/raid5-ppl: fix use-after-free in ppl_do_flush()

In the Linux kernel, the following vulnerability has been resolved: md/raid5-ppl: fix use-after-free in ppl_do_flush() The loop in ppl_do_flush() continues iterating after calling ppl_io_unit_finished(), touching io->pending_flushes and leading to a use-after-free. Add a break statement to stop the loop once io is freed.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-93223

staging: media: tegra-video: fix of_node_put() on VIP parse errors

In the Linux kernel, the following vulnerability has been resolved: staging: media: tegra-video: fix of_node_put() on VIP parse errors tegra_vip_channel_of_parse() initializes np from dev->of_node without taking a reference, but its error paths drop one through the err_node_put label. This underflows the refcount of the VIP device's OF node when endpoint parsing fails on a malformed device tree. The only reference the function takes on np is the success-path of_node_get() stored in vip->chan.of_node, and that one is already released by the tegra_vip_init() error path and by tegra_vip_exit(). Return errors directly instead of jumping to the bogus cleanup label.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-93250

vxlan: mdb: Fix use-after-free in vxlan_mdb_flush()

In the Linux kernel, the following vulnerability has been resolved: vxlan: mdb: Fix use-after-free in vxlan_mdb_flush() vxlan_mdb_flush() iterates over the MDB entries using hlist_for_each_entry_safe(), which only tolerates the removal of the current entry. Contrary to the comment above the loop, the removal of an entry can trigger the removal of another entry. Flushing the remotes of a (*, G) entry also removes the (S, G) entries that were created for its source list, once they are left without remotes: vxlan_mdb_remotes_flush() -> vxlan_mdb_remote_del() -> vxlan_mdb_remote_srcs_del() -> vxlan_mdb_remote_src_del() -> vxlan_mdb_remote_src_fwd_del() -> __vxlan_mdb_del() -> vxlan_mdb_entry_put() Such an entry can be located after the (*, G) entry in the list, as vxlan_mdb_entry_get() returns an existing entry without moving it to the head of the list. This order is obtained by adding the (S, G) entry before the (*, G) entry, the latter with NLM_F_REPLACE, as the addition of the source otherwise fails with -EEXIST. The (S, G) entry is then the entry saved by hlist_for_each_entry_safe() and it is freed while the (*, G) entry is processed. The next iteration calls hlist_del() on it again, writing LIST_POISON1 to LIST_POISON2 [1]. Besides device deletion, the flush is also reachable from RTM_DELMDB with NLM_F_BULK. Fix by re-reading the next entry after the remotes were flushed. The current entry cannot be removed by this flush, as source lists can only be configured on (*, G) entries and the removed entries are (S, G) entries. It is therefore still linked and its next pointer reflects the removals. [1] BUG: KASAN: wild-memory-access in vxlan_mdb_entry_put.part.0+0x328/0x588 Write of size 8 at addr dead000000000122 by task ip/327 CPU: 3 UID: 1000 PID: 327 Comm: ip Not tainted 7.2.0-rc7 #2 PREEMPT Call trace: vxlan_mdb_entry_put.part.0+0x328/0x588 vxlan_mdb_flush+0x1d8/0x25c vxlan_mdb_fini+0x8c/0x100 vxlan_uninit+0x1c/0x7c unregister_netdevice_many_notify+0x954/0xd4c rtnl_dellink+0x210/0x530 rtnetlink_rcv_msg+0x434/0x4d0 netlink_rcv_skb+0xc4/0x204 rtnetlink_rcv+0x18/0x24 netlink_unicast+0x4b8/0x548 netlink_sendmsg+0x29c/0x560 ____sys_sendmsg+0x390/0x3ec ___sys_sendmsg+0x114/0x188 __sys_sendmsg+0xf0/0x178 __arm64_sys_sendmsg+0x48/0x60 invoke_syscall.constprop.0+0x58/0x180 el0_svc_common.constprop.0+0x74/0x140 do_el0_svc+0x30/0x40 el0_svc+0x38/0x98 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-93253

sched/isolation: Defer freeing of cpumask memblock memory to initcall

In the Linux kernel, the following vulnerability has been resolved: sched/isolation: Defer freeing of cpumask memblock memory to initcall When testing a linux-next kernel with commit 59bd1d914bb5 ("memblock: warn when freeing reserved memory before memory map is initialized"), the following warning was hit when there was a "nohz_full" kernel boot parameter. Cannot free reserved memory because of deferred initialization of the memory map WARNING: mm/memblock.c:904 at __free_reserved_area+0xde/0xf0, CPU#0: swapper/0/0 : Call Trace: <TASK> memblock_phys_free+0xcb/0x100 housekeeping_init+0x14c/0x170 start_kernel+0x207/0x450 x86_64_start_reservations+0x24/0x30 x86_64_start_kernel+0xda/0xe0 common_startup_64+0x13e/0x141 </TASK> IOW, we shouldn't free memblock allocated memory so early in the boot process when memory map isn't fully initialized in deferred_init_memmap(). Fix it by saving the housekeeping cpumask memblock memory to be freed into a llist free list in housekeeping_init() and add a new housekeeping_late_init() helper to defer the actual freeing of memblock memory to when initcall's are being processed. The cpumask memblock memory is treated as a llist_node with the size of a "long" type which is also smallest cpumask size that can be allocated. The non-atomic version of the llist APIs are used as there is no contention. This commit depends on the presence of commit 7c2eee9c1367 ("memblock: don't touch memblock arrays when memblock_free() is called late") to prevent a KASAN UAF bug report [1]. [1] https://lore.kernel.org/lkml/20260505051821.1107133-1-longman@redhat.com/

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-93277

RDMA/bnxt_re: Validate udata before executing commands

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Validate udata before executing commands The destroy callbacks currently zero the udata output after tearing down driver resources. If the userspace access fails, uverbs preserves the uobject and allows the destroy callback to run again, even though the driver resource has already been freed. Call ib_no_udata_io() before teardown so udata failures are detected while the resource is still intact, then return success after teardown completes. As part of this change, move ib_respond_empty_udata() to the start of the create and modify flows. While this is not strictly required for general create flows, as the core layer unwinds uobjects on failure, it is necessary for create AH. In _rdma_create_ah(), the HW object is otherwise leaked.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-69398

Windows Bluetooth Service Elevation of Privilege Vulnerability

Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Bluetooth Service allows an authorized attacker to elevate privileges locally.

CVSS 3.1 · 7 High EPSS < 1% KEV · Not listed
Vendors
Microsoft
Products
Windows 10 1809 Windows 10 21h2 Windows 10 21h2 and 15 more
CVE-2026-70570

Windows Routing and Remote Access Service (RRAS) Remote Code Execution Vulnerability

Remote Code Execution in Windows Routing and Remote Access Service (RRAS) allows attacker to gain an unauthorized access to victim's machine

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Microsoft
Products
Windows 10 1607 Windows 10 1809 Windows 10 21h2 and 23 more