| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Make it so that a waiting process can be aborted
When sendmsg() creates an rxrpc call, it queues it to wait for a connection
and channel to be assigned and then waits before it can start shovelling
data as the encrypted DATA packet content includes a summary of the
connection parameters.
However, sendmsg() may get interrupted before a connection gets assigned
and further sendmsg() calls will fail with EBUSY until an assignment is
made.
Fix this so that the call can at least be aborted without failing on
EBUSY. We have to be careful here as sendmsg() mustn't be allowed to start
the call timer if the call doesn't yet have a connection assigned as an
oops may follow shortly thereafter. |
| In the Linux kernel, the following vulnerability has been resolved:
md: Replace snprintf with scnprintf
Current code produces a warning as shown below when total characters
in the constituent block device names plus the slashes exceeds 200.
snprintf() returns the number of characters generated from the given
input, which could cause the expression “200 – len” to wrap around
to a large positive number. Fix this by using scnprintf() instead,
which returns the actual number of characters written into the buffer.
[ 1513.267938] ------------[ cut here ]------------
[ 1513.267943] WARNING: CPU: 15 PID: 37247 at <snip>/lib/vsprintf.c:2509 vsnprintf+0x2c8/0x510
[ 1513.267944] Modules linked in: <snip>
[ 1513.267969] CPU: 15 PID: 37247 Comm: mdadm Not tainted 5.4.0-1085-azure #90~18.04.1-Ubuntu
[ 1513.267969] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022
[ 1513.267971] RIP: 0010:vsnprintf+0x2c8/0x510
<-snip->
[ 1513.267982] Call Trace:
[ 1513.267986] snprintf+0x45/0x70
[ 1513.267990] ? disk_name+0x71/0xa0
[ 1513.267993] dump_zones+0x114/0x240 [raid0]
[ 1513.267996] ? _cond_resched+0x19/0x40
[ 1513.267998] raid0_run+0x19e/0x270 [raid0]
[ 1513.268000] md_run+0x5e0/0xc50
[ 1513.268003] ? security_capable+0x3f/0x60
[ 1513.268005] do_md_run+0x19/0x110
[ 1513.268006] md_ioctl+0x195e/0x1f90
[ 1513.268007] blkdev_ioctl+0x91f/0x9f0
[ 1513.268010] block_ioctl+0x3d/0x50
[ 1513.268012] do_vfs_ioctl+0xa9/0x640
[ 1513.268014] ? __fput+0x162/0x260
[ 1513.268016] ksys_ioctl+0x75/0x80
[ 1513.268017] __x64_sys_ioctl+0x1a/0x20
[ 1513.268019] do_syscall_64+0x5e/0x200
[ 1513.268021] entry_SYSCALL_64_after_hwframe+0x44/0xa9 |
| In the Linux kernel, the following vulnerability has been resolved:
nubus: Partially revert proc_create_single_data() conversion
The conversion to proc_create_single_data() introduced a regression
whereby reading a file in /proc/bus/nubus results in a seg fault:
# grep -r . /proc/bus/nubus/e/
Data read fault at 0x00000020 in Super Data (pc=0x1074c2)
BAD KERNEL BUSERR
Oops: 00000000
Modules linked in:
PC: [<001074c2>] PDE_DATA+0xc/0x16
SR: 2010 SP: 38284958 a2: 01152370
d0: 00000001 d1: 01013000 d2: 01002790 d3: 00000000
d4: 00000001 d5: 0008ce2e a0: 00000000 a1: 00222a40
Process grep (pid: 45, task=142f8727)
Frame format=B ssw=074d isc=2008 isb=4e5e daddr=00000020 dobuf=01199e70
baddr=001074c8 dibuf=ffffffff ver=f
Stack from 01199e48:
01199e70 00222a58 01002790 00000000 011a3000 01199eb0 015000c0 00000000
00000000 01199ec0 01199ec0 000d551a 011a3000 00000001 00000000 00018000
d003f000 00000003 00000001 0002800d 01052840 01199fa8 c01f8000 00000000
00000029 0b532b80 00000000 00000000 00000029 0b532b80 01199ee4 00103640
011198c0 d003f000 00018000 01199fa8 00000000 011198c0 00000000 01199f4c
000b3344 011198c0 d003f000 00018000 01199fa8 00000000 00018000 011198c0
Call Trace: [<00222a58>] nubus_proc_rsrc_show+0x18/0xa0
[<000d551a>] seq_read+0xc4/0x510
[<00018000>] fp_fcos+0x2/0x82
[<0002800d>] __sys_setreuid+0x115/0x1c6
[<00103640>] proc_reg_read+0x5c/0xb0
[<00018000>] fp_fcos+0x2/0x82
[<000b3344>] __vfs_read+0x2c/0x13c
[<00018000>] fp_fcos+0x2/0x82
[<00018000>] fp_fcos+0x2/0x82
[<000b8aa2>] sys_statx+0x60/0x7e
[<000b34b6>] vfs_read+0x62/0x12a
[<00018000>] fp_fcos+0x2/0x82
[<00018000>] fp_fcos+0x2/0x82
[<000b39c2>] ksys_read+0x48/0xbe
[<00018000>] fp_fcos+0x2/0x82
[<000b3a4e>] sys_read+0x16/0x1a
[<00018000>] fp_fcos+0x2/0x82
[<00002b84>] syscall+0x8/0xc
[<00018000>] fp_fcos+0x2/0x82
[<0000c016>] not_ext+0xa/0x18
Code: 4e5e 4e75 4e56 0000 206e 0008 2068 ffe8 <2068> 0020 2008 4e5e 4e75 4e56 0000 2f0b 206e 0008 2068 0004 2668 0020 206b ffe8
Disabling lock debugging due to kernel taint
Segmentation fault
The proc_create_single_data() conversion does not work because
single_open(file, nubus_proc_rsrc_show, PDE_DATA(inode)) is not
equivalent to the original code. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync
hci_update_accept_list_sync iterates over hdev->pend_le_conns and
hdev->pend_le_reports, and waits for controller events in the loop body,
without holding hdev lock.
Meanwhile, these lists and the items may be modified e.g. by
le_scan_cleanup. This can invalidate the list cursor or any other item
in the list, resulting to invalid behavior (eg use-after-free).
Use RCU for the hci_conn_params action lists. Since the loop bodies in
hci_sync block and we cannot use RCU or hdev->lock for the whole loop,
copy list items first and then iterate on the copy. Only the flags field
is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we
read valid values.
Free params everywhere with hci_conn_params_free so the cleanup is
guaranteed to be done properly.
This fixes the following, which can be triggered e.g. by BlueZ new
mgmt-tester case "Add + Remove Device Nowait - Success", or by changing
hci_le_set_cig_params to always return false, and running iso-tester:
==================================================================
BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107)
print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65)
? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
kasan_report (mm/kasan/report.c:538)
? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780)
? mutex_lock (kernel/locking/mutex.c:282)
? __pfx_mutex_lock (kernel/locking/mutex.c:282)
? __pfx_mutex_unlock (kernel/locking/mutex.c:538)
? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861)
hci_cmd_sync_work (net/bluetooth/hci_sync.c:306)
process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538)
? __pfx_worker_thread (kernel/workqueue.c:2480)
kthread (kernel/kthread.c:376)
? __pfx_kthread (kernel/kthread.c:331)
ret_from_fork (arch/x86/entry/entry_64.S:314)
</TASK>
Allocated by task 31:
kasan_save_stack (mm/kasan/common.c:46)
kasan_set_track (mm/kasan/common.c:52)
__kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383)
hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277)
hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589)
hci_connect_cis (net/bluetooth/hci_conn.c:2266)
iso_connect_cis (net/bluetooth/iso.c:390)
iso_sock_connect (net/bluetooth/iso.c:899)
__sys_connect (net/socket.c:2003 net/socket.c:2020)
__x64_sys_connect (net/socket.c:2027)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
Freed by task 15:
kasan_save_stack (mm/kasan/common.c:46)
kasan_set_track (mm/kasan/common.c:52)
kasan_save_free_info (mm/kasan/generic.c:523)
__kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244)
__kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800)
hci_conn_params_del (net/bluetooth/hci_core.c:2323)
le_scan_cleanup (net/bluetooth/hci_conn.c:202)
process_one_work (./arch/x86/include/asm/preempt.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
chardev: fix error handling in cdev_device_add()
While doing fault injection test, I got the following report:
------------[ cut here ]------------
kobject: '(null)' (0000000039956980): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 3 PID: 6306 at kobject_put+0x23d/0x4e0
CPU: 3 PID: 6306 Comm: 283 Tainted: G W 6.1.0-rc2-00005-g307c1086d7c9 #1253
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:kobject_put+0x23d/0x4e0
Call Trace:
<TASK>
cdev_device_add+0x15e/0x1b0
__iio_device_register+0x13b4/0x1af0 [industrialio]
__devm_iio_device_register+0x22/0x90 [industrialio]
max517_probe+0x3d8/0x6b4 [max517]
i2c_device_probe+0xa81/0xc00
When device_add() is injected fault and returns error, if dev->devt is not set,
cdev_add() is not called, cdev_del() is not needed. Fix this by checking dev->devt
in error path. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix deadlock triggered by cancel_delayed_work_syn()
The following LOCKDEP was detected:
Workqueue: events smc_lgr_free_work [smc]
WARNING: possible circular locking dependency detected
6.1.0-20221027.rc2.git8.56bc5b569087.300.fc36.s390x+debug #1 Not tainted
------------------------------------------------------
kworker/3:0/176251 is trying to acquire lock:
00000000f1467148 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0},
at: __flush_workqueue+0x7a/0x4f0
but task is already holding lock:
0000037fffe97dc8 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0},
at: process_one_work+0x232/0x730
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0}:
__lock_acquire+0x58e/0xbd8
lock_acquire.part.0+0xe2/0x248
lock_acquire+0xac/0x1c8
__flush_work+0x76/0xf0
__cancel_work_timer+0x170/0x220
__smc_lgr_terminate.part.0+0x34/0x1c0 [smc]
smc_connect_rdma+0x15e/0x418 [smc]
__smc_connect+0x234/0x480 [smc]
smc_connect+0x1d6/0x230 [smc]
__sys_connect+0x90/0xc0
__do_sys_socketcall+0x186/0x370
__do_syscall+0x1da/0x208
system_call+0x82/0xb0
-> #3 (smc_client_lgr_pending){+.+.}-{3:3}:
__lock_acquire+0x58e/0xbd8
lock_acquire.part.0+0xe2/0x248
lock_acquire+0xac/0x1c8
__mutex_lock+0x96/0x8e8
mutex_lock_nested+0x32/0x40
smc_connect_rdma+0xa4/0x418 [smc]
__smc_connect+0x234/0x480 [smc]
smc_connect+0x1d6/0x230 [smc]
__sys_connect+0x90/0xc0
__do_sys_socketcall+0x186/0x370
__do_syscall+0x1da/0x208
system_call+0x82/0xb0
-> #2 (sk_lock-AF_SMC){+.+.}-{0:0}:
__lock_acquire+0x58e/0xbd8
lock_acquire.part.0+0xe2/0x248
lock_acquire+0xac/0x1c8
lock_sock_nested+0x46/0xa8
smc_tx_work+0x34/0x50 [smc]
process_one_work+0x30c/0x730
worker_thread+0x62/0x420
kthread+0x138/0x150
__ret_from_fork+0x3c/0x58
ret_from_fork+0xa/0x40
-> #1 ((work_completion)(&(&smc->conn.tx_work)->work)){+.+.}-{0:0}:
__lock_acquire+0x58e/0xbd8
lock_acquire.part.0+0xe2/0x248
lock_acquire+0xac/0x1c8
process_one_work+0x2bc/0x730
worker_thread+0x62/0x420
kthread+0x138/0x150
__ret_from_fork+0x3c/0x58
ret_from_fork+0xa/0x40
-> #0 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0}:
check_prev_add+0xd8/0xe88
validate_chain+0x70c/0xb20
__lock_acquire+0x58e/0xbd8
lock_acquire.part.0+0xe2/0x248
lock_acquire+0xac/0x1c8
__flush_workqueue+0xaa/0x4f0
drain_workqueue+0xaa/0x158
destroy_workqueue+0x44/0x2d8
smc_lgr_free+0x9e/0xf8 [smc]
process_one_work+0x30c/0x730
worker_thread+0x62/0x420
kthread+0x138/0x150
__ret_from_fork+0x3c/0x58
ret_from_fork+0xa/0x40
other info that might help us debug this:
Chain exists of:
(wq_completion)smc_tx_wq-00000000#2
--> smc_client_lgr_pending
--> (work_completion)(&(&lgr->free_work)->work)
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock((work_completion)(&(&lgr->free_work)->work));
lock(smc_client_lgr_pending);
lock((work_completion)
(&(&lgr->free_work)->work));
lock((wq_completion)smc_tx_wq-00000000#2);
*** DEADLOCK ***
2 locks held by kworker/3:0/176251:
#0: 0000000080183548
((wq_completion)events){+.+.}-{0:0},
at: process_one_work+0x232/0x730
#1: 0000037fffe97dc8
((work_completion)
(&(&lgr->free_work)->work)){+.+.}-{0:0},
at: process_one_work+0x232/0x730
stack backtr
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: jfs_dmap: Validate db_l2nbperpage while mounting
In jfs_dmap.c at line 381, BLKTODMAP is used to get a logical block
number inside dbFree(). db_l2nbperpage, which is the log2 number of
blocks per page, is passed as an argument to BLKTODMAP which uses it
for shifting.
Syzbot reported a shift out-of-bounds crash because db_l2nbperpage is
too big. This happens because the large value is set without any
validation in dbMount() at line 181.
Thus, make sure that db_l2nbperpage is correct while mounting.
Max number of blocks per page = Page size / Min block size
=> log2(Max num_block per page) = log2(Page size / Min block size)
= log2(Page size) - log2(Min block size)
=> Max db_l2nbperpage = L2PSIZE - L2MINBLOCKSIZE |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: fix out-of-bounds access on cio_ignore free
The channel-subsystem-driver scans for newly available devices whenever
device-IDs are removed from the cio_ignore list using a command such as:
echo free >/proc/cio_ignore
Since an I/O device scan might interfer with running I/Os, commit
172da89ed0ea ("s390/cio: avoid excessive path-verification requests")
introduced an optimization to exclude online devices from the scan.
The newly added check for online devices incorrectly assumes that
an I/O-subchannel's drvdata points to a struct io_subchannel_private.
For devices that are bound to a non-default I/O subchannel driver, such
as the vfio_ccw driver, this results in an out-of-bounds read access
during each scan.
Fix this by changing the scan logic to rely on a driver-independent
online indication. For this we can use struct subchannel->config.ena,
which is the driver's requested subchannel-enabled state. Since I/Os
can only be started on enabled subchannels, this matches the intent
of the original optimization of not scanning devices where I/O might
be running. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: SGI-IP27: Fix platform-device leak in bridge_platform_create()
In error case in bridge_platform_create after calling
platform_device_add()/platform_device_add_data()/
platform_device_add_resources(), release the failed
'pdev' or it will be leak, call platform_device_put()
to fix this problem.
Besides, 'pdev' is divided into 'pdev_wd' and 'pdev_bd',
use platform_device_unregister() to release sgi_w1
resources when xtalk-bridge registration fails. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost/vsock: Use kvmalloc/kvfree for larger packets.
When copying a large file over sftp over vsock, data size is usually 32kB,
and kmalloc seems to fail to try to allocate 32 32kB regions.
vhost-5837: page allocation failure: order:4, mode:0x24040c0
Call Trace:
[<ffffffffb6a0df64>] dump_stack+0x97/0xdb
[<ffffffffb68d6aed>] warn_alloc_failed+0x10f/0x138
[<ffffffffb68d868a>] ? __alloc_pages_direct_compact+0x38/0xc8
[<ffffffffb664619f>] __alloc_pages_nodemask+0x84c/0x90d
[<ffffffffb6646e56>] alloc_kmem_pages+0x17/0x19
[<ffffffffb6653a26>] kmalloc_order_trace+0x2b/0xdb
[<ffffffffb66682f3>] __kmalloc+0x177/0x1f7
[<ffffffffb66e0d94>] ? copy_from_iter+0x8d/0x31d
[<ffffffffc0689ab7>] vhost_vsock_handle_tx_kick+0x1fa/0x301 [vhost_vsock]
[<ffffffffc06828d9>] vhost_worker+0xf7/0x157 [vhost]
[<ffffffffb683ddce>] kthread+0xfd/0x105
[<ffffffffc06827e2>] ? vhost_dev_set_owner+0x22e/0x22e [vhost]
[<ffffffffb683dcd1>] ? flush_kthread_worker+0xf3/0xf3
[<ffffffffb6eb332e>] ret_from_fork+0x4e/0x80
[<ffffffffb683dcd1>] ? flush_kthread_worker+0xf3/0xf3
Work around by doing kvmalloc instead. |
| In the Linux kernel, the following vulnerability has been resolved:
mt76: mt7921: fix kernel panic by accessing unallocated eeprom.data
The MT7921 driver no longer uses eeprom.data, but the relevant code has not
been removed completely since
commit 16d98b548365 ("mt76: mt7921: rely on mcu_get_nic_capability").
This could result in potential invalid memory access.
To fix the kernel panic issue in mt7921, it is necessary to avoid accessing
unallocated eeprom.data which can lead to invalid memory access.
Furthermore, it is possible to entirely eliminate the
mt7921_mcu_parse_eeprom function and solely depend on
mt7921_mcu_parse_response to divide the RxD header.
[2.702735] BUG: kernel NULL pointer dereference, address: 0000000000000550
[2.702740] #PF: supervisor write access in kernel mode
[2.702741] #PF: error_code(0x0002) - not-present page
[2.702743] PGD 0 P4D 0
[2.702747] Oops: 0002 [#1] PREEMPT SMP NOPTI
[2.702755] RIP: 0010:mt7921_mcu_parse_response+0x147/0x170 [mt7921_common]
[2.702758] RSP: 0018:ffffae7c00fef828 EFLAGS: 00010286
[2.702760] RAX: ffffa367f57be024 RBX: ffffa367cc7bf500 RCX: 0000000000000000
[2.702762] RDX: 0000000000000550 RSI: 0000000000000000 RDI: ffffa367cc7bf500
[2.702763] RBP: ffffae7c00fef840 R08: ffffa367cb167000 R09: 0000000000000005
[2.702764] R10: 0000000000000000 R11: ffffffffc04702e4 R12: ffffa367e8329f40
[2.702766] R13: 0000000000000000 R14: 0000000000000001 R15: ffffa367e8329f40
[2.702768] FS: 000079ee6cf20c40(0000) GS:ffffa36b2f940000(0000) knlGS:0000000000000000
[2.702769] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[2.702775] CR2: 0000000000000550 CR3: 00000001233c6004 CR4: 0000000000770ee0
[2.702776] PKRU: 55555554
[2.702777] Call Trace:
[2.702782] mt76_mcu_skb_send_and_get_msg+0xc3/0x11e [mt76 <HASH:1bc4 5>]
[2.702785] mt7921_run_firmware+0x241/0x853 [mt7921_common <HASH:6a2f 6>]
[2.702789] mt7921e_mcu_init+0x2b/0x56 [mt7921e <HASH:d290 7>]
[2.702792] mt7921_register_device+0x2eb/0x5a5 [mt7921_common <HASH:6a2f 6>]
[2.702795] ? mt7921_irq_tasklet+0x1d4/0x1d4 [mt7921e <HASH:d290 7>]
[2.702797] mt7921_pci_probe+0x2d6/0x319 [mt7921e <HASH:d290 7>]
[2.702799] pci_device_probe+0x9f/0x12a |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: Add checks for devm_kcalloc
As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: pcie: fix NULL pointer dereference in iwl_pcie_irq_rx_msix_handler()
rxq can be NULL only when trans_pcie->rxq is NULL and entry->entry
is zero. For the case when entry->entry is not equal to 0, rxq
won't be NULL even if trans_pcie->rxq is NULL. Modify checker to
check for trans_pcie->rxq. |
| In the Linux kernel, the following vulnerability has been resolved:
ipc: fix memory leak in init_mqueue_fs()
When setup_mq_sysctls() failed in init_mqueue_fs(), mqueue_inode_cachep is
not released. In order to fix this issue, the release path is reordered. |
| In the Linux kernel, the following vulnerability has been resolved:
PM: domains: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: drop redundant sched job cleanup when cs is aborted
Once command submission failed due to userptr invalidation in
amdgpu_cs_submit, legacy code will perform cleanup of scheduler
job. However, it's not needed at all, as former commit has integrated
job cleanup stuff into amdgpu_job_free. Otherwise, because of double
free, a NULL pointer dereference will occur in such scenario.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457 |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Do not corrupt the pfn list when doing batch carry
If batch->end is 0 then setting npfns[0] before computing the new value of
pfns will fail to adjust the pfn and result in various page accounting
corruptions. It should be ordered after.
This seems to result in various kinds of page meta-data corruption related
failures:
WARNING: CPU: 1 PID: 527 at mm/gup.c:75 try_grab_folio+0x503/0x740
Modules linked in:
CPU: 1 PID: 527 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:try_grab_folio+0x503/0x740
Code: e3 01 48 89 de e8 6d c1 dd ff 48 85 db 0f 84 7c fe ff ff e8 4f bf dd ff 49 8d 47 ff 48 89 45 d0 e9 73 fe ff ff e8 3d bf dd ff <0f> 0b 31 db e9 d0 fc ff ff e8 2f bf dd ff 48 8b 5d c8 31 ff 48 89
RSP: 0018:ffffc90000f37908 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 00000000fffffc02 RCX: ffffffff81504c26
RDX: 0000000000000000 RSI: ffff88800d030000 RDI: 0000000000000002
RBP: ffffc90000f37948 R08: 000000000003ca24 R09: 0000000000000008
R10: 000000000003ca00 R11: 0000000000000023 R12: ffffea000035d540
R13: 0000000000000001 R14: 0000000000000000 R15: ffffea000035d540
FS: 00007fecbf659740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200011c3 CR3: 000000000ef66006 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
internal_get_user_pages_fast+0xd32/0x2200
pin_user_pages_fast+0x65/0x90
pfn_reader_user_pin+0x376/0x390
pfn_reader_next+0x14a/0x7b0
pfn_reader_first+0x140/0x1b0
iopt_area_fill_domain+0x74/0x210
iopt_table_add_domain+0x30e/0x6e0
iommufd_device_selftest_attach+0x7f/0x140
iommufd_test+0x10ff/0x16f0
iommufd_fops_ioctl+0x206/0x330
__x64_sys_ioctl+0x10e/0x160
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/bios: fix a memory leak in generate_lfp_data_ptrs
When (size != 0 || ptrs->lvds_ entries != 3), the program tries to
free() the ptrs. However, the ptrs is not created by calling kzmalloc(),
but is obtained by pointer offset operation.
This may lead to memory leaks or undefined behavior.
Fix this by replacing the arguments of kfree() with ptrs_block.
(cherry picked from commit 7674cd0b7d28b952151c3df26bbfa7e07eb2b4ec) |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/omap: Fix buffer overflow in debugfs
There are two issues here:
1) The "len" variable needs to be checked before the very first write.
Otherwise if omap2_iommu_dump_ctx() with "bytes" less than 32 it is a
buffer overflow.
2) The snprintf() function returns the number of bytes that *would* have
been copied if there were enough space. But we want to know the
number of bytes which were *actually* copied so use scnprintf()
instead. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Fix OOB and integer underflow when rx packets
Make sure mwifiex_process_mgmt_packet,
mwifiex_process_sta_rx_packet and mwifiex_process_uap_rx_packet,
mwifiex_uap_queue_bridged_pkt and mwifiex_process_rx_packet
not out-of-bounds access the skb->data buffer. |
