| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu()
Memory pointed by 'nd_pmu->pmu.attr_groups' is allocated in function
'register_nvdimm_pmu' and is lost after 'kfree(nd_pmu)' call in function
'unregister_nvdimm_pmu'. |
| In langgenius/dify-web version 1.6.0, the authentication mechanism reveals the existence of user accounts by returning different error messages for non-existent and existing accounts. Specifically, when a login or registration attempt is made with a non-existent username or email, the system responds with a message such as "account not found." Conversely, when the username or email exists but the password is incorrect, a different error message is returned. This discrepancy allows an attacker to enumerate valid user accounts by analyzing the error responses, potentially facilitating targeted social engineering, brute force, or credential stuffing attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-throttle: prevent overflow while calculating wait time
There is a problem found by code review in tg_with_in_bps_limit() that
'bps_limit * jiffy_elapsed_rnd' might overflow. Fix the problem by
calling mul_u64_u64_div_u64() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_hid: fix f_hidg lifetime vs cdev
The embedded struct cdev does not have its lifetime correctly tied to
the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN
is held open while the gadget is deleted.
This can readily be replicated with libusbgx's example programs (for
conciseness - operating directly via configfs is equivalent):
gadget-hid
exec 3<> /dev/hidg0
gadget-vid-pid-remove
exec 3<&-
Pull the existing device up in to struct f_hidg and make use of the
cdev_device_{add,del}() helpers. This changes the lifetime of the
device object to match struct f_hidg, but note that it is still added
and deleted at the same time. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: jfs: fix shift-out-of-bounds in dbAllocAG
Syzbot found a crash : UBSAN: shift-out-of-bounds in dbAllocAG. The
underlying bug is the missing check of bmp->db_agl2size. The field can
be greater than 64 and trigger the shift-out-of-bounds.
Fix this bug by adding a check of bmp->db_agl2size in dbMount since this
field is used in many following functions. The upper bound for this
field is L2MAXL2SIZE - L2MAXAG, thanks for the help of Dave Kleikamp.
Note that, for maintenance, I reorganized error handling code of dbMount. |
| NLnet Labs Unbound up to and including version 1.24.0 is vulnerable to possible domain hijack attacks. Promiscuous NS RRSets that complement positive DNS replies in the authority section can be used to trick resolvers to update their delegation information for the zone. Usually these RRSets are used to update the resolver's knowledge of the zone's name servers. A malicious actor can exploit the possible poisonous effect by injecting NS RRSets (and possibly their respective address records) in a reply. This could be done for example by trying to spoof a packet or fragmentation attacks. Unbound would then proceed to update the NS RRSet data it already has since the new data has enough trust for it, i.e., in-zone data for the delegation point. Unbound 1.24.1 includes a fix that scrubs unsolicited NS RRSets (and their respective address records) from replies mitigating the possible poison effect. |
| TOTOLINK N600R v4.3.0cu.7866_B20220506 was discovered to contain a stack overflow in the ssid parameter in the setWiFiBasicConfig function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: Fix the memory leak in raw_gadget driver
Currently, increasing raw_dev->count happens before invoke the
raw_queue_event(), if the raw_queue_event() return error, invoke
raw_release() will not trigger the dev_free() to be called.
[ 268.905865][ T5067] raw-gadget.0 gadget.0: failed to queue event
[ 268.912053][ T5067] udc dummy_udc.0: failed to start USB Raw Gadget: -12
[ 268.918885][ T5067] raw-gadget.0: probe of gadget.0 failed with error -12
[ 268.925956][ T5067] UDC core: USB Raw Gadget: couldn't find an available UDC or it's busy
[ 268.934657][ T5067] misc raw-gadget: fail, usb_gadget_register_driver returned -16
BUG: memory leak
[<ffffffff8154bf94>] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076
[<ffffffff8347eb55>] kmalloc include/linux/slab.h:582 [inline]
[<ffffffff8347eb55>] kzalloc include/linux/slab.h:703 [inline]
[<ffffffff8347eb55>] dev_new drivers/usb/gadget/legacy/raw_gadget.c:191 [inline]
[<ffffffff8347eb55>] raw_open+0x45/0x110 drivers/usb/gadget/legacy/raw_gadget.c:385
[<ffffffff827d1d09>] misc_open+0x1a9/0x1f0 drivers/char/misc.c:165
[<ffffffff8154bf94>] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076
[<ffffffff8347cd2f>] kmalloc include/linux/slab.h:582 [inline]
[<ffffffff8347cd2f>] raw_ioctl_init+0xdf/0x410 drivers/usb/gadget/legacy/raw_gadget.c:460
[<ffffffff8347dfe9>] raw_ioctl+0x5f9/0x1120 drivers/usb/gadget/legacy/raw_gadget.c:1250
[<ffffffff81685173>] vfs_ioctl fs/ioctl.c:51 [inline]
[<ffffffff8154bf94>] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076
[<ffffffff833ecc6a>] kmalloc include/linux/slab.h:582 [inline]
[<ffffffff833ecc6a>] kzalloc include/linux/slab.h:703 [inline]
[<ffffffff833ecc6a>] dummy_alloc_request+0x5a/0xe0 drivers/usb/gadget/udc/dummy_hcd.c:665
[<ffffffff833e9132>] usb_ep_alloc_request+0x22/0xd0 drivers/usb/gadget/udc/core.c:196
[<ffffffff8347f13d>] gadget_bind+0x6d/0x370 drivers/usb/gadget/legacy/raw_gadget.c:292
This commit therefore invoke kref_get() under the condition that
raw_queue_event() return success. |
| TOTOLINK N600R v4.3.0cu.7866_B20220506 was discovered to contain a stack overflow in the wepkey2 parameter in the setWiFiMultipleConfig function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource()
As 'kdata.num' is user-controlled data, if user tries to allocate
memory larger than(>=) MAX_ORDER, then kcalloc() will fail, it
creates a stack trace and messes up dmesg with a warning.
Call trace:
-> privcmd_ioctl
--> privcmd_ioctl_mmap_resource
Add __GFP_NOWARN in order to avoid too large allocation warning.
This is detected by static analysis using smatch. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: pch: Fix PCI device refcount leak in pch_request_dma()
As comment of pci_get_slot() says, it returns a pci_device with its
refcount increased. The caller must decrement the reference count by
calling pci_dev_put().
Since 'dma_dev' is only used to filter the channel in filter(), we can
call pci_dev_put() before exiting from pch_request_dma(). Add the
missing pci_dev_put() for the normal and error path. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: fix refcount underflow in error path
Fix a refcount underflow problem reported by syzbot that can happen
when a system is running out of memory. If xp_alloc_tx_descs() fails,
and it can only fail due to not having enough memory, then the error
path is triggered. In this error path, the refcount of the pool is
decremented as it has incremented before. However, the reference to
the pool in the socket was not nulled. This means that when the socket
is closed later, the socket teardown logic will think that there is a
pool attached to the socket and try to decrease the refcount again,
leading to a refcount underflow.
I chose this fix as it involved adding just a single line. Another
option would have been to move xp_get_pool() and the assignment of
xs->pool to after the if-statement and using xs_umem->pool instead of
xs->pool in the whole if-statement resulting in somewhat simpler code,
but this would have led to much more churn in the code base perhaps
making it harder to backport. |
| In the Linux kernel, the following vulnerability has been resolved:
regmap-irq: Use the new num_config_regs property in regmap_add_irq_chip_fwnode
Commit faa87ce9196d ("regmap-irq: Introduce config registers for irq
types") added the num_config_regs, then commit 9edd4f5aee84 ("regmap-irq:
Deprecate type registers and virtual registers") suggested to replace
num_type_reg with it. However, regmap_add_irq_chip_fwnode wasn't modified
to use the new property. Later on, commit 255a03bb1bb3 ("ASoC: wcd9335:
Convert irq chip to config regs") removed the old num_type_reg property
from the WCD9335 driver's struct regmap_irq_chip, causing a null pointer
dereference in regmap_irq_set_type when it tried to index d->type_buf as
it was never allocated in regmap_add_irq_chip_fwnode:
[ 39.199374] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 39.200006] Call trace:
[ 39.200014] regmap_irq_set_type+0x84/0x1c0
[ 39.200026] __irq_set_trigger+0x60/0x1c0
[ 39.200040] __setup_irq+0x2f4/0x78c
[ 39.200051] request_threaded_irq+0xe8/0x1a0
Use num_config_regs in regmap_add_irq_chip_fwnode instead of num_type_reg,
and fall back to it if num_config_regs isn't defined to maintain backward
compatibility. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Fix potential null-ptr-deref due to drmm_mode_config_init()
drmm_mode_config_init() will call drm_mode_create_standard_properties()
and won't check the ret value. When drm_mode_create_standard_properties()
failed due to alloc, property will be a NULL pointer and may causes the
null-ptr-deref. Fix the null-ptr-deref by adding the ret value check.
Found null-ptr-deref while testing insert module bochs:
general protection fault, probably for non-canonical address
0xdffffc000000000c: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
CPU: 3 PID: 249 Comm: modprobe Not tainted 6.1.0-rc1+ #364
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:drm_object_attach_property+0x73/0x3c0 [drm]
Call Trace:
<TASK>
__drm_connector_init+0xb6c/0x1100 [drm]
bochs_pci_probe.cold.11+0x4cb/0x7fe [bochs]
pci_device_probe+0x17d/0x340
really_probe+0x1db/0x5d0
__driver_probe_device+0x1e7/0x250
driver_probe_device+0x4a/0x120
__driver_attach+0xcd/0x2c0
bus_for_each_dev+0x11a/0x1b0
bus_add_driver+0x3d7/0x500
driver_register+0x18e/0x320
do_one_initcall+0xc4/0x3e0
do_init_module+0x1b4/0x630
load_module+0x5dca/0x7230
__do_sys_finit_module+0x100/0x170
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff65af9f839 |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: ftrace: Fixup panic by disabling preemption
In RISCV, we must use an AUIPC + JALR pair to encode an immediate,
forming a jump that jumps to an address over 4K. This may cause errors
if we want to enable kernel preemption and remove dependency from
patching code with stop_machine(). For example, if a task was switched
out on auipc. And, if we changed the ftrace function before it was
switched back, then it would jump to an address that has updated 11:0
bits mixing with previous XLEN:12 part.
p: patched area performed by dynamic ftrace
ftrace_prologue:
p| REG_S ra, -SZREG(sp)
p| auipc ra, 0x? ------------> preempted
...
change ftrace function
...
p| jalr -?(ra) <------------- switched back
p| REG_L ra, -SZREG(sp)
func:
xxx
ret |
| In the Linux kernel, the following vulnerability has been resolved:
drm/omap: dss: Fix refcount leak bugs
In dss_init_ports() and __dss_uninit_ports(), we should call
of_node_put() for the reference returned by of_graph_get_port_by_id()
in fail path or when it is not used anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs: fix OOB Read in __hfs_brec_find
Syzbot reported a OOB read bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in hfs_strcmp+0x117/0x190
fs/hfs/string.c:84
Read of size 1 at addr ffff88807eb62c4e by task kworker/u4:1/11
CPU: 1 PID: 11 Comm: kworker/u4:1 Not tainted
6.1.0-rc6-syzkaller-00308-g644e9524388a #0
Workqueue: writeback wb_workfn (flush-7:0)
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:284
print_report+0x107/0x1f0 mm/kasan/report.c:395
kasan_report+0xcd/0x100 mm/kasan/report.c:495
hfs_strcmp+0x117/0x190 fs/hfs/string.c:84
__hfs_brec_find+0x213/0x5c0 fs/hfs/bfind.c:75
hfs_brec_find+0x276/0x520 fs/hfs/bfind.c:138
hfs_write_inode+0x34c/0xb40 fs/hfs/inode.c:462
write_inode fs/fs-writeback.c:1440 [inline]
If the input inode of hfs_write_inode() is incorrect:
struct inode
struct hfs_inode_info
struct hfs_cat_key
struct hfs_name
u8 len # len is greater than HFS_NAMELEN(31) which is the
maximum length of an HFS filename
OOB read occurred:
hfs_write_inode()
hfs_brec_find()
__hfs_brec_find()
hfs_cat_keycmp()
hfs_strcmp() # OOB read occurred due to len is too large
Fix this by adding a Check on len in hfs_write_inode() before calling
hfs_brec_find(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: fix memory leak in iio_device_register_eventset()
When iio_device_register_sysfs_group() returns failed,
iio_device_register_eventset() needs to free attrs array.
Otherwise, kmemleak would scan & report memory leak as below:
unreferenced object 0xffff88810a1cc3c0 (size 32):
comm "100-i2c-vcnl302", pid 728, jiffies 4295052307 (age 156.027s)
backtrace:
__kmalloc+0x46/0x1b0
iio_device_register_eventset at drivers/iio/industrialio-event.c:541
__iio_device_register at drivers/iio/industrialio-core.c:1959
__devm_iio_device_register at drivers/iio/industrialio-core.c:2040 |
| Hugging Face Smolagents version 1.20.0 contains an XPath injection vulnerability in the search_item_ctrl_f function located in src/smolagents/vision_web_browser.py. The function constructs an XPath query by directly concatenating user-supplied input into the XPath expression without proper sanitization or escaping. This allows an attacker to inject malicious XPath syntax that can alter the intended query logic. The vulnerability enables attackers to bypass search filters, access unintended DOM elements, and disrupt web automation workflows. This can lead to information disclosure, manipulation of AI agent interactions, and compromise the reliability of automated web tasks. The issue is fixed in version 1.22.0. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix mt7915_rate_txpower_get() resource leaks
Coverity message: variable "buf" going out of scope leaks the storage.
Addresses-Coverity-ID: 1527799 ("Resource leaks") |
