| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: don't block sync for filesystems with no data integrity guarantees
Add a SB_I_NO_DATA_INTEGRITY superblock flag for filesystems that cannot
guarantee data persistence on sync (eg fuse). For superblocks with this
flag set, sync kicks off writeback of dirty inodes but does not wait
for the flusher threads to complete the writeback.
This replaces the per-inode AS_NO_DATA_INTEGRITY mapping flag added in
commit f9a49aa302a0 ("fs/writeback: skip AS_NO_DATA_INTEGRITY mappings
in wait_sb_inodes()"). The flag belongs at the superblock level because
data integrity is a filesystem-wide property, not a per-inode one.
Having this flag at the superblock level also allows us to skip having
to iterate every dirty inode in wait_sb_inodes() only to skip each inode
individually.
Prior to this commit, mappings with no data integrity guarantees skipped
waiting on writeback completion but still waited on the flusher threads
to finish initiating the writeback. Waiting on the flusher threads is
unnecessary. This commit kicks off writeback but does not wait on the
flusher threads. This change properly addresses a recent report [1] for
a suspend-to-RAM hang seen on fuse-overlayfs that was caused by waiting
on the flusher threads to finish:
Workqueue: pm_fs_sync pm_fs_sync_work_fn
Call Trace:
<TASK>
__schedule+0x457/0x1720
schedule+0x27/0xd0
wb_wait_for_completion+0x97/0xe0
sync_inodes_sb+0xf8/0x2e0
__iterate_supers+0xdc/0x160
ksys_sync+0x43/0xb0
pm_fs_sync_work_fn+0x17/0xa0
process_one_work+0x193/0x350
worker_thread+0x1a1/0x310
kthread+0xfc/0x240
ret_from_fork+0x243/0x280
ret_from_fork_asm+0x1a/0x30
</TASK>
On fuse this is problematic because there are paths that may cause the
flusher thread to block (eg if systemd freezes the user session cgroups
first, which freezes the fuse daemon, before invoking the kernel
suspend. The kernel suspend triggers ->write_node() which on fuse issues
a synchronous setattr request, which cannot be processed since the
daemon is frozen. Or if the daemon is buggy and cannot properly complete
writeback, initiating writeback on a dirty folio already under writeback
leads to writeback_get_folio() -> folio_prepare_writeback() ->
unconditional wait on writeback to finish, which will cause a hang).
This commit restores fuse to its prior behavior before tmp folios were
removed, where sync was essentially a no-op.
[1] https://lore.kernel.org/linux-fsdevel/CAJnrk1a-asuvfrbKXbEwwDSctvemF+6zfhdnuzO65Pt8HsFSRw@mail.gmail.com/T/#m632c4648e9cafc4239299887109ebd880ac6c5c1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: always keep track of remap prev/next
During 3D workload, user is reporting hitting:
[ 413.361679] WARNING: drivers/gpu/drm/xe/xe_vm.c:1217 at vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe], CPU#7: vkd3d_queue/9925
[ 413.361944] CPU: 7 UID: 1000 PID: 9925 Comm: vkd3d_queue Kdump: loaded Not tainted 7.0.0-070000rc3-generic #202603090038 PREEMPT(lazy)
[ 413.361949] RIP: 0010:vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe]
[ 413.362074] RSP: 0018:ffffd4c25c3df930 EFLAGS: 00010282
[ 413.362077] RAX: 0000000000000000 RBX: ffff8f3ee817ed10 RCX: 0000000000000000
[ 413.362078] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 413.362079] RBP: ffffd4c25c3df980 R08: 0000000000000000 R09: 0000000000000000
[ 413.362081] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8f41fbf99380
[ 413.362082] R13: ffff8f3ee817e968 R14: 00000000ffffffef R15: ffff8f43d00bd380
[ 413.362083] FS: 00000001040ff6c0(0000) GS:ffff8f4696d89000(0000) knlGS:00000000330b0000
[ 413.362085] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
[ 413.362086] CR2: 00007ddfc4747000 CR3: 00000002e6262005 CR4: 0000000000f72ef0
[ 413.362088] PKRU: 55555554
[ 413.362089] Call Trace:
[ 413.362092] <TASK>
[ 413.362096] xe_vm_bind_ioctl+0xa9a/0xc60 [xe]
Which seems to hint that the vma we are re-inserting for the ops unwind
is either invalid or overlapping with something already inserted in the
vm. It shouldn't be invalid since this is a re-insertion, so must have
worked before. Leaving the likely culprit as something already placed
where we want to insert the vma.
Following from that, for the case where we do something like a rebind in
the middle of a vma, and one or both mapped ends are already compatible,
we skip doing the rebind of those vma and set next/prev to NULL. As well
as then adjust the original unmap va range, to avoid unmapping the ends.
However, if we trigger the unwind path, we end up with three va, with
the two ends never being removed and the original va range in the middle
still being the shrunken size.
If this occurs, one failure mode is when another unwind op needs to
interact with that range, which can happen with a vector of binds. For
example, if we need to re-insert something in place of the original va.
In this case the va is still the shrunken version, so when removing it
and then doing a re-insert it can overlap with the ends, which were
never removed, triggering a warning like above, plus leaving the vm in a
bad state.
With that, we need two things here:
1) Stop nuking the prev/next tracking for the skip cases. Instead
relying on checking for skip prev/next, where needed. That way on the
unwind path, we now correctly remove both ends.
2) Undo the unmap va shrinkage, on the unwind path. With the two ends
now removed the unmap va should expand back to the original size again,
before re-insertion.
v2:
- Update the explanation in the commit message, based on an actual IGT of
triggering this issue, rather than conjecture.
- Also undo the unmap shrinkage, for the skip case. With the two ends
now removed, the original unmap va range should expand back to the
original range.
v3:
- Track the old start/range separately. vma_size/start() uses the va
info directly.
(cherry picked from commit aec6969f75afbf4e01fd5fb5850ed3e9c27043ac) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Do not skip unrelated mode changes in DSC validation
Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in
atomic check"), amdgpu resets the CRTC state mode_changed flag to false when
recomputing the DSC configuration results in no timing change for a particular
stream.
However, this is incorrect in scenarios where a change in MST/DSC configuration
happens in the same KMS commit as another (unrelated) mode change. For example,
the integrated panel of a laptop may be configured differently (e.g., HDR
enabled/disabled) depending on whether external screens are attached. In this
case, plugging in external DP-MST screens may result in the mode_changed flag
being dropped incorrectly for the integrated panel if its DSC configuration
did not change during precomputation in pre_validate_dsc().
At this point, however, dm_update_crtc_state() has already created new streams
for CRTCs with DSC-independent mode changes. In turn,
amdgpu_dm_commit_streams() will never release the old stream, resulting in a
memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to
the new stream either, which manifests as a use-after-free when the stream gets
disabled later on:
BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu]
Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977
Workqueue: events drm_mode_rmfb_work_fn
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
print_address_description.constprop.0+0x88/0x320
? dc_stream_release+0x25/0x90 [amdgpu]
print_report+0xfc/0x1ff
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x225/0x4e0
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_report+0xe1/0x180
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_check_range+0x125/0x200
dc_stream_release+0x25/0x90 [amdgpu]
dc_state_destruct+0x14d/0x5c0 [amdgpu]
dc_state_release.part.0+0x4e/0x130 [amdgpu]
dm_atomic_destroy_state+0x3f/0x70 [amdgpu]
drm_atomic_state_default_clear+0x8ee/0xf30
? drm_mode_object_put.part.0+0xb1/0x130
__drm_atomic_state_free+0x15c/0x2d0
atomic_remove_fb+0x67e/0x980
Since there is no reliable way of figuring out whether a CRTC has unrelated
mode changes pending at the time of DSC validation, remember the value of the
mode_changed flag from before the point where a CRTC was marked as potentially
affected by a change in DSC configuration. Reset the mode_changed flag to this
earlier value instead in pre_validate_dsc().
(cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b) |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: fix out-of-bounds writes in iavf_get_ethtool_stats()
iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the
value could change in runtime, we should use num_tx_queues instead.
Moreover iavf_get_ethtool_stats() uses num_active_queues while
iavf_get_sset_count() and iavf_get_stat_strings() use
real_num_tx_queues, which triggers out-of-bounds writes when we do
"ethtool -L" and "ethtool -S" simultaneously [1].
For example when we change channels from 1 to 8, Thread 3 could be
scheduled before Thread 2, and out-of-bounds writes could be triggered
in Thread 3:
Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S)
iavf_set_channels()
...
iavf_alloc_queues()
-> num_active_queues = 8
iavf_schedule_finish_config()
iavf_get_sset_count()
real_num_tx_queues: 1
-> buffer for 1 queue
iavf_get_ethtool_stats()
num_active_queues: 8
-> out-of-bounds!
iavf_finish_config()
-> real_num_tx_queues = 8
Use immutable num_tx_queues in all related functions to avoid the issue.
[1]
BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270
Write of size 8 at addr ffffc900031c9080 by task ethtool/5800
CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_report+0x170/0x4f3
kasan_report+0xe1/0x180
iavf_add_one_ethtool_stat+0x200/0x270
iavf_get_ethtool_stats+0x14c/0x2e0
__dev_ethtool+0x3d0c/0x5830
dev_ethtool+0x12d/0x270
dev_ioctl+0x53c/0xe30
sock_do_ioctl+0x1a9/0x270
sock_ioctl+0x3d4/0x5e0
__x64_sys_ioctl+0x137/0x1c0
do_syscall_64+0xf3/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7da0e6e36d
...
</TASK>
The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830
The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff88813a013de0 pfn:0x13a013
flags: 0x200000000000000(node=0|zone=2)
raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: Avoid releasing netdev before teardown completes
The patch cited in the Fixes tag below changed the teardown code for
OVS ports to no longer unconditionally take the RTNL. After this change,
the netdev_destroy() callback can proceed immediately to the call_rcu()
invocation if the IFF_OVS_DATAPATH flag is already cleared on the
netdev.
The ovs_netdev_detach_dev() function clears the flag before completing
the unregistration, and if it gets preempted after clearing the flag (as
can happen on an -rt kernel), netdev_destroy() can complete and the
device can be freed before the unregistration completes. This leads to a
splat like:
[ 998.393867] Oops: general protection fault, probably for non-canonical address 0xff00000001000239: 0000 [#1] SMP PTI
[ 998.393877] CPU: 42 UID: 0 PID: 55177 Comm: ip Kdump: loaded Not tainted 6.12.0-211.1.1.el10_2.x86_64+rt #1 PREEMPT_RT
[ 998.393886] Hardware name: Dell Inc. PowerEdge R740/0JMK61, BIOS 2.24.0 03/27/2025
[ 998.393889] RIP: 0010:dev_set_promiscuity+0x8d/0xa0
[ 998.393901] Code: 00 00 75 d8 48 8b 53 08 48 83 ba b0 02 00 00 00 75 ca 48 83 c4 08 5b c3 cc cc cc cc 48 83 bf 48 09 00 00 00 75 91 48 8b 47 08 <48> 83 b8 b0 02 00 00 00 74 97 eb 81 0f 1f 80 00 00 00 00 90 90 90
[ 998.393906] RSP: 0018:ffffce5864a5f6a0 EFLAGS: 00010246
[ 998.393912] RAX: ff00000000ffff89 RBX: ffff894d0adf5a05 RCX: 0000000000000000
[ 998.393917] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffff894d0adf5a05
[ 998.393921] RBP: ffff894d19252000 R08: ffff894d19252000 R09: 0000000000000000
[ 998.393924] R10: ffff894d19252000 R11: ffff894d192521b8 R12: 0000000000000006
[ 998.393927] R13: ffffce5864a5f738 R14: 00000000ffffffe2 R15: 0000000000000000
[ 998.393931] FS: 00007fad61971800(0000) GS:ffff894cc0140000(0000) knlGS:0000000000000000
[ 998.393936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 998.393940] CR2: 000055df0a2a6e40 CR3: 000000011c7fe003 CR4: 00000000007726f0
[ 998.393944] PKRU: 55555554
[ 998.393946] Call Trace:
[ 998.393949] <TASK>
[ 998.393952] ? show_trace_log_lvl+0x1b0/0x2f0
[ 998.393961] ? show_trace_log_lvl+0x1b0/0x2f0
[ 998.393975] ? dp_device_event+0x41/0x80 [openvswitch]
[ 998.394009] ? __die_body.cold+0x8/0x12
[ 998.394016] ? die_addr+0x3c/0x60
[ 998.394027] ? exc_general_protection+0x16d/0x390
[ 998.394042] ? asm_exc_general_protection+0x26/0x30
[ 998.394058] ? dev_set_promiscuity+0x8d/0xa0
[ 998.394066] ? ovs_netdev_detach_dev+0x3a/0x80 [openvswitch]
[ 998.394092] dp_device_event+0x41/0x80 [openvswitch]
[ 998.394102] notifier_call_chain+0x5a/0xd0
[ 998.394106] unregister_netdevice_many_notify+0x51b/0xa60
[ 998.394110] rtnl_dellink+0x169/0x3e0
[ 998.394121] ? rt_mutex_slowlock.constprop.0+0x95/0xd0
[ 998.394125] rtnetlink_rcv_msg+0x142/0x3f0
[ 998.394128] ? avc_has_perm_noaudit+0x69/0xf0
[ 998.394130] ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[ 998.394132] netlink_rcv_skb+0x50/0x100
[ 998.394138] netlink_unicast+0x292/0x3f0
[ 998.394141] netlink_sendmsg+0x21b/0x470
[ 998.394145] ____sys_sendmsg+0x39d/0x3d0
[ 998.394149] ___sys_sendmsg+0x9a/0xe0
[ 998.394156] __sys_sendmsg+0x7a/0xd0
[ 998.394160] do_syscall_64+0x7f/0x170
[ 998.394162] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 998.394165] RIP: 0033:0x7fad61bf4724
[ 998.394188] Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d c5 e9 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
[ 998.394189] RSP: 002b:00007ffd7e2f7cb8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 998.394191] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fad61bf4724
[ 998.394193] RDX: 0000000000000000 RSI: 00007ffd7e2f7d20 RDI: 0000000000000003
[ 998.394194] RBP: 00007ffd7e2f7d90 R08: 0000000000000010 R09: 000000000000003f
[ 998.394195] R10: 000055df11558010 R11: 0000000000000202 R12: 00007ffd7e2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false
A UAF issue occurs when the virtio_net driver is configured with napi_tx=N
and the device's IFF_XMIT_DST_RELEASE flag is cleared
(e.g., during the configuration of tc route filter rules).
When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack
expects the driver to hold the reference to skb->dst until the packet
is fully transmitted and freed. In virtio_net with napi_tx=N,
skbs may remain in the virtio transmit ring for an extended period.
If the network namespace is destroyed while these skbs are still pending,
the corresponding dst_ops structure has freed. When a subsequent packet
is transmitted, free_old_xmit() is triggered to clean up old skbs.
It then calls dst_release() on the skb associated with the stale dst_entry.
Since the dst_ops (referenced by the dst_entry) has already been freed,
a UAF kernel paging request occurs.
fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release
the dst reference before the skb is queued in virtio_net.
Call Trace:
Unable to handle kernel paging request at virtual address ffff80007e150000
CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT
...
percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)
dst_release+0xe0/0x110 net/core/dst.c:177
skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177
sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255
dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469
napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527
__free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]
free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]
start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]
...
Reproduction Steps:
NETDEV="enp3s0"
config_qdisc_route_filter() {
tc qdisc del dev $NETDEV root
tc qdisc add dev $NETDEV root handle 1: prio
tc filter add dev $NETDEV parent 1:0 \
protocol ip prio 100 route to 100 flowid 1:1
ip route add 192.168.1.100/32 dev $NETDEV realm 100
}
test_ns() {
ip netns add testns
ip link set $NETDEV netns testns
ip netns exec testns ifconfig $NETDEV 10.0.32.46/24
ip netns exec testns ping -c 1 10.0.32.1
ip netns del testns
}
config_qdisc_route_filter
test_ns
sleep 2
test_ns |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Initialize free_qp completion before using it
In irdma_create_qp, if ib_copy_to_udata fails, it will call
irdma_destroy_qp to clean up which will attempt to wait on
the free_qp completion, which is not initialized yet. Fix this
by initializing the completion before the ib_copy_to_udata call. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix leakage in __construct_region()
Failing the first sysfs_update_group() needs to explicitly
kfree the resource as it is too early for cxl_region_iomem_release()
to do so. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix possible wrong descriptor completion in llist_abort_desc()
At the end of this function, d is the traversal cursor of flist, but the
code completes found instead. This can lead to issues such as NULL pointer
dereferences, double completion, or descriptor leaks.
Fix this by completing d instead of found in the final
list_for_each_entry_safe() loop. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix memory leak when a wq is reset
idxd_wq_disable_cleanup() which is called from the reset path for a
workqueue, sets the wq type to NONE, which for other parts of the
driver mean that the wq is empty (all its resources were released).
Only set the wq type to NONE after its resources are released. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid infinite loops caused by residual data
On the mkdir/mknod path, when mapping logical blocks to physical blocks,
if inserting a new extent into the extent tree fails (in this example,
because the file system disabled the huge file feature when marking the
inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to
reclaim the physical block without deleting the corresponding data in
the extent tree. This causes subsequent mkdir operations to reference
the previously reclaimed physical block number again, even though this
physical block is already being used by the xattr block. Therefore, a
situation arises where both the directory and xattr are using the same
buffer head block in memory simultaneously.
The above causes ext4_xattr_block_set() to enter an infinite loop about
"inserted" and cannot release the inode lock, ultimately leading to the
143s blocking problem mentioned in [1].
If the metadata is corrupted, then trying to remove some extent space
can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE
was passed, remove space wrongly update quota information.
Jan Kara suggests distinguishing between two cases:
1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully
consistent and we must maintain its consistency including all the
accounting. However these errors can happen only early before we've
inserted the extent into the extent tree. So current code works correctly
for this case.
2) Some other error - this means metadata is corrupted. We should strive to
do as few modifications as possible to limit damage. So I'd just skip
freeing of allocated blocks.
[1]
INFO: task syz.0.17:5995 blocked for more than 143 seconds.
Call Trace:
inode_lock_nested include/linux/fs.h:1073 [inline]
__start_dirop fs/namei.c:2923 [inline]
start_dirop fs/namei.c:2934 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: stop reclaim before pushing AIL during unmount
The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while
background reclaim and inodegc are still running. This is broken
independently of any use-after-free issues - background reclaim and
inodegc should not be running while the AIL is being pushed during
unmount, as inodegc can dirty and insert inodes into the AIL during the
flush, and background reclaim can race to abort and free dirty inodes.
Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background
reclaim before pushing the AIL. Stop inodegc before cancelling
m_reclaim_work because the inodegc worker can re-queue m_reclaim_work
via xfs_inodegc_set_reclaimable. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: fix param_ctx leak on damon_sysfs_new_test_ctx() failure
Patch series "mm/damon/sysfs: fix memory leak and NULL dereference
issues", v4.
DAMON_SYSFS can leak memory under allocation failure, and do NULL pointer
dereference when a privileged user make wrong sequences of control. Fix
those.
This patch (of 3):
When damon_sysfs_new_test_ctx() fails in damon_sysfs_commit_input(),
param_ctx is leaked because the early return skips the cleanup at the out
label. Destroy param_ctx before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: check if ext_caps is valid in BL setup
LVDS connectors don't have extended backlight caps so check
if the pointer is valid before accessing it.
(cherry picked from commit 3f797396d7f4eb9bb6eded184bbc6f033628a6f6) |
| In the Linux kernel, the following vulnerability has been resolved:
spi: meson-spicc: Fix double-put in remove path
meson_spicc_probe() registers the controller with
devm_spi_register_controller(), so teardown already drops the
controller reference via devm cleanup.
Calling spi_controller_put() again in meson_spicc_remove()
causes a double-put. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: avoid memory leak in asus_report_fixup()
The asus_report_fixup() function was returning a newly allocated
kmemdup()-allocated buffer, but never freeing it. Switch to
devm_kzalloc() to ensure the memory is managed and freed automatically
when the device is removed.
The caller of report_fixup() does not take ownership of the returned
pointer, but it is permitted to return a pointer whose lifetime is at
least that of the input buffer.
Also fix a harmless out-of-bounds read by copying only the original
descriptor size. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skb: fix cross-cache free of KFENCE-allocated skb head
SKB_SMALL_HEAD_CACHE_SIZE is intentionally set to a non-power-of-2
value (e.g. 704 on x86_64) to avoid collisions with generic kmalloc
bucket sizes. This ensures that skb_kfree_head() can reliably use
skb_end_offset to distinguish skb heads allocated from
skb_small_head_cache vs. generic kmalloc caches.
However, when KFENCE is enabled, kfence_ksize() returns the exact
requested allocation size instead of the slab bucket size. If a caller
(e.g. bpf_test_init) allocates skb head data via kzalloc() and the
requested size happens to equal SKB_SMALL_HEAD_CACHE_SIZE, then
slab_build_skb() -> ksize() returns that exact value. After subtracting
skb_shared_info overhead, skb_end_offset ends up matching
SKB_SMALL_HEAD_HEADROOM, causing skb_kfree_head() to incorrectly free
the object to skb_small_head_cache instead of back to the original
kmalloc cache, resulting in a slab cross-cache free:
kmem_cache_free(skbuff_small_head): Wrong slab cache. Expected
skbuff_small_head but got kmalloc-1k
Fix this by always calling kfree(head) in skb_kfree_head(). This keeps
the free path generic and avoids allocator-specific misclassification
for KFENCE objects. |
| In the Linux kernel, the following vulnerability has been resolved:
X.509: Fix out-of-bounds access when parsing extensions
Leo reports an out-of-bounds access when parsing a certificate with
empty Basic Constraints or Key Usage extension because the first byte of
the extension is read before checking its length. Fix it.
The bug can be triggered by an unprivileged user by submitting a
specially crafted certificate to the kernel through the keyrings(7) API.
Leo has demonstrated this with a proof-of-concept program responsibly
disclosed off-list. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix OOB write in QUERY_INFO for compound requests
When a compound request such as READ + QUERY_INFO(Security) is received,
and the first command (READ) consumes most of the response buffer,
ksmbd could write beyond the allocated buffer while building a security
descriptor.
The root cause was that smb2_get_info_sec() checked buffer space using
ppntsd_size from xattr, while build_sec_desc() often synthesized a
significantly larger descriptor from POSIX ACLs.
This patch introduces smb_acl_sec_desc_scratch_len() to accurately
compute the final descriptor size beforehand, performs proper buffer
checking with smb2_calc_max_out_buf_len(), and uses exact-sized
allocation + iov pinning. |
