| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: ah6: validate routing header segments_left
AH6 rearranges routing-header addresses before computing or verifying the
ICV. ipv6_rearrange_rthdr() assumes that segments_left is not larger than
the number of addresses described by the routing header's hdrlen field.
That assumption does not hold for raw IPv6 HDRINCL packets. A packet with
hdrlen equal to 2 describes one address, but can carry an arbitrary
segments_left value. With segments_left equal to 255, the function moves
its address pointer 4,064 bytes backwards and passes a 4,064-byte length to
memmove(), resulting in an out-of-bounds access.
Validate the invariant locally before modifying the routing header or
performing any address-pointer arithmetic, and propagate malformed-header
errors to the existing AH6 input and output error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: espintcp: fix UAF during close
ZDI reported and analyzed a race condition during close for espintcp
sockets:
espintcp_close() frees emsg->skb via kfree_skb() without holding
any socket lock. Concurrently, the xfrm_trans_reinject work queue
invokes esp_output_tcp_finish() -> espintcp_push_skb() ->
espintcp_push_msgs() -> skb_send_sock_locked(), which reads the
same skb as a data source.
Fix this by adding a synchronize_rcu() call after resetting sk_prot,
since esp_output_tcp_finish() runs under RCU and won't use a socket
with sk_prot == &tcp_prot. Simply taking the socket lock in
espintcp_close() could lead to leaks, if esp_output_tcp_finish()
re-adds an skb in the slot we just freed. After this, the existing
barrier() is no longer needed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/tcp-ao: fix use-after-free of current_key on reconnect to another peer
tcp_inbound_ao_hash() is called before bh_lock_sock_nested() is taken,
with only rcu_read_lock() held. On the fast path for established
sockets, if the rnext_keyid sent by the peer differs from
current_key->sndid, the key the peer asked for is looked up and stored
in current_key. The lookup is inside the RCU read side, but current_key
outlives it.
When the socket is disconnected and connect() is called again for
another peer, tcp_ao_connect_init() unlinks every key that does not
match the new peer and frees it with call_rcu(). If current_key points
at such a key, it is cleared to NULL.
The fast path reads sk_state only once on entry, so a softirq that got
into it while the socket was still established can update current_key
after that loop has already run. The update is inside the RCU read side,
so it comes before the call_rcu() callback, and once the callback frees
the key, current_key is left pointing at freed memory.
The next transmission picks that pointer up in tcp_get_current_key().
tcp_ao_transmit_skb() then reads the traffic key from the freed object,
which is the use-after-free.
Wait for one grace period before unlinking, and only if a key is going
to be removed. By the time tcp_connect() runs the socket is already in
TCP_SYN_SENT, and TCP_AO_ESTABLISHED does not contain TCPF_SYN_SENT, so
a softirq entering after the wait cannot reach the fast path, and the
ones already in it have finished. The existing NULL handling in the loop
is then enough. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix invalidate lock leak on open O_TRUNC DAX failure
fuse_open() takes filemap_invalidate_lock() for a DAX truncate
(dax_truncate = true) and releases it before the out_inode_unlock
label. But when fuse_dax_break_layouts() fails, the goto
out_inode_unlock skips the unlock and leaks the rwsem, so any later
fault or truncate on the file stalls on the stale lock.
fuse_dax_break_layouts() can fail with -ERESTARTSYS when a signal
interrupts the wait for busy DAX pages to drain:
open("file", O_RDWR | O_TRUNC)
└─ fuse_open()
├─ filemap_invalidate_lock() # dax_truncate
└─ fuse_dax_break_layouts()
└─ dax_break_layout()
└─ wait_page_idle() # TASK_INTERRUPTIBLE
└─ fuse_wait_dax_page() # unlock, schedule, re-lock
└─ signal → -ERESTARTSYS
goto out_inode_unlock # <- lock leaked
Fix this by moving filemap_invalidate_unlock() below the label so
that all error paths release the lock, and rename the label to
out_unlock as it now covers more than just the inode lock. |
| Improper caching of the original content type in Spring Cloud Stream Avro.
Spring Cloud Stream 5.0.0 - 5.0.2
Spring Cloud Stream 4.3.0 - 4.3.3
Spring Cloud Stream 4.2.0 - 4.2.6 |
| Partition interceptor may be improperly added while sending message.
Spring Cloud Stream 5.0.0 - 5.0.2
Spring Cloud Stream 4.3.0 - 4.3.3
Spring Cloud Stream 4.2.0 - 4.2.6 |
| Potential for deserialization of untrusted types in Spring Cloud Stream.
Spring Cloud Stream 5.0.0 - 5.0.2
Spring Cloud Stream 4.3.0 - 4.3.3
Spring Cloud Stream 4.2.0 - 4.2.6 |
| A flaw was found in libssh. Incorrect AES-GCM finalization checks in builds using the OpenSSL backend can effectively remove integrity protection, allowing an in-path attacker to modify plaintext on the wire without detection. |
| DeadLetterPublishingRecovererFactory reads the retry_topic-original-timestamp header from an inbound ConsumerRecord and passes its raw bytes directly to new BigInteger(header.value()) with no length or format validation.
Spring for Apache Kafka 4.1.0
Spring for Apache Kafka 4.0.0 - 4.0.6
Spring for Apache Kafka 3.0.0 - 3.3.16
Spring for Apache Kafka 2.9.0 - 2.9.14
Spring for Apache Kafka 2.8.12 and earlier |
| Potential for logging sensitive data in Spring Cloud Function Azure.
Spring Cloud Function 5.0.0 - 5.0.3
Spring Cloud Function 4.3.0 - 4.3.4
Spring Cloud Function 4.2.0 - 4.2.7 |
| Spring Data Relational does not properly escape binding values of externally-controlled input when using StringMatcher (STARTING, ENDING, or CONTAINING) in Query By Example (QBE). An attacker can supply wildcard characters to perform boolean-based blind data inference.
Affected versions:
Spring Data Relational/JDBC/R2DBC 4.0.0 through 4.0.5; 3.5.0 through 3.5.11; 3.4.0 through 3.4.14; 3.3.0 through 3.3.16; 3.2.0 through 3.2.15; 3.1.0 through 3.1.14; 3.0.0 through 3.0.15; 2.4.0 through 2.4.19. |
| Improper neutralization of special elements used in a template engine in the CDK generator in Amazon awslabs.dynamodb-mcp-server before 2.1.6 might allow a context-dependent actor to execute arbitrary code on the host that deploys the generated application via crafted table, index, or attribute names in a data model file. |
| The Grav Form plugin (getgrav/grav-plugin-form) versions 8.0.6 through 9.1.19 select the reCAPTCHA version to validate based solely on which response field key is present in the submitted payload. On a site configured for reCAPTCHA v3, an anonymous attacker can place their v3 token under the v2 field name (g-recaptcha-response instead of token), causing validation to use the v2 branch, which never applies the score threshold or verifies the expected action. This results in a complete bypass of reCAPTCHA v3 bot protection. The issue is fixed in version 9.1.20. |
| AVideo through commit c91b5975d contains a reflected cross-site scripting vulnerability in userLogin.php that allows unauthenticated attackers to inject arbitrary JavaScript by closing the script tag with </script>. Attackers can craft a malicious URL with an error parameter containing script breakout sequences to execute arbitrary JavaScript in the victim's browser context on the login page. |
| FreeIPMI before 1.6.19 has a stack-based buffer overflow in _read_fru_data in libfreeipmi/fru/ipmi-fru.c when a BMC returns more bytes than requested. |
| MOOS ui-moos through 50b9c6c contains a buffer overflow vulnerability in ScopeTabPane.cpp and ScopeGrid.cpp where client and variable names are formatted into fixed 1024-byte buffers using sprintf without length validation. Attackers can supply arbitrarily long MOOS identifiers that overflow the buffers when an operator selects process list entries or pokes variables, enabling code execution. |
| A vulnerability was found in Eleveo Quality Management 9.7.0. This issue affects some unknown processing of the file /enc-fwk-data/api/v3/conversations/<ID>/events of the component Conversation Handler. The manipulation of the argument labels results in denial of service. The attack can be executed remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in Dolibarr up to 21.0.4/22.0.5/23.0.3. Affected by this issue is some unknown functionality of the file htdocs/core/filemanagerdol/connectors/php/config.inc.php of the component Legacy File Manager. Executing a manipulation can lead to improper access controls. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 23.0.4 can resolve this issue. This patch is called ef6631e9bd5ec4b8cec0e88f1796d3d10dad02ec. It is suggested to upgrade the affected component. |
| A vulnerability was detected in light0011 cms c774dce31c6df0055568a8d5c53d964d99be199d/f72cf46f601efb2a0618c3814cc2f61380b38930. Impacted is the function htmlspecialchars_decode of the file App/Home/View/Default/Chapter/oneChapter.tpl of the component Chapter Content Output. Performing a manipulation of the argument content results in cross site scripting. Remote exploitation of the attack is possible. The exploit is now public and may be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The project was informed of the problem early through an issue report but has not responded yet. |
| A weakness has been identified in SpecterOps BloodHound up to 9.5.1. The affected element is the function NewV2API of the file cmd/api/src/api/registration/v2.go of the component Graph Write Endpoint. Executing a manipulation can lead to improper authorization. It is possible to launch the attack remotely. Upgrading to version 9.6.0-rc1, 9.6.0 and 9.7.0-rc3 is sufficient to fix this issue. This patch is called 39d1276a63e95a7713f954dea632a19651d9cebb. You should upgrade the affected component. |
