| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
clk: samsung: Fix memory leak in _samsung_clk_register_pll()
If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: do not update mtu if msg_max is too small in mtu negotiation
When doing link mtu negotiation, a malicious peer may send Activate msg
with a very small mtu, e.g. 4 in Shuang's testing, without checking for
the minimum mtu, l->mtu will be set to 4 in tipc_link_proto_rcv(), then
n->links[bearer_id].mtu is set to 4294967228, which is a overflow of
'4 - INT_H_SIZE - EMSG_OVERHEAD' in tipc_link_mss().
With tipc_link.mtu = 4, tipc_link_xmit() kept printing the warning:
tipc: Too large msg, purging xmit list 1 5 0 40 4!
tipc: Too large msg, purging xmit list 1 15 0 60 4!
And with tipc_link_entry.mtu 4294967228, a huge skb was allocated in
named_distribute(), and when purging it in tipc_link_xmit(), a crash
was even caused:
general protection fault, probably for non-canonical address 0x2100001011000dd: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.3.0.neta #19
RIP: 0010:kfree_skb_list_reason+0x7e/0x1f0
Call Trace:
<IRQ>
skb_release_data+0xf9/0x1d0
kfree_skb_reason+0x40/0x100
tipc_link_xmit+0x57a/0x740 [tipc]
tipc_node_xmit+0x16c/0x5c0 [tipc]
tipc_named_node_up+0x27f/0x2c0 [tipc]
tipc_node_write_unlock+0x149/0x170 [tipc]
tipc_rcv+0x608/0x740 [tipc]
tipc_udp_recv+0xdc/0x1f0 [tipc]
udp_queue_rcv_one_skb+0x33e/0x620
udp_unicast_rcv_skb.isra.72+0x75/0x90
__udp4_lib_rcv+0x56d/0xc20
ip_protocol_deliver_rcu+0x100/0x2d0
This patch fixes it by checking the new mtu against tipc_bearer_min_mtu(),
and not updating mtu if it is too small. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-mem2mem: add lock to protect parameter num_rdy
Getting below error when using KCSAN to check the driver. Adding lock to
protect parameter num_rdy when getting the value with function:
v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready.
kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queue
kworker/u16:3: [name:report&]
kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7:
kworker/u16:3: v4l2_m2m_buf_queue+0xd8/0x10c |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: pcie: Fix integer overflow in iwl_write_to_user_buf
An integer overflow occurs in the iwl_write_to_user_buf() function,
which is called by the iwl_dbgfs_monitor_data_read() function.
static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count,
void *buf, ssize_t *size,
ssize_t *bytes_copied)
{
int buf_size_left = count - *bytes_copied;
buf_size_left = buf_size_left - (buf_size_left % sizeof(u32));
if (*size > buf_size_left)
*size = buf_size_left;
If the user passes a SIZE_MAX value to the "ssize_t count" parameter,
the ssize_t count parameter is assigned to "int buf_size_left".
Then compare "*size" with "buf_size_left" . Here, "buf_size_left" is a
negative number, so "*size" is assigned "buf_size_left" and goes into
the third argument of the copy_to_user function, causing a heap overflow.
This is not a security vulnerability because iwl_dbgfs_monitor_data_read()
is a debugfs operation with 0400 privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
qed: allow sleep in qed_mcp_trace_dump()
By default, qed_mcp_cmd_and_union() delays 10us at a time in a loop
that can run 500K times, so calls to qed_mcp_nvm_rd_cmd()
may block the current thread for over 5s.
We observed thread scheduling delays over 700ms in production,
with stacktraces pointing to this code as the culprit.
qed_mcp_trace_dump() is called from ethtool, so sleeping is permitted.
It already can sleep in qed_mcp_halt(), which calls qed_mcp_cmd().
Add a "can sleep" parameter to qed_find_nvram_image() and
qed_nvram_read() so they can sleep during qed_mcp_trace_dump().
qed_mcp_trace_get_meta_info() and qed_mcp_trace_read_meta(),
called only by qed_mcp_trace_dump(), allow these functions to sleep.
I can't tell if the other caller (qed_grc_dump_mcp_hw_dump()) can sleep,
so keep b_can_sleep set to false when it calls these functions.
An example stacktrace from a custom warning we added to the kernel
showing a thread that has not scheduled despite long needing resched:
[ 2745.362925,17] ------------[ cut here ]------------
[ 2745.362941,17] WARNING: CPU: 23 PID: 5640 at arch/x86/kernel/irq.c:233 do_IRQ+0x15e/0x1a0()
[ 2745.362946,17] Thread not rescheduled for 744 ms after irq 99
[ 2745.362956,17] Modules linked in: ...
[ 2745.363339,17] CPU: 23 PID: 5640 Comm: lldpd Tainted: P O 4.4.182+ #202104120910+6d1da174272d.61x
[ 2745.363343,17] Hardware name: FOXCONN MercuryB/Quicksilver Controller, BIOS H11P1N09 07/08/2020
[ 2745.363346,17] 0000000000000000 ffff885ec07c3ed8 ffffffff8131eb2f ffff885ec07c3f20
[ 2745.363358,17] ffffffff81d14f64 ffff885ec07c3f10 ffffffff81072ac2 ffff88be98ed0000
[ 2745.363369,17] 0000000000000063 0000000000000174 0000000000000074 0000000000000000
[ 2745.363379,17] Call Trace:
[ 2745.363382,17] <IRQ> [<ffffffff8131eb2f>] dump_stack+0x8e/0xcf
[ 2745.363393,17] [<ffffffff81072ac2>] warn_slowpath_common+0x82/0xc0
[ 2745.363398,17] [<ffffffff81072b4c>] warn_slowpath_fmt+0x4c/0x50
[ 2745.363404,17] [<ffffffff810d5a8e>] ? rcu_irq_exit+0xae/0xc0
[ 2745.363408,17] [<ffffffff817c99fe>] do_IRQ+0x15e/0x1a0
[ 2745.363413,17] [<ffffffff817c7ac9>] common_interrupt+0x89/0x89
[ 2745.363416,17] <EOI> [<ffffffff8132aa74>] ? delay_tsc+0x24/0x50
[ 2745.363425,17] [<ffffffff8132aa04>] __udelay+0x34/0x40
[ 2745.363457,17] [<ffffffffa04d45ff>] qed_mcp_cmd_and_union+0x36f/0x7d0 [qed]
[ 2745.363473,17] [<ffffffffa04d5ced>] qed_mcp_nvm_rd_cmd+0x4d/0x90 [qed]
[ 2745.363490,17] [<ffffffffa04e1dc7>] qed_mcp_trace_dump+0x4a7/0x630 [qed]
[ 2745.363504,17] [<ffffffffa04e2556>] ? qed_fw_asserts_dump+0x1d6/0x1f0 [qed]
[ 2745.363520,17] [<ffffffffa04e4ea7>] qed_dbg_mcp_trace_get_dump_buf_size+0x37/0x80 [qed]
[ 2745.363536,17] [<ffffffffa04ea881>] qed_dbg_feature_size+0x61/0xa0 [qed]
[ 2745.363551,17] [<ffffffffa04eb427>] qed_dbg_all_data_size+0x247/0x260 [qed]
[ 2745.363560,17] [<ffffffffa0482c10>] qede_get_regs_len+0x30/0x40 [qede]
[ 2745.363566,17] [<ffffffff816c9783>] ethtool_get_drvinfo+0xe3/0x190
[ 2745.363570,17] [<ffffffff816cc152>] dev_ethtool+0x1362/0x2140
[ 2745.363575,17] [<ffffffff8109bcc6>] ? finish_task_switch+0x76/0x260
[ 2745.363580,17] [<ffffffff817c2116>] ? __schedule+0x3c6/0x9d0
[ 2745.363585,17] [<ffffffff810dbd50>] ? hrtimer_start_range_ns+0x1d0/0x370
[ 2745.363589,17] [<ffffffff816c1e5b>] ? dev_get_by_name_rcu+0x6b/0x90
[ 2745.363594,17] [<ffffffff816de6a8>] dev_ioctl+0xe8/0x710
[ 2745.363599,17] [<ffffffff816a58a8>] sock_do_ioctl+0x48/0x60
[ 2745.363603,17] [<ffffffff816a5d87>] sock_ioctl+0x1c7/0x280
[ 2745.363608,17] [<ffffffff8111f393>] ? seccomp_phase1+0x83/0x220
[ 2745.363612,17] [<ffffffff811e3503>] do_vfs_ioctl+0x2b3/0x4e0
[ 2745.363616,17] [<ffffffff811e3771>] SyS_ioctl+0x41/0x70
[ 2745.363619,17] [<ffffffff817c6ffe>] entry_SYSCALL_64_fastpath+0x1e/0x79
[ 2745.363622,17] ---[ end trace f6954aa440266421 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: fix poll request timeout handling
When doing io_uring benchmark on /dev/nullb0, it's easy to crash the
kernel if poll requests timeout triggered, as reported by David. [1]
BUG: kernel NULL pointer dereference, address: 0000000000000008
Workqueue: kblockd blk_mq_timeout_work
RIP: 0010:null_timeout_rq+0x4e/0x91
Call Trace:
? null_timeout_rq+0x4e/0x91
blk_mq_handle_expired+0x31/0x4b
bt_iter+0x68/0x84
? bt_tags_iter+0x81/0x81
__sbitmap_for_each_set.constprop.0+0xb0/0xf2
? __blk_mq_complete_request_remote+0xf/0xf
bt_for_each+0x46/0x64
? __blk_mq_complete_request_remote+0xf/0xf
? percpu_ref_get_many+0xc/0x2a
blk_mq_queue_tag_busy_iter+0x14d/0x18e
blk_mq_timeout_work+0x95/0x127
process_one_work+0x185/0x263
worker_thread+0x1b5/0x227
This is indeed a race problem between null_timeout_rq() and null_poll().
null_poll() null_timeout_rq()
spin_lock(&nq->poll_lock)
list_splice_init(&nq->poll_list, &list)
spin_unlock(&nq->poll_lock)
while (!list_empty(&list))
req = list_first_entry()
list_del_init()
...
blk_mq_add_to_batch()
// req->rq_next = NULL
spin_lock(&nq->poll_lock)
// rq->queuelist->next == NULL
list_del_init(&rq->queuelist)
spin_unlock(&nq->poll_lock)
Fix these problems by setting requests state to MQ_RQ_COMPLETE under
nq->poll_lock protection, in which null_timeout_rq() can safely detect
this race and early return.
Note this patch just fix the kernel panic when request timeout happen.
[1] https://lore.kernel.org/all/3893581.1691785261@warthog.procyon.org.uk/ |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Fix memory leak of device names
The device names allocated by dev_set_name() need be freed
before module unloading, but they can not be freed because
the kobject's refcount which was set in device_initialize()
has not be decreased to 0.
As comment of device_add() says, if it fails, use only
put_device() drop the refcount, then the name will be
freed in kobejct_cleanup().
device_del() and put_device() can be replaced with
device_unregister(), so call it to unregister the added
successfully devices, and just call put_device() to the
not added device.
Add a release() function to device to avoid null release()
function WARNING in device_release(), it's empty, because
the context devices are freed together in
host1x_memory_context_list_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
IB/hfi1: Fix possible panic during hotplug remove
During hotplug remove it is possible that the update counters work
might be pending, and may run after memory has been freed.
Cancel the update counters work before freeing memory. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: vpe-mt: fix possible memory leak while module exiting
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
it need be freed when module exiting, call put_device() to give up
reference, so that it can be freed in kobject_cleanup() when the
refcount hit to 0. The vpe_device is static, so remove kfree() from
vpe_device_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
libbpf: Use elf_getshdrnum() instead of e_shnum
This commit replace e_shnum with the elf_getshdrnum() helper to fix two
oss-fuzz-reported heap-buffer overflow in __bpf_object__open. Both
reports are incorrectly marked as fixed and while still being
reproducible in the latest libbpf.
# clusterfuzz-testcase-minimized-bpf-object-fuzzer-5747922482888704
libbpf: loading object 'fuzz-object' from buffer
libbpf: sec_cnt is 0
libbpf: elf: section(1) .data, size 0, link 538976288, flags 2020202020202020, type=2
libbpf: elf: section(2) .data, size 32, link 538976288, flags 202020202020ff20, type=1
=================================================================
==13==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6020000000c0 at pc 0x0000005a7b46 bp 0x7ffd12214af0 sp 0x7ffd12214ae8
WRITE of size 4 at 0x6020000000c0 thread T0
SCARINESS: 46 (4-byte-write-heap-buffer-overflow-far-from-bounds)
#0 0x5a7b45 in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3414:24
#1 0x5733c0 in bpf_object_open /src/libbpf/src/libbpf.c:7223:16
#2 0x5739fd in bpf_object__open_mem /src/libbpf/src/libbpf.c:7263:20
...
The issue lie in libbpf's direct use of e_shnum field in ELF header as
the section header count. Where as libelf implemented an extra logic
that, when e_shnum == 0 && e_shoff != 0, will use sh_size member of the
initial section header as the real section header count (part of ELF
spec to accommodate situation where section header counter is larger
than SHN_LORESERVE).
The above inconsistency lead to libbpf writing into a zero-entry calloc
area. So intead of using e_shnum directly, use the elf_getshdrnum()
helper provided by libelf to retrieve the section header counter into
sec_cnt. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix a use-after-free in nouveau_gem_prime_import_sg_table()
nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code
back to the caller. On failures, ttm will call nouveau_bo_del_ttm() and
free the memory.Thus, when nouveau_bo_init() returns an error, the gem
object has already been released. Then the call to nouveau_bo_ref() will
use the freed "nvbo->bo" and lead to a use-after-free bug.
We should delete the call to nouveau_bo_ref() to avoid the use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix fget leak when fs don't support nowait buffered read
Heming reported a BUG when using io_uring doing link-cp on ocfs2. [1]
Do the following steps can reproduce this BUG:
mount -t ocfs2 /dev/vdc /mnt/ocfs2
cp testfile /mnt/ocfs2/
./link-cp /mnt/ocfs2/testfile /mnt/ocfs2/testfile.1
umount /mnt/ocfs2
Then umount will fail, and it outputs:
umount: /mnt/ocfs2: target is busy.
While tracing umount, it blames mnt_get_count() not return as expected.
Do a deep investigation for fget()/fput() on related code flow, I've
finally found that fget() leaks since ocfs2 doesn't support nowait
buffered read.
io_issue_sqe
|-io_assign_file // do fget() first
|-io_read
|-io_iter_do_read
|-ocfs2_file_read_iter // return -EOPNOTSUPP
|-kiocb_done
|-io_rw_done
|-__io_complete_rw_common // set REQ_F_REISSUE
|-io_resubmit_prep
|-io_req_prep_async // override req->file, leak happens
This was introduced by commit a196c78b5443 in v5.18. Fix it by don't
re-assign req->file if it has already been assigned.
[1] https://lore.kernel.org/ocfs2-devel/ab580a75-91c8-d68a-3455-40361be1bfa8@linux.alibaba.com/T/#t |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix disconnect vs accept race
Despite commit 0ad529d9fd2b ("mptcp: fix possible divide by zero in
recvmsg()"), the mptcp protocol is still prone to a race between
disconnect() (or shutdown) and accept.
The root cause is that the mentioned commit checks the msk-level
flag, but mptcp_stream_accept() does acquire the msk-level lock,
as it can rely directly on the first subflow lock.
As reported by Christoph than can lead to a race where an msk
socket is accepted after that mptcp_subflow_queue_clean() releases
the listener socket lock and just before it takes destructive
actions leading to the following splat:
BUG: kernel NULL pointer dereference, address: 0000000000000012
PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330
Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89
RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300
RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896a
RBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020
R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880
FS: 00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
do_accept+0x1ae/0x260 net/socket.c:1872
__sys_accept4+0x9b/0x110 net/socket.c:1913
__do_sys_accept4 net/socket.c:1954 [inline]
__se_sys_accept4 net/socket.c:1951 [inline]
__x64_sys_accept4+0x20/0x30 net/socket.c:1951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Address the issue by temporary removing the pending request socket
from the accept queue, so that racing accept() can't touch them.
After depleting the msk - the ssk still exists, as plain TCP sockets,
re-insert them into the accept queue, so that later inet_csk_listen_stop()
will complete the tcp socket disposal. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_usbpd_notify: Fix error handling in cros_usbpd_notify_init()
The following WARNING message was given when rmmod cros_usbpd_notify:
Unexpected driver unregister!
WARNING: CPU: 0 PID: 253 at drivers/base/driver.c:270 driver_unregister+0x8a/0xb0
Modules linked in: cros_usbpd_notify(-)
CPU: 0 PID: 253 Comm: rmmod Not tainted 6.1.0-rc3 #24
...
Call Trace:
<TASK>
cros_usbpd_notify_exit+0x11/0x1e [cros_usbpd_notify]
__x64_sys_delete_module+0x3c7/0x570
? __ia32_sys_delete_module+0x570/0x570
? lock_is_held_type+0xe3/0x140
? syscall_enter_from_user_mode+0x17/0x50
? rcu_read_lock_sched_held+0xa0/0xd0
? syscall_enter_from_user_mode+0x1c/0x50
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f333fe9b1b7
The reason is that the cros_usbpd_notify_init() does not check the return
value of platform_driver_register(), and the cros_usbpd_notify can
install successfully even if platform_driver_register() failed.
Fix by checking the return value of platform_driver_register() and
unregister cros_usbpd_notify_plat_driver when it failed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: do not ignore genmask when looking up chain by id
When adding a rule to a chain referring to its ID, if that chain had been
deleted on the same batch, the rule might end up referring to a deleted
chain.
This will lead to a WARNING like following:
[ 33.098431] ------------[ cut here ]------------
[ 33.098678] WARNING: CPU: 5 PID: 69 at net/netfilter/nf_tables_api.c:2037 nf_tables_chain_destroy+0x23d/0x260
[ 33.099217] Modules linked in:
[ 33.099388] CPU: 5 PID: 69 Comm: kworker/5:1 Not tainted 6.4.0+ #409
[ 33.099726] Workqueue: events nf_tables_trans_destroy_work
[ 33.100018] RIP: 0010:nf_tables_chain_destroy+0x23d/0x260
[ 33.100306] Code: 8b 7c 24 68 e8 64 9c ed fe 4c 89 e7 e8 5c 9c ed fe 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 c3 cc cc cc cc <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7
[ 33.101271] RSP: 0018:ffffc900004ffc48 EFLAGS: 00010202
[ 33.101546] RAX: 0000000000000001 RBX: ffff888006fc0a28 RCX: 0000000000000000
[ 33.101920] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 33.102649] RBP: ffffc900004ffc78 R08: 0000000000000000 R09: 0000000000000000
[ 33.103018] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880135ef500
[ 33.103385] R13: 0000000000000000 R14: dead000000000122 R15: ffff888006fc0a10
[ 33.103762] FS: 0000000000000000(0000) GS:ffff888024c80000(0000) knlGS:0000000000000000
[ 33.104184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 33.104493] CR2: 00007fe863b56a50 CR3: 00000000124b0001 CR4: 0000000000770ee0
[ 33.104872] PKRU: 55555554
[ 33.104999] Call Trace:
[ 33.105113] <TASK>
[ 33.105214] ? show_regs+0x72/0x90
[ 33.105371] ? __warn+0xa5/0x210
[ 33.105520] ? nf_tables_chain_destroy+0x23d/0x260
[ 33.105732] ? report_bug+0x1f2/0x200
[ 33.105902] ? handle_bug+0x46/0x90
[ 33.106546] ? exc_invalid_op+0x19/0x50
[ 33.106762] ? asm_exc_invalid_op+0x1b/0x20
[ 33.106995] ? nf_tables_chain_destroy+0x23d/0x260
[ 33.107249] ? nf_tables_chain_destroy+0x30/0x260
[ 33.107506] nf_tables_trans_destroy_work+0x669/0x680
[ 33.107782] ? mark_held_locks+0x28/0xa0
[ 33.107996] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10
[ 33.108294] ? _raw_spin_unlock_irq+0x28/0x70
[ 33.108538] process_one_work+0x68c/0xb70
[ 33.108755] ? lock_acquire+0x17f/0x420
[ 33.108977] ? __pfx_process_one_work+0x10/0x10
[ 33.109218] ? do_raw_spin_lock+0x128/0x1d0
[ 33.109435] ? _raw_spin_lock_irq+0x71/0x80
[ 33.109634] worker_thread+0x2bd/0x700
[ 33.109817] ? __pfx_worker_thread+0x10/0x10
[ 33.110254] kthread+0x18b/0x1d0
[ 33.110410] ? __pfx_kthread+0x10/0x10
[ 33.110581] ret_from_fork+0x29/0x50
[ 33.110757] </TASK>
[ 33.110866] irq event stamp: 1651
[ 33.111017] hardirqs last enabled at (1659): [<ffffffffa206a209>] __up_console_sem+0x79/0xa0
[ 33.111379] hardirqs last disabled at (1666): [<ffffffffa206a1ee>] __up_console_sem+0x5e/0xa0
[ 33.111740] softirqs last enabled at (1616): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0
[ 33.112094] softirqs last disabled at (1367): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0
[ 33.112453] ---[ end trace 0000000000000000 ]---
This is due to the nft_chain_lookup_byid ignoring the genmask. After this
change, adding the new rule will fail as it will not find the chain. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix resolving backrefs for inline extent followed by prealloc
If a file consists of an inline extent followed by a regular or prealloc
extent, then a legitimate attempt to resolve a logical address in the
non-inline region will result in add_all_parents reading the invalid
offset field of the inline extent. If the inline extent item is placed
in the leaf eb s.t. it is the first item, attempting to access the
offset field will not only be meaningless, it will go past the end of
the eb and cause this panic:
[17.626048] BTRFS warning (device dm-2): bad eb member end: ptr 0x3fd4 start 30834688 member offset 16377 size 8
[17.631693] general protection fault, probably for non-canonical address 0x5088000000000: 0000 [#1] SMP PTI
[17.635041] CPU: 2 PID: 1267 Comm: btrfs Not tainted 5.12.0-07246-g75175d5adc74-dirty #199
[17.637969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[17.641995] RIP: 0010:btrfs_get_64+0xe7/0x110
[17.649890] RSP: 0018:ffffc90001f73a08 EFLAGS: 00010202
[17.651652] RAX: 0000000000000001 RBX: ffff88810c42d000 RCX: 0000000000000000
[17.653921] RDX: 0005088000000000 RSI: ffffc90001f73a0f RDI: 0000000000000001
[17.656174] RBP: 0000000000000ff9 R08: 0000000000000007 R09: c0000000fffeffff
[17.658441] R10: ffffc90001f73790 R11: ffffc90001f73788 R12: ffff888106afe918
[17.661070] R13: 0000000000003fd4 R14: 0000000000003f6f R15: cdcdcdcdcdcdcdcd
[17.663617] FS: 00007f64e7627d80(0000) GS:ffff888237c80000(0000) knlGS:0000000000000000
[17.666525] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[17.668664] CR2: 000055d4a39152e8 CR3: 000000010c596002 CR4: 0000000000770ee0
[17.671253] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[17.673634] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[17.676034] PKRU: 55555554
[17.677004] Call Trace:
[17.677877] add_all_parents+0x276/0x480
[17.679325] find_parent_nodes+0xfae/0x1590
[17.680771] btrfs_find_all_leafs+0x5e/0xa0
[17.682217] iterate_extent_inodes+0xce/0x260
[17.683809] ? btrfs_inode_flags_to_xflags+0x50/0x50
[17.685597] ? iterate_inodes_from_logical+0xa1/0xd0
[17.687404] iterate_inodes_from_logical+0xa1/0xd0
[17.689121] ? btrfs_inode_flags_to_xflags+0x50/0x50
[17.691010] btrfs_ioctl_logical_to_ino+0x131/0x190
[17.692946] btrfs_ioctl+0x104a/0x2f60
[17.694384] ? selinux_file_ioctl+0x182/0x220
[17.695995] ? __x64_sys_ioctl+0x84/0xc0
[17.697394] __x64_sys_ioctl+0x84/0xc0
[17.698697] do_syscall_64+0x33/0x40
[17.700017] entry_SYSCALL_64_after_hwframe+0x44/0xae
[17.701753] RIP: 0033:0x7f64e72761b7
[17.709355] RSP: 002b:00007ffefb067f58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[17.712088] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f64e72761b7
[17.714667] RDX: 00007ffefb067fb0 RSI: 00000000c0389424 RDI: 0000000000000003
[17.717386] RBP: 00007ffefb06d188 R08: 000055d4a390d2b0 R09: 00007f64e7340a60
[17.719938] R10: 0000000000000231 R11: 0000000000000246 R12: 0000000000000001
[17.722383] R13: 0000000000000000 R14: 00000000c0389424 R15: 000055d4a38fd2a0
[17.724839] Modules linked in:
Fix the bug by detecting the inline extent item in add_all_parents and
skipping to the next extent item. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix xid leak in cifs_flock()
If not flock, before return -ENOLCK, should free the xid,
otherwise, the xid will be leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()
Fix a NULL pointer crash that occurs when we are freeing the socket at the
same time we access it via sysfs.
The problem is that:
1. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() take
the frwd_lock and do sock_hold() then drop the frwd_lock. sock_hold()
does a get on the "struct sock".
2. iscsi_sw_tcp_release_conn() does sockfd_put() which does the last put
on the "struct socket" and that does __sock_release() which sets the
sock->ops to NULL.
3. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() then
call kernel_getpeername() which accesses the NULL sock->ops.
Above we do a get on the "struct sock", but we needed a get on the "struct
socket". Originally, we just held the frwd_lock the entire time but in
commit bcf3a2953d36 ("scsi: iscsi: iscsi_tcp: Avoid holding spinlock while
calling getpeername()") we switched to refcount based because the network
layer changed and started taking a mutex in that path, so we could no
longer hold the frwd_lock.
Instead of trying to maintain multiple refcounts, this just has us use a
mutex for accessing the socket in the interface code paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: cake: fix null pointer access issue when cake_init() fails
When the default qdisc is cake, if the qdisc of dev_queue fails to be
inited during mqprio_init(), cake_reset() is invoked to clear
resources. In this case, the tins is NULL, and it will cause gpf issue.
The process is as follows:
qdisc_create_dflt()
cake_init()
q->tins = kvcalloc(...) --->failed, q->tins is NULL
...
qdisc_put()
...
cake_reset()
...
cake_dequeue_one()
b = &q->tins[...] --->q->tins is NULL
The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:cake_dequeue_one+0xc9/0x3c0
Call Trace:
<TASK>
cake_reset+0xb1/0x140
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f89e5122d04
</TASK> |
| In Splunk Enterprise versions below 9.4.4, 9.3.6, and 9.2.8, and Splunk Cloud Platform versions below 9.3.2411.111, 9.3.2408.119, and 9.2.2406.122, a low-privileged user that does not hold the admin or power Splunk roles could access sensitive search results if Splunk Enterprise runs an administrative search job in the background. If the low privileged user guesses the search job’s unique Search ID (SID), the user could retrieve the results of that job, potentially exposing sensitive search results. For more information see https://help.splunk.com/en/splunk-enterprise/search/search-manual/10.0/manage-jobs/about-jobs-and-job-management and https://help.splunk.com/en/splunk-enterprise/search/search-manual/10.0/manage-jobs/manage-search-jobs. |
