| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Tapo C120 v1 and C200 v5
contain a NULL pointer dereference in the HTTPS onboarding connect request parser. The interface is reachable without
authentication after initial setup and does not validate that a password field
is present for certain authentication and encryption parameter combinations,
allowing a malformed request from the same local network to crash the HTTPS service
Successful exploitation may
temporarily make HTTPS management functions unavailable. Repeated malformed
requests may sustain the denial-of-service condition, and recovery may in some
cases require a device reboot. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix error return when vfs_mkdir() fails
When vfs_mkdir() fails, the error code is not extracted from the
returned error pointer. This causes mkdir_error to be reached with
ret=0, which leads to returning ERR_PTR(0) (NULL) instead of a
proper error pointer.
Fix this by extracting the error code from the error pointer when
vfs_mkdir() fails. |
| A NULL pointer dereference vulnerability in the WatchGuard Fireware OS authentication process allows a remote, unauthenticated attacker to crash the management daemon by sending a specially request to the login interface, resulting in a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: refuse to make a monitor active when it has no queue
A monitor interface only gets a TXQ if it's created active, and one can't
be added later. Setting the flag on a down interface is still allowed, so
the driver is handed a monitor with no queue. ath9k dereferences it:
BUG: kernel NULL pointer dereference, address: 0000000000000066
RIP: 0010:ath_tx_node_init+0x49/0x170 [ath9k]
ath9k_add_interface+0x10c/0x140 [ath9k]
drv_add_interface+0x54/0x250 [mac80211]
ieee80211_do_open+0x32f/0x800 [mac80211]
Reached with CAP_NET_ADMIN by "iw dev X set monitor active" followed by
"ip link set X up". RTNL is held, so netlink operations block behind it.
Refuse the flag when there is no queue to give. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound
Transport drivers (such as rmi_i2c and rmi_spi) invoke
rmi_driver_suspend() and rmi_driver_resume() on their child rmi_dev
device during system power management events. However, transport drivers
are fully registered and operational even if the physical RMI driver
failed to bind or probe the rmi_dev device.
When rmi_driver_suspend() or rmi_driver_resume() is called on an unbound
rmi_dev, dev_get_drvdata() returns NULL. Calling rmi_disable_irq() or
rmi_enable_irq() without driver data attached causes a NULL pointer
dereference and General Protection Fault when attempting to lock
data->enabled_mutex.
Fix this by checking if driver data is attached to rmi_dev in
rmi_driver_suspend() and rmi_driver_resume(), exiting early if
no driver data is present. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's ext_authz filter assumes that a request contains a :path pseudoheader when applying query_parameters_to_set or query_parameters_to_remove from an authorization response. A path-less CONNECT request makes request_headers_->Path() return null, and Filter::onComplete dereferences that pointer while parsing the query string. An unauthenticated downstream client can crash the Envoy process when the filter and authorization response use query-parameter mutation. The relevant scope boundary is that the deployment must accept path-less CONNECT and configure ext_authz query-parameter mutation. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
| If BuildKit daemon is started with --cdi-disabled it can lead to daemon panic when builds try to use CDI devices. This can happen maliciously or by accident. |
| A null pointer dereference vulnerability exists in the Matter SDK (connectedhomeip) before 1.4.0, affecting the ReadRevisionAttribute function used in multiple clusters (Channel, Account Login, TargetNavigator, etc.). The function lacks proper validation of the delegate pointer before dereferencing. A remote unauthenticated attacker can exploit this issue by sending a crafted read request, causing the device to crash (denial of service). This issue has been confirmed in SDK version v1.4 (commit ab3d5ae). |
| Spoofing issue due to invalid pointer in the Graphics component. This vulnerability was fixed in Firefox 156 and Thunderbird 156. |
| Sandbox escape due to invalid pointer in the Graphics component. This vulnerability was fixed in Firefox 156, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| A NULL pointer dereference in mod_xml2enc in Apache Software Foundation Apache HTTP Server before 2.4.69 on all platforms allows an untrusted backend server to cause a denial of service via a proxied response with a charset whose conversion partially succeeds then fails.
Users are recommended to upgrade to version 2.4.69, which fixes this issue. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's ProdClusterManagerFactory::allocateConnPool dereferences transport_socket_options while selecting an HTTP/3 connection pool without first checking whether the pointer is null. LoadBalancerContext implementations used by synthetic, mirror, health-check, and async-client calls can return no transport-socket options. With auto_config and HTTP/3 enabled, routine traffic reaching one of those contexts can crash an Envoy worker. The relevant scope boundary is that the affected branch requires HTTP/3 in the protocol set and a context that supplies no transport-socket options. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add()
sas_port_alloc_num() can return NULL on memory allocation failure. The
return value is passed directly to sas_port_add() without a NULL check,
which causes a NULL pointer dereference.
Additionally, if sas_port_add() fails, the allocated port is not freed
before jumping to out_fail, leaking the sas_port structure. Call
sas_port_free() to properly release it. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Fix NULL pointer dereference in PM callbacks
msc313e_wdt_probe() doesn't set the driver data for the platform device.
As a result, dev_get_drvdata() in msc313e_wdt_suspend() and
msc313e_wdt_resume() will return NULL, leading to a NULL pointer
dereference afterward.
Set the platform device driver data in msc313e_wdt_probe(). |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix NULL deref in tipc_named_node_up() on empty publication list
User-space applications can bind a large number of service addresses to
one or more sockets. Each binding of a local-scope service address inserts
one entry (publication) into the TIPC name table. If the number of these
publications exceeds TIPC_MAX_PUBL (65535), protocol service types
(such as node state and link state) are no longer inserted into the name
table. This causes two issues:
1. User-space applications subscribing to node or link up/down events
stop receiving notifications.
2. A NULL pointer dereference can occur:
BUG: kernel NULL pointer dereference, address: 00000000000000d0
...
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc4-default+ #5 PREEMPT(full)
...
RIP: 0010:tipc_named_node_up (./include/linux/skbuff.h:2251 net/tipc/name_distr.c:195 net/tipc/name_distr.c:221)
...
Call Trace:
<IRQ>
tipc_node_write_unlock (net/tipc/node.c:428)
tipc_rcv (net/tipc/node.c:934 net/tipc/node.c:2189)
tipc_udp_recv (net/tipc/udp_media.c:389)
Thread 1 (tipc_net_finalize) | Thread 2 (named_distribute)
-----------------------------|-----------------------------
| ...
| list_for_each_entry(publ, pls, binding_node) {
| ...
| __skb_queue_tail(list, skb);
| ...
| }
| ...
| hdr = buf_msg(skb_peek_tail(list));
... |
tipc_nametbl_publish(); |
If 'tipc_nametbl_publish()' (Thread 1) fails because the number of
local publications reaches TIPC_MAX_PUBL, list (Thread 2) will be empty. As a
result, NULL is passed to 'buf_msg()', leading to a NULL pointer dereference.
Fix these issues by allowing protocol service types (node state, link state,
and topology server) to be inserted into the name table unconditionally.
This ensures that users subscribing to these types always receive
notifications. In addition, the maximum number of local user publications is
reduced to (TIPC_MAX_PUBL - 1). This ensures that the maximum bulk size
calculated in tipc_link_set_queue_limits() remains valid. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ump: do not touch legacy_rmidi before it exists
snd_ump_parse_endpoint() sets ump->parsed on every exit, including
error, before the caller attaches the legacy rawmidi device.
ump_handle_ep_name_msg() then treats parsed as "legacy_rmidi is live"
and calls ump_legacy_set_rawmidi_name(), which snprintf()s into
ump->legacy_rmidi->name. If a UMP packet arrives in that window
(IRQ path from snd_ump_receive), legacy_rmidi is still NULL
(KASAN null-ptr-deref in snprintf).
Guard the legacy helpers. parsed only means endpoint info was
parsed, not that legacy_rmidi exists. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject key-less BTF for hash maps
map_check_btf() allows a key-less BTF (btf_key_type_id == 0) only for
maps that have a ->map_check_btf callback, and leaves the actual
decision to that callback. Hash maps used to have no ->map_check_btf,
so a key-less BTF was rejected outright.
That changed when htab and rhtab gained a ->map_check_btf to register a
dtor - htab in commit 1df97a7453ee ("bpf: Register dtor for freeing
special fields") and rhtab in commit 6905f8601298 ("bpf: Allow special
fields in resizable hashtab"). Neither looks at the key, so a key-less
hash map now passes map_check_btf() and gets created. Reading it back
through bpffs feeds the key type_id 0 into btf_type_seq_show();
btf_type_by_id() returns the void type, kind_ops[BTF_KIND_UNKN] is NULL,
and btf_type_show() dereferences it:
RIP: 0010:btf_type_show+0x223/0x2e0 kernel/bpf/btf.c:8232
RSP: 0018:ffffc9000399f868 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000005 RSI: 0000000000000000 RDI: 0000000000000028
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: ffffc9000399f970 R11: 0000000000000001 R12: ffffffff9b96b140
R13: ffffc9000399f8e0 R14: ffff88803d393c00 R15: 0000000000000003
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000000000 CR3: 000000003d213000 CR4: 0000000000352ef0
DR0: 0000000039ae8f55 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
btf_type_seq_show_flags+0xca/0x120 kernel/bpf/btf.c:8250
htab_map_seq_show_elem+0x12e/0x350 kernel/bpf/hashtab.c:1669
map_seq_show+0x13d/0x1e0 kernel/bpf/inode.c:293
traverse.part.0.constprop.0+0x107/0x650 fs/seq_file.c:112
traverse fs/seq_file.c:99 [inline]
seq_read_iter+0x93f/0x1270 fs/seq_file.c:196
seq_read+0x344/0x4d0 fs/seq_file.c:163
vfs_read+0x1e4/0xb40 fs/read_write.c:572
ksys_pread64 fs/read_write.c:764 [inline]
__do_sys_pread64 fs/read_write.c:772 [inline]
__se_sys_pread64 fs/read_write.c:769 [inline]
__x64_sys_pread64+0x1eb/0x250 fs/read_write.c:769
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reject a key-less BTF in htab_map_check_btf() and rhtab_map_check_btf(),
restoring the previous behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL-ptr-deref when showing a void BTF type
btf_modifier_show() resolves the modifier and then calls
btf_type_ops(t)->show() unconditionally. For the void type (type_id 0,
BTF_KIND_UNKN) kind_ops[] has no entry, so ->show is NULL.
A "const void" (a modifier resolving to void) cannot be a map key or
value - map_check_btf() rejects it because void has no size - so the map
dump path does not reach it. But bpf_snprintf_btf() takes a type_id
straight from the BPF program, and passing such a "const void" from the
vmlinux BTF NULL-derefs:
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
RIP: 0010:btf_modifier_show (kernel/bpf/btf.c:2914)
Call Trace:
<TASK>
btf_type_show (kernel/bpf/btf.c:8251)
btf_type_snprintf_show (kernel/bpf/btf.c:8321)
bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047)
bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829)
__sys_bpf (kernel/bpf/syscall.c:4804)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Fall back to btf_df_show() when the resolved type has no show op; it
emits the "<unsupported kind:N>" placeholder already used for kinds like
FWD and FUNC. bpf_snprintf_btf() then returns the length as usual. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL-ptr-deref in btf_var_show()
btf_var_show() calls btf_type_id_resolve() unconditionally, which
dereferences btf->resolved_ids. That is NULL for a base BTF - e.g. the
vmlinux BTF that bpf_snprintf_btf() renders against - since base BTF is
not resolved during parsing. btf_modifier_show() guards this with
'if (btf->resolved_ids)', but btf_var_show() does not.
A BPF program that passes the type_id of a BTF_KIND_VAR from the vmlinux
BTF to bpf_snprintf_btf() thus NULL-derefs:
KASAN: probably user-memory-access in range [0x46638-0x4663f]
RIP: 0010:btf_var_show (kernel/bpf/btf.c:2929)
Call Trace:
<TASK>
btf_type_show (kernel/bpf/btf.c:8259)
btf_type_snprintf_show (kernel/bpf/btf.c:8329)
bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047)
bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829)
__sys_bpf (kernel/bpf/syscall.c:4804)
do_syscall_64 (arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Resolve the var's type directly with btf_type_skip_modifiers() when
resolved_ids is NULL, mirroring btf_modifier_show(). |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix cmd_regs access racing BAR unmap on reset
pdsc_reset_prepare() and pdsc_reset_done()'s pdsc_map_bars() error path
clear/iounmap cmd_regs without devcmd_lock, and
pdsc_legacy_firmware_update()'s download loop derefs cmd_regs after
dropping and retaking the lock without re-checking. An FLR concurrent
with a devlink flash can unmap cmd_regs under an in-flight devcmd,
causing a NULL deref or a write to unmapped MMIO.
Take devcmd_lock across the BAR unmap/remap, and re-check cmd_regs in
the download loop. Only the PF maps cmd_regs and runs devcmd, so skip
the unmap on a VF, as pdsc_remove() and pdsc_reset_done() already do.
A reset that completes entirely within the unlocked window is not a
correctness problem for the image: the device clears its update session,
so a resumed download is rejected, and it verifies the staged image
before writing a flash slot, reporting PDS_RC_BAD_FW rather than
activating it.
pdsc_unmap_bars() also clears info_regs, intr_status and intr_ctrl. The
interrupt and start/stop readers of those are quiesced before the unmap
by pdsc_fw_down(), which frees the interrupts and tears down the queues.
The debugfs readers are not, since those files outlive a reset; that is
pre-existing and out of scope here. |
