| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Feast through 0.66.0 fails to verify JWT token signatures before establishing user identity, allowing attackers to bypass all role-based access control by presenting an unverified token with a hardcoded claim value. Attackers can obtain trusted internal identity and gain unchecked read and write access to all entities, feature views, data sources, and permission policies on the server. |
| Craft CMS versions from 5.7.0 before 5.10.13 contain a stored cross-site scripting vulnerability in the Generated Fields feature that disables Twig autoescaping and fails to encode cached values. Content editors can inject malicious JavaScript through editable fields that executes in authenticated Control Panel sessions of higher-privileged users viewing element indexes. |
| In AVideo through 29.0, the CloneSite plugin is vulnerable to stored OS command injection. In plugin/CloneSite/cloneClient.json.php (line ~270) the stored SSH password is substituted into the command string `sshpass -p '{password}' rsync ...` with a plain str_replace and no escaping, so a single quote in the password breaks out of the quoted word and injects arbitrary shell. The password is written through the admin-only endpoint objects/pluginAddDataObject.json.php, whose only CSRF defense (isUntrustedRequest()/forbidIfIsUntrustedRequest()) is a no-op when the request source appears to be loopback — as happens behind a same-host TLS-terminating reverse proxy with $global['trustedProxies'] unset — or when an attacker-controlled application is co-hosted on the same hostname; on HTTPS the session cookie is issued with SameSite=None, so a cross-site POST carries it. An unauthenticated remote attacker can therefore lure an authenticated administrator into planting a malicious password (and an attacker-controlled cloneSiteURL), after which the plugin's documented crontab entry executes the injected command with no further administrator action, as the crontab owner (commonly root or www-data). Exploitation requires the CloneSite plugin to be enabled with the documented crontab installed and one of the above CSRF channels; default single-process Apache deployments are reported as not CSRF-exploitable. This is a residual sink of CVE-2026-41304. The issue is confirmed at master HEAD (8963b6a1); no patched version is available. |
| The Kubio AI Page Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via kubio/copyright Block Content in all versions up to, and including, 2.8.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This bypasses both the WordPress core kses-on-save filter and the plugin's own wp_kses_post() call, because entity-encoded script tags are treated as inert text by kses but are decoded into live HTML by the subsequent html_entity_decode() call in CopyrightBlock::render_template(). |
| The Jeg Kit for Elementor – Powerful Addons for Elementor, Widgets & Templates for WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content in all versions up to, and including, 3.2.16 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires that the targeted post also renders a legitimate Jeg Kit Countdown widget, which causes the countdown frontend script to be enqueued and to initialize on any matching DOM element — including forged widget markup stored in comments. |
| Imager versions before 1.036 for Perl exit the process reading a TGA with a colour map length of 32768 or more in tga_palette_read.
The reader unpacks the two-byte colour map length into a signed short, so a length of 32768 or more becomes negative. tga_palette_read() casts that value to size_t and asks mymalloc() for a size near SIZE_MAX. The allocation fails and Imager's allocator calls exit(3).
Reading an attacker-supplied file through Imager->read() triggers an uncatchable exit. |
| SQLBot is an intelligent Text-to-SQL system based on large language models and RAG. Prior to 1.9.0, an authenticated uploader can submit an image/svg+xml assistant UI logo through PATCH /api/v1/system/assistant/ui, and SQLBot stores the SVG without sanitizing or validating embedded active content. SQLBot later serves the file inline from the same application origin through GET /api/v1/system/assistant/picture/{filename}. When another user loads that generated resource, JavaScript embedded in the SVG executes in the SQLBot web application context, resulting in stored cross-site scripting with access to data and actions available to the victim's session. This issue is fixed in version 1.9.0. |
| Hamlib is a ham radio control library for radios, rotators, and amplifiers. Prior to 4.7.2, the unauthenticated rigctld send_raw command on TCP port 4532 reaches rigctl_send_raw() in tests/rigctl_parse.c, which writes a NUL byte at buf[buf_len + 1] outside its 200-byte stack buffer, and rig_send_raw() in src/rig.c, which copies reply_len - 1 bytes instead of the actual nbytes received. A remote client can send the CR terminator with a short payload to trigger both flaws in one command under the default no-password configuration. The out-of-bounds write can crash the daemon or corrupt adjacent stack memory, while the oversized copy can return up to 198 bytes of uninitialized stack data to the client. This issue is fixed in version 4.7.2. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix request buffer leak in smb2_new_read_req()
smb2_new_read_req() allocates the request buffer with
smb2_plain_req_init() but only publishes it to the caller with
*buf = req at the very end of the function. Two error returns sit in
between:
rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server,
(void **) &req, total_len);
if (rc)
return rc;
if (server == NULL)
return -ECONNABORTED;
[...]
rdata->mr = smbd_register_mr(server->smbd_conn,
&rdata->subreq.io_iter,
true, need_invalidate);
if (!rdata->mr)
return -EAGAIN;
On either of them the buffer is neither released nor handed back, so
it is leaked. The caller cannot clean up after it: smb2_async_readv()
does 'goto out' on a non-zero return, which skips the
cifs_small_buf_release(buf) at async_readv_out, and buf has not been
assigned at that point in any case.
The write path has never had this problem. smb2_async_writev()
registers the memory region inline and jumps to its release label
instead of returning:
wdata->mr = smbd_register_mr(...);
if (!wdata->mr) {
rc = -EAGAIN;
goto async_writev_out;
}
Commit b7972092199f ("cifs: smbd: Retry on memory registration
failure") changed both sides from -ENOBUFS to -EAGAIN in a single
patch, which puts the two shapes next to each other.
Only the -EAGAIN return is reachable in practice, because
smb2_plain_req_init() calls smb2_reconnect() first and that already
fails with -EIO when server is NULL, before anything is allocated.
Both returns are given the same treatment here rather than leaving
one of them correct only by accident.
Because -EAGAIN is a replayable error, the failure also reaches the
retry block at the end of smb2_async_readv(), which marks the
subrequest NETFS_SREQ_NEED_RETRY, so a failing registration can be
retried rather than ending the I/O, and every attempt that reaches it
leaks another buffer. smb2_should_replay() short-circuits on
tcon->retry, so on a hard mount the attempt count is not bounded by
the retrans setting.
Only the asynchronous read path is affected. The synchronous
SMB2_read() caller passes rdata == NULL and the memory registration
block is guarded on rdata.
The memory registration failure path was pointed out by the Sashiko
AI reviewer while it was reviewing an unrelated patch to
smb2_async_readv(). |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix kmap_local_page() usage in compress
Several compressed I/O paths discard the address returned by
kmap_local_page() and later access or unmap the page using page_address().
This is invalid for highmem pages, and local mappings must also be unmapped
using the address returned by kmap_local_page().
Map each destination page in ntfs_decompress() only while producing the
current sub-block. Use memcpy_from_page(), memcpy_to_page(), and
memzero_page() for the other page accesses. Remove unnecessary local
mappings from ntfs_write_cb(), where pages are accessed through the vmap()
mapping. |
| mport is the MidnightBSD Package Manager. Prior to 2.7.8, mport_verify_package() in libmport/verify.c could continue after MD5File() or SHA256_File() failed and compare an expected checksum with stale data in the hash buffer rather than a newly computed digest. An attacker able to influence an installed file or the conditions that make hashing fail could receive a misleading integrity result or hide a checksum failure. This issue is fixed in version 2.7.8. |
| Valhalla is an open source routing engine and accompanying libraries for use with OpenStreetMap data. In 3.7.0 and earlier, a POST request to /sources_to_targets containing an exclude_polygons ring formed by three collinear points can cause unbounded memory growth in the worker. The zero-area geometry, rather than the other request options, triggers processing in src/loki/polygon_search.cc until the process is terminated by the out-of-memory killer. A single unauthenticated request can therefore stop a public-facing worker. Other endpoints that accept exclude_polygons, including /route, were not verified as affected. No fixed version is available as of this review. |
| Caddy is an extensible server platform that uses TLS by default. In version 2.11.3 and earlier, three configuration-dependent weaknesses affect the handler and placeholder layer. In modules/caddyhttp/rewrite/rewrite.go, Rewrite.Rewrite() can pass attacker-controlled replacement bytes through buildQueryString for a second placeholder expansion when a rewrite URI ends with a literal question mark, allowing injected environment or request-variable placeholders to disclose data and, when the file provider is registered, allowing injected file placeholders to disclose readable files. The issue is fixed in version 2.11.4. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: free pending qentry in smc_llc_flow_stop() before memset
smc_llc_flow_stop() resets a flow struct with a blind memset:
spin_lock_bh(&lgr->llc_flow_lock);
memset(flow, 0, sizeof(*flow));
flow->type = SMC_LLC_FLOW_NONE;
spin_unlock_bh(&lgr->llc_flow_lock);
If flow->qentry is non-NULL at this point the pointer is overwritten without the
allocation being freed, leaking one kmalloc object.
A late-arriving duplicate CONFIRM_LINK or ADD_LINK_CONT message can set
flow->qentry after the legitimate message has been consumed by the waiter via
smc_llc_flow_qentry_clr() (which NULLs the pointer but leaves flow->type
non-zero) but before the flow completes and smc_llc_flow_stop() runs. In that
window the duplicate is stashed into flow->qentry, and then lost when
smc_llc_flow_stop() zeros the struct.
Call smc_llc_flow_qentry_del() inside the lock before the memset.
smc_llc_flow_qentry_del() already checks flow->qentry before freeing, so the
normal case where no entry is pending is a no-op. |
| QND contains an improper access control vulnerability in a named pipe, which may allow a local attacker who is logged in to a Windows PC where the affected product's client is installed to execute arbitrary commands with SYSTEM privileges. |
| On affected platforms running Arista EOS with gRPC Network Security Interface (gNSI) Credentialz configured, a specially crafted request can cause unintended modifications to the target account's properties. This may result in the account being assigned elevated privileges or access beyond what an administrator intended. |
| OpenSlide is a C library for reading whole slide image files. Prior to 4.0.1, a behavior change in libtiff 4.7.1 causes the indirect TIFF tile path in src/openslide-decode-tiff.c and _openslide_tiff_read_tile() to request a full-height destination for a partial bottom tile row, allowing uninitialized heap memory to enter pixel data returned by openslide_read_region(). A crafted but valid slide can trigger the issue in TIFF-based formats other than Hamamatsu NDPI when a network service renders attacker-provided slides. Successful extraction depends on pixel transparency handling and recompression, OpenSlide with libtiff 4.7.0 or earlier is not affected, and official binary builds 4.0.0.10 and 4.0.0.11 are affected. This issue is fixed in OpenSlide 4.0.1 and official binary build 4.0.0.12. |
| Svelte devalue is a JavaScript library that serializes values into strings when JSON.stringify isn't sufficient for the job. Prior to 5.9.2, devalue.parse does not reject out-of-bounds indices that are greater than or equal to values.length in src/parse.js. A specially crafted untrusted payload can make the parser alternate between array representations, producing quadratic work as the payload grows and causing denial of service in applications that parse untrusted devalue data. This issue is fixed in version 5.9.2. |
| CoreDNS is a DNS server written in Go. Prior to 1.14.7, the DNS-over-HTTPS, DNS-over-HTTP/3, DNS-over-QUIC, and DNS-over-gRPC request paths in plugin/pkg/doh/doh.go, core/dnsserver/server_quic.go, and core/dnsserver/server_grpc.go call dns.Msg.Unpack on attacker-controlled DNS section counts before dns.DefaultMsgAcceptFunc validates the fixed header. An unauthenticated client can use DNS name compression and excessive section counts to amplify allocation before the plugin chain, so plugin-level rate limiting cannot prevent concurrent requests from exhausting memory and terminating CoreDNS. The ordinary UDP and TCP listeners are not affected because they validate the header first. This issue is fixed in version 1.14.7. |
| Redocly CLI makes OpenAPI validation, linting, and documentation workflows easier. Prior to @redocly/cli 2.33.2, the split command constructs output paths under --outDir from untrusted OpenAPI or AsyncAPI component names and x-codeSamples lang values without verifying that the resolved target remains inside the selected directory. A description containing literal ../ traversal segments in those fields can cause the split command to place or overwrite files outside --outDir. Component data remains constrained to YAML or JSON, and code-sample filenames remain based on the HTTP method, so this is not an unrestricted arbitrary-content file write. This issue is fixed in @redocly/cli version 2.33.2. |
