| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2
When a valid primary TRANSACT2 response has been received (mid->resp_buf
set, mid->multiRsp true) and a subsequent secondary response causes
cifs_check_trans2() to return false -- either because the SMB header is
invalid (malformed != 0) or because check2ndT2() rejects the PDU --
handle_mid() overwrites mid->resp_buf with the new buffer (leaking the
primary buffer) and, because mid->multiRsp is set, skips the
server->smallbuf/bigbuf NULL-out. When the user thread frees
mid->resp_buf, server->smallbuf or server->bigbuf is left dangling; the
demux thread reuses it for the next packet, resulting in a use-after-free.
Combine both early-exit conditions and, when mid->multiRsp is already
set, abort the pending transaction inline: set multiEnd, call
dequeue_mid() with malformed=true, and return true so handle_mid() exits
without touching mid->resp_buf or the server buffer pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: only rebind the reopened file's own oplock on durable reconnect
ksmbd_reopen_durable_fd() walks the inode's m_op_list and rebinds every
detached oplock to the reconnecting session:
list_for_each_entry_rcu(op, &ci->m_op_list, op_entry,
lockdep_is_held(&ci->m_lock)) {
if (op->conn)
continue;
op->conn = ksmbd_conn_get(fp->conn);
op->sess = work->sess;
}
The only key is op->conn == NULL, which every detached durable handle on
that inode matches, not just the one owned by fp. When two sessions hold
durable handles on the same file and both disconnect, reconnecting one of
them adopts the other session's oplock: op->sess is overwritten with the
reconnecting session without taking a reference on it, while op->conn
pins the connection.
The sibling teardown path, session_fd_check(), keys on the identity of
the connection being torn down (op->conn == conn) rather than on shared
state, and so does not have this problem.
Once the adopting session is destroyed, ksmbd_session_destroy() frees it
while the foreign oplock still points at it. The reader in
ksmbd_close_fd_app_instance_id() validates only opinfo->conn, which is
still live thanks to the reference taken above, and then dereferences the
stale session:
if (!opinfo->conn) {
up_read(&fp->f_ci->m_lock);
goto out;
}
ft = &opinfo->sess->file_table;
write_lock(&ft->lock);
BUG: KASAN: slab-use-after-free in _raw_write_lock+0x74/0xd0
Write of size 4 at addr ffff88810a970528 by task kworker/0:0/9
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
_raw_write_lock+0x74/0xd0
ksmbd_close_fd_app_instance_id+0x183/0x410
smb2_open+0x1346/0x4430
handle_ksmbd_work+0x2bb/0x7b0
Reached from an authenticated session against a share with the default
durable-handle and oplock configuration: two sessions open the same file
with a durable-v2 handle and an RH lease under distinct AppInstanceIds,
both log off, one reconnects with DH2C, and a later durable-v2 create
carrying the other AppInstanceId walks into the freed session.
Constrain the loop to the oplock owned by the file being reopened. |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: Fix lost inode updates for IS_SYNC inodes
ext2_setsize() and ext2_xattr_set2() had a construct like:
if (IS_SYNC(inode)) {
sync_inode_metadata(inode, 1);
} else {
mark_inode_dirty(inode);
}
which leads to lost inode updates for IS_SYNC inodes because
sync_inode_metadata() does anything only if the inode is already dirty
and hence inode updates may be simply lost. Fix the problem by
unconditionally marking the inode dirty and *then* call
sync_inode_metadata(). |
| In the Linux kernel, the following vulnerability has been resolved:
fanotify: fix use-after-free of file range info
fsnotify_pre_content() builds its file_range on the triggering task's
stack. fanotify_alloc_perm_event() saves a pointer to range.pos in the
heap-allocated permission event so copy_range_info_to_user() can report
the offset later.
The event reader can set the event state to FAN_EVENT_REPORTED and then
sleep while preparing the file descriptor. If a signal interrupts the
triggering task at that point, fanotify_get_response() changes the state
to FAN_EVENT_CANCELED and returns. This unwinds the file_range stack
frame while the reader still owns the event. The reader then dereferences
pevent->ppos and copies the stale stack value to userspace.
KASAN reported:
BUG: KASAN: use-after-free in fanotify_read+0x293e/0x2970
Read of size 8 at addr ffff88811434fc50 by task fanotify_inotif/95
Call Trace:
fanotify_read+0x293e/0x2970
vfs_read+0x177/0xa20
ksys_read+0xf7/0x1c0
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Store the range position directly in the permission event and use
FANOTIFY_NO_RANGE when range information is unavailable. The event remains
alive until the reader finishes, so the reported offset no longer depends
on the triggering task's stack. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Clear sc_cm_id when ADDR_CHANGE replacement fails
When svc_rdma_listen_handler() handles RDMA_CM_EVENT_ADDR_CHANGE,
it creates a replacement listener cm_id and returns 1, telling
the CM core to destroy the old one. If the replacement allocation
fails, sc_cm_id still points at the old cm_id that the CM core is
about to destroy. Any subsequent dereference of sc_cm_id --
such as svc_rdma_detach()'s rdma_disconnect() call -- is a
use-after-free.
NULL sc_cm_id on the failure path and guard svc_rdma_detach()'s
rdma_disconnect() call against NULL so that the listener can
be torn down safely when the server shuts down. |
| In the Linux kernel, the following vulnerability has been resolved:
media: staging/ipu7: fix async notifier UAF on probe error path
isys_register_devices() registers the V4L2 async notifier via
isys_notifier_init(). If a subsequent probe step such as
isys_fw_log_init() fails, isys_probe() jumps to the out_cleanup label
which only calls isys_unregister_devices(). That helper tears down the
video devices, subdevices, V4L2 device and media device, but never
unregisters or cleans up the async notifier.
As a result the notifier stays chained in the global notifier_list while
the enclosing struct ipu7_isys is freed by devres, leading to list
corruption and a use-after-free the next time the list is walked.
The remove path already does the right thing by calling
isys_notifier_cleanup() before isys_unregister_devices(). Mirror that on
the probe error path so the notifier is unregistered and cleaned up
before the device is torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Fix use-after-free of cmd_rcvr in _ipmi_destroy_user()
Commit 9e91f8a6c868 ("ipmi:msghandler: Remove srcu for the
ipmi_interfaces list") dropped the synchronize_rcu() between unlinking
the command receivers from intf->cmd_rcvrs and freeing them, updating
only the comment that explains why the barrier is needed.
The cmd_rcvrs list is still traversed under plain RCU: find_cmd_rcvr()
walks it inside rcu_read_lock(), and handle_ipmb_get_msg_cmd() borrows
rcvr->user from that lookup within the same read-side section. Without
the grace period, _ipmi_destroy_user() can kfree() a cmd_rcvr while a
reader still holds a pointer to it, causing a use-after-free.
The rework only made srcu unnecessary for the interfaces list; the
cmd_rcvrs list still relies on plain RCU. Restore the synchronize_rcu()
before freeing the receivers. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/percpu: Fix MVIY_PERCPU() with older binutils
Commit a737737cdb9c ("s390/percpu: Infrastructure for more efficient
this_cpu operations") introduced MVIY_PERCPU(), which stringifies
arguments that are already C string literals. This generates an
assembler macro invocation with whitespace-separated quoted arguments:
GEN_MVIY "459712" "%r3"
GNU as versions prior to binutils 2.39 drop the separating whitespace
between quoted macro arguments during input scrubbing. They
consequently parse the invocation as a single argument and emit
repeated warnings:
Warning: missing closing `"'
The .ifc in GEN_MVIY never matches and GNU as exits successfully
without emitting the mviy instruction. As a result, the interrupted
per-CPU sequence is not marked in lowcore and the exception return
path cannot repair the per-CPU address register after migration.
All MVIY_PERCPU() callers pass C string literals. Use them directly
and separate the assembler macro arguments with an explicit comma. The
resulting invocation is:
GEN_MVIY 459712, %r3
This form is unambiguous for GNU as and LLVM's integrated assembler.
This behavior was fixed in GNU as from binutils 2.39, but Linux
supports binutils 2.30. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Remove all sysfs files on registration failure
ipmi_add_smi() creates the nr_users and nr_msgs files before trying to
create the maintenance_mode file. If that last creation fails, the error
path removes only nr_users before dropping the final reference to the
interface.
Remove nr_msgs as well so no sysfs attribute embedded in the freed
interface remains registered. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bnxt: ring the doorbell when SW USO exits early
When a burst of packets is handed down to the driver, the driver defers
the doorbell to the end by setting txr->kick_pending = 1. The normal TX
path handles this, but the SW USO path can miss it if it returns
early.
If bnxt_sw_udp_gso_xmit runs but returns early with NETDEV_TX_BUSY and
txr->kick_pending was previously set to 1, then the TX queue can
stall because the driver wrote some BDs but never wrote the doorbell.
The device won't know to do the TX which would generate the completion
that would wake the queue back up.
Simplify bnxt_sw_udp_gso_xmit to set txr->kick_pending in its success
case and check the flag on return. The added check after
bnxt_sw_udp_gso_xmit returns ensures that any pending doorbells are
written handling both successful USO and any early returns, which
prevents the TX queue stall mentioned above.
This TX queue stall was observed on a production system with a netdev TX
watchdog informing about the queue stall. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipa: fix stalled modem TX queue after runtime resume
ipa_start_xmit() unconditionally stops the TX queue before calling
pm_runtime_get(), relying on the wake scheduled by runtime resume
(ipa_modem_wake_queue_work()) to restart it once power is ACTIVE.
But that work is queued from within the runtime resume callback,
before the device's power state reaches RPM_ACTIVE, so it can run
while the device is still RPM_RESUMING. The wake is then consumed
too early: the transmit it restarts stops the queue again,
pm_runtime_get() returns -EINPROGRESS without arranging any future
wake (deferred_resume exists only for RPM_SUSPENDING), and after the
resume completes nothing is left to wake the queue. Transmit stalls
permanently: packets pile up in the qdisc behind the stopped queue,
the device runtime-suspends, and since the netdev registers no
ndo_tx_timeout the watchdog never fires. Observed on SM7635
(Fairphone 6) as the cellular data path going permanently deaf
within hours, RX included, since nothing resumes the suspended
endpoints.
Close the window by making the wake work wait for the resume to
complete (pm_runtime_get_sync()) before waking the queue. Every
queue stop is then guaranteed a later wake that happens while power
is ACTIVE; a transmit racing a new suspend/resume cycle re-schedules
the work. If the device could not be resumed, wake the queue anyway
so pending packets are dropped by the transmit path rather than
stranded.
The STARTED power flag used to narrow this window: a wake running
before the transmit path's stop suppressed that stop, but only once,
as the flag was cleared by the first stop it absorbed. Removing the
flag made a single transmit during an in-flight resume sufficient to
strand the queue, which is the form observed.
With an accelerated reproducer (autosuspend delay shortened to 5 ms,
~20 packets/s of TX), an unpatched kernel stalled three times in
230 s / 4380 packets; with this patch the same test ran 3601 s /
70298 packets without a stall. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: hold a reference to the route device in mctp_route_lookup()
mctp_route_lookup() uses rt->dev without holding a reference on it.
mctp_route_lookup_single() returns the route under RCU only, so the
route's device can be torn down concurrently: mctp_dev_put() drops the
last reference and synchronously kfree()s mdev->addrs. mctp_dev_saddr()
then reads rt->dev->addrs[0], giving a use-after-free reachable by an
unprivileged local AF_MCTP user on the receive/forwarding path (no
CAP_NET_RAW required):
BUG: KASAN: slab-use-after-free in mctp_route_lookup
Read of size 1 at addr ... by task mctp_uaf/...
mctp_route_lookup
mctp_pkttype_receive
Freed by task ...:
kfree
mctp_dev_put
mctp_dev_notify
In the same window mctp_dst_from_route() -> mctp_dev_hold() also
increments a refcount that has already reached zero
("refcount_t: addition on 0 ... mctp_dev_hold").
This reintroduces the use-after-free class of CVE-2023-3439: the source
address lookup was moved ahead of the point where the destination takes
its device reference.
Take a reference with refcount_inc_not_zero() before touching rt->dev,
skip a device that is already dead, and drop the reference once the
destination has taken its own. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix use-after-free of the LLC qentry in smc_llc_srv_add_link()
smc_llc_srv_add_link() keeps add_llc pointing into the queue entry:
add_llc = &qentry->msg.add_link; smc_llc.c:1482
...
smc_llc_save_add_link_info(link_new, add_llc); smc_llc.c:1494
smc_llc_flow_qentry_del(&lgr->llc_flow_lcl); smc_llc.c:1495
...
u8 *llc_msg = smc_link_shared_v2_rxbuf(link) ?
(u8 *)lgr->wr_rx_buf_v2 : (u8 *)add_llc; smc_llc.c:1504
smc_llc_save_add_link_rkeys(link, link_new, llc_msg); smc_llc.c:1506
smc_llc_flow_qentry_del() kfree()s the entry, so on a link without a shared
v2 receive buffer the pointer handed to smc_llc_save_add_link_rkeys() is
already freed. Before the Fixes: commit that branch always used
lgr->wr_rx_buf_v2 and add_llc was not used after the free.
Reproduced on an unpatched tree over rxe, with KASAN, kasan_multi_shot
and a link forced to max_recv_sge == 1: the entry is freed and read by
the same call, and the freeing frame is smc_llc_srv_add_link() itself.
[ 2.523161] BUG: KASAN: slab-use-after-free in smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523499] Read of size 2 at addr ffff8880052194de by task kworker/0:1/11
[ 2.523789]
[ 2.523862] CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0-rc5-p0-g2c9dd296545d #35 PREEMPT(lazy)
[ 2.523865] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 2.523866] Workqueue: smc_hs_wq smc_listen_work
[ 2.523869] Call Trace:
[ 2.523870] <TASK>
[ 2.523871] dump_stack_lvl+0x53/0x70
[ 2.523872] print_report+0xd0/0x630
[ 2.523874] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 2.523876] ? smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523878] kasan_report+0xce/0x100
[ 2.523879] ? smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523881] smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.523883] ? smcr_buf_reg_lgr+0x2a4/0x660
[ 2.523885] smc_llc_srv_add_link+0xaa2/0x1e50
[ 2.523888] ? _printk+0xba/0xf0
[ 2.523897] ? __pfx_smc_llc_srv_add_link+0x10/0x10
[ 2.523899] ? down_write+0xb0/0x130
[ 2.523903] ? __pfx_down_write+0x10/0x10
[ 2.523905] smc_listen_work+0x489e/0x4d00
[ 2.523907] ? kmem_cache_free+0x1c6/0x3a0
[ 2.523911] ? __pfx_smc_listen_work+0x10/0x10
[ 2.523913] ? release_sock+0x148/0x1d0
[ 2.523915] ? smc_tcp_listen_work+0xb4f/0xfc0
[ 2.523917] ? _raw_spin_lock_irq+0x80/0xe0
[ 2.523918] ? __pfx__raw_spin_lock_irq+0x10/0x10
[ 2.523920] process_one_work+0x633/0x1030
[ 2.523922] ? assign_work+0x11d/0x370
[ 2.523924] worker_thread+0x45b/0xd10
[ 2.523926] ? __pfx_worker_thread+0x10/0x10
[ 2.523928] ? __pfx_worker_thread+0x10/0x10
[ 2.523929] kthread+0x2c6/0x3b0
[ 2.523931] ? recalc_sigpending+0x15c/0x1e0
[ 2.523934] ? __pfx_kthread+0x10/0x10
[ 2.523935] ret_from_fork+0x36e/0x5a0
[ 2.523937] ? __pfx_ret_from_fork+0x10/0x10
[ 2.523938] ? __switch_to+0x572/0xdd0
[ 2.523943] ? __pfx_kthread+0x10/0x10
[ 2.523944] ret_from_fork_asm+0x1a/0x30
[ 2.523947] </TASK>
[ 2.523948]
[ 2.531253] Allocated by task 48:
[ 2.531399] kasan_save_stack+0x33/0x60
[ 2.531570] kasan_save_track+0x14/0x30
[ 2.531737] __kasan_kmalloc+0x8f/0xa0
[ 2.531905] __kmalloc_cache_noprof+0x158/0x370
[ 2.532100] smc_llc_enqueue+0x72/0x560
[ 2.532268] smc_wr_rx_tasklet_fn+0x474/0xa80
[ 2.532491] tasklet_action_common+0x20f/0x8a0
[ 2.532714] handle_softirqs+0x18e/0x590
[ 2.532886] do_softirq+0x3b/0x60
[ 2.533036] __local_bh_enable_ip+0x61/0x70
[ 2.533221] __alloc_skb+0x732/0x890
[ 2.533384] rxe_init_packet+0x16b/0x4f0
[ 2.533567] prepare_ack_packet+0xb8/0x830
[ 2.533760] rxe_receiver+0x495/0x96e0
[ 2.533933] do_work+0x144/0x470
[ 2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: fix use-after-free and invalid seg operations in kset_replay()
In kset_replay, when key->seg_gen is stale (key->seg_gen <
key->cache_pos.cache_seg->gen), cache_key_put(key) is called but then
key->cache_pos.cache_seg is accessed as the argument to cache_seg_get().
This is a use-after-free on the freed key memory. Although mempool
recycled memory is not immediately reclaimed or overwritten in practice,
this is still a potential UAF bug.
Additionally, for expired invalid keys, setting the cache->seg_map bit
and calling cache_seg_get() is unreasonable since the corresponding
segment data is no longer valid.
Fix both issues by moving cache_seg_get() and __set_bit() after the
gen check, so they only execute for valid keys, and using continue to
skip invalid keys. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: renesas: Check that the transfer is valid before accessing it
The Renesas I3C driver uses an asynchronous model to transfer data. It
prepares a struct renesas_i3c_xfer, enqueues it, and waits for completion.
The interrupt handler dequeues the transfer, updates/uses it, and signals
the waiting thread.
If the completion times out, the waiting thread dequeues the transfer and
free it. If an interrupt fires after that, the handler may access freed
memory, leading to crashes.
Check that the transfer is still valid before accessing it in the
interrupt handler. With it clear any status flags and disable all
the interrupts to avoid triggering the same interrupts again. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl8xxxu: fix use-after-free from rx_urb_wq on stop
rtl8xxxu arms rx_urb_wq from the RX completion path:
rtl8xxxu_rx_complete() hands the URB to rtl8xxxu_queue_rx_urb(), which
queues it on rx_urb_pending_list and, once the list grows past
RTL8XXXU_RX_URB_PENDING_WATER, schedules rx_urb_wq. The worker
rtl8xxxu_rx_urb_work() drains rx_urb_pending_list, recovers priv through
container_of, and resubmits each URB through rtl8xxxu_submit_rx_urb(),
which anchors it on rx_anchor and dereferences priv->udev.
rtl8xxxu_stop() cancels the sibling work items (c2hcmd_work, ra_watchdog,
update_beacon_work) but never cancels rx_urb_wq, so a worker armed during
the last burst of RX traffic can run rtl8xxxu_rx_urb_work() after
rtl8xxxu_disconnect() has called ieee80211_free_hw(), which frees priv,
producing a use-after-free. The window opens under active RX traffic
(pending count above the watermark) followed by a disconnect.
There are two teardown races to close:
* rtl8xxxu_queue_rx_urb() decided whether to enqueue under rx_urb_lock
but called schedule_work() after dropping the lock. A completion
that observed shutdown == false and released the lock could then call
schedule_work() after rtl8xxxu_stop() had set shutdown and
cancel_work_sync() had already returned, arming the worker to run
after the teardown. Move schedule_work() under the same !shutdown
branch so the arming decision is atomic with the shutdown check.
* rtl8xxxu_rx_urb_work() anchors every URB it drained back onto
rx_anchor through rtl8xxxu_submit_rx_urb(). A worker still running
when usb_kill_anchored_urbs(&priv->rx_anchor) returned would submit a
URB that escaped the kill. In rtl8xxxu_stop(), call
cancel_work_sync(&priv->rx_urb_wq) before the kill so the worker is
drained first.
After priv->shutdown is set under rx_urb_lock, completions can no longer
queue rx_urb_wq. cancel_work_sync() then drains the last queued or running
worker, and the following usb_kill_anchored_urbs() kills the URBs it may
have submitted.
rtl8xxxu_disconnect() is covered because ieee80211_unregister_hw()
guarantees .stop() runs for a live interface before ieee80211_free_hw()
frees priv. The probe error path needs no cancel: rx_urb_wq is
INIT_WORK()'d there but cannot have been scheduled, since no URB is
submitted before ieee80211_register_hw() succeeds.
This bug was found by static analysis. |
| Editor SQL Injection in Sky Addons for Elementor <= 3.8.4 versions. |
| Unauthenticated Broken Access Control in Booktics <= 1.0.24 versions. |
| Concrete CMS 9.2.0 to 9.5.2 contain a missing authorization vulnerability in the REST API Groups list endpoint. The listGroups() method in concrete/src/Api/Controller/Groups.php registers a permissions checker callback that unconditionally returns true, so no per-object (tree node) authorization is enforced when the group collection is returned. An authenticated user whose API token carries the groups:read scope can call GET /ccm/api/1.0/groups and receive every group on the site regardless of the view permissions on those groups, disclosing the organization's group structure, roles, and access hierarchy. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 6.0 with vector CVSS:4.0/AV:N/AC:L/AT:P/PR:L/UI:N/VC:H/VI:N/VA:N/SC:N/SI:N/SA:N. Thanks Winston Crooker for reporting. |
| The Sprout Invoices WordPress plugin before 20.8.16 does not perform a capability or ownership check before allowing a private note to be overwritten through one of its AJAX actions, allowing any authenticated user such as a subscriber to overwrite private notes on records belonging to other users. |
