| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| CI4MS is a CodeIgniter 4-based CMS skeleton that delivers a production-ready, modular architecture with RBAC authorization and theme support. Prior to version 0.31.0.0, the application fails to immediately revoke active user sessions when an account is deleted. Due to a logic flaw in the backend design, account state changes are enforced only during authentication (login), not for already-established sessions. The system implicitly assumes that authenticated users remain trusted for the lifetime of their session. There is no session expiration or account expiration mechanism in place, causing deleted accounts to retain indefinite access until the user manually logs out. This behavior breaks the intended access control policy and results in persistent unauthorized access. This issue has been patched in version 0.31.0.0. |
| CI4MS is a CodeIgniter 4-based CMS skeleton that delivers a production-ready, modular architecture with RBAC authorization and theme support. Prior to version 0.31.0.0, the application fails to immediately revoke active user sessions when an account is deactivated. Due to a logic flaw in the backend design, account state changes are enforced only during authentication (login), not for already-established sessions. The system implicitly assumes that authenticated users remain trusted for the lifetime of their session. There is no session expiration or account expiration mechanism in place, causing deactivated accounts to retain indefinite access until the user manually logs out. This behavior breaks the intended access control policy and results in persistent unauthorized access, representing a critical security flaw. This issue has been patched in version 0.31.0.0. |
| IBM Aspera Shares 1.9.9 through 1.11.0 does not invalidate session after a password reset which could allow an authenticated user to impersonate another user on the system. |
| IBM Aspera Shares 1.9.9 through 1.11.0 is vulnerable to HTTP header injection, caused by improper validation of input by the HOST headers. This could allow an attacker to conduct various attacks against the vulnerable system, including cross-site scripting, cache poisoning or session hijacking. |
| A bug in POST request handling causes a crash under a certain condition.
This issue affects Apache Traffic Server: from 10.0.0 through 10.1.1, from 9.0.0 through 9.2.12.
Users are recommended to upgrade to version 10.1.2 or 9.2.13, which fix the issue.
A workaround for older versions is to set proxy.config.http.request_buffer_enabled to 0 (the default value is 0). |
| Signal K Server is a server application that runs on a central hub in a boat. Prior to version 2.24.0, SignalK Server contains a code-level vulnerability in its OIDC login and logout handlers where the unvalidated HTTP Host header is used to construct the OAuth2 redirect_uri. Because the redirectUri configuration is silently unset by default, an attacker can spoof the Host header to steal OAuth authorization codes and hijack user sessions in realistic deployments as The OIDC provider will then send the authorization code to whatever domain was injected. This issue has been patched in version 2.24.0. |
| In OpenSSH before 10.3, command execution can occur via shell metacharacters in a username within a command line. This requires a scenario where the username on the command line is untrusted, and also requires a non-default configurations of % in ssh_config. |
| OpenSSH before 10.3 can use unintended ECDSA algorithms. Listing of any ECDSA algorithm in PubkeyAcceptedAlgorithms or HostbasedAcceptedAlgorithms is misinterpreted to mean all ECDSA algorithms. |
| A flaw was found in OpenStack Keystone. This vulnerability allows remote authenticated users to bypass intended authorization restrictions. This occurs because OpenStack Keystone does not properly handle EC2 (Elastic Compute Cloud) tokens when a user's role has been removed from a tenant. An attacker can leverage a token associated with a removed user role to gain unauthorized access. |
| A vulnerability was found in insights-client. This security issue occurs because of insecure file operations or unsafe handling of temporary files and directories that lead to local privilege escalation. Before the insights-client has been registered on the system by root, an unprivileged local user or attacker could create the /var/tmp/insights-client directory (owning the directory with read, write, and execute permissions) on the system. After the insights-client is registered by root, an attacker could then control the directory content that insights are using by putting malicious scripts into it and executing arbitrary code as root (trivially bypassing SELinux protections because insights processes are allowed to disable SELinux system-wide). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: set ATTR_CTIME flags when setting mtime
David reported that the new warning from setattr_copy_mgtime is coming
like the following.
[ 113.215316] ------------[ cut here ]------------
[ 113.215974] WARNING: CPU: 1 PID: 31 at fs/attr.c:300 setattr_copy+0x1ee/0x200
[ 113.219192] CPU: 1 UID: 0 PID: 31 Comm: kworker/1:1 Not tainted 6.13.0-rc1+ #234
[ 113.220127] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[ 113.221530] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd]
[ 113.222220] RIP: 0010:setattr_copy+0x1ee/0x200
[ 113.222833] Code: 24 28 49 8b 44 24 30 48 89 53 58 89 43 6c 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 48 89 df e8 77 d6 ff ff e9 cd fe ff ff <0f> 0b e9 be fe ff ff 66 0
[ 113.225110] RSP: 0018:ffffaf218010fb68 EFLAGS: 00010202
[ 113.225765] RAX: 0000000000000120 RBX: ffffa446815f8568 RCX: 0000000000000003
[ 113.226667] RDX: ffffaf218010fd38 RSI: ffffa446815f8568 RDI: ffffffff94eb03a0
[ 113.227531] RBP: ffffaf218010fb90 R08: 0000001a251e217d R09: 00000000675259fa
[ 113.228426] R10: 0000000002ba8a6d R11: ffffa4468196c7a8 R12: ffffaf218010fd38
[ 113.229304] R13: 0000000000000120 R14: ffffffff94eb03a0 R15: 0000000000000000
[ 113.230210] FS: 0000000000000000(0000) GS:ffffa44739d00000(0000) knlGS:0000000000000000
[ 113.231215] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 113.232055] CR2: 00007efe0053d27e CR3: 000000000331a000 CR4: 00000000000006b0
[ 113.232926] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 113.233812] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 113.234797] Call Trace:
[ 113.235116] <TASK>
[ 113.235393] ? __warn+0x73/0xd0
[ 113.235802] ? setattr_copy+0x1ee/0x200
[ 113.236299] ? report_bug+0xf3/0x1e0
[ 113.236757] ? handle_bug+0x4d/0x90
[ 113.237202] ? exc_invalid_op+0x13/0x60
[ 113.237689] ? asm_exc_invalid_op+0x16/0x20
[ 113.238185] ? setattr_copy+0x1ee/0x200
[ 113.238692] btrfs_setattr+0x80/0x820 [btrfs]
[ 113.239285] ? get_stack_info_noinstr+0x12/0xf0
[ 113.239857] ? __module_address+0x22/0xa0
[ 113.240368] ? handle_ksmbd_work+0x6e/0x460 [ksmbd]
[ 113.240993] ? __module_text_address+0x9/0x50
[ 113.241545] ? __module_address+0x22/0xa0
[ 113.242033] ? unwind_next_frame+0x10e/0x920
[ 113.242600] ? __pfx_stack_trace_consume_entry+0x10/0x10
[ 113.243268] notify_change+0x2c2/0x4e0
[ 113.243746] ? stack_depot_save_flags+0x27/0x730
[ 113.244339] ? set_file_basic_info+0x130/0x2b0 [ksmbd]
[ 113.244993] set_file_basic_info+0x130/0x2b0 [ksmbd]
[ 113.245613] ? process_scheduled_works+0xbe/0x310
[ 113.246181] ? worker_thread+0x100/0x240
[ 113.246696] ? kthread+0xc8/0x100
[ 113.247126] ? ret_from_fork+0x2b/0x40
[ 113.247606] ? ret_from_fork_asm+0x1a/0x30
[ 113.248132] smb2_set_info+0x63f/0xa70 [ksmbd]
ksmbd is trying to set the atime and mtime via notify_change without also
setting the ctime. so This patch add ATTR_CTIME flags when setting mtime
to avoid a warning. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode
ath11k_hal_srng_* should be used with srng->lock to protect srng data.
For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(),
they use ath11k_hal_srng_* for many times but never call srng->lock.
So when running (full) monitor mode, warning will occur:
RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
Call Trace:
? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k]
? idr_alloc_u32+0x97/0xd0
ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k]
ath11k_dp_service_srng+0x289/0x5a0 [ath11k]
ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k]
__napi_poll+0x30/0x1f0
net_rx_action+0x198/0x320
__do_softirq+0xdd/0x319
So add srng->lock for them to avoid such warnings.
Inorder to fetch the srng->lock, should change srng's definition from
'void' to 'struct hal_srng'. And initialize them elsewhere to prevent
one line of code from being too long. This is consistent with other ring
process functions, such as ath11k_dp_process_rx().
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
ptr_ring: do not block hard interrupts in ptr_ring_resize_multiple()
Jakub added a lockdep_assert_no_hardirq() check in __page_pool_put_page()
to increase test coverage.
syzbot found a splat caused by hard irq blocking in
ptr_ring_resize_multiple() [1]
As current users of ptr_ring_resize_multiple() do not require
hard irqs being masked, replace it to only block BH.
Rename helpers to better reflect they are safe against BH only.
- ptr_ring_resize_multiple() to ptr_ring_resize_multiple_bh()
- skb_array_resize_multiple() to skb_array_resize_multiple_bh()
[1]
WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 __page_pool_put_page net/core/page_pool.c:709 [inline]
WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780
Modules linked in:
CPU: 1 UID: 0 PID: 9150 Comm: syz.1.1052 Not tainted 6.11.0-rc3-syzkaller-00202-gf8669d7b5f5d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:__page_pool_put_page net/core/page_pool.c:709 [inline]
RIP: 0010:page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780
Code: 74 0e e8 7c aa fb f7 eb 43 e8 75 aa fb f7 eb 3c 65 8b 1d 38 a8 6a 76 31 ff 89 de e8 a3 ae fb f7 85 db 74 0b e8 5a aa fb f7 90 <0f> 0b 90 eb 1d 65 8b 1d 15 a8 6a 76 31 ff 89 de e8 84 ae fb f7 85
RSP: 0018:ffffc9000bda6b58 EFLAGS: 00010083
RAX: ffffffff8997e523 RBX: 0000000000000000 RCX: 0000000000040000
RDX: ffffc9000fbd0000 RSI: 0000000000001842 RDI: 0000000000001843
RBP: 0000000000000000 R08: ffffffff8997df2c R09: 1ffffd40003a000d
R10: dffffc0000000000 R11: fffff940003a000e R12: ffffea0001d00040
R13: ffff88802e8a4000 R14: dffffc0000000000 R15: 00000000ffffffff
FS: 00007fb7aaf716c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa15a0d4b72 CR3: 00000000561b0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tun_ptr_free drivers/net/tun.c:617 [inline]
__ptr_ring_swap_queue include/linux/ptr_ring.h:571 [inline]
ptr_ring_resize_multiple_noprof include/linux/ptr_ring.h:643 [inline]
tun_queue_resize drivers/net/tun.c:3694 [inline]
tun_device_event+0xaaf/0x1080 drivers/net/tun.c:3714
notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93
call_netdevice_notifiers_extack net/core/dev.c:2032 [inline]
call_netdevice_notifiers net/core/dev.c:2046 [inline]
dev_change_tx_queue_len+0x158/0x2a0 net/core/dev.c:9024
do_setlink+0xff6/0x41f0 net/core/rtnetlink.c:2923
rtnl_setlink+0x40d/0x5a0 net/core/rtnetlink.c:3201
rtnetlink_rcv_msg+0x73f/0xcf0 net/core/rtnetlink.c:6647
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2550 |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-mem2mem: add lock to protect parameter num_rdy
Getting below error when using KCSAN to check the driver. Adding lock to
protect parameter num_rdy when getting the value with function:
v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready.
kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queue
kworker/u16:3: [name:report&]
kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7:
kworker/u16:3: v4l2_m2m_buf_queue+0xd8/0x10c |
| mppx is a TypeScript interface for machine payments protocol. Prior to version 0.4.11, the stripe/charge payment method did not check Stripe's Idempotent-Replayed response header when creating PaymentIntents. An attacker could replay a valid credential containing the same spt token against a new challenge, and the server would accept the replayed Stripe PaymentIntent as a new successful payment without actually charging the customer again. This allowed an attacker to pay once and consume unlimited resources by replaying the credential. This issue has been patched in version 0.4.11. |
| In Search Guard FLX up to version 4.0.1, it is possible to use specially crafted requests to redirect the user to an untrusted URL. |
| Discourse is an open-source discussion platform. From versions 2026.1.0-latest to before 2026.1.3, 2026.2.0-latest to before 2026.2.2, and 2026.3.0-latest to before 2026.3.0, the enter action in StaticController reads the sso_destination_url cookie and redirects to it with allow_other_host: true without validating the destination URL. While this cookie is normally set during legitimate DiscourseConnect Provider flows with cryptographically validated SSO payloads, cookies are client-controlled and can be set by attackers. This issue has been patched in versions 2026.1.3, 2026.2.2, and 2026.3.0. |
| A vulnerability was identified in SourceCodester Leave Application System 1.0. Impacted is an unknown function of the file /index.php?page=manage_user of the component User Information Handler. Such manipulation of the argument ID leads to authorization bypass. The attack can be executed remotely. The exploit is publicly available and might be used. |
| A vulnerability in Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected SSM On-Prem host.
This vulnerability is due to the unintentional exposure of an internal service. An attacker could exploit this vulnerability by sending a crafted request to the API of the exposed service. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges. |
| A writer role user in an attacker-controlled namespace could signal, delete, and reset workflows or activities in a victim namespace on the same cluster. Exploitation requires the attacker to know or guess specific victim workflow ID(s) and, for signal operations, signal names. This was due to a bug introduced in Temporal Server v1.29.0 which inadvertently allowed an attacker to control the namespace name value instead of using the server's own trusted name value within the batch activity code. The batch activity validated the namespace ID but did not cross-check the namespace name against the worker's bound namespace, allowing the per-namespace worker's privileged credentials to operate on an arbitrary namespace. Exploitation requires a server configuration where internal components have cross-namespace authorization, such as deployment of the internal-frontend service or equivalent TLS-based authorization for internal identities.
This vulnerability also impacted Temporal Cloud when the attacker and victim namespaces were on the same cell, with the same preconditions as self-hosted clusters. |
