| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix memory leak in exfat_load_bitmap()
If the first directory entry in the root directory is not a bitmap
directory entry, 'bh' will not be released and reassigned, which
will cause a memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: Avoid a bad reference count on CPU node
In the parse_perf_domain function, if the call to
of_parse_phandle_with_args returns an error, then the reference to the
CPU device node that was acquired at the start of the function would not
be properly decremented.
Address this by declaring the variable with the __free(device_node)
cleanup attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: don't WARN for racy path_noexec check
Both i_mode and noexec checks wrapped in WARN_ON stem from an artifact
of the previous implementation. They used to legitimately check for the
condition, but that got moved up in two commits:
633fb6ac3980 ("exec: move S_ISREG() check earlier")
0fd338b2d2cd ("exec: move path_noexec() check earlier")
Instead of being removed said checks are WARN_ON'ed instead, which
has some debug value.
However, the spurious path_noexec check is racy, resulting in
unwarranted warnings should someone race with setting the noexec flag.
One can note there is more to perm-checking whether execve is allowed
and none of the conditions are guaranteed to still hold after they were
tested for.
Additionally this does not validate whether the code path did any perm
checking to begin with -- it will pass if the inode happens to be
regular.
Keep the redundant path_noexec() check even though it's mindless
nonsense checking for guarantee that isn't given so drop the WARN.
Reword the commentary and do small tidy ups while here.
[brauner: keep redundant path_noexec() check] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext()
Replace one-element array with a flexible-array member in
`struct host_cmd_ds_802_11_scan_ext`.
With this, fix the following warning:
elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------
elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1)
elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex] |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: asihpi: Fix potential OOB array access
ASIHPI driver stores some values in the static array upon a response
from the driver, and its index depends on the firmware. We shouldn't
trust it blindly.
This patch adds a sanity check of the array index to fit in the array
size. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix i_data_sem unlock order in ext4_ind_migrate()
Fuzzing reports a possible deadlock in jbd2_log_wait_commit.
This issue is triggered when an EXT4_IOC_MIGRATE ioctl is set to require
synchronous updates because the file descriptor is opened with O_SYNC.
This can lead to the jbd2_journal_stop() function calling
jbd2_might_wait_for_commit(), potentially causing a deadlock if the
EXT4_IOC_MIGRATE call races with a write(2) system call.
This problem only arises when CONFIG_PROVE_LOCKING is enabled. In this
case, the jbd2_might_wait_for_commit macro locks jbd2_handle in the
jbd2_journal_stop function while i_data_sem is locked. This triggers
lockdep because the jbd2_journal_start function might also lock the same
jbd2_handle simultaneously.
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
Rule: add |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix system hang while resume with TBT monitor
[Why]
Connected with a Thunderbolt monitor and do the suspend and the system
may hang while resume.
The TBT monitor HPD will be triggered during the resume procedure
and call the drm_client_modeset_probe() while
struct drm_connector connector->dev->master is NULL.
It will mess up the pipe topology after resume.
[How]
Skip the TBT monitor HPD during the resume procedure because we
currently will probe the connectors after resume by default.
(cherry picked from commit 453f86a26945207a16b8f66aaed5962dc2b95b85) |
| In the Linux kernel, the following vulnerability has been resolved:
static_call: Handle module init failure correctly in static_call_del_module()
Module insertion invokes static_call_add_module() to initialize the static
calls in a module. static_call_add_module() invokes __static_call_init(),
which allocates a struct static_call_mod to either encapsulate the built-in
static call sites of the associated key into it so further modules can be
added or to append the module to the module chain.
If that allocation fails the function returns with an error code and the
module core invokes static_call_del_module() to clean up eventually added
static_call_mod entries.
This works correctly, when all keys used by the module were converted over
to a module chain before the failure. If not then static_call_del_module()
causes a #GP as it blindly assumes that key::mods points to a valid struct
static_call_mod.
The problem is that key::mods is not a individual struct member of struct
static_call_key, it's part of a union to save space:
union {
/* bit 0: 0 = mods, 1 = sites */
unsigned long type;
struct static_call_mod *mods;
struct static_call_site *sites;
};
key::sites is a pointer to the list of built-in usage sites of the static
call. The type of the pointer is differentiated by bit 0. A mods pointer
has the bit clear, the sites pointer has the bit set.
As static_call_del_module() blidly assumes that the pointer is a valid
static_call_mod type, it fails to check for this failure case and
dereferences the pointer to the list of built-in call sites, which is
obviously bogus.
Cure it by checking whether the key has a sites or a mods pointer.
If it's a sites pointer then the key is not to be touched. As the sites are
walked in the same order as in __static_call_init() the site walk can be
terminated because all subsequent sites have not been touched by the init
code due to the error exit.
If it was converted before the allocation fail, then the inner loop which
searches for a module match will find nothing.
A fail in the second allocation in __static_call_init() is harmless and
does not require special treatment. The first allocation succeeded and
converted the key to a module chain. That first entry has mod::mod == NULL
and mod::next == NULL, so the inner loop of static_call_del_module() will
neither find a module match nor a module chain. The next site in the walk
was either already converted, but can't match the module, or it will exit
the outer loop because it has a static_call_site pointer and not a
static_call_mod pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix error path in multi-packet WQE transmit
Remove the erroneous unmap in case no DMA mapping was established
The multi-packet WQE transmit code attempts to obtain a DMA mapping for
the skb. This could fail, e.g. under memory pressure, when the IOMMU
driver just can't allocate more memory for page tables. While the code
tries to handle this in the path below the err_unmap label it erroneously
unmaps one entry from the sq's FIFO list of active mappings. Since the
current map attempt failed this unmap is removing some random DMA mapping
that might still be required. If the PCI function now presents that IOVA,
the IOMMU may assumes a rogue DMA access and e.g. on s390 puts the PCI
function in error state.
The erroneous behavior was seen in a stress-test environment that created
memory pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix NULL deref in mlx5e_tir_builder_alloc()
In mlx5e_tir_builder_alloc() kvzalloc() may return NULL
which is dereferenced on the next line in a reference
to the modify field.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| MONGO and ZigBee TLV dissector infinite loops in Wireshark 4.2.0 to 4.2.4, 4.0.0 to 4.0.14, and 3.6.0 to 3.6.22 allow denial of service via packet injection or crafted capture file |
| Memory handling issue in editcap could cause denial of service via crafted capture file |
| Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause
memory to be accessed that was previously freed in some situations
Impact summary: A use after free can have a range of potential consequences such
as the corruption of valid data, crashes or execution of arbitrary code.
However, only applications that directly call the SSL_free_buffers function are
affected by this issue. Applications that do not call this function are not
vulnerable. Our investigations indicate that this function is rarely used by
applications.
The SSL_free_buffers function is used to free the internal OpenSSL buffer used
when processing an incoming record from the network. The call is only expected
to succeed if the buffer is not currently in use. However, two scenarios have
been identified where the buffer is freed even when still in use.
The first scenario occurs where a record header has been received from the
network and processed by OpenSSL, but the full record body has not yet arrived.
In this case calling SSL_free_buffers will succeed even though a record has only
been partially processed and the buffer is still in use.
The second scenario occurs where a full record containing application data has
been received and processed by OpenSSL but the application has only read part of
this data. Again a call to SSL_free_buffers will succeed even though the buffer
is still in use.
While these scenarios could occur accidentally during normal operation a
malicious attacker could attempt to engineer a stituation where this occurs.
We are not aware of this issue being actively exploited.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: lantiq_etop: fix memory disclosure
When applying padding, the buffer is not zeroed, which results in memory
disclosure. The mentioned data is observed on the wire. This patch uses
skb_put_padto() to pad Ethernet frames properly. The mentioned function
zeroes the expanded buffer.
In case the packet cannot be padded it is silently dropped. Statistics
are also not incremented. This driver does not support statistics in the
old 32-bit format or the new 64-bit format. These will be added in the
future. In its current form, the patch should be easily backported to
stable versions.
Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets
in hardware, so software padding must be applied. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/stm: Avoid use-after-free issues with crtc and plane
ltdc_load() calls functions drm_crtc_init_with_planes(),
drm_universal_plane_init() and drm_encoder_init(). These functions
should not be called with parameters allocated with devm_kzalloc()
to avoid use-after-free issues [1].
Use allocations managed by the DRM framework.
Found by Linux Verification Center (linuxtesting.org).
[1]
https://lore.kernel.org/lkml/u366i76e3qhh3ra5oxrtngjtm2u5lterkekcz6y2jkndhuxzli@diujon4h7qwb/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: amdkfd_free_gtt_mem clear the correct pointer
Pass pointer reference to amdgpu_bo_unref to clear the correct pointer,
otherwise amdgpu_bo_unref clear the local variable, the original pointer
not set to NULL, this could cause use-after-free bug. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().
When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
In case there is any sort of clock controller attached to this I2C bus
controller, for example Versaclock or even an AIC32x4 I2C codec, then
an I2C transfer triggered from the clock controller clk_ops .prepare
callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex.
This is because the clock controller first grabs the prepare_lock mutex
and then performs the prepare operation, including its I2C access. The
I2C access resumes this I2C bus controller via .runtime_resume callback,
which calls clk_prepare_enable(), which attempts to grab the prepare_lock
mutex again and deadlocks.
Since the clock are already prepared since probe() and unprepared in
remove(), use simple clk_enable()/clk_disable() calls to enable and
disable the clock on runtime suspend and resume, to avoid hitting the
prepare_lock mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: drop ppath from ext4_ext_replay_update_ex() to avoid double-free
When calling ext4_force_split_extent_at() in ext4_ext_replay_update_ex(),
the 'ppath' is updated but it is the 'path' that is freed, thus potentially
triggering a double-free in the following process:
ext4_ext_replay_update_ex
ppath = path
ext4_force_split_extent_at(&ppath)
ext4_split_extent_at
ext4_ext_insert_extent
ext4_ext_create_new_leaf
ext4_ext_grow_indepth
ext4_find_extent
if (depth > path[0].p_maxdepth)
kfree(path) ---> path First freed
*orig_path = path = NULL ---> null ppath
kfree(path) ---> path double-free !!!
So drop the unnecessary ppath and use path directly to avoid this problem.
And use ext4_find_extent() directly to update path, avoiding unnecessary
memory allocation and freeing. Also, propagate the error returned by
ext4_find_extent() instead of using strange error codes. |
| In the Linux kernel, the following vulnerability has been resolved:
aoe: fix the potential use-after-free problem in more places
For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential
use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put()
instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs
into use-after-free.
Then Nicolai Stange found more places in aoe have potential use-after-free
problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe()
and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push
packet to tx queue. So they should also use dev_hold() to increase the
refcnt of skb->dev.
On the other hand, moving dev_put() to tx() causes that the refcnt of
skb->dev be reduced to a negative value, because corresponding
dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(),
probe(), and aoecmd_cfg_rsp(). This patch fixed this issue. |
