| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell WMS 3.6.1 and below contains a Path Traversal vulnerability in Device API. A remote attacker could potentially exploit this vulnerability, to gain unauthorized read access to the files stored on the server filesystem, with the privileges of the running web application. |
| A path traversal vulnerability was identified in GitHub Enterprise Server management console that allowed the bypass of CSRF protections. This could potentially lead to privilege escalation. To exploit this vulnerability, an attacker would need to target a user that was actively logged into the management console. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.5 and was fixed in versions 3.1.19, 3.2.11, 3.3.6, 3.4.1. This vulnerability was reported via the GitHub Bug Bounty program. |
| MobiSoft - MobiPlus User Take Over and Improper Handling of url Parameters Attacker can navigate to specific url which will expose all the users and password in clear text. http://IP/MobiPlusWeb/Handlers/MainHandler.ashx?MethodName=GridData&GridName=Users |
| A post-authentication arbitrary file read vulnerability impacting end-of-life Secure Remote Access (SRA) products and older firmware versions of Secure Mobile Access (SMA) 100 series products, specifically the SRA appliances running all 8.x, 9.0.0.5-19sv and earlier versions and Secure Mobile Access (SMA) 100 series products running older firmware 9.0.0.9-26sv and earlier versions |
| A vulnerability in Handling of Undefined Values in the routing protocol daemon (RPD) process of Juniper Networks Junos OS and Junos OS Evolved may allow an unauthenticated network-based attacker to crash the RPD process by sending a specific BGP update while the system is under heavy load, leading to a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. Malicious exploitation of this issue requires a very specific combination of load, timing, and configuration of the vulnerable system which is beyond the direct control of the attacker. Internal reproduction has only been possible through artificially created load and specially instrumented source code. Systems are only vulnerable to this issue if BGP multipath is enabled. Routers not configured for BGP multipath are not vulnerable to this issue. This issue affects: Juniper Networks Junos OS: 21.1 versions prior to 21.1R3-S1; 21.2 versions prior to 21.2R2-S2, 21.2R3; 21.3 versions prior to 21.3R2, 21.3R3; 21.4 versions prior to 21.4R1-S1, 21.4R2. Juniper Networks Junos OS Evolved: 21.1 versions prior to 21.1R3-S1-EVO; 21.2 version 21.2R1-EVO and later versions; 21.3 versions prior to 21.3R3-EVO; 21.4 versions prior to 21.4R1-S1-EVO, 21.4R2-EVO. This issue does not affect: Juniper Networks Junos OS versions prior to 21.1. Juniper Networks Junos OS Evolved versions prior to 21.1-EVO. |
| Path traversal vulnerability exists in CAMS for HIS Server contained in the following Yokogawa Electric products: CENTUM CS 3000 versions from R3.08.10 to R3.09.00, CENTUM VP versions from R4.01.00 to R4.03.00, from R5.01.00 to R5.04.20, and from R6.01.00 to R6.08.00, Exaopc versions from R3.72.00 to R3.79.00. |
| There is a path traversal vulnerability in CAMS for HIS Log Server contained in the following Yokogawa Electric products: CENTUM CS 3000 versions from R3.08.10 to R3.09.00, CENTUM VP versions from R4.01.00 to R4.03.00, from R5.01.00 to R5.04.20, andfrom R6.01.00 to R6.08.00, Exaopc versions from R3.72.00 to R3.79.00. |
| A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z3 Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit this vulnerability by crafting a malicious request and sending it to the affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to crash and restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and re-authenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention. Cisco Meraki has released software updates that address this vulnerability. |
| A vulnerability in Cisco Nexus Dashboard could allow an authenticated, remote attacker to write arbitrary files on an affected device. This vulnerability is due to insufficient input validation in the web-based management interface of Cisco Nexus Dashboard. An attacker with Administrator credentials could exploit this vulnerability by uploading a crafted file. A successful exploit could allow the attacker to overwrite arbitrary files on an affected device. |
| A vulnerability in the web-based management interface of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to read arbitrary files on the underlying operating system of an affected device. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request that contains directory traversal character sequences to an affected system. A successful exploit could allow the attacker to access sensitive files on the operating system. |
| A vulnerability in the CLI parser of Cisco FirePOWER Software for Adaptive Security Appliance (ASA) FirePOWER module could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected ASA FirePOWER module as the root user. This vulnerability is due to improper handling of undefined command parameters. An attacker could exploit this vulnerability by using a crafted command on the CLI or by submitting a crafted HTTPS request to the web-based management interface of the Cisco ASA that is hosting the ASA FirePOWER module. Note: To exploit this vulnerability, the attacker must have administrative access to the Cisco ASA. A user who has administrative access to a particular Cisco ASA is also expected to have administrative access to the ASA FirePOWER module that is hosted by that Cisco ASA. |
| A vulnerability in the web-based management interface of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to read arbitrary files from the underlying operating system. This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request that contains directory traversal character sequences to an affected system. A successful exploit could allow the attacker to access sensitive files on the underlying operating system. |
| Multiple vulnerabilities in the API and web-based management interfaces of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker with read/write privileges to the application to write files or execute arbitrary code on the underlying operating system of an affected device as the root user. For more information about these vulnerabilities, see the Details section of this advisory. |
| Multiple vulnerabilities in the API and web-based management interfaces of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker with read/write privileges to the application to write files or execute arbitrary code on the underlying operating system of an affected device as the root user. For more information about these vulnerabilities, see the Details section of this advisory. |
| Pandora FMS v7.0NG.760 and below allows a relative path traversal in File Manager where a privileged user could upload a .php file outside the intended images directory which is restricted to execute the .php file. The impact could lead to a Remote Code Execution with running application privilege. |
| mySCADA myDESIGNER Versions 8.20.0 and prior fails to properly validate contents of an imported project file, which may make the product vulnerable to a path traversal payload. This vulnerability may allow an attacker to plant files on the file system in arbitrary locations or overwrite existing files, resulting in remote code execution. |
| The GOautodial API prior to commit 3c3a979 made on October 13th, 2021 takes a user-supplied “action” parameter and appends a .php file extension to locate and load the correct PHP file to implement the API call. Vulnerable versions of GOautodial do not sanitize the user input that specifies the action. This permits an attacker to execute any PHP source file with a .php extension that is present on the disk and readable by the GOautodial web server process. Combined with CVE-2021-43175, it is possible for the attacker to do this without valid credentials. CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C |
| OpenOlat is a web-basedlearning management system. A path traversal vulnerability exists in OpenOlat prior to versions 15.5.12 and 16.0.5. By providing a filename that contains a relative path as a parameter in some REST methods, it is possible to create directory structures and write files anywhere on the target system. The attack could be used to write files anywhere in the web root folder or outside, depending on the configuration of the system and the properly configured permission of the application server user. The attack requires an OpenOlat user account, an enabled REST API and the rights on a business object to call the vulnerable REST calls. The problem is fixed in version 15.5.12 and 16.0.5. There is a workaround available. The vulnerability requires the REST module to be enabled. Disabling the REST module or limiting the REST module via some firewall or web-server access rules to be accessed only be trusted systems will mitigate the risk. |
| Nextcloud is an open-source, self-hosted productivity platform. Prior to versions 20.0.13, 21.0.5, and 22.2.0, a file traversal vulnerability makes an attacker able to download arbitrary SVG images from the host system, including user provided files. This could also be leveraged into a XSS/phishing attack, an attacker could upload a malicious SVG file that mimics the Nextcloud login form and send a specially crafted link to victims. The XSS risk here is mitigated due to the fact that Nextcloud employs a strict Content-Security-Policy disallowing execution of arbitrary JavaScript. It is recommended that the Nextcloud Server be upgraded to 20.0.13, 21.0.5 or 22.2.0. There are no known workarounds aside from upgrading. |
| OpenOlat is a web-based e-learning platform for teaching, learning, assessment and communication, an LMS, a learning management system. In affected versions by manipulating the HTTP request an attacker can modify the path of a requested file download in the folder component to point to anywhere on the target system. The attack could be used to read any file accessible in the web root folder or outside, depending on the configuration of the system and the properly configured permission of the application server user. The attack requires an OpenOlat user account or the enabled guest user feature together with the usage of the folder component in a course. The attack does not allow writing of arbitrary files, it allows only reading of files and also only ready of files that the attacker knows the exact path which is very unlikely at least for OpenOlat data files. The problem is fixed in version 15.5.8 and 16.0.1 It is advised to upgrade to version 16.0.x. There are no known workarounds to fix this problem, an upgrade is necessary. |
