| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Multiple Cisco products are affected by a vulnerability in the Snort Intrusion Prevention System (IPS) rule engine that could allow an unauthenticated, remote attacker to bypass the configured rules on an affected system. This vulnerability is due to incorrect HTTP packet handling. An attacker could exploit this vulnerability by sending crafted HTTP packets through an affected device. A successful exploit could allow the attacker to bypass configured IPS rules and allow uninspected traffic onto the network. |
| A vulnerability in the remote access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct a brute force attack in an attempt to identify valid username and password combinations or an authenticated, remote attacker to establish a clientless SSL VPN session with an unauthorized user.
This vulnerability is due to improper separation of authentication, authorization, and accounting (AAA) between the remote access VPN feature and the HTTPS management and site-to-site VPN features. An attacker could exploit this vulnerability by specifying a default connection profile/tunnel group while conducting a brute force attack or while establishing a clientless SSL VPN session using valid credentials. A successful exploit could allow the attacker to achieve one or both of the following:
Identify valid credentials that could then be used to establish an unauthorized remote access VPN session.
Establish a clientless SSL VPN session (only when running Cisco ASA Software Release 9.16 or earlier).
Notes:
Establishing a client-based remote access VPN tunnel is not possible as these default connection profiles/tunnel groups do not and cannot have an IP address pool configured.
This vulnerability does not allow an attacker to bypass authentication. To successfully establish a remote access VPN session, valid credentials are required, including a valid second factor if multi-factor authentication (MFA) is configured.
Cisco will release software updates that address this vulnerability. There are workarounds that address this vulnerability. |
| A vulnerability in the Open Shortest Path First (OSPF) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper memory protection mechanisms while processing certain OSPF packets. An attacker could exploit this vulnerability by sending a series of malformed OSPF packets in a short period of time to an affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition for client traffic that is traversing the device. |
| A vulnerability in the Transport Layer Security version 1.3 (TLS 1.3) policy with URL category functionality for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured TLS 1.3 policy to block traffic for a specific URL. The vulnerability is due to a logic error with Snort handling of the connection with the TLS 1.3 policy and URL category configuration. An attacker could exploit this vulnerability by sending crafted TLS 1.3 connections to an affected device. A successful exploit could allow the attacker to bypass the TLS 1.3 policy and access URLs that are outside the affected device and normally would be dropped. |
| A vulnerability in the Secure Sockets Layer (SSL)/Transport Layer Security (TLS) handler of Cisco Firepower Threat Defense (FTD) Software when running on the Cisco Firepower 1000 Series platform could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to a communication error between internal functions. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause a buffer underrun, which leads to a crash. The crash causes the affected device to reload. |
| Multiple vulnerabilities in the Media Gateway Control Protocol (MGCP) inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerabilities are due to inefficient memory management. An attacker could exploit these vulnerabilities by sending crafted MGCP packets through an affected device. An exploit could allow the attacker to cause memory exhaustion resulting in a restart of an affected device, causing a DoS condition for traffic traversing the device. |
| Multiple vulnerabilities in the Server Message Block Version 2 (SMB2) processor of the Snort detection engine on multiple Cisco products could allow an unauthenticated, remote attacker to bypass the configured policies or cause a denial of service (DoS) condition on an affected device.
These vulnerabilities are due to improper management of system resources when the Snort detection engine is processing SMB2 traffic. An attacker could exploit these vulnerabilities by sending a high rate of certain types of SMB2 packets through an affected device. A successful exploit could allow the attacker to trigger a reload of the Snort process, resulting in a DoS condition.
Note: When the snort preserve-connection option is enabled for the Snort detection engine, a successful exploit could also allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. The snort preserve-connection setting is enabled by default. See the Details ["#details"] section of this advisory for more information.
Note: Only products that have Snort 3 configured are affected. Products that are configured with Snort 2 are not affected. |
| A vulnerability in the SSL/TLS client of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper memory management when a device initiates SSL/TLS connections. An attacker could exploit this vulnerability by ensuring that the device will connect to an SSL/TLS server that is using specific encryption parameters. A successful exploit could allow the attacker to cause the affected device to unexpectedly reload, resulting in a DoS condition. |
| A vulnerability in the activation of an access control list (ACL) on Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the protection that is offered by a configured ACL on an affected device. This vulnerability is due to a logic error that occurs when an ACL changes from inactive to active in the running configuration of an affected device. An attacker could exploit this vulnerability by sending traffic through the affected device that should be denied by the configured ACL. The reverse condition is also true—traffic that should be permitted could be denied by the configured ACL. A successful exploit could allow the attacker to bypass configured ACL protections on the affected device, allowing the attacker to access trusted networks that the device might be protecting. Note: This vulnerability applies to both IPv4 and IPv6 traffic as well as dual-stack ACL configurations in which both IPv4 and IPv6 ACLs are configured on an interface. |
| A vulnerability in the OSPF protocol of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. If OSPF authentication is enabled, the attacker must know the secret key to exploit this vulnerability.
This vulnerability is due to insufficient input validation when processing OSPF update packets. An attacker could exploit this vulnerability by sending crafted OSPF update packets. A successful exploit could allow the attacker to create a buffer overflow, causing the affected device to reload, resulting in a DoS condition. |
| A vulnerability in the management web server of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker with high privileges to execute configuration commands on an affected system.
This vulnerability exists because access to HTTPS endpoints is not properly restricted on an affected device. An attacker could exploit this vulnerability by sending specific messages to the affected HTTPS handler. A successful exploit could allow the attacker to perform configuration changes on the affected system, which should be configured and managed only through Cisco Firepower Management Center (FMC) Software. |
| A vulnerability in the TLS handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain access to sensitive information.
This vulnerability is due to improper implementation of countermeasures against a Bleichenbacher attack on a device that uses SSL decryption policies. An attacker could exploit this vulnerability by sending crafted TLS messages to an affected device, which would act as an oracle and allow the attacker to carry out a chosen-ciphertext attack. A successful exploit could allow the attacker to perform cryptanalytic operations that may allow decryption of previously captured TLS sessions to the affected device. |
| A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software and Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root.
This vulnerability is due to improper input validation for specific CLI commands. An attacker could exploit this vulnerability by injecting operating system commands into a legitimate command. A successful exploit could allow the attacker to escape the restricted command prompt and execute arbitrary commands on the underlying operating system. To successfully exploit this vulnerability, an attacker would need valid Administrator credentials. |
| A vulnerability in the processing of SSH connections of Cisco Firepower Management Center (FMC) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, resulting in a reboot on the affected device. |
| A vulnerability in the Remote Access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper validation of client key data after the TLS session is established. An attacker could exploit this vulnerability by sending a crafted key value to an affected system over the secure TLS session. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper data validation during the TLS 1.3 handshake. An attacker could exploit this vulnerability by sending a crafted TLS 1.3 packet to an affected system through a TLS 1.3-enabled listening socket. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Note: This vulnerability can also impact the integrity of a device by causing VPN HostScan communication failures or file transfer failures when Cisco ASA Software is upgraded using Cisco Adaptive Security Device Manager (ASDM). |
| A vulnerability in the Dynamic Access Policies (DAP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause an affected device to reload unexpectedly. To exploit this vulnerability, an attacker would need valid remote access VPN user credentials on the affected device.
This vulnerability is due to improper validation of data in HTTPS POST requests. An attacker could exploit this vulnerability by sending a crafted HTTPS POST request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. |
| A vulnerability in the SSL VPN feature for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to a logic error in memory management when the device is handling SSL VPN connections. An attacker could exploit this vulnerability by sending crafted SSL/TLS packets to the SSL VPN server of the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the Network Service Group (NSG) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should be denied to flow through an affected device.
This vulnerability is due to a logic error that occurs when NSG ACLs are populated on an affected device. An attacker could exploit this vulnerability by establishing a connection to the affected device. A successful exploit could allow the attacker to bypass configured ACL rules. |
| A vulnerability in the remote access SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to bypass a configured multiple certificate authentication policy and connect using only a valid username and password. This vulnerability is due to improper error handling during remote access VPN authentication. An attacker could exploit this vulnerability by sending crafted requests during remote access VPN session establishment. A successful exploit could allow the attacker to bypass the configured multiple certificate authentication policy while retaining the privileges and permissions associated with the original connection profile. |
