| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: Switch to device-managed dmam_alloc_coherent()
Using the device-managed version allows to simplify clean-up in probe()
error path.
Additionally, this device-managed ensures proper cleanup, which helps to
resolve memory errors, page faults, btrfs going read-only, and btrfs
disk corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: dp83869: fix memory corruption when enabling fiber
When configuring the fiber port, the DP83869 PHY driver incorrectly
calls linkmode_set_bit() with a bit mask (1 << 10) rather than a bit
number (10). This corrupts some other memory location -- in case of
arm64 the priv pointer in the same structure.
Since the advertising flags are updated from supported at the end of the
function the incorrect line isn't needed at all and can be removed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Stop the active perfmon before being destroyed
Upon closing the file descriptor, the active performance monitor is not
stopped. Although all perfmons are destroyed in `vc4_perfmon_close_file()`,
the active performance monitor's pointer (`vc4->active_perfmon`) is still
retained.
If we open a new file descriptor and submit a few jobs with performance
monitors, the driver will attempt to stop the active performance monitor
using the stale pointer in `vc4->active_perfmon`. However, this pointer
is no longer valid because the previous process has already terminated,
and all performance monitors associated with it have been destroyed and
freed.
To fix this, when the active performance monitor belongs to a given
process, explicitly stop it before destroying and freeing it. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: handle consistently DSS corruption
Bugged peer implementation can send corrupted DSS options, consistently
hitting a few warning in the data path. Use DEBUG_NET assertions, to
avoid the splat on some builds and handle consistently the error, dumping
related MIBs and performing fallback and/or reset according to the
subflow type. |
| In the Linux kernel, the following vulnerability has been resolved:
secretmem: disable memfd_secret() if arch cannot set direct map
Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). This
is the case for example on some arm64 configurations, where marking 4k
PTEs in the direct map not present can only be done if the direct map is
set up at 4k granularity in the first place (as ARM's break-before-make
semantics do not easily allow breaking apart large/gigantic pages).
More precisely, on arm64 systems with !can_set_direct_map(),
set_direct_map_invalid_noflush() is a no-op, however it returns success
(0) instead of an error. This means that memfd_secret will seemingly
"work" (e.g. syscall succeeds, you can mmap the fd and fault in pages),
but it does not actually achieve its goal of removing its memory from the
direct map.
Note that with this patch, memfd_secret() will start erroring on systems
where can_set_direct_map() returns false (arm64 with
CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and
CONFIG_KFENCE=n), but that still seems better than the current silent
failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most
arm64 systems actually have a working memfd_secret() and aren't be
affected.
From going through the iterations of the original memfd_secret patch
series, it seems that disabling the syscall in these scenarios was the
intended behavior [1] (preferred over having
set_direct_map_invalid_noflush return an error as that would result in
SIGBUSes at page-fault time), however the check for it got dropped between
v16 [2] and v17 [3], when secretmem moved away from CMA allocations.
[1]: https://lore.kernel.org/lkml/20201124164930.GK8537@kernel.org/
[2]: https://lore.kernel.org/lkml/20210121122723.3446-11-rppt@kernel.org/#t
[3]: https://lore.kernel.org/lkml/20201125092208.12544-10-rppt@kernel.org/ |
| In the Linux kernel, the following vulnerability has been resolved:
media: qcom: camss: Remove use_count guard in stop_streaming
The use_count check was introduced so that multiple concurrent Raw Data
Interfaces RDIs could be driven by different virtual channels VCs on the
CSIPHY input driving the video pipeline.
This is an invalid use of use_count though as use_count pertains to the
number of times a video entity has been opened by user-space not the number
of active streams.
If use_count and stream-on count don't agree then stop_streaming() will
break as is currently the case and has become apparent when using CAMSS
with libcamera's released softisp 0.3.
The use of use_count like this is a bit hacky and right now breaks regular
usage of CAMSS for a single stream case. Stopping qcam results in the splat
below, and then it cannot be started again and any attempts to do so fails
with -EBUSY.
[ 1265.509831] WARNING: CPU: 5 PID: 919 at drivers/media/common/videobuf2/videobuf2-core.c:2183 __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common]
...
[ 1265.510630] Call trace:
[ 1265.510636] __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common]
[ 1265.510648] vb2_core_streamoff+0x24/0xcc [videobuf2_common]
[ 1265.510660] vb2_ioctl_streamoff+0x5c/0xa8 [videobuf2_v4l2]
[ 1265.510673] v4l_streamoff+0x24/0x30 [videodev]
[ 1265.510707] __video_do_ioctl+0x190/0x3f4 [videodev]
[ 1265.510732] video_usercopy+0x304/0x8c4 [videodev]
[ 1265.510757] video_ioctl2+0x18/0x34 [videodev]
[ 1265.510782] v4l2_ioctl+0x40/0x60 [videodev]
...
[ 1265.510944] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 0 in active state
[ 1265.511175] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 1 in active state
[ 1265.511398] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 2 in active st
One CAMSS specific way to handle multiple VCs on the same RDI might be:
- Reference count each pipeline enable for CSIPHY, CSID, VFE and RDIx.
- The video buffers are already associated with msm_vfeN_rdiX so
release video buffers when told to do so by stop_streaming.
- Only release the power-domains for the CSIPHY, CSID and VFE when
their internal refcounts drop.
Either way refusing to release video buffers based on use_count is
erroneous and should be reverted. The silicon enabling code for selecting
VCs is perfectly fine. Its a "known missing feature" that concurrent VCs
won't work with CAMSS right now.
Initial testing with this code didn't show an error but, SoftISP and "real"
usage with Google Hangouts breaks the upstream code pretty quickly, we need
to do a partial revert and take another pass at VCs.
This commit partially reverts commit 89013969e232 ("media: camss: sm8250:
Pipeline starting and stopping for multiple virtual channels") |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix race when converting group handle to group object
XArray provides it's own internal lock which protects the internal array
when entries are being simultaneously added and removed. However there
is still a race between retrieving the pointer from the XArray and
incrementing the reference count.
To avoid this race simply hold the internal XArray lock when
incrementing the reference count, this ensures there cannot be a racing
call to xa_erase(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix access to uninitialized variable in tick_ctx_cleanup()
The group variable can't be used to retrieve ptdev in our second loop,
because it points to the previously iterated list_head, not a valid
group. Get the ptdev object from the scheduler instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix potential memory leak in bcmasp_xmit()
The bcmasp_xmit() returns NETDEV_TX_OK without freeing skb
in case of mapping fails, add dev_kfree_skb() to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve param->string when parsing mount options
In bpf_parse_param(), keep the value of param->string intact so it can
be freed later. Otherwise, the kmalloc area pointed to by param->string
will be leaked as shown below:
unreferenced object 0xffff888118c46d20 (size 8):
comm "new_name", pid 12109, jiffies 4295580214
hex dump (first 8 bytes):
61 6e 79 00 38 c9 5c 7e any.8.\~
backtrace (crc e1b7f876):
[<00000000c6848ac7>] kmemleak_alloc+0x4b/0x80
[<00000000de9f7d00>] __kmalloc_node_track_caller_noprof+0x36e/0x4a0
[<000000003e29b886>] memdup_user+0x32/0xa0
[<0000000007248326>] strndup_user+0x46/0x60
[<0000000035b3dd29>] __x64_sys_fsconfig+0x368/0x3d0
[<0000000018657927>] x64_sys_call+0xff/0x9f0
[<00000000c0cabc95>] do_syscall_64+0x3b/0xc0
[<000000002f331597>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix overloading of MEM_UNINIT's meaning
Lonial reported an issue in the BPF verifier where check_mem_size_reg()
has the following code:
if (!tnum_is_const(reg->var_off))
/* For unprivileged variable accesses, disable raw
* mode so that the program is required to
* initialize all the memory that the helper could
* just partially fill up.
*/
meta = NULL;
This means that writes are not checked when the register containing the
size of the passed buffer has not a fixed size. Through this bug, a BPF
program can write to a map which is marked as read-only, for example,
.rodata global maps.
The problem is that MEM_UNINIT's initial meaning that "the passed buffer
to the BPF helper does not need to be initialized" which was added back
in commit 435faee1aae9 ("bpf, verifier: add ARG_PTR_TO_RAW_STACK type")
got overloaded over time with "the passed buffer is being written to".
The problem however is that checks such as the above which were added later
via 06c1c049721a ("bpf: allow helpers access to variable memory") set meta
to NULL in order force the user to always initialize the passed buffer to
the helper. Due to the current double meaning of MEM_UNINIT, this bypasses
verifier write checks to the memory (not boundary checks though) and only
assumes the latter memory is read instead.
Fix this by reverting MEM_UNINIT back to its original meaning, and having
MEM_WRITE as an annotation to BPF helpers in order to then trigger the
BPF verifier checks for writing to memory.
Some notes: check_arg_pair_ok() ensures that for ARG_CONST_SIZE{,_OR_ZERO}
we can access fn->arg_type[arg - 1] since it must contain a preceding
ARG_PTR_TO_MEM. For check_mem_reg() the meta argument can be removed
altogether since we do check both BPF_READ and BPF_WRITE. Same for the
equivalent check_kfunc_mem_size_reg(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check the remaining info_cnt before repeating btf fields
When trying to repeat the btf fields for array of nested struct, it
doesn't check the remaining info_cnt. The following splat will be
reported when the value of ret * nelems is greater than BTF_FIELDS_MAX:
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in ../kernel/bpf/btf.c:3951:49
index 11 is out of range for type 'btf_field_info [11]'
CPU: 6 UID: 0 PID: 411 Comm: test_progs ...... 6.11.0-rc4+ #1
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ...
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x70
dump_stack+0x10/0x20
ubsan_epilogue+0x9/0x40
__ubsan_handle_out_of_bounds+0x6f/0x80
? kallsyms_lookup_name+0x48/0xb0
btf_parse_fields+0x992/0xce0
map_create+0x591/0x770
__sys_bpf+0x229/0x2410
__x64_sys_bpf+0x1f/0x30
x64_sys_call+0x199/0x9f0
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fea56f2cc5d
......
</TASK>
---[ end trace ]---
Fix it by checking the remaining info_cnt in btf_repeat_fields() before
repeating the btf fields. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix the double free in scmi_debugfs_common_setup()
Clang static checker(scan-build) throws below warning：
| drivers/firmware/arm_scmi/driver.c:line 2915, column 2
| Attempt to free released memory.
When devm_add_action_or_reset() fails, scmi_debugfs_common_cleanup()
will run twice which causes double free of 'dbg->name'.
Remove the redundant scmi_debugfs_common_cleanup() to fix this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
octeon_ep: Add SKB allocation failures handling in __octep_oq_process_rx()
build_skb() returns NULL in case of a memory allocation failure so handle
it inside __octep_oq_process_rx() to avoid NULL pointer dereference.
__octep_oq_process_rx() is called during NAPI polling by the driver. If
skb allocation fails, keep on pulling packets out of the Rx DMA queue: we
shouldn't break the polling immediately and thus falsely indicate to the
octep_napi_poll() that the Rx pressure is going down. As there is no
associated skb in this case, don't process the packets and don't push them
up the network stack - they are skipped.
Helper function is implemented to unmmap/flush all the fragment buffers
used by the dropped packet. 'alloc_failures' counter is incremented to
mark the skb allocation error in driver statistics.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: fix uninit-value use in udf_get_fileshortad
Check for overflow when computing alen in udf_current_aext to mitigate
later uninit-value use in udf_get_fileshortad KMSAN bug[1].
After applying the patch reproducer did not trigger any issue[2].
[1] https://syzkaller.appspot.com/bug?extid=8901c4560b7ab5c2f9df
[2] https://syzkaller.appspot.com/x/log.txt?x=10242227980000 |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
PRMT needs to find the correct type of block to translate the PA-VA
mapping for EFI runtime services.
The issue arises because the PRMT is finding a block of type
EFI_CONVENTIONAL_MEMORY, which is not appropriate for runtime services
as described in Section 2.2.2 (Runtime Services) of the UEFI
Specification [1]. Since the PRM handler is a type of runtime service,
this causes an exception when the PRM handler is called.
[Firmware Bug]: Unable to handle paging request in EFI runtime service
WARNING: CPU: 22 PID: 4330 at drivers/firmware/efi/runtime-wrappers.c:341
__efi_queue_work+0x11c/0x170
Call trace:
Let PRMT find a block with EFI_MEMORY_RUNTIME for PRM handler and PRM
context.
If no suitable block is found, a warning message will be printed, but
the procedure continues to manage the next PRM handler.
However, if the PRM handler is actually called without proper allocation,
it would result in a failure during error handling.
By using the correct memory types for runtime services, ensure that the
PRM handler and the context are properly mapped in the virtual address
space during runtime, preventing the paging request error.
The issue is really that only memory that has been remapped for runtime
by the firmware can be used by the PRM handler, and so the region needs
to have the EFI_MEMORY_RUNTIME attribute.
[ rjw: Subject and changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix shift-out-of-bounds bug
Fix a shift-out-of-bounds bug reported by UBSAN when running
VM with MTE enabled host kernel.
UBSAN: shift-out-of-bounds in arch/arm64/kvm/sys_regs.c:1988:14
shift exponent 33 is too large for 32-bit type 'int'
CPU: 26 UID: 0 PID: 7629 Comm: qemu-kvm Not tainted 6.12.0-rc2 #34
Hardware name: IEI NF5280R7/Mitchell MB, BIOS 00.00. 2024-10-12 09:28:54 10/14/2024
Call trace:
dump_backtrace+0xa0/0x128
show_stack+0x20/0x38
dump_stack_lvl+0x74/0x90
dump_stack+0x18/0x28
__ubsan_handle_shift_out_of_bounds+0xf8/0x1e0
reset_clidr+0x10c/0x1c8
kvm_reset_sys_regs+0x50/0x1c8
kvm_reset_vcpu+0xec/0x2b0
__kvm_vcpu_set_target+0x84/0x158
kvm_vcpu_set_target+0x138/0x168
kvm_arch_vcpu_ioctl_vcpu_init+0x40/0x2b0
kvm_arch_vcpu_ioctl+0x28c/0x4b8
kvm_vcpu_ioctl+0x4bc/0x7a8
__arm64_sys_ioctl+0xb4/0x100
invoke_syscall+0x70/0x100
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x158
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x194/0x198 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/probes: Fix MAX_TRACE_ARGS limit handling
When creating a trace_probe we would set nr_args prior to truncating the
arguments to MAX_TRACE_ARGS. However, we would only initialize arguments
up to the limit.
This caused invalid memory access when attempting to set up probes with
more than 128 fetchargs.
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 UID: 0 PID: 1769 Comm: cat Not tainted 6.11.0-rc7+ #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
RIP: 0010:__set_print_fmt+0x134/0x330
Resolve the issue by applying the MAX_TRACE_ARGS limit earlier. Return
an error when there are too many arguments instead of silently
truncating. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Consider the NULL character when validating the event length
strlen() returns a string length excluding the null byte. If the string
length equals to the maximum buffer length, the buffer will have no
space for the NULL terminating character.
This commit checks this condition and returns failure for it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: fix global oob in wwan_rtnl_policy
The variable wwan_rtnl_link_ops assign a *bigger* maxtype which leads to
a global out-of-bounds read when parsing the netlink attributes. Exactly
same bug cause as the oob fixed in commit b33fb5b801c6 ("net: qualcomm:
rmnet: fix global oob in rmnet_policy").
==================================================================
BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:388 [inline]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603
Read of size 1 at addr ffffffff8b09cb60 by task syz.1.66276/323862
CPU: 0 PID: 323862 Comm: syz.1.66276 Not tainted 6.1.70 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x14f/0x750 mm/kasan/report.c:395
kasan_report+0x139/0x170 mm/kasan/report.c:495
validate_nla lib/nlattr.c:388 [inline]
__nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603
__nla_parse+0x3c/0x50 lib/nlattr.c:700
nla_parse_nested_deprecated include/net/netlink.h:1269 [inline]
__rtnl_newlink net/core/rtnetlink.c:3514 [inline]
rtnl_newlink+0x7bc/0x1fd0 net/core/rtnetlink.c:3623
rtnetlink_rcv_msg+0x794/0xef0 net/core/rtnetlink.c:6122
netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508
netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline]
netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352
netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874
sock_sendmsg_nosec net/socket.c:716 [inline]
__sock_sendmsg net/socket.c:728 [inline]
____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499
___sys_sendmsg+0x21c/0x290 net/socket.c:2553
__sys_sendmsg net/socket.c:2582 [inline]
__do_sys_sendmsg net/socket.c:2591 [inline]
__se_sys_sendmsg+0x19e/0x270 net/socket.c:2589
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f67b19a24ad
RSP: 002b:00007f67b17febb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f67b1b45f80 RCX: 00007f67b19a24ad
RDX: 0000000000000000 RSI: 0000000020005e40 RDI: 0000000000000004
RBP: 00007f67b1a1e01d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffd2513764f R14: 00007ffd251376e0 R15: 00007f67b17fed40
</TASK>
The buggy address belongs to the variable:
wwan_rtnl_policy+0x20/0x40
The buggy address belongs to the physical page:
page:ffffea00002c2700 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xb09c
flags: 0xfff00000001000(reserved|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000001000 ffffea00002c2708 ffffea00002c2708 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner info is not present (never set?)
Memory state around the buggy address:
ffffffff8b09ca00: 05 f9 f9 f9 05 f9 f9 f9 00 01 f9 f9 00 01 f9 f9
ffffffff8b09ca80: 00 00 00 05 f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9
>ffffffff8b09cb00: 00 00 00 00 05 f9 f9 f9 00 00 00 00 f9 f9 f9 f9
^
ffffffff8b09cb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
According to the comment of `nla_parse_nested_deprecated`, use correct size
`IFLA_WWAN_MAX` here to fix this issue. |
