| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Rustls is a modern TLS library written in Rust. `rustls::ConnectionCommon::complete_io` could fall into an infinite loop based on network input. When using a blocking rustls server, if a client send a `close_notify` message immediately after `client_hello`, the server's `complete_io` will get in an infinite loop. This vulnerability is fixed in 0.23.5, 0.22.4, and 0.21.11. |
| A security issue was discovered in the LRA Coordinator component of Narayana. When Cancel is called in LRA, an execution time of approximately 2 seconds occurs. If Join is called with the same LRA ID within that timeframe, the application may crash or hang indefinitely, leading to a denial of service. |
| In WinZip through 29.0, there is a Mark-of-the-Web Bypass Vulnerability because of an incomplete fix for CVE-2024-8811. This vulnerability allows attackers to bypass the Mark-of-the-Web protection mechanism on affected installations of WinZip. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of archived files. When extracting files from a crafted archive that bears the Mark-of-the-Web, WinZip does not propagate the Mark-of-the-Web to the extracted files. An attacker can leverage this vulnerability to execute arbitrary code in the context of the current user. NOTE: a third party has reported that this is a false positive, and has observed that the original CVE-2025-33028.md file has been deleted on GitHub. Also, this is disputed because Mark-of-the-Web propagation can increase risk via security-warning habituation, and because the intended control sphere for file-origin metadata (e.g., HostUrl in Zone.Identifier) may be narrower than that for reading the file's content. |
| Webserver crash caused by scanning on TCP port 80 in Softing Industrial Automation GmbH gateways and switch.This issue affects
smartLink HW-PN: from 1.02 through 1.03
smartLink HW-DP: 1.31 |
| Issue summary: Checking excessively long DSA keys or parameters may be very
slow.
Impact summary: Applications that use the functions EVP_PKEY_param_check()
or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.
The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (`p` parameter) is too large.
Trying to use a very large modulus is slow and OpenSSL will not allow using
public keys with a modulus which is over 10,000 bits in length for signature
verification. However the key and parameter check functions do not limit
the modulus size when performing the checks.
An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check()
and supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.
These functions are not called by OpenSSL itself on untrusted DSA keys so
only applications that directly call these functions may be vulnerable.
Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the `-check` option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| The Matrix specification before 1.16 (i.e., with a room version before 12) lacks create event uniqueness. |
| A vulnerability in the management and VPN web servers of Cisco Secure Firewall ASA Software and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability is due to improper validation of user-supplied input on an interface with VPN web services. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted web server on an affected device. A successful exploit could allow the attacker to cause a DoS condition when the device reloads. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix readahead reclaim deadlock
Commit e26ee4efbc79 ("fuse: allocate ff->release_args only if release is
needed") skips allocating ff->release_args if the server does not
implement open. However in doing so, fuse_prepare_release() now skips
grabbing the reference on the inode, which makes it possible for an
inode to be evicted from the dcache while there are inflight readahead
requests. This causes a deadlock if the server triggers reclaim while
servicing the readahead request and reclaim attempts to evict the inode
of the file being read ahead. Since the folio is locked during
readahead, when reclaim evicts the fuse inode and fuse_evict_inode()
attempts to remove all folios associated with the inode from the page
cache (truncate_inode_pages_range()), reclaim will block forever waiting
for the lock since readahead cannot relinquish the lock because it is
itself blocked in reclaim:
>>> stack_trace(1504735)
folio_wait_bit_common (mm/filemap.c:1308:4)
folio_lock (./include/linux/pagemap.h:1052:3)
truncate_inode_pages_range (mm/truncate.c:336:10)
fuse_evict_inode (fs/fuse/inode.c:161:2)
evict (fs/inode.c:704:3)
dentry_unlink_inode (fs/dcache.c:412:3)
__dentry_kill (fs/dcache.c:615:3)
shrink_kill (fs/dcache.c:1060:12)
shrink_dentry_list (fs/dcache.c:1087:3)
prune_dcache_sb (fs/dcache.c:1168:2)
super_cache_scan (fs/super.c:221:10)
do_shrink_slab (mm/shrinker.c:435:9)
shrink_slab (mm/shrinker.c:626:10)
shrink_node (mm/vmscan.c:5951:2)
shrink_zones (mm/vmscan.c:6195:3)
do_try_to_free_pages (mm/vmscan.c:6257:3)
do_swap_page (mm/memory.c:4136:11)
handle_pte_fault (mm/memory.c:5562:10)
handle_mm_fault (mm/memory.c:5870:9)
do_user_addr_fault (arch/x86/mm/fault.c:1338:10)
handle_page_fault (arch/x86/mm/fault.c:1481:3)
exc_page_fault (arch/x86/mm/fault.c:1539:2)
asm_exc_page_fault+0x22/0x27
Fix this deadlock by allocating ff->release_args and grabbing the
reference on the inode when preparing the file for release even if the
server does not implement open. The inode reference will be dropped when
the last reference on the fuse file is dropped (see fuse_file_put() ->
fuse_release_end()). |
| In GNOME Shell through 45.7, a portal helper can be launched automatically (without user confirmation) based on network responses provided by an adversary (e.g., an adversary who controls the local Wi-Fi network), and subsequently loads untrusted JavaScript code, which may lead to resource consumption or other impacts depending on the JavaScript code's behavior. |
| A vulnerability has been identified in SIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0) (All versions < V2.3), SIMATIC CP 1542SP-1 IRC (6GK7542-6VX00-0XE0) (All versions < V2.3), SIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (6AG2542-6VX00-4XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0) (All versions < V2.3), SIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0) (All versions < V2.4.8), TIM 1531 IRC (6GK7543-1MX00-0XE0) (All versions < V2.4.8). The web server of affected products, if configured to allow the import of PKCS12 containers, could end up in an infinite loop when processing incomplete certificate chains.
This could allow an authenticated remote attacker to create a denial of service condition by importing specially crafted PKCS12 containers. |
| The Volkov Labs Business Links panel for Grafana provides an interface to navigate using external links, internal dashboards, time pickers, and dropdown menus. Prior to version 2.4.0, a malicious actor with Editor privileges can escalate their privileges to Administrator and perform arbitrary administrative actions. This is possible because the plugin allows arbitrary JavaScript code injection in the [Layout] → [Link] → [URL] field. Version 2.4.0 contains a fix for the issue. |
| The package `github.com/gomarkdown/markdown` is a Go library for parsing Markdown text and rendering as HTML. Prior to pseudoversion `v0.0.0-20240729232818-a2a9c4f`, which corresponds with commit `a2a9c4f76ef5a5c32108e36f7c47f8d310322252`, there was a logical problem in the paragraph function of the parser/block.go file, which allowed a remote attacker to cause a denial of service (DoS) condition by providing a tailor-made input that caused an infinite loop, causing the program to hang and consume resources indefinitely. Submit `a2a9c4f76ef5a5c32108e36f7c47f8d310322252` contains fixes to this problem. |
| Memory corruptions can be remotely triggered in the Control-M/Agent when SSL/TLS communication is configured.
The issue occurs in the following cases:
* Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n";
* Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n" |
| os/linux/elf.rb in Homebrew brew before 4.2.20 uses ldd to load ELF files obtained from untrusted sources, which allows attackers to achieve code execution via an ELF file with a custom .interp section. NOTE: this code execution would occur during an un-sandboxed binary relocation phase, which occurs before a user would expect execution of downloaded package content. (237d1e783f7ee261beaba7d3f6bde22da7148b0a was the tested vulnerable version.) |
| SAP NetWeaver Business Warehouse CCAW application allows a privileged attacker to cause a high CPU load by executing a RFC enabled function modules without any input parameters, which results in reduced performance or interrupted operation of the affected resource. This leads to low impact on availability of the application, there is no impact on confidentiality and integrity. |
| In Genivia gSOAP with a specific configuration an unauthenticated remote attacker can generate a high CPU load when forcing to parse an XML having duplicate ID attributes which can lead to a DoS. |
| A vulnerability in the IKEv2 feature of Cisco IOS Software, IOS XE Software, Secure Firewall ASA Software, and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a DoS condition.
This vulnerability is due to the improper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to cause an infinite loop that exhausts resources and could cause the device to reload. |
| When reading binary Ion data through Amazon.IonDotnet using the RawBinaryReader class, Amazon.IonDotnet does not check the number of bytes read from the underlying stream while deserializing the binary format. If the Ion data is malformed or truncated, this triggers an infinite loop condition that could potentially result in a denial of service. Users should upgrade to Amazon.IonDotnet version 1.3.1 and ensure any forked or derivative code is patched to incorporate the new fixes. |
| nanoid (aka Nano ID) before 5.0.9 mishandles non-integer values. 3.3.8 is also a fixed version. |
| Tokens in CTFd used for account activation and password resetting can be used interchangeably for these operations. When used, they are sent to the server as a GET parameter and they are not single use, which means, that during token expiration time an on-path attacker might reuse such a token to change user's password and take over the account. Moreover, the tokens also include base64 encoded user email.
This issue impacts releases up to 3.7.4 and was addressed by pull request 2679 https://github.com/CTFd/CTFd/pull/2679 included in 3.7.5 release. |
