| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
kasan: avoid sleepable page allocation from atomic context
apply_to_pte_range() enters the lazy MMU mode and then invokes
kasan_populate_vmalloc_pte() callback on each page table walk iteration.
However, the callback can go into sleep when trying to allocate a single
page, e.g. if an architecutre disables preemption on lazy MMU mode enter.
On s390 if make arch_enter_lazy_mmu_mode() -> preempt_enable() and
arch_leave_lazy_mmu_mode() -> preempt_disable(), such crash occurs:
[ 0.663336] BUG: sleeping function called from invalid context at ./include/linux/sched/mm.h:321
[ 0.663348] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd
[ 0.663358] preempt_count: 1, expected: 0
[ 0.663366] RCU nest depth: 0, expected: 0
[ 0.663375] no locks held by kthreadd/2.
[ 0.663383] Preemption disabled at:
[ 0.663386] [<0002f3284cbb4eda>] apply_to_pte_range+0xfa/0x4a0
[ 0.663405] CPU: 0 UID: 0 PID: 2 Comm: kthreadd Not tainted 6.15.0-rc5-gcc-kasan-00043-gd76bb1ebb558-dirty #162 PREEMPT
[ 0.663408] Hardware name: IBM 3931 A01 701 (KVM/Linux)
[ 0.663409] Call Trace:
[ 0.663410] [<0002f3284c385f58>] dump_stack_lvl+0xe8/0x140
[ 0.663413] [<0002f3284c507b9e>] __might_resched+0x66e/0x700
[ 0.663415] [<0002f3284cc4f6c0>] __alloc_frozen_pages_noprof+0x370/0x4b0
[ 0.663419] [<0002f3284ccc73c0>] alloc_pages_mpol+0x1a0/0x4a0
[ 0.663421] [<0002f3284ccc8518>] alloc_frozen_pages_noprof+0x88/0xc0
[ 0.663424] [<0002f3284ccc8572>] alloc_pages_noprof+0x22/0x120
[ 0.663427] [<0002f3284cc341ac>] get_free_pages_noprof+0x2c/0xc0
[ 0.663429] [<0002f3284cceba70>] kasan_populate_vmalloc_pte+0x50/0x120
[ 0.663433] [<0002f3284cbb4ef8>] apply_to_pte_range+0x118/0x4a0
[ 0.663435] [<0002f3284cbc7c14>] apply_to_pmd_range+0x194/0x3e0
[ 0.663437] [<0002f3284cbc99be>] __apply_to_page_range+0x2fe/0x7a0
[ 0.663440] [<0002f3284cbc9e88>] apply_to_page_range+0x28/0x40
[ 0.663442] [<0002f3284ccebf12>] kasan_populate_vmalloc+0x82/0xa0
[ 0.663445] [<0002f3284cc1578c>] alloc_vmap_area+0x34c/0xc10
[ 0.663448] [<0002f3284cc1c2a6>] __get_vm_area_node+0x186/0x2a0
[ 0.663451] [<0002f3284cc1e696>] __vmalloc_node_range_noprof+0x116/0x310
[ 0.663454] [<0002f3284cc1d950>] __vmalloc_node_noprof+0xd0/0x110
[ 0.663457] [<0002f3284c454b88>] alloc_thread_stack_node+0xf8/0x330
[ 0.663460] [<0002f3284c458d56>] dup_task_struct+0x66/0x4d0
[ 0.663463] [<0002f3284c45be90>] copy_process+0x280/0x4b90
[ 0.663465] [<0002f3284c460940>] kernel_clone+0xd0/0x4b0
[ 0.663467] [<0002f3284c46115e>] kernel_thread+0xbe/0xe0
[ 0.663469] [<0002f3284c4e440e>] kthreadd+0x50e/0x7f0
[ 0.663472] [<0002f3284c38c04a>] __ret_from_fork+0x8a/0xf0
[ 0.663475] [<0002f3284ed57ff2>] ret_from_fork+0xa/0x38
Instead of allocating single pages per-PTE, bulk-allocate the shadow
memory prior to applying kasan_populate_vmalloc_pte() callback on a page
range. |
| In the Linux kernel, the following vulnerability has been resolved:
mr: consolidate the ipmr_can_free_table() checks.
Guoyu Yin reported a splat in the ipmr netns cleanup path:
WARNING: CPU: 2 PID: 14564 at net/ipv4/ipmr.c:440 ipmr_free_table net/ipv4/ipmr.c:440 [inline]
WARNING: CPU: 2 PID: 14564 at net/ipv4/ipmr.c:440 ipmr_rules_exit+0x135/0x1c0 net/ipv4/ipmr.c:361
Modules linked in:
CPU: 2 UID: 0 PID: 14564 Comm: syz.4.838 Not tainted 6.14.0 #1
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ipmr_free_table net/ipv4/ipmr.c:440 [inline]
RIP: 0010:ipmr_rules_exit+0x135/0x1c0 net/ipv4/ipmr.c:361
Code: ff df 48 c1 ea 03 80 3c 02 00 75 7d 48 c7 83 60 05 00 00 00 00 00 00 5b 5d 41 5c 41 5d 41 5e e9 71 67 7f 00 e8 4c 2d 8a fd 90 <0f> 0b 90 eb 93 e8 41 2d 8a fd 0f b6 2d 80 54 ea 01 31 ff 89 ee e8
RSP: 0018:ffff888109547c58 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888108c12dc0 RCX: ffffffff83e09868
RDX: ffff8881022b3300 RSI: ffffffff83e098d4 RDI: 0000000000000005
RBP: ffff888104288000 R08: 0000000000000000 R09: ffffed10211825c9
R10: 0000000000000001 R11: ffff88801816c4a0 R12: 0000000000000001
R13: ffff888108c13320 R14: ffff888108c12dc0 R15: fffffbfff0b74058
FS: 00007f84f39316c0(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f84f3930f98 CR3: 0000000113b56000 CR4: 0000000000350ef0
Call Trace:
<TASK>
ipmr_net_exit_batch+0x50/0x90 net/ipv4/ipmr.c:3160
ops_exit_list+0x10c/0x160 net/core/net_namespace.c:177
setup_net+0x47d/0x8e0 net/core/net_namespace.c:394
copy_net_ns+0x25d/0x410 net/core/net_namespace.c:516
create_new_namespaces+0x3f6/0xaf0 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc3/0x180 kernel/nsproxy.c:228
ksys_unshare+0x78d/0x9a0 kernel/fork.c:3342
__do_sys_unshare kernel/fork.c:3413 [inline]
__se_sys_unshare kernel/fork.c:3411 [inline]
__x64_sys_unshare+0x31/0x40 kernel/fork.c:3411
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xa6/0x1a0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f84f532cc29
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f84f3931038 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00007f84f5615fa0 RCX: 00007f84f532cc29
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000400
RBP: 00007f84f53fba18 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f84f5615fa0 R15: 00007fff51c5f328
</TASK>
The running kernel has CONFIG_IP_MROUTE_MULTIPLE_TABLES disabled, and
the sanity check for such build is still too loose.
Address the issue consolidating the relevant sanity check in a single
helper regardless of the kernel configuration. Also share it between
the ipv4 and ipv6 code. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/Kconfig: make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88
Calling core::fmt::write() from rust code while FineIBT is enabled
results in a kernel panic:
[ 4614.199779] kernel BUG at arch/x86/kernel/cet.c:132!
[ 4614.205343] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 4614.211781] CPU: 2 UID: 0 PID: 6057 Comm: dmabuf_dump Tainted: G U O 6.12.17-android16-0-g6ab38c534a43 #1 9da040f27673ec3945e23b998a0f8bd64c846599
[ 4614.227832] Tainted: [U]=USER, [O]=OOT_MODULE
[ 4614.241247] RIP: 0010:do_kernel_cp_fault+0xea/0xf0
...
[ 4614.398144] RIP: 0010:_RNvXs5_NtNtNtCs3o2tGsuHyou_4core3fmt3num3impyNtB9_7Display3fmt+0x0/0x20
[ 4614.407792] Code: 48 f7 df 48 0f 48 f9 48 89 f2 89 c6 5d e9 18 fd ff ff 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 41 81 ea 14 61 af 2c 74 03 0f 0b 90 <66> 0f 1f 00 55 48 89 e5 48 89 f2 48 8b 3f be 01 00 00 00 5d e9 e7
[ 4614.428775] RSP: 0018:ffffb95acfa4ba68 EFLAGS: 00010246
[ 4614.434609] RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000000
[ 4614.442587] RDX: 0000000000000007 RSI: ffffb95acfa4ba70 RDI: ffffb95acfa4bc88
[ 4614.450557] RBP: ffffb95acfa4bae0 R08: ffff0a00ffffff05 R09: 0000000000000070
[ 4614.458527] R10: 0000000000000000 R11: ffffffffab67eaf0 R12: ffffb95acfa4bcc8
[ 4614.466493] R13: ffffffffac5d50f0 R14: 0000000000000000 R15: 0000000000000000
[ 4614.474473] ? __cfi__RNvXs5_NtNtNtCs3o2tGsuHyou_4core3fmt3num3impyNtB9_7Display3fmt+0x10/0x10
[ 4614.484118] ? _RNvNtCs3o2tGsuHyou_4core3fmt5write+0x1d2/0x250
This happens because core::fmt::write() calls
core::fmt::rt::Argument::fmt(), which currently has CFI disabled:
library/core/src/fmt/rt.rs:
171 // FIXME: Transmuting formatter in new and indirectly branching to/calling
172 // it here is an explicit CFI violation.
173 #[allow(inline_no_sanitize)]
174 #[no_sanitize(cfi, kcfi)]
175 #[inline]
176 pub(super) unsafe fn fmt(&self, f: &mut Formatter<'_>) -> Result {
This causes a Control Protection exception, because FineIBT has sealed
off the original function's endbr64.
This makes rust currently incompatible with FineIBT. Add a Kconfig
dependency that prevents FineIBT from getting turned on by default
if rust is enabled.
[ Rust 1.88.0 (scheduled for 2025-06-26) should have this fixed [1],
and thus we relaxed the condition with Rust >= 1.88.
When `objtool` lands checking for this with e.g. [2], the plan is
to ideally run that in upstream Rust's CI to prevent regressions
early [3], since we do not control `core`'s source code.
Alice tested the Rust PR backported to an older compiler.
Peter would like that Rust provides a stable `core` which can be
pulled into the kernel: "Relying on that much out of tree code is
'unfortunate'".
- Miguel ]
[ Reduced splat. - Miguel ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vf: Perform early GT MMIO initialization to read GMDID
VFs need to communicate with the GuC to obtain the GMDID value
and existing GuC functions used for that assume that the GT has
it's MMIO members already setup. However, due to recent refactoring
the gt->mmio is initialized later, and any attempt by the VF to use
xe_mmio_read|write() from GuC functions will lead to NPD crash due
to unset MMIO register address:
[] xe 0000:00:02.1: [drm] Running in SR-IOV VF mode
[] xe 0000:00:02.1: [drm] GT0: sending H2G MMIO 0x5507
[] BUG: unable to handle page fault for address: 0000000000190240
Since we are already tweaking the id and type of the primary GT to
mimic it's a Media GT before initializing the GuC communication,
we can also call xe_gt_mmio_init() to perform early setup of the
gt->mmio which will make those GuC functions work again. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: amd-pstate: Remove unnecessary driver_lock in set_boost
set_boost is a per-policy function call, hence a driver wide lock is
unnecessary. Also this mutex_acquire can collide with the mutex_acquire
from the mode-switch path in status_store(), which can lead to a
deadlock. So, remove it. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Avoid WARN_ON when configuring MQPRIO with HTB offload enabled
When attempting to enable MQPRIO while HTB offload is already
configured, the driver currently returns `-EINVAL` and triggers a
`WARN_ON`, leading to an unnecessary call trace.
Update the code to handle this case more gracefully by returning
`-EOPNOTSUPP` instead, while also providing a helpful user message. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: sunxi-ng: h616: Reparent GPU clock during frequency changes
The H616 manual does not state that the GPU PLL supports
dynamic frequency configuration, so we must take extra care when changing
the frequency. Currently any attempt to do device DVFS on the GPU lead
to panfrost various ooops, and GPU hangs.
The manual describes the algorithm for changing the PLL
frequency, which the CPU PLL notifier code already support, so we reuse
that to reparent the GPU clock to GPU1 clock during frequency
changes. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: k3-udma-glue: Drop skip_fdq argument from k3_udma_glue_reset_rx_chn
The user of k3_udma_glue_reset_rx_chn() e.g. ti_am65_cpsw_nuss can
run on multiple platforms having different DMA architectures.
On some platforms there can be one FDQ for all flows in the RX channel
while for others there is a separate FDQ for each flow in the RX channel.
So far we have been relying on the skip_fdq argument of
k3_udma_glue_reset_rx_chn().
Instead of relying on the user to provide this information, infer it
based on DMA architecture during k3_udma_glue_request_rx_chn() and save it
in an internal flag 'single_fdq'. Use that flag at
k3_udma_glue_reset_rx_chn() to deicide if the FDQ needs
to be cleared for every flow or just for flow 0.
Fixes the below issue on ti_am65_cpsw_nuss driver on AM62-SK.
> ip link set eth1 down
> ip link set eth0 down
> ethtool -L eth0 rx 8
> ip link set eth0 up
> modprobe -r ti_am65_cpsw_nuss
[ 103.045726] ------------[ cut here ]------------
[ 103.050505] k3_knav_desc_pool size 512000 != avail 64000
[ 103.050703] WARNING: CPU: 1 PID: 450 at drivers/net/ethernet/ti/k3-cppi-desc-pool.c:33 k3_cppi_desc_pool_destroy+0xa0/0xa8 [k3_cppi_desc_pool]
[ 103.068810] Modules linked in: ti_am65_cpsw_nuss(-) k3_cppi_desc_pool snd_soc_hdmi_codec crct10dif_ce snd_soc_simple_card snd_soc_simple_card_utils display_connector rtc_ti_k3 k3_j72xx_bandgap tidss drm_client_lib snd_soc_davinci_mcas
p drm_dma_helper tps6598x phylink snd_soc_ti_udma rti_wdt drm_display_helper snd_soc_tlv320aic3x_i2c typec at24 phy_gmii_sel snd_soc_ti_edma snd_soc_tlv320aic3x sii902x snd_soc_ti_sdma sa2ul omap_mailbox drm_kms_helper authenc cfg80211 r
fkill fuse drm drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [last unloaded: k3_cppi_desc_pool]
[ 103.119950] CPU: 1 UID: 0 PID: 450 Comm: modprobe Not tainted 6.13.0-rc7-00001-g9c5e3435fa66 #1011
[ 103.119968] Hardware name: Texas Instruments AM625 SK (DT)
[ 103.119974] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 103.119983] pc : k3_cppi_desc_pool_destroy+0xa0/0xa8 [k3_cppi_desc_pool]
[ 103.148007] lr : k3_cppi_desc_pool_destroy+0xa0/0xa8 [k3_cppi_desc_pool]
[ 103.154709] sp : ffff8000826ebbc0
[ 103.158015] x29: ffff8000826ebbc0 x28: ffff0000090b6300 x27: 0000000000000000
[ 103.165145] x26: 0000000000000000 x25: 0000000000000000 x24: ffff0000019df6b0
[ 103.172271] x23: ffff0000019df6b8 x22: ffff0000019df410 x21: ffff8000826ebc88
[ 103.179397] x20: 000000000007d000 x19: ffff00000a3b3000 x18: 0000000000000000
[ 103.186522] x17: 0000000000000000 x16: 0000000000000000 x15: 000001e8c35e1cde
[ 103.193647] x14: 0000000000000396 x13: 000000000000035c x12: 0000000000000000
[ 103.200772] x11: 000000000000003a x10: 00000000000009c0 x9 : ffff8000826eba20
[ 103.207897] x8 : ffff0000090b6d20 x7 : ffff00007728c180 x6 : ffff00007728c100
[ 103.215022] x5 : 0000000000000001 x4 : ffff000000508a50 x3 : ffff7ffff6146000
[ 103.222147] x2 : 0000000000000000 x1 : e300b4173ee6b200 x0 : 0000000000000000
[ 103.229274] Call trace:
[ 103.231714] k3_cppi_desc_pool_destroy+0xa0/0xa8 [k3_cppi_desc_pool] (P)
[ 103.238408] am65_cpsw_nuss_free_rx_chns+0x28/0x4c [ti_am65_cpsw_nuss]
[ 103.244942] devm_action_release+0x14/0x20
[ 103.249040] release_nodes+0x3c/0x68
[ 103.252610] devres_release_all+0x8c/0xdc
[ 103.256614] device_unbind_cleanup+0x18/0x60
[ 103.260876] device_release_driver_internal+0xf8/0x178
[ 103.266004] driver_detach+0x50/0x9c
[ 103.269571] bus_remove_driver+0x6c/0xbc
[ 103.273485] driver_unregister+0x30/0x60
[ 103.277401] platform_driver_unregister+0x14/0x20
[ 103.282096] am65_cpsw_nuss_driver_exit+0x18/0xff4 [ti_am65_cpsw_nuss]
[ 103.288620] __arm64_sys_delete_module+0x17c/0x25c
[ 103.293404] invoke_syscall+0x44/0x100
[ 103.297149] el0_svc_common.constprop.0+0xc0/0xe0
[ 103.301845] do_el0_svc+0x1c/0x28
[ 103.305155] el0_svc+0x28/0x98
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix debug actions order
The order of actions taken for debug was implemented incorrectly.
Now we implemented the dump split and do the FW reset only in the
middle of the dump (rather than the FW killing itself on error.)
As a result, some of the actions taken when applying the config
will now crash the device, so we need to fix the order. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fred: Fix system hang during S4 resume with FRED enabled
Upon a wakeup from S4, the restore kernel starts and initializes the
FRED MSRs as needed from its perspective. It then loads a hibernation
image, including the image kernel, and attempts to load image pages
directly into their original page frames used before hibernation unless
those frames are currently in use. Once all pages are moved to their
original locations, it jumps to a "trampoline" page in the image kernel.
At this point, the image kernel takes control, but the FRED MSRs still
contain values set by the restore kernel, which may differ from those
set by the image kernel before hibernation. Therefore, the image kernel
must ensure the FRED MSRs have the same values as before hibernation.
Since these values depend only on the location of the kernel text and
data, they can be recomputed from scratch. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix kernel NULL pointer dereference when replacing free hugetlb folios
A kernel crash was observed when replacing free hugetlb folios:
BUG: kernel NULL pointer dereference, address: 0000000000000028
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 28 UID: 0 PID: 29639 Comm: test_cma.sh Tainted 6.15.0-rc6-zp #41 PREEMPT(voluntary)
RIP: 0010:alloc_and_dissolve_hugetlb_folio+0x1d/0x1f0
RSP: 0018:ffffc9000b30fa90 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000342cca RCX: ffffea0043000000
RDX: ffffc9000b30fb08 RSI: ffffea0043000000 RDI: 0000000000000000
RBP: ffffc9000b30fb20 R08: 0000000000001000 R09: 0000000000000000
R10: ffff88886f92eb00 R11: 0000000000000000 R12: ffffea0043000000
R13: 0000000000000000 R14: 00000000010c0200 R15: 0000000000000004
FS: 00007fcda5f14740(0000) GS:ffff8888ec1d8000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000028 CR3: 0000000391402000 CR4: 0000000000350ef0
Call Trace:
<TASK>
replace_free_hugepage_folios+0xb6/0x100
alloc_contig_range_noprof+0x18a/0x590
? srso_return_thunk+0x5/0x5f
? down_read+0x12/0xa0
? srso_return_thunk+0x5/0x5f
cma_range_alloc.constprop.0+0x131/0x290
__cma_alloc+0xcf/0x2c0
cma_alloc_write+0x43/0xb0
simple_attr_write_xsigned.constprop.0.isra.0+0xb2/0x110
debugfs_attr_write+0x46/0x70
full_proxy_write+0x62/0xa0
vfs_write+0xf8/0x420
? srso_return_thunk+0x5/0x5f
? filp_flush+0x86/0xa0
? srso_return_thunk+0x5/0x5f
? filp_close+0x1f/0x30
? srso_return_thunk+0x5/0x5f
? do_dup2+0xaf/0x160
? srso_return_thunk+0x5/0x5f
ksys_write+0x65/0xe0
do_syscall_64+0x64/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
There is a potential race between __update_and_free_hugetlb_folio() and
replace_free_hugepage_folios():
CPU1 CPU2
__update_and_free_hugetlb_folio replace_free_hugepage_folios
folio_test_hugetlb(folio)
-- It's still hugetlb folio.
__folio_clear_hugetlb(folio)
hugetlb_free_folio(folio)
h = folio_hstate(folio)
-- Here, h is NULL pointer
When the above race condition occurs, folio_hstate(folio) returns NULL,
and subsequent access to this NULL pointer will cause the system to crash.
To resolve this issue, execute folio_hstate(folio) under the protection
of the hugetlb_lock lock, ensuring that folio_hstate(folio) does not
return NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix null-ptr-deref in idpf_features_check
idpf_features_check is used to validate the TX packet. skb header
length is compared with the hardware supported value received from
the device control plane. The value is stored in the adapter structure
and to access it, vport pointer is used. During reset all the vports
are released and the vport pointer that the netdev private structure
points to is NULL.
To avoid null-ptr-deref, store the max header length value in netdev
private structure. This also helps to cache the value and avoid
accessing adapter pointer in hot path.
BUG: kernel NULL pointer dereference, address: 0000000000000068
...
RIP: 0010:idpf_features_check+0x6d/0xe0 [idpf]
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x154/0x520
? exc_page_fault+0x76/0x190
? asm_exc_page_fault+0x26/0x30
? idpf_features_check+0x6d/0xe0 [idpf]
netif_skb_features+0x88/0x310
validate_xmit_skb+0x2a/0x2b0
validate_xmit_skb_list+0x4c/0x70
sch_direct_xmit+0x19d/0x3a0
__dev_queue_xmit+0xb74/0xe70
... |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: Limit signal/freq counts in summary output functions
The debugfs summary output could access uninitialized elements in
the freq_in[] and signal_out[] arrays, causing NULL pointer
dereferences and triggering a kernel Oops (page_fault_oops).
This patch adds u8 fields (nr_freq_in, nr_signal_out) to track the
number of initialized elements, with a maximum of 4 per array.
The summary output functions are updated to respect these limits,
preventing out-of-bounds access and ensuring safe array handling.
Widen the label variables because the change confuses GCC about
max length of the strings. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Fix segfault with PEBS-via-PT with sample_freq
Currently, using PEBS-via-PT with a sample frequency instead of a sample
period, causes a segfault. For example:
BUG: kernel NULL pointer dereference, address: 0000000000000195
<NMI>
? __die_body.cold+0x19/0x27
? page_fault_oops+0xca/0x290
? exc_page_fault+0x7e/0x1b0
? asm_exc_page_fault+0x26/0x30
? intel_pmu_pebs_event_update_no_drain+0x40/0x60
? intel_pmu_pebs_event_update_no_drain+0x32/0x60
intel_pmu_drain_pebs_icl+0x333/0x350
handle_pmi_common+0x272/0x3c0
intel_pmu_handle_irq+0x10a/0x2e0
perf_event_nmi_handler+0x2a/0x50
That happens because intel_pmu_pebs_event_update_no_drain() assumes all the
pebs_enabled bits represent counter indexes, which is not always the case.
In this particular case, bits 60 and 61 are set for PEBS-via-PT purposes.
The behaviour of PEBS-via-PT with sample frequency is questionable because
although a PMI is generated (PEBS_PMI_AFTER_EACH_RECORD), the period is not
adjusted anyway.
Putting that aside, fix intel_pmu_pebs_event_update_no_drain() by passing
the mask of counter bits instead of 'size'. Note, prior to the Fixes
commit, 'size' would be limited to the maximum counter index, so the issue
was not hit. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: cnl: Do not process IPC reply before firmware boot
It is not yet clear, but it is possible to create a firmware so broken
that it will send a reply message before a FW_READY message (it is not
yet clear if FW_READY will arrive later).
Since the reply_data is allocated only after the FW_READY message, this
will lead to a NULL pointer dereference if not filtered out.
The issue was reported with IPC4 firmware but the same condition is present
for IPC3. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda: Fix UAF when reloading module
hda_generic_machine_select() appends -idisp to the tplg filename by
allocating a new string with devm_kasprintf(), then stores the string
right back into the global variable snd_soc_acpi_intel_hda_machines.
When the module is unloaded, this memory is freed, resulting in a global
variable pointing to freed memory. Reloading the module then triggers
a use-after-free:
BUG: KFENCE: use-after-free read in string+0x48/0xe0
Use-after-free read at 0x00000000967e0109 (in kfence-#99):
string+0x48/0xe0
vsnprintf+0x329/0x6e0
devm_kvasprintf+0x54/0xb0
devm_kasprintf+0x58/0x80
hda_machine_select.cold+0x198/0x17a2 [snd_sof_intel_hda_generic]
sof_probe_work+0x7f/0x600 [snd_sof]
process_one_work+0x17b/0x330
worker_thread+0x2ce/0x3f0
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
kfence-#99: 0x00000000198a940f-0x00000000ace47d9d, size=64, cache=kmalloc-64
allocated by task 333 on cpu 8 at 17.798069s (130.453553s ago):
devm_kmalloc+0x52/0x120
devm_kvasprintf+0x66/0xb0
devm_kasprintf+0x58/0x80
hda_machine_select.cold+0x198/0x17a2 [snd_sof_intel_hda_generic]
sof_probe_work+0x7f/0x600 [snd_sof]
process_one_work+0x17b/0x330
worker_thread+0x2ce/0x3f0
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
freed by task 1543 on cpu 4 at 141.586686s (6.665010s ago):
release_nodes+0x43/0xb0
devres_release_all+0x90/0xf0
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c1/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x42/0xb0
__do_sys_delete_module+0x1d1/0x310
do_syscall_64+0x82/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix it by copying the match array with devm_kmemdup_array() before we
modify it. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda-ipc: Do not process IPC reply before firmware boot
It is not yet clear, but it is possible to create a firmware so broken
that it will send a reply message before a FW_READY message (it is not
yet clear if FW_READY will arrive later).
Since the reply_data is allocated only after the FW_READY message, this
will lead to a NULL pointer dereference if not filtered out.
The issue was reported with IPC4 firmware but the same condition is present
for IPC3. |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: fix skb leaks
A few error paths are missing a kfree_skb. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: avoid NULL pointer dereference if no valid csum tree
[BUG]
When trying read-only scrub on a btrfs with rescue=idatacsums mount
option, it will crash with the following call trace:
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
CPU: 1 UID: 0 PID: 835 Comm: btrfs Tainted: G O 6.15.0-rc3-custom+ #236 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:btrfs_lookup_csums_bitmap+0x49/0x480 [btrfs]
Call Trace:
<TASK>
scrub_find_fill_first_stripe+0x35b/0x3d0 [btrfs]
scrub_simple_mirror+0x175/0x290 [btrfs]
scrub_stripe+0x5f7/0x6f0 [btrfs]
scrub_chunk+0x9a/0x150 [btrfs]
scrub_enumerate_chunks+0x333/0x660 [btrfs]
btrfs_scrub_dev+0x23e/0x600 [btrfs]
btrfs_ioctl+0x1dcf/0x2f80 [btrfs]
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x4f/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[CAUSE]
Mount option "rescue=idatacsums" will completely skip loading the csum
tree, so that any data read will not find any data csum thus we will
ignore data checksum verification.
Normally call sites utilizing csum tree will check the fs state flag
NO_DATA_CSUMS bit, but unfortunately scrub does not check that bit at all.
This results in scrub to call btrfs_search_slot() on a NULL pointer
and triggered above crash.
[FIX]
Check both extent and csum tree root before doing any tree search. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: copy_verifier_state() should copy 'loop_entry' field
The bpf_verifier_state.loop_entry state should be copied by
copy_verifier_state(). Otherwise, .loop_entry values from unrelated
states would poison env->cur_state.
Additionally, env->stack should not contain any states with
.loop_entry != NULL. The states in env->stack are yet to be verified,
while .loop_entry is set for states that reached an equivalent state.
This means that env->cur_state->loop_entry should always be NULL after
pop_stack().
See the selftest in the next commit for an example of the program that
is not safe yet is accepted by verifier w/o this fix.
This change has some verification performance impact for selftests:
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
---------------------------------- ---------------------------- --------- --------- -------------- ---------- ---------- -------------
arena_htab.bpf.o arena_htab_llvm 717 426 -291 (-40.59%) 57 37 -20 (-35.09%)
arena_htab_asm.bpf.o arena_htab_asm 597 445 -152 (-25.46%) 47 37 -10 (-21.28%)
arena_list.bpf.o arena_list_del 309 279 -30 (-9.71%) 23 14 -9 (-39.13%)
iters.bpf.o iter_subprog_check_stacksafe 155 141 -14 (-9.03%) 15 14 -1 (-6.67%)
iters.bpf.o iter_subprog_iters 1094 1003 -91 (-8.32%) 88 83 -5 (-5.68%)
iters.bpf.o loop_state_deps2 479 725 +246 (+51.36%) 46 63 +17 (+36.96%)
kmem_cache_iter.bpf.o open_coded_iter 63 59 -4 (-6.35%) 7 6 -1 (-14.29%)
verifier_bits_iter.bpf.o max_words 92 84 -8 (-8.70%) 8 7 -1 (-12.50%)
verifier_iterating_callbacks.bpf.o cond_break2 113 107 -6 (-5.31%) 12 12 +0 (+0.00%)
And significant negative impact for sched_ext:
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
----------------- ---------------------- --------- --------- -------------------- ---------- ---------- ------------------
bpf.bpf.o lavd_init 7039 14723 +7684 (+109.16%) 490 1139 +649 (+132.45%)
bpf.bpf.o layered_dispatch 11485 10548 -937 (-8.16%) 848 762 -86 (-10.14%)
bpf.bpf.o layered_dump 7422 1000001 +992579 (+13373.47%) 681 31178 +30497 (+4478.27%)
bpf.bpf.o layered_enqueue 16854 71127 +54273 (+322.02%) 1611 6450 +4839 (+300.37%)
bpf.bpf.o p2dq_dispatch 665 791 +126 (+18.95%) 68 78 +10 (+14.71%)
bpf.bpf.o p2dq_init 2343 2980 +637 (+27.19%) 201 237 +36 (+17.91%)
bpf.bpf.o refresh_layer_cpumasks 16487 674760 +658273 (+3992.68%) 1770 65370 +63600 (+3593.22%)
bpf.bpf.o rusty_select_cpu 1937 40872 +38935 (+2010.07%) 177 3210 +3033 (+1713.56%)
scx_central.bpf.o central_dispatch 636 2687 +2051 (+322.48%) 63 227 +164 (+260.32%)
scx_nest.bpf.o nest_init 636 815 +179 (+28.14%) 60 73 +13 (+21.67%)
scx_qmap.bpf.o qmap_dispatch
---truncated--- |
