| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The AppMySite – WordPress & WooCommerce Mobile App Builder (No-Code Android & iOS App Maker) plugin for WordPress is vulnerable to Stored Cross-Site Scripting via save_ams_license_key AJAX Handler in all versions up to, and including, 3.15.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The save_ams_license_key AJAX handler performs no capability check and no nonce verification, meaning any authenticated user with Subscriber-level access or above can invoke it to store the malicious payload. |
| The Asset CleanUp: Page Speed Booster plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content in all versions up to, and including, 1.4.0.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is only exploitable on instances where combine_loaded_css has been enabled. |
| The Create plugin for WordPress is vulnerable to generic SQL Injection via the 'order' parameter in all versions up to, and including, 2.5.3 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with author-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The vulnerable advanced-filter SQL branch is only entered when at least one of the following parameters is present in the request: linked_posts, created_after, created_before, missing_fields, post_id, a comma-separated type value, or exclude_type. |
| The Create plugin for WordPress is vulnerable to generic SQL Injection via the 'order_by' parameter in all versions up to, and including, 2.5.3 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with author-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The REST endpoint permission callback defaults to the publish_posts capability, meaning any Author-level user or above can reach the vulnerable code path without any additional preconditions. |
| The OTP Login & Register Woocommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'fb-config' Setting in all versions up to, and including, 2.7.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. On multisite installations where administrators do not hold the unfiltered_html capability, this vulnerability can be leveraged to target the network super administrator. |
| The WP2Social Auto Publish plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 2.4.12 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| The PDF Builder for WooCommerce. Create invoices,packing slips and more plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.0.11. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to retrieve invoice numbers, formatted invoice numbers, and creation timestamps for arbitrary WooCommerce orders by supplying any OrderNumber and InvoiceId values with a garbage nonce. |
| The WP Customer Reviews plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'wpcr3_fname' parameter in all versions up to, and including, 3.7.8 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The Business Name Generator WordPress plugin through 1.3 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: do not attach hif2 WED when the main WED attach failed
If the WED attach for the primary PCIe function fails, the probe path
still attached wed_hif2 for the secondary function, leaving the device
in an inconsistent half-WED configuration that crashes later. The hif2
call also re-enabled hwrro_mode, which the failed primary attach had
just turned off.
Skip the hif2 WED setup when the primary WED device is not active. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix double hif2 init on the non-WED path
mt7915_pci_init_hif2() was called unconditionally and again inside the
WED-inactive branch. The helper increments the global hif_idx, writes the
PCIe RECOG_ID register and takes a get_device() reference via
mt7915_pci_get_hif2(), while removal only drops one reference. On non-WED
dual-hif hardware this double-incremented hif_idx, wrote RECOG_ID twice and
leaked a device reference. Only the call inside the WED-inactive branch is
correct; drop the unconditional one. hif2 is already initialised to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix leak in ath11k_service_ready_ext_event()
Currently, during ath11k_service_ready_ext_event() processing,
svc_rdy_ext.mac_phy_caps can be allocated during TLV parsing. This is a
temporary allocation that is freed on the success path, but not on the
error path. If parsing succeeds far enough to allocate mac_phy_caps and
then fails on a later TLV, the allocation leaks. So free the allocation
on the error path.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: Unregister cpufreq notifier on init failure
acpi_processor_driver_init() registers the cpufreq policy notifier before
registering the ACPI processor driver and setting up CPU hotplug state.
If driver_register() or cpuhp_setup_state() fails, the error path only
unregisters the ACPI processor driver and the idle driver. The cpufreq
notifier remains registered even though initialization failed.
Mirror the module exit path on the init failure path and unregister the
cpufreq notifier when it has been registered. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: hold dev->mt76.mutex while disabling tx worker in SER
mt7996_mac_reset_work() parked the tx worker and disabled the RX/TX NAPIs
before taking dev->mt76.mutex. mt76_worker_disable()/_enable() are plain
kthread park/unpark, not refcounted, and __mt76_set_channel() toggles the
same worker and the MT76_RESET bit under the mutex. An L1 SER racing a
channel switch could therefore have the worker unparked and MT76_RESET
cleared while the reset path resets the DMA rings, corrupting descriptors
or tokens. Take the mutex before disabling the worker, as mt7915 does. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix out-of-bounds access in mmio copy helpers
mt76_mmio_write_copy() and mt76_mmio_read_copy() iterate up to
ALIGN(len, 4), so a length that is not a multiple of four reads past the
source buffer (write_copy) or writes past the destination (read_copy).
Copy the aligned body in the loop and handle the remaining tail through a
4-byte bounce buffer, keeping the register access width unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: avoid nss underflow in mt7915_mcu_get_sta_nss
If a peer's VHT/HE MCS map has no supported spatial stream (all fields
0x3), the loop exits with nss == 0 and the function returned (u8)-1 (255),
which was then written into the firmware sta_rec_bf beamforming fields.
Clamp the result to 0. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: clear wcid mask under mutex after RCU pointer clear
mt7915_remove_interface() cleared the wcid mask bit with no lock held and
before clearing the RCU wcid pointer. The mask is a non-atomic RMW shared
with the allocators, which all run under dev->mt76.mutex; on DBDC the two
wiphys share one mt76_dev, so this raced add_interface/sta_add on the
other band and could leak or double-hand-out a wcid. Clearing the bit
before the RCU pointer also let a concurrent allocation reuse the index
and publish its wcid, which the subsequent NULL assignment then wiped.
Move the clear into the existing mutex section, after the RCU pointer is
cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: validate RX band_idx before dereferencing phys[]
band_idx comes from a 2-bit descriptor field (0-3) and was used directly
to index dev->mt76.phys[] (size __MT_MAX_BAND == 3) and dereference the
result. A corrupt or reserved descriptor value could index out of bounds
or hit a NULL phy on parts with fewer bands. Reject invalid band indices,
mirroring mt7996_rx_get_wcid(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix potential UAF when reading bpf link info
In bpf_link_show_fdinfo and bpf_link_get_info_by_fd, link->prog is
accessed without holding any locks. If the prog is concurrently replaced
via bpf_link_update, the old prog can be freed, leading to a potential
UAF issue.
Fix this by accessing link->prog under RCU protection to safely fetch
the pointer and guarantee its lifetime while reading its fields. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix potential UAF in bpf_netns_link_update_prog
In bpf_netns_link_update_prog, the checks for old_prog and prog type
are currently performed locklessly before acquiring netns_bpf_mutex.
This creates a race condition that can lead to a UAF issue.
If two threads concurrently execute BPF_LINK_UPDATE on the same netns
link, the following execution path can trigger a UAF:
CPU0 CPU1
bpf_netns_link_update_prog
if (old_prog && old_prog != link->prog)
return -EPERM;
bpf_netns_link_update_prog
if (old_prog && old_prog != link->prog)
...
old_prog = xchg(&link->prog, new_prog);
bpf_prog_put(old_prog);
if (new_prog->type != link->prog->type) <-- trigger UAF
Fix this by moving the old_prog and prog->type checks inside the
netns_bpf_mutex critical section. Meanwhile, use guard() to simplify
lock management and avoid all the goto jumping. |
