| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Metrics::Any::Adapter::Statsd versions before 0.04 for Perl does not protect against metric injections.
The statsd protocol (and extensions) allow mutiple metrics, separated by newlines, to be sent per packet.
The send method does not validate the contents of the metric names or values. If the names have newlines and statsd control characters (colon, pipe) then metric injections are possible.
Version 0.04 fixed this by modifying the _make method to block metric names with characters below ASCII 32 (which includes the newline), or colons or pipes. |
| Etsy::StatsD versions through 1.002002 for Perl allow metric injections.
The metric names and values are not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics.
Note that the git repository contains an unreleased version with the gauge and set methods that also do not check for potential metric injections. |
| Mojolicious::Plugin::Statsd versions through 0.04 for Perl allowed metric injections.
The metric names and set values were not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics.
Version 0.06 changes the module from being a statsd client to using a separate statsd client. It defaults to using a version of Net::Statsd::Tiny that fixes a similar issue (CVE-2026-46720). |
| Net::Statsd versions before 0.13 for Perl allow metric injections.
The metric names are not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics.
The update_stats (used for updating counters) and gauge methods do not check that values are numeric (which would block metric injection). |
| Net::Statsd::Tiny versions before 0.3.8 for Perl allowed metric injections.
The metric names and set values were not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics. |
| Net::Statsd::Lite versions before 0.9.0 for Perl allowed metric injections.
The metric names were not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix uninit-value by validating catalog record size
Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The
root cause is that hfs_brec_read() doesn't validate that the on-disk
record size matches the expected size for the record type being read.
When mounting a corrupted filesystem, hfs_brec_read() may read less data
than expected. For example, when reading a catalog thread record, the
debug output showed:
HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26
HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ!
hfs_brec_read() only validates that entrylength is not greater than the
buffer size, but doesn't check if it's less than expected. It successfully
reads 26 bytes into a 520-byte structure and returns success, leaving 494
bytes uninitialized.
This uninitialized data in tmp.thread.nodeName then gets copied by
hfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggering
the KMSAN warning when the uninitialized bytes are used as array indices
in case_fold().
Fix by introducing hfsplus_brec_read_cat() wrapper that:
1. Calls hfs_brec_read() to read the data
2. Validates the record size based on the type field:
- Fixed size for folder and file records
- Variable size for thread records (depends on string length)
3. Returns -EIO if size doesn't match expected
For thread records, check against HFSPLUS_MIN_THREAD_SZ before reading
nodeName.length to avoid reading uninitialized data at call sites that
don't zero-initialize the entry structure.
Also initialize the tmp variable in hfsplus_find_cat() as defensive
programming to ensure no uninitialized data even if validation is
bypassed. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix missing last_unlink_trans update when removing a directory
When removing a directory we are not updating its last_unlink_trans field,
which can result in incorrect fsync behaviour in case some one fsyncs the
directory after it was removed because it's holding a file descriptor on
it.
Example scenario:
mkdir /mnt/dir1
mkdir /mnt/dir1/dir2
mkdir /mnt/dir3
sync -f /mnt
# Do some change to the directory and fsync it.
chmod 700 /mnt/dir1
xfs_io -c fsync /mnt/dir1
# Move dir2 out of dir1 so that dir1 becomes empty.
mv /mnt/dir1/dir2 /mnt/dir3/
open fd on /mnt/dir1
call rmdir(2) on path "/mnt/dir1"
fsync fd
<trigger power failure>
When attempting to mount the filesystem, the log replay will fail with
an -EIO error and dmesg/syslog has the following:
[445771.626482] BTRFS info (device dm-0): first mount of filesystem 0368bbea-6c5e-44b5-b409-09abe496e650
[445771.626486] BTRFS info (device dm-0): using crc32c checksum algorithm
[445771.627912] BTRFS info (device dm-0): start tree-log replay
[445771.628335] page: refcount:2 mapcount:0 mapping:0000000061443ddc index:0x1d00 pfn:0x7072a5
[445771.629453] memcg:ffff89f400351b00
[445771.629892] aops:btree_aops [btrfs] ino:1
[445771.630737] flags: 0x17fffc00000402a(uptodate|lru|private|writeback|node=0|zone=2|lastcpupid=0x1ffff)
[445771.632359] raw: 017fffc00000402a fffff47284d950c8 fffff472907b7c08 ffff89f458e412b8
[445771.633713] raw: 0000000000001d00 ffff89f6c51d1a90 00000002ffffffff ffff89f400351b00
[445771.635029] page dumped because: eb page dump
[445771.635825] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=10 ino=258, invalid nlink: has 2 expect no more than 1 for dir
[445771.638088] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14878 owner 5
[445771.638091] BTRFS info (device dm-0): refs 4 lock_owner 0 current 3581087
[445771.638094] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160
[445771.638097] inode generation 3 transid 9 size 16 nbytes 16384
[445771.638098] block group 0 mode 40755 links 1 uid 0 gid 0
[445771.638100] rdev 0 sequence 2 flags 0x0
[445771.638102] atime 1775744884.0
[445771.660056] ctime 1775744885.645502983
[445771.660058] mtime 1775744885.645502983
[445771.660060] otime 1775744884.0
[445771.660062] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12
[445771.660064] index 0 name_len 2
[445771.660066] item 2 key (256 DIR_ITEM 1843588421) itemoff 16077 itemsize 34
[445771.660068] location key (259 1 0) type 2
[445771.660070] transid 9 data_len 0 name_len 4
[445771.660075] item 3 key (256 DIR_ITEM 2363071922) itemoff 16043 itemsize 34
[445771.660076] location key (257 1 0) type 2
[445771.660077] transid 9 data_len 0 name_len 4
[445771.660078] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34
[445771.660079] location key (257 1 0) type 2
[445771.660080] transid 9 data_len 0 name_len 4
[445771.660081] item 5 key (256 DIR_INDEX 3) itemoff 15975 itemsize 34
[445771.660082] location key (259 1 0) type 2
[445771.660083] transid 9 data_len 0 name_len 4
[445771.660084] item 6 key (257 INODE_ITEM 0) itemoff 15815 itemsize 160
[445771.660086] inode generation 9 transid 9 size 8 nbytes 0
[445771.660087] block group 0 mode 40777 links 1 uid 0 gid 0
[445771.660088] rdev 0 sequence 2 flags 0x0
[445771.660089] atime 1775744885.641174097
[445771.660090] ctime 1775744885.645502983
[445771.660091] mtime 1775744885.645502983
[445771.660105] otime 1775744885.641174097
[445771.660106] item 7 key (257 INODE_REF 256) itemoff 15801 itemsize 14
[445771.660107] index 2 name_len 4
[445771.660108] item 8 key (257 DIR_ITEM 2676584006) itemoff 15767 itemsize 34
[445771.660109] location key (2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dm-thin: fix metadata refcount underflow
There's a bug in dm-thin in the function rebalance_children. If the
internal btree node has one entry, the code tries to copy all btree
entries from the node's child to the node itself and then decrement the
child's reference count.
If the child node is shared (it has reference count > 1), we won't free
it, so there would be two pointers to each of the grandchildren nodes.
But the reference counts of the grandchildren is not increased, thus the
reference count doesn't match the number of pointers that point to the
grandchildren. This results in "device mapper: space map common: unable
to decrement block" errors.
Fix this bug by incrementing reference counts on the grandchildren if the
btree node is shared. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix a resource leak in xfs_alloc_buftarg()
In the error path, call fs_put_dax() to drop the DAX
device reference. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: fix use-after-free on unbind
The SPI subsystem frees the controller and any subsystem allocated
driver data as part of deregistration (unless the allocation is device
managed).
Take another reference before deregistering the controller so that the
driver data is not freed until the driver is done with it. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: fix active_num_conn leak on transport allocation failure
Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in
ksmbd_tcp_new_connection()") addressed the kthread_run() failure
path. The earlier alloc_transport() == NULL path in the same
function has the same leak, is reachable pre-authentication via any
TCP connect to port 445, and was empirically reproduced on UML
(ARCH=um, v7.0-rc7): a small number of forced allocation failures
were sufficient to put ksmbd into a state where every subsequent
connection attempt was rejected for the remainder of the boot.
ksmbd_kthread_fn() increments active_num_conn before calling
ksmbd_tcp_new_connection() and discards the return value, so when
alloc_transport() returns NULL the socket is released and -ENOMEM
returned without decrementing the counter. Each such failure
permanently consumes one slot from the max_connections pool; once
cumulative failures reach the cap, atomic_inc_return() hits the
threshold on every subsequent accept and every new connection is
rejected. The counter is only reset by module reload.
An unauthenticated remote attacker can drive the server toward the
memory pressure that makes alloc_transport() fail by holding open
connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN
(0x00FFFFFF); natural transient allocation failures on a loaded
host produce the same drift more slowly.
Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the
alloc_transport() failure path, decrement active_num_conn gated on
server_conf.max_connections.
Repro details: with the patch reverted, forced alloc_transport()
NULL returns leaked counter slots and subsequent connection
attempts -- including legitimate connects issued after the
forced-fail window had closed -- were all rejected with "Limit the
maximum number of connections". With this patch applied, the same
connect sequence produces no rejections and the counter cycles
cleanly between zero and one on every accept. |
| In Spring AI Vector Stores, special characters could be used to force the execution of arbitrary queries in Elasticsearch, OpenSearch, and GemFire VectorDB. Affected components: spring-ai-elasticsearch-store, spring-ai-opensearch-store, spring-ai-gemfire-store.
Affected versions:
Spring AI 1.0.0 through 1.0.x (fix 1.0.9).
Spring AI 1.1.0 through 1.1.x (fix 1.1.8). |
| Vulnerability in the MySQL Shell product of Oracle MySQL (component: Shell for VS Code). The supported version that is affected is 2026.2.0+9.6.1. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise MySQL Shell. While the vulnerability is in MySQL Shell, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of MySQL Shell. CVSS 3.1 Base Score 9.9 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in the PeopleSoft Enterprise CS Campus Community product of Oracle PeopleSoft (component: Security). The supported version that is affected is 9.2.38. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise CS Campus Community. Successful attacks of this vulnerability can result in takeover of PeopleSoft Enterprise CS Campus Community. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| Object lifecycle issue in Metrics in Google Chrome prior to 149.0.7827.155 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Impact:
Undici's HTTP/1.1 client is vulnerable to response queue poisoning on reused keep-alive sockets. An attacker-controlled upstream server can inject an unsolicited HTTP/1.1 response onto an idle socket after a request completes. When the client dispatches the next request on that socket, it associates the injected response with the new request, causing responses to be delivered to the wrong requests.
This requires an attacker-controlled or compromised upstream HTTP/1.1 server and keep-alive connection reuse.
Patches:
Upgrade to undici v6.26.0, v7.28.0 or v8.5.0.
Workarounds:
Disable keep-alive connection reuse by setting keepAliveTimeout: 0 on the Client or Pool. |
| CakePHP is a rapid development framework for PHP. In versions 4.5.11 and earlier, 4.6.0 through 4.6.3, 5.0.0 through 5.1.6, 5.2.0 through 5.2.12, and 5.3.0 through 5.3.5, View::_getElementFileName() does not check that the resolved element path is within the application/plugin view template paths. When element names are created with specifically crafted user-supplied data this weakness can be leveraged to include other PHP files on the server. Patched releases are available in 5.3.6, 5.2.13, 5.1.7, 4.6.4, and 4.5.11. |
| TypeBot is a chatbot builder tool. In versions prior to 3.17.2, SSRF validation is implemented by resolving a hostname once and checking whether the resolved IP belongs to a forbidden range allowing for DNS rebinding bypass. The root cause is a time-of-check to time-of-use gap in the SSRF guard. The validator resolves the hostname and approves it, but the later request path performs a fresh resolution and connects to whatever IP the hostname maps to at that moment. The actual outbound request is then performed later using the original hostname, without pinning the validated IP to the network connection. An attacker who can supply a URL to a public bot that performs a server-side HTTP Request block or server-side script fetch can use DNS rebinding to pass the initial validation and still force the server to connect to a private or metadata address during the real request. This enables server-side access to private network services, cloud metadata endpoints, and other internal HTTP targets that the validator was intended to block. The exact downstream impact depends on the reachable internal services. Concrete consequences include metadata disclosure, access to internal admin panels, credential theft from metadata services, and further compromise through internal-only HTTP interfaces. This issue has been fixed in version 3.17.2. |
| Inappropriate implementation in Passwords in Google Chrome prior to 149.0.7827.155 allowed a remote attacker who convinced a user to engage in specific UI gestures to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) |
