| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue was discovered on certain GL-iNet devices, including MT6000, MT3000, MT2500, AXT1800, and AX1800 4.6.2. Users who belong to unauthorized groups can invoke any interface of the device, thereby gaining complete control over it. |
| Listmonk v4.1.0 (fixed in v5.0.0) is vulnerable to SQL Injection in the QuerySubscribers function which allows attackers to escalate privileges. |
| An issue was discovered on certain GL-iNet devices, including MT6000, MT3000, MT2500, AXT1800, and AX1800 4.6.2. The SID generated for a specific user is not tied to that user itself, which allows other users to potentially use it for authentication. Once an attacker bypasses the application's authentication procedures, they can generate a valid SID, escalate privileges, and gain full control. |
| An issue was discovered on certain GL-iNet devices, including MT6000, MT3000, MT2500, AXT1800, and AX1800 4.6.2. The params parameter in the call method of the /rpc endpoint is vulnerable to arbitrary directory traversal, which enables attackers to execute scripts under any path. |
| An issue was discovered in libexpat before 2.6.4. There is a crash within the XML_ResumeParser function because XML_StopParser can stop/suspend an unstarted parser. |
| Meshtastic firmware is a device firmware for the Meshtastic project. The Meshtastic firmware does not check for packets claiming to be from the special broadcast address (0xFFFFFFFF) which could result in unexpected behavior and potential for DDoS attacks on the network. A malicious actor could craft a packet to be from that address which would result in an amplification of this one message into every node on the network sending multiple messages. Such an attack could result in degraded network performance for all users as the available bandwidth is consumed. This issue has been addressed in release version 2.5.6. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Improperly Controlled Modification of Object Prototype Attributes ('Prototype Pollution') vulnerability in Mozilla Convict.
This allows an attacker to inject attributes that are used in other components, or to override existing attributes with ones that have incompatible type, which may lead to a crash.
The main use case of Convict is for handling server-side
configurations written by the admins owning the servers, and not random
users. So it's unlikely that an admin would deliberately sabotage their
own server. Still, a situation can happen where an admin not
knowledgeable about JavaScript could be tricked by an attacker into
writing the malicious JavaScript code into some config files.
This issue affects Convict: before 6.2.4. |
| On Linux the sccache client can execute arbitrary code with the privileges of a local sccache server, by preloading the code in a shared library passed to LD_PRELOAD.
If the server is run as root (which is the default when installing the snap package https://snapcraft.io/sccache ), this means a user running the sccache client can get root privileges. |
| An issue was discovered in Django 5.2 before 5.2.3, 5.1 before 5.1.11, and 4.2 before 4.2.23. Internal HTTP response logging does not escape request.path, which allows remote attackers to potentially manipulate log output via crafted URLs. This may lead to log injection or forgery when logs are viewed in terminals or processed by external systems. |
| A vulnerability was found in InvoicePlane up to 1.6.1. It has been declared as critical. This vulnerability affects the function upload_file of the file /index.php/upload/upload_file/1/1. The manipulation of the argument file leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.6.2-beta-1 is able to address this issue. It is recommended to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 HTTP Decoder that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart.
This vulnerability is due to a lack of complete error checking when the MIME fields of the HTTP header are parsed. An attacker could exploit this vulnerability by sending crafted HTTP packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine unexpectedly restarts. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 HTTP Decoder that could allow an unauthenticated, remote attacker to cause the disclosure of possible sensitive data or cause the Snort 3 Detection Engine to crash.
This vulnerability is due to an error in the logic of buffer handling when the MIME fields of the HTTP header are parsed. This can result in a buffer under-read. An attacker could exploit this vulnerability by sending crafted HTTP packets through an established connection that is parsed by Snort 3. A successful exploit could allow the attacker to induce one of two possible outcomes: the unexpected restarting of the Snort 3 Detection Engine, which could cause a denial of service (DoS) condition, or information disclosure of sensitive information in the Snort 3 data stream. Due to the under-read condition, it is possible that sensitive information that is not valid connection data could be returned. |
| A vulnerability in the web UI of Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 running Cisco SIP Software could allow an unauthenticated, remote attacker to conduct XSS attacks against a user of the web UI.
This vulnerability exists because the web UI of an affected device does not sufficiently validate user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
Note: To exploit this vulnerability, the phone must be registered to Cisco Unified Communications Manager and have Web Access enabled. Web Access is disabled by default. |
| A vulnerability in the web UI of Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 running Cisco SIP Software could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device.
This vulnerability is due to a buffer overflow when an affected device processes HTTP packets. An attacker could exploit this vulnerability by sending crafted HTTP input to the device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Note: To exploit this vulnerability, the phone must be registered to Cisco Unified Communications Manager and have Web Access enabled. Web Access is disabled by default. |
| A vulnerability was found in InvoicePlane up to 1.6.1. It has been classified as problematic. This affects the function download of the file invoices.php. The manipulation of the argument invoice leads to path traversal. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.6.2-beta-1 is able to address this issue. It is recommended to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| A vulnerability in the logging component of Cisco TelePresence Collaboration Endpoint (CE) and Cisco RoomOS Software could allow an authenticated, remote attacker to view sensitive information in clear text on an affected system. To exploit this vulnerability, the attacker must have valid administrative credentials.
This vulnerability exists because certain unencrypted credentials are stored when SIP media component logging is enabled. An attacker could exploit this vulnerability by accessing the audit logs on an affected system and obtaining credentials to which they may not normally have access. A successful exploit could allow the attacker to use those credentials to access confidential information, some of which may contain personally identifiable information (PII).
Note: To access the logs that are stored in the Webex Cloud or stored on the device itself, an attacker must have valid administrative credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: check if iowq is killed before queuing
task work can be executed after the task has gone through io_uring
termination, whether it's the final task_work run or the fallback path.
In this case, task work will find ->io_wq being already killed and
null'ed, which is a problem if it then tries to forward the request to
io_queue_iowq(). Make io_queue_iowq() fail requests in this case.
Note that it also checks PF_KTHREAD, because the user can first close
a DEFER_TASKRUN ring and shortly after kill the task, in which case
->iowq check would race. |
| In the Linux kernel, the following vulnerability has been resolved:
net: netdevsim: fix nsim_pp_hold_write()
nsim_pp_hold_write() has two problems:
1) It may return with rtnl held, as found by syzbot.
2) Its return value does not propagate an error if any. |
| In the Linux kernel, the following vulnerability has been resolved:
ionic: no double destroy workqueue
There are some FW error handling paths that can cause us to
try to destroy the workqueue more than once, so let's be sure
we're checking for that.
The case where this popped up was in an AER event where the
handlers got called in such a way that ionic_reset_prepare()
and thus ionic_dev_teardown() got called twice in a row.
The second time through the workqueue was already destroyed,
and destroy_workqueue() choked on the bad wq pointer.
We didn't hit this in AER handler testing before because at
that time we weren't using a private workqueue. Later we
replaced the use of the system workqueue with our own private
workqueue but hadn't rerun the AER handler testing since then. |
| A vulnerability was found in SingMR HouseRent 1.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file src/main/java/com/house/wym/controller/AdminController.java. The manipulation leads to improper access controls. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. |
