| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Privilege escalation due to invalid pointer in the Graphics component. This vulnerability was fixed in Firefox 155, Firefox ESR 115.40, Firefox ESR 140.15, Firefox ESR 153.2, Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2. |
| Internally found bugs present in Thunderbird 154, Thunderbird ESR 153.1 and Thunderbird ESR 140.14. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 155, Firefox ESR 115.40, Firefox ESR 140.15, Firefox ESR 153.2, Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) reject short block-read responses in the GPIO accessors
adm1266_gpio_get() and adm1266_gpio_get_multiple() both compose the
pin-status word as
pins_status = read_buf[0] + (read_buf[1] << 8);
right after i2c_smbus_read_block_data(), guarding only against an
error return. A well-behaved device returns 2 bytes for
GPIO_STATUS/PDIO_STATUS, but the helper happily reports a 0- or
1-byte response too. If the device returns 0 bytes, both read_buf
slots are uninitialized stack memory; if it returns 1 byte, read_buf[1]
is.
The composed value then flows through set_bit() into the caller's
*bits in adm1266_gpio_get_multiple(), or into the return value of
adm1266_gpio_get(), and ends up in userspace via gpiolib (sysfs and
the char-dev ioctls). That leaks a few bits of kernel stack per
request on any device whose firmware glitch, bus error, or hostile
slave produces a short block-read response.
Add the missing length check to both call sites and surface a short
response as -EIO. |
| Incorrect Authorization (CWE-863) in the Kibana machine learning feature can lead to unauthorized resource consumption via Exploiting Incorrectly Configured Access Control Security Levels (CAPEC-180). An authenticated user could invoke machine learning functionality beyond their authorization scope, consuming cluster resources they should not be able to reach. |
| The mobile Smart Connect dashboard UI was subject to manipulation
by 3rd party apps. When paired with a phishing attack, this manipulation could
result in escalated privileges of an attacker within the system. |
| Nuclio is a "Serverless" framework for Real-Time Events and Data Processing. Prior to version 1.16.0, there is a vulnerability in Nuclio Dashboard's project management API, allowing any authenticated user (without membership in the target project) to bypass OPA authorization checks on write paths (PUT /api/projects/{id}, DELETE /api/projects) and modify or delete any project along with all its associated resources (functions, API gateways, etc.). This issue has been patched in version 1.16.0. |
| An unauthenticated SQL injection vulnerability exists in Sangoma Switchvox SMB Edition 8.3 (104997). The /pa endpoint processes XML content beginning with <PolycomIPPhone> and directly concatenates the user-controlled PhoneIP value into PostgreSQL queries without sanitization or parameterization. An unauthenticated remote attacker can execute arbitrary SQL statements against the backend PostgreSQL database using a single crafted request, including database operations and remote code execution. |
| GROWI contains an access control vulnerability in the GET /_api/v3/attachment/:id endpoint that fails to validate page access permissions. Authenticated attackers can retrieve attachment metadata from pages they cannot view by supplying known attachment identifiers. |
| The WPvivid — Backup, Migration & Staging WordPress plugin before 0.9.133 does not sanitise a user supplied list of identifiers before using it in a SQL query, allowing administrators to perform SQL injection attacks. |
| Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in Teracity Software Technologies Inc. E-OSB allows SQL Injection.
This issue affects E-OSB: before V02.26.07.08.01. |
| Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in TRtek Technological Products Computer Software Hardware Industry and Trade Limited Company Products's Store allows SQL Injection.
This issue affects Products's Store: before 030631b2. |
| Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in TMT Machine Industry and Trade Ltd. Co. Talassoft Industrial Management Software allows SQL Injection.
This issue affects Talassoft Industrial Management Software: from V.4 before V.16. |
| A privilege escalation vulnerability exists in the API of HPE Networking Fabric Composer. Successful exploitation could allow an authenticated low privilege operator user to escalate their permissions to those of an administrative user, leading to complete system compromise. |
| Privilege escalation vulnerabilities exist in the API of HPE Networking Fabric Composer. Successful exploitation could allow an authenticated low privilege operator user to complete state-changing actions that should not be allowed by their current level of authorization on the platform, including changes to the configuration of systems managed by the affected product. |
| A business logic vulnerability exists in the API of HPE Networking Fabric Composer. Successful exploitation could allow an authenticated low privilege operator user to obtain elevated privileges and modify settings beyond what is authorized by the user's existing privilege level on a vulnerable system. |
| Vulnerabilities in the API of HPE Networking Fabric Composer could allow an authenticated remote attacker to conduct SQL injection attacks against the HPE Networking Fabric Composer instance. An attacker could exploit these vulnerabilities to obtain and modify sensitive information in the underlying database potentially leading to complete compromise of the HPE Networking Fabric Composer host. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Make RX SKB per-port
The SKB used to assemble packets from fragments in gmac_rx()
is static local, but the Gemini has two ethernet ports, meaning
there can be races between the ports on a bad day if a device
is using both.
Make the RX SKB a per-port variable and carry it over between
invocations in the port struct instead.
Zero the pointer once we call napi_gro_frags(), on error (after
calling napi_free_frags()) or if the port is stopped.
Zero it in some place where not strictly necessary just to
emphasize what is going on.
This was found by Sashiko during normal patch review. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix early put of sink folio in netfs_read_gaps()
Fix netfs_read_gaps() to release the sink page it uses after waiting for
the request to complete. The way the sink page is used is that an
ITER_BVEC-class iterator is created that has the gaps from the target folio
at either end, but has the sink page tiled over the middle so that a single
read op can fill in both gaps.
The bug was found by KASAN detecting a UAF on the generic/075 xfstest in
the cifsd kernel thread that handles reception of data from the TCP socket:
BUG: KASAN: use-after-free in _copy_to_iter+0x48a/0xa20
Write of size 885 at addr ffff888107f92000 by task cifsd/1285
CPU: 2 UID: 0 PID: 1285 Comm: cifsd Not tainted 7.0.0 #6 PREEMPT(lazy)
Call Trace:
dump_stack_lvl+0x5d/0x80
print_report+0x17f/0x4f1
kasan_report+0x100/0x1e0
kasan_check_range+0x10f/0x1e0
__asan_memcpy+0x3c/0x60
_copy_to_iter+0x48a/0xa20
__skb_datagram_iter+0x2c9/0x430
skb_copy_datagram_iter+0x6e/0x160
tcp_recvmsg_locked+0xce0/0x1130
tcp_recvmsg+0xeb/0x300
inet_recvmsg+0xcf/0x3a0
sock_recvmsg+0xea/0x100
cifs_readv_from_socket+0x3a6/0x4d0 [cifs]
cifs_read_iter_from_socket+0xdd/0x130 [cifs]
cifs_readv_receive+0xaad/0xb10 [cifs]
cifs_demultiplex_thread+0x1148/0x1740 [cifs]
kthread+0x1cf/0x210 |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix potential deadlock in write-through mode
Fix netfs_advance_writethrough() to always unlock the supplied folio and to
mark it dirty if it isn't yet written to the end. Unfortunately, it can't
be marked for writeback until the folio is done with as that may cause a
deadlock against mmapped reads and writes.
Even though it has been marked dirty, premature writeback can't occur as
the caller is holding both inode->i_rwsem (which will prevent concurrent
truncation, fallocation, DIO and other writes) and ictx->wb_lock (which
will cause flushing to wait and writeback to skip or wait).
Note that this may be easier to deal with once the queuing of folios is
split from the generation of subrequests. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: respect peer refcount in CMD_NEW_PEER error path
ovpn_nl_peer_new_doit()'s error path calls ovpn_peer_release() directly
rather than ovpn_peer_put(), bypassing the kref. The accompanying
comment ("peer was not yet hashed, thus it is not used in any context")
holds for UDP but not for TCP.
For UDP, the ovpn_socket union uses the .ovpn arm and never points back
at a peer; UDP encap_recv looks up peers via the not-yet-populated
hashtables, so the new peer is unreachable until ovpn_peer_add()
publishes it.
For TCP, ovpn_socket_new() sets ovpn_sock->peer and
ovpn_tcp_socket_attach() publishes ovpn_sock via rcu_assign_sk_user_data().
From that moment until ovpn_socket_release() detaches in the error path,
the TCP fd is fully wired: userspace recvmsg / sendmsg / close / poll
on the fd, as well as the strparser-driven ovpn_tcp_rcv() path, can
reach the peer through sk_user_data -> ovpn_sock->peer and bump its
refcount via ovpn_peer_hold().
ovpn_tcp_socket_wait_finish() (called inside ovpn_socket_release())
drains strparser and the tx work, but does not synchronize with
userspace syscall callers that already hold a peer reference. If
ovpn_nl_peer_modify() or ovpn_peer_add() returns an error while such
a caller is in flight - notably an ovpn_tcp_recvmsg() blocked in
__skb_recv_datagram() on peer->tcp.user_queue - the direct
ovpn_peer_release() destroys the peer while the caller still holds
the reference, and the eventual ovpn_peer_put() from that caller
operates on freed memory.
Replace the direct destructor call with ovpn_peer_put() so the kref
correctly defers destruction until the last reference is dropped.
In the common case where no concurrent user is present, behaviour is
unchanged: the kref hits zero immediately and ovpn_peer_release_kref()
runs the same destructor.
With this conversion ovpn_peer_release() has no callers outside peer.c
- ovpn_peer_release_kref() in the same translation unit is the only
remaining user - so make it static and drop its declaration from
peer.h. |
