| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An insecure permissions vulnerability in verydows v2.0 allows a remote attacker to execute arbitrary code by uploading a file type. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/kprobes: Fix null pointer reference in arch_prepare_kprobe()
I found a null pointer reference in arch_prepare_kprobe():
# echo 'p cmdline_proc_show' > kprobe_events
# echo 'p cmdline_proc_show+16' >> kprobe_events
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc000000000050bfc
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 122 Comm: sh Not tainted 6.0.0-rc3-00007-gdcf8e5633e2e #10
NIP: c000000000050bfc LR: c000000000050bec CTR: 0000000000005bdc
REGS: c0000000348475b0 TRAP: 0300 Not tainted (6.0.0-rc3-00007-gdcf8e5633e2e)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 88002444 XER: 20040006
CFAR: c00000000022d100 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 0
...
NIP arch_prepare_kprobe+0x10c/0x2d0
LR arch_prepare_kprobe+0xfc/0x2d0
Call Trace:
0xc0000000012f77a0 (unreliable)
register_kprobe+0x3c0/0x7a0
__register_trace_kprobe+0x140/0x1a0
__trace_kprobe_create+0x794/0x1040
trace_probe_create+0xc4/0xe0
create_or_delete_trace_kprobe+0x2c/0x80
trace_parse_run_command+0xf0/0x210
probes_write+0x20/0x40
vfs_write+0xfc/0x450
ksys_write+0x84/0x140
system_call_exception+0x17c/0x3a0
system_call_vectored_common+0xe8/0x278
--- interrupt: 3000 at 0x7fffa5682de0
NIP: 00007fffa5682de0 LR: 0000000000000000 CTR: 0000000000000000
REGS: c000000034847e80 TRAP: 3000 Not tainted (6.0.0-rc3-00007-gdcf8e5633e2e)
MSR: 900000000280f033 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 44002408 XER: 00000000
The address being probed has some special:
cmdline_proc_show: Probe based on ftrace
cmdline_proc_show+16: Probe for the next instruction at the ftrace location
The ftrace-based kprobe does not generate kprobe::ainsn::insn, it gets
set to NULL. In arch_prepare_kprobe() it will check for:
...
prev = get_kprobe(p->addr - 1);
preempt_enable_no_resched();
if (prev && ppc_inst_prefixed(ppc_inst_read(prev->ainsn.insn))) {
...
If prev is based on ftrace, 'ppc_inst_read(prev->ainsn.insn)' will occur
with a null pointer reference. At this point prev->addr will not be a
prefixed instruction, so the check can be skipped.
Check if prev is ftrace-based kprobe before reading 'prev->ainsn.insn'
to fix this problem.
[mpe: Trim oops] |
| Jan v0.5.14 and before is vulnerable to remote code execution (RCE) when the user clicks on a rendered link in the conversation, due to opening external website in the app and the exposure of electronAPI, with a lack of filtering of URL when calling shell.openExternal(). |
| Git GUI allows you to use the Git source control management tools via a GUI. A malicious repository can ship versions of sh.exe or typical textconv filter programs such as astextplain. Due to the unfortunate design of Tcl on Windows, the search path when looking for an executable always includes the current directory. The mentioned programs are invoked when the user selects Git Bash or Browse Files from the menu. This vulnerability is fixed in 2.43.7, 2.44.4, 2.45.4, 2.46.4, 2.47.3, 2.48.2, 2.49.1, and 2.50.1. |
| Textpattern versions prior to 4.8.3 contain an authenticated remote code execution vulnerability that allows logged-in users to upload malicious PHP files. Attackers can upload a PHP file with a shell command execution payload and execute arbitrary commands by accessing the uploaded file through a specific URL parameter. |
| Chamilo LMS 1.11.8 contains an arbitrary file upload vulnerability that allows authenticated users to upload and execute PHP files through the elfinder filemanager module. Attackers can upload files with image headers in the social myfiles section, rename them to PHP extensions, and execute arbitrary code by accessing the uploaded files. |
| Hitachi Ops Center Common Services within Hitachi Ops Center Analyzer viewpoint OVF contains an authentication credentials leakage vulnerability.This issue affects Hitachi Ops Center Common Services: from 10.0.0-00 before 11.0.0-04; Hitachi Ops Center Analyzer viewpoint OVF: from 10.0.0-00 before 11.0.0-04. |
| pyLoad is a free and open-source Download Manager written in pure Python. In version 0.5.0b3.dev89, an authenticated path traversal vulnerability exists in the /json/upload endpoint of pyLoad. By manipulating the filename of an uploaded file, an attacker can traverse out of the intended upload directory, allowing them to write arbitrary files to any location on the system accessible to the pyLoad process. This may lead to: Remote Code Execution (RCE), local privilege escalation, system-wide compromise, persistence, and backdoors. This is fixed in version 0.5.0b3.dev90. |
| A vulnerability classified as critical was found in Contemporary Control System BASrouter BACnet BASRT-B 2.7.2. This vulnerability affects unknown code of the component Application Protocol Data Unit. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-263890 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| An issue was discovered in the Cargo extension for MediaWiki through 1.39.3. There is mishandling of backticks to smartSplit. |
| eBeam Education Suite 2.5.0.9 contains an unquoted service path vulnerability in the eBeam Device Service that allows local users to potentially execute code with elevated privileges. Attackers can exploit the unquoted path in the service configuration to inject malicious code that would execute with LocalSystem privileges during service startup. |
| KMSpico 17.1.0.0 contains an unquoted service path vulnerability in the Service KMSELDI configuration that allows local attackers to potentially execute arbitrary code. Attackers can exploit the unquoted binary path in C:\Program Files\KMSpico\Service_KMS.exe to inject malicious executables and escalate privileges. |
| Magic Mouse 2 Utilities 2.20 contains an unquoted service path vulnerability in its Windows service configuration. Attackers can exploit the unquoted path to inject malicious executables and gain elevated system privileges by placing a malicious file in the service path. |
| Litestar is an Asynchronous Server Gateway Interface (ASGI) framework. In versions 2.10.0 and prior, Litestar's `docs-preview.yml` workflow is vulnerable to Environment Variable injection which may lead to secret exfiltration and repository manipulation. This issue grants a malicious actor the permission to write issues, read metadata, and write pull requests. In addition, the `DOCS_PREVIEW_DEPLOY_TOKEN` is exposed to the attacker. Commit 84d351e96aaa2a1338006d6e7221eded161f517b contains a fix for this issue. |
| GeoGebra Graphing Calculator 6.0.631.0 contains a denial of service vulnerability that allows attackers to crash the application by inputting an oversized buffer. Attackers can generate a payload of 8000 repeated characters to overwhelm the input field and cause the application to become unresponsive. |
| The Bit Form plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the 'iconUpload' function in all versions up to, and including, 2.13.3. This makes it possible for authenticated attackers, with administrator-level and above permissions, to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| Initialization of a resource with an insecure default vulnerability in OET-213H-BTS1 sold in Japan by Atsumi Electric Co., Ltd. allows a network-adjacent unauthenticated attacker to configure and control the affected product. |
| texlive-bin commit c515e was discovered to contain heap buffer overflow via the function ttfLoadHDMX:ttfdump. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted TTF file. |
| The All-Images.ai – IA Image Bank and Custom Image creation plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the '_get_image_by_url' function in all versions up to, and including, 1.0.4. This makes it possible for authenticated attackers, with Subscriber-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| The tagDiv Opt-In Builder plugin is vulnerable to Blind SQL Injection via the 'couponId' parameter of the 'recreate_stripe_subscription' REST API endpoint in versions up to, and including, 1.4.4 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers with administrator-level privileges to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
