| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: pci: ivtv: Add check for DMA map result
In case DMA fails, 'dma->SG_length' is 0. This value is later used to
access 'dma->SGarray[dma->SG_length - 1]', which will cause out of
bounds access.
Add check to return early on invalid value. Adjust warnings accordingly.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: make __free(kfree) accept error pointers
Currently, if an automatically freed allocation is an error pointer that
will lead to a crash. An example of this is in wm831x_gpio_dbg_show().
171 char *label __free(kfree) = gpiochip_dup_line_label(chip, i);
172 if (IS_ERR(label)) {
173 dev_err(wm831x->dev, "Failed to duplicate label\n");
174 continue;
175 }
The auto clean up function should check for error pointers as well,
otherwise we're going to keep hitting issues like this. |
| A security vulnerability has been detected in LibreWolf up to 143.0.4-1 on Windows. This affects an unknown function of the file assets/setup.nsi of the component Installer. Such manipulation leads to uncontrolled search path. The attack must be carried out locally. Attacks of this nature are highly complex. The exploitability is reported as difficult. Upgrading to version 144.0-1 mitigates this issue. The name of the patch is dd10e31dd873e9cb309fad8aed921d45bf905a55. It is suggested to upgrade the affected component. |
| A vulnerability was determined in ChurchCRM up to 5.18.0. This issue affects some unknown processing of the file src/ChurchCRM/Backup/RestoreJob.php of the component Backup Restore Handler. Executing manipulation of the argument restoreFile can lead to path traversal. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in ChurchCRM up to 5.18.0. This vulnerability affects unknown code of the file setup/routes/setup.php. Performing manipulation of the argument DB_PASSWORD/ROOT_PATH/URL results in deserialization. The attack may be initiated remotely. The attack's complexity is rated as high. It is stated that the exploitability is difficult. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| rplay through 3.3.2 allows attackers to cause a denial of service (SIGSEGV and daemon crash) or possibly have unspecified other impact. This occurs in memcpy in the RPLAY_DATA case in rplay_unpack in librplay/rplay.c, potentially reachable via packet data with no authentication. |
| A flaw has been found in Tomofun Furbo 360 and Furbo Mini. This issue affects some unknown processing of the component GATT Service. This manipulation of the argument DeviceToken causes information disclosure. The attack is only possible within the local network. A high degree of complexity is needed for the attack. The exploitability is assessed as difficult. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in Tomofun Furbo 360 and Furbo Mini. This vulnerability affects unknown code of the component GATT Service. The manipulation results in improper access controls. The attack can only be performed from the local network. The exploit is now public and may be used. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in Tomofun Furbo Mobile App up to 7.57.0a on Android. This affects an unknown part of the component Authentication Token Handler. The manipulation leads to insecure storage of sensitive information. It is possible to launch the attack on the physical device. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Apache Geode is vulnerable to CSRF attacks through GET requests to the Management and Monitoring REST API that could allow an attacker who has tricked a user into giving up their Geode session credentials to submit malicious commands on the target system on behalf of the authenticated user.
This issue affects Apache Geode: versions 1.10 through 1.15.1
Users are recommended to upgrade to version 1.15.2, which fixes the issue. |
| The Related Posts Lite plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 1.12 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| The Theme Editor plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 3.0. This is due to missing or incorrect nonce validation on the 'theme_editor_theme' page. This makes it possible for unauthenticated attackers to achieve remote code execution via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| A vulnerability has been found in Nixdorf Wincor PORT IO Driver up to 1.0.0.1. This affects the function sub_11100 in the library wnport.sys of the component IOCTL Handler. Such manipulation leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. Upgrading to version 3.0.0.1 is able to mitigate this issue. Upgrading the affected component is recommended. The vendor was contacted beforehand and was able to provide a patch very early. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Fix use-after-free in tb_dp_dprx_work
The original code relies on cancel_delayed_work() in tb_dp_dprx_stop(),
which does not ensure that the delayed work item tunnel->dprx_work has
fully completed if it was already running. This leads to use-after-free
scenarios where tb_tunnel is deallocated by tb_tunnel_put(), while
tunnel->dprx_work remains active and attempts to dereference tb_tunnel
in tb_dp_dprx_work().
A typical race condition is illustrated below:
CPU 0 | CPU 1
tb_dp_tunnel_active() |
tb_deactivate_and_free_tunnel()| tb_dp_dprx_start()
tb_tunnel_deactivate() | queue_delayed_work()
tb_dp_activate() |
tb_dp_dprx_stop() | tb_dp_dprx_work() //delayed worker
cancel_delayed_work() |
tb_tunnel_put(tunnel); |
| tunnel = container_of(...); //UAF
| tunnel-> //UAF
Replacing cancel_delayed_work() with cancel_delayed_work_sync() is
not feasible as it would introduce a deadlock: both tb_dp_dprx_work()
and the cleanup path acquire tb->lock, and cancel_delayed_work_sync()
would wait indefinitely for the work item that cannot proceed.
Instead, implement proper reference counting:
- If cancel_delayed_work() returns true (work is pending), we release
the reference in the stop function.
- If it returns false (work is executing or already completed), the
reference is released in delayed work function itself.
This ensures the tb_tunnel remains valid during work item execution
while preventing memory leaks.
This bug was found by static analysis. |
| A weakness has been identified in Tomofun Furbo 360 and Furbo Mini. Affected by this issue is some unknown functionality of the component UART Interface. Executing manipulation can lead to insecure storage of sensitive information. The physical device can be targeted for the attack. This attack is characterized by high complexity. The exploitation is known to be difficult. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Kognetiks Chatbot plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on several functions in all versions up to, and including, 2.3.5. This makes it possible for unauthenticated attackers to upload limited safe files and erase conversations. |
| The PowerBI Embed Reports plugin for WordPress is vulnerable to Sensitive Information Disclosure in all versions up to, and including, 1.2.0. This is due to missing capability checks and authentication verification on the 'testUser' endpoint accessible via the mo_epbr_admin_observer() function hooked on 'init'. This makes it possible for unauthenticated attackers to access sensitive Azure AD user information including personal identifiable information (PII) such as displayName, mail, phones, department, or detailed OAuth error data including Azure AD Application/Client IDs, error codes, trace IDs, and correlation IDs. |
| The Redirection for Contact Form 7 plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's qs_date shortcode in all versions up to, and including, 3.2.6 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The WPC Smart Quick View for WooCommerce plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 4.2.5 via the 'woosq_quickview' AJAX endpoint due to insufficient restrictions on which posts can be included. This makes it possible for unauthenticated attackers to extract data from password protected, private, or draft products that they should not have access to. |
| The WP Go Maps (formerly WP Google Maps) plugin for WordPress is vulnerable to Cache Poisoning in all versions up to, and including, 9.0.48. This is due to the plugin not serving cached data from server-side responses and instead relying on user-input. This makes it possible for unauthenticated attackers to poison the cache location for location search results. |
