| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the EtherChannel port subscription logic of Cisco Nexus 9500 Series Switches could allow an unauthenticated, remote attacker to bypass access control list (ACL) rules that are configured on an affected device. This vulnerability is due to oversubscription of resources that occurs when applying ACLs to port channel interfaces. An attacker could exploit this vulnerability by attempting to access network resources that are protected by the ACL. A successful exploit could allow the attacker to access network resources that would be protected by the ACL that was applied on the port channel interface. |
| A vulnerability in the IPv6 traffic processing of Cisco IOS XR Software and Cisco NX-OS Software for certain Cisco devices could allow an unauthenticated, remote attacker to bypass an IPv6 access control list (ACL) that is configured for an interface of an affected device. The vulnerability is due to improper processing of IPv6 traffic that is sent through an affected device. An attacker could exploit this vulnerability by sending crafted IPv6 packets that traverse the affected device. A successful exploit could allow the attacker to access resources that would typically be protected by the interface ACL. |
| A vulnerability in the network stack of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because the software improperly releases resources when it processes certain IPv6 packets that are destined to an affected device. An attacker could exploit this vulnerability by sending multiple crafted IPv6 packets to an affected device. A successful exploit could cause the network stack to run out of available buffers, impairing operations of control plane and management plane protocols and resulting in a DoS condition. Manual intervention would be required to restore normal operations on the affected device. For more information about the impact of this vulnerability, see the Details section of this advisory. |
| A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system. This vulnerability is due to insufficient CSRF protections for the NX-API on an affected device. An attacker could exploit this vulnerability by persuading a user of the NX-API to follow a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the affected user. The attacker could view and modify the device configuration. Note: The NX-API feature is disabled by default. |
| A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause the SNMP application to leak system memory, which could cause an affected device to restart unexpectedly. The vulnerability is due to improper error handling when processing inbound SNMP packets. An attacker could exploit this vulnerability by sending multiple crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the SNMP application to leak system memory because of an improperly handled error condition during packet processing. Over time, this memory leak could cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. |
| A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device. |
| A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device. |
| A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device. |
| A vulnerability in the SSH key management for the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, remote attacker to connect to the affected system with the privileges of the root user. The vulnerability is due to the presence of a default SSH key pair that is present in all devices. An attacker could exploit this vulnerability by opening an SSH connection via IPv6 to a targeted device using the extracted key materials. An exploit could allow the attacker to access the system with the privileges of the root user. This vulnerability is only exploitable over IPv6; IPv4 is not vulnerable. |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with valid administrator credentials to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with a privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. |
| A vulnerability in the Remote Package Manager (RPM) subsystem of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to leverage a time-of-check, time-of-use (TOCTOU) race condition to corrupt local variables, which could lead to arbitrary command injection. The vulnerability is due to the lack of a proper locking mechanism on critical variables that need to stay static until used. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a set of RPM-related CLI commands. A successful exploit could allow the attacker to perform arbitrary command injection. The attacker would need administrator credentials for the targeted device. |
| A vulnerability in the Secure Configuration Validation functionality of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to run arbitrary commands at system boot time with the privileges of root. The vulnerability is due to a lack of proper validation of system files when the persistent configuration information is read from the file system. An attacker could exploit this vulnerability by authenticating to the device and overwriting the persistent configuration storage with malicious executable files. An exploit could allow the attacker to run arbitrary commands at system startup and those commands will run as the root user. The attacker must have valid administrative credentials for the device. |
| A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a buffer overflow, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow, resulting in process crashes and a DoS condition on the device. MDS 9000 Series Multilayer Switches are affected running software versions prior to 6.2(25), 8.1(1b), 8.3(1). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected running software versions prior to 7.0(3)F3(5) Nexus 7000 and 7700 Series Switches are affected running software versions prior to 6.2(22) and 8.2(3). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected running software versions prior to 7.0(3)F3(5). UCS 6200, 6300, and 6400 Fabric Interconnects are affected running software versions prior to 3.2(3j) and 4.0(2a). |
| A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary code as root. The vulnerability is due to incorrect input validation in the NX-API feature. An attacker could exploit this vulnerability by sending a crafted HTTP or HTTPS request to an internal service on an affected device that has the NX-API feature enabled. A successful exploit could allow the attacker to cause a buffer overflow and execute arbitrary code as root. Note: The NX-API feature is disabled by default. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.1(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(8) and 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(8). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.3(2)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 7.3(3)D1(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I4(8) and 7.0(3)I7(1). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). |
| A vulnerability in the user account management interface of Cisco NX-OS Software could allow an authenticated, local attacker to gain elevated privileges on an affected device. The vulnerability is due to an incorrect authorization check of user accounts and their associated Group ID (GID). An attacker could exploit this vulnerability by taking advantage of a logic error that will permit the use of higher privileged commands than what is necessarily assigned. A successful exploit could allow an attacker to execute commands with elevated privileges on the underlying Linux shell of an affected device. Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 8.2(3), and 8.3(2). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). |
