| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
block: mark GFP_NOIO around sysfs ->store()
sysfs ->store is called with queue freezed, meantime we have several
->store() callbacks(update_nr_requests, wbt, scheduler) to allocate
memory with GFP_KERNEL which may run into direct reclaim code path,
then potential deadlock can be caused.
Fix the issue by marking NOIO around sysfs ->store() |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/amd/display: Use HW lock mgr for PSR1"
This reverts commit
a2b5a9956269 ("drm/amd/display: Use HW lock mgr for PSR1")
Because it may cause system hang while connect with two edp panel. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: omap: use threaded IRQ for LCD DMA
When using touchscreen and framebuffer, Nokia 770 crashes easily with:
BUG: scheduling while atomic: irq/144-ads7846/82/0x00010000
Modules linked in: usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap_udc ohci_omap ohci_hcd
CPU: 0 UID: 0 PID: 82 Comm: irq/144-ads7846 Not tainted 6.12.7-770 #2
Hardware name: Nokia 770
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x54/0x5c
dump_stack_lvl from __schedule_bug+0x50/0x70
__schedule_bug from __schedule+0x4d4/0x5bc
__schedule from schedule+0x34/0xa0
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from __mutex_lock.constprop.0+0x218/0x3b4
__mutex_lock.constprop.0 from clk_prepare_lock+0x38/0xe4
clk_prepare_lock from clk_set_rate+0x18/0x154
clk_set_rate from sossi_read_data+0x4c/0x168
sossi_read_data from hwa742_read_reg+0x5c/0x8c
hwa742_read_reg from send_frame_handler+0xfc/0x300
send_frame_handler from process_pending_requests+0x74/0xd0
process_pending_requests from lcd_dma_irq_handler+0x50/0x74
lcd_dma_irq_handler from __handle_irq_event_percpu+0x44/0x130
__handle_irq_event_percpu from handle_irq_event+0x28/0x68
handle_irq_event from handle_level_irq+0x9c/0x170
handle_level_irq from generic_handle_domain_irq+0x2c/0x3c
generic_handle_domain_irq from omap1_handle_irq+0x40/0x8c
omap1_handle_irq from generic_handle_arch_irq+0x28/0x3c
generic_handle_arch_irq from call_with_stack+0x1c/0x24
call_with_stack from __irq_svc+0x94/0xa8
Exception stack(0xc5255da0 to 0xc5255de8)
5da0: 00000001 c22fc620 00000000 00000000 c08384a8 c106fc00 00000000 c240c248
5dc0: c113a600 c3f6ec30 00000001 00000000 c22fc620 c5255df0 c22fc620 c0279a94
5de0: 60000013 ffffffff
__irq_svc from clk_prepare_lock+0x4c/0xe4
clk_prepare_lock from clk_get_rate+0x10/0x74
clk_get_rate from uwire_setup_transfer+0x40/0x180
uwire_setup_transfer from spi_bitbang_transfer_one+0x2c/0x9c
spi_bitbang_transfer_one from spi_transfer_one_message+0x2d0/0x664
spi_transfer_one_message from __spi_pump_transfer_message+0x29c/0x498
__spi_pump_transfer_message from __spi_sync+0x1f8/0x2e8
__spi_sync from spi_sync+0x24/0x40
spi_sync from ads7846_halfd_read_state+0x5c/0x1c0
ads7846_halfd_read_state from ads7846_irq+0x58/0x348
ads7846_irq from irq_thread_fn+0x1c/0x78
irq_thread_fn from irq_thread+0x120/0x228
irq_thread from kthread+0xc8/0xe8
kthread from ret_from_fork+0x14/0x28
As a quick fix, switch to a threaded IRQ which provides a stable system. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: vmclock: Set driver data before its usage
If vmclock_ptp_register() fails during probing, vmclock_remove() is
called to clean up the ptp clock and misc device.
It uses dev_get_drvdata() to access the vmclock state.
However the driver data is not yet set at this point.
Assign the driver data earlier. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: Drop unmanaged ELP metric worker
The ELP worker needs to calculate new metric values for all neighbors
"reachable" over an interface. Some of the used metric sources require
locks which might need to sleep. This sleep is incompatible with the RCU
list iterator used for the recorded neighbors. The initial approach to work
around of this problem was to queue another work item per neighbor and then
run this in a new context.
Even when this solved the RCU vs might_sleep() conflict, it has a major
problems: Nothing was stopping the work item in case it is not needed
anymore - for example because one of the related interfaces was removed or
the batman-adv module was unloaded - resulting in potential invalid memory
accesses.
Directly canceling the metric worker also has various problems:
* cancel_work_sync for a to-be-deactivated interface is called with
rtnl_lock held. But the code in the ELP metric worker also tries to use
rtnl_lock() - which will never return in this case. This also means that
cancel_work_sync would never return because it is waiting for the worker
to finish.
* iterating over the neighbor list for the to-be-deactivated interface is
currently done using the RCU specific methods. Which means that it is
possible to miss items when iterating over it without the associated
spinlock - a behaviour which is acceptable for a periodic metric check
but not for a cleanup routine (which must "stop" all still running
workers)
The better approch is to get rid of the per interface neighbor metric
worker and handle everything in the interface worker. The original problems
are solved by:
* creating a list of neighbors which require new metric information inside
the RCU protected context, gathering the metric according to the new list
outside the RCU protected context
* only use rcu_trylock inside metric gathering code to avoid a deadlock
when the cancel_delayed_work_sync is called in the interface removal code
(which is called with the rtnl_lock held) |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: ipmb: Add check devm_kasprintf() returned value
devm_kasprintf() can return a NULL pointer on failure but this
returned value is not checked. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: core: Fix ida_free call while not allocated
In the rproc_alloc() function, on error, put_device(&rproc->dev) is
called, leading to the call of the rproc_type_release() function.
An error can occurs before ida_alloc is called.
In such case in rproc_type_release(), the condition (rproc->index >= 0) is
true as rproc->index has been initialized to 0.
ida_free() is called reporting a warning:
[ 4.181906] WARNING: CPU: 1 PID: 24 at lib/idr.c:525 ida_free+0x100/0x164
[ 4.186378] stm32-display-dsi 5a000000.dsi: Fixed dependency cycle(s) with /soc/dsi@5a000000/panel@0
[ 4.188854] ida_free called for id=0 which is not allocated.
[ 4.198256] mipi-dsi 5a000000.dsi.0: Fixed dependency cycle(s) with /soc/dsi@5a000000
[ 4.203556] Modules linked in: panel_orisetech_otm8009a dw_mipi_dsi_stm(+) gpu_sched dw_mipi_dsi stm32_rproc stm32_crc32 stm32_ipcc(+) optee(+)
[ 4.224307] CPU: 1 UID: 0 PID: 24 Comm: kworker/u10:0 Not tainted 6.12.0 #442
[ 4.231481] Hardware name: STM32 (Device Tree Support)
[ 4.236627] Workqueue: events_unbound deferred_probe_work_func
[ 4.242504] Call trace:
[ 4.242522] unwind_backtrace from show_stack+0x10/0x14
[ 4.250218] show_stack from dump_stack_lvl+0x50/0x64
[ 4.255274] dump_stack_lvl from __warn+0x80/0x12c
[ 4.260134] __warn from warn_slowpath_fmt+0x114/0x188
[ 4.265199] warn_slowpath_fmt from ida_free+0x100/0x164
[ 4.270565] ida_free from rproc_type_release+0x38/0x60
[ 4.275832] rproc_type_release from device_release+0x30/0xa0
[ 4.281601] device_release from kobject_put+0xc4/0x294
[ 4.286762] kobject_put from rproc_alloc.part.0+0x208/0x28c
[ 4.292430] rproc_alloc.part.0 from devm_rproc_alloc+0x80/0xc4
[ 4.298393] devm_rproc_alloc from stm32_rproc_probe+0xd0/0x844 [stm32_rproc]
[ 4.305575] stm32_rproc_probe [stm32_rproc] from platform_probe+0x5c/0xbc
Calling ida_alloc earlier in rproc_alloc ensures that the rproc->index is
properly set. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix handling of received connection abort
Fix the handling of a connection abort that we've received. Though the
abort is at the connection level, it needs propagating to the calls on that
connection. Whilst the propagation bit is performed, the calls aren't then
woken up to go and process their termination, and as no further input is
forthcoming, they just hang.
Also add some tracing for the logging of connection aborts. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: convert workqueues to unbound
When a workqueue is created with `WQ_UNBOUND`, its work items are
served by special worker-pools, whose host workers are not bound to
any specific CPU. In the default configuration (i.e. when
`queue_delayed_work` and friends do not specify which CPU to run the
work item on), `WQ_UNBOUND` allows the work item to be executed on any
CPU in the same node of the CPU it was enqueued on. While this
solution potentially sacrifices locality, it avoids contention with
other processes that might dominate the CPU time of the processor the
work item was scheduled on.
This is not just a theoretical problem: in a particular scenario
misconfigured process was hogging most of the time from CPU0, leaving
less than 0.5% of its CPU time to the kworker. The IDPF workqueues
that were using the kworker on CPU0 suffered large completion delays
as a result, causing performance degradation, timeouts and eventual
system crash.
* I have also run a manual test to gauge the performance
improvement. The test consists of an antagonist process
(`./stress --cpu 2`) consuming as much of CPU 0 as possible. This
process is run under `taskset 01` to bind it to CPU0, and its
priority is changed with `chrt -pQ 9900 10000 ${pid}` and
`renice -n -20 ${pid}` after start.
Then, the IDPF driver is forced to prefer CPU0 by editing all calls
to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0.
Finally, `ktraces` for the workqueue events are collected.
Without the current patch, the antagonist process can force
arbitrary delays between `workqueue_queue_work` and
`workqueue_execute_start`, that in my tests were as high as
`30ms`. With the current patch applied, the workqueue can be
migrated to another unloaded CPU in the same node, and, keeping
everything else equal, the maximum delay I could see was `6us`. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: prohibit deactivating all links
In the internal API this calls this is a WARN_ON, but that
should remain since internally we want to know about bugs
that may cause this. Prevent deactivating all links in the
debugfs write directly. |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formAdvFirewall. |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetRoute. |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formLogDnsquery. |
| D-Link DIR600LAx FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetQoS. |
| Cross Site Scripting (XSS) vulnerability in Gnuboard 5.6.15 allows authenticated attackers to execute arbitrary code via crafted c_id parameter in bbs/view_comment.php. |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formAdvNetwork. |
| Emoncms 11.7.3 is vulnerable to Cross Site in the input handling mechanism. This vulnerability allows authenticated attackers with API access to inject malicious JavaScript code that executes when administrators view the application logs. |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetWAN_Wizard7. |
| Emoncms 11.7.3 has a remote code execution vulnerability in the firmware upload feature that allows authenticated users to execute arbitrary commands on the target system. The vulnerability stems from insufficient input validation of user-controlled parameters including filename, port, baud_rate, core, and autoreset within the /admin/upload-custom-firmware endpoint. |
| D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formLanSetupRouterSettings. |
