Filtered by vendor Cisco
Subscriptions
Filtered by product Ucs 6248up
Subscriptions
Total
35 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2020-3517 | 1 Cisco | 98 Firepower 4110, Firepower 4112, Firepower 4115 and 95 more | 2024-09-16 | 8.6 High |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated attacker to cause process crashes, which could result in a denial of service (DoS) condition on an affected device. The attack vector is configuration dependent and could be remote or adjacent. For more information about the attack vector, see the Details section of this advisory. The vulnerability is due to insufficient error handling when the affected software parses Cisco Fabric Services messages. An attacker could exploit this vulnerability by sending malicious Cisco Fabric Services messages to an affected device. A successful exploit could allow the attacker to cause a reload of an affected device, which could result in a DoS condition. | ||||
| CVE-2019-1962 | 1 Cisco | 87 7000 10-slot, 7000 18-slot, 7000 4-slot and 84 more | 2024-09-16 | N/A |
| A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause process crashes, which can result in a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient validation of TCP packets when processed by the Cisco Fabric Services over IP (CFSoIP) feature. An attacker could exploit this vulnerability by sending a malicious Cisco Fabric Services TCP packet to an affected device. A successful exploit could allow the attacker to cause process crashes, resulting in a device reload and a DoS condition. Note: There are three distribution methods that can be configured for Cisco Fabric Services. This vulnerability affects only distribution method CFSoIP, which is disabled by default. See the Details section for more information. | ||||
| CVE-2020-3504 | 1 Cisco | 108 Firepower 1010, Firepower 1120, Firepower 1140 and 105 more | 2024-09-16 | 3.3 Low |
| A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of CLI command parameters. An attacker could exploit this vulnerability by executing specific commands on the local-mgmt CLI on an affected device. A successful exploit could allow the attacker to cause internal system processes to fail to terminate properly, which could result in a buildup of stuck processes and lead to slowness in accessing the UCS Manager CLI and web UI. A sustained attack may result in a restart of internal UCS Manager processes and a temporary loss of access to the UCS Manager CLI and web UI. | ||||
| CVE-2019-1726 | 1 Cisco | 29 Mds 9000, Mds 9100, Mds 9200 and 26 more | 2024-09-16 | 7.8 High |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to access internal services that should be restricted on an affected device, such as the NX-API. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument to the affected command. A successful exploit could allow the attacker to bypass intended restrictions and access internal services of the device. An attacker would need valid device credentials to exploit this vulnerability. | ||||
| CVE-2019-1795 | 1 Cisco | 144 7000 10-slot, 7000 18-slot, 7000 4-slot and 141 more | 2024-09-16 | 6.7 Medium |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. | ||||
| CVE-2018-0303 | 1 Cisco | 84 Firepower 4110, Firepower 4120, Firepower 4140 and 81 more | 2024-08-05 | N/A |
| A vulnerability in the Cisco Discovery Protocol component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on the affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2 adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. This vulnerability affects the following if configured to use Cisco Discovery Protocol: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc22202, CSCvc22205, CSCvc22208, CSCvc88078, CSCvc88150, CSCvc88159, CSCvc88162, CSCvc88167. | ||||
| CVE-2018-0302 | 1 Cisco | 13 Firepower 4110, Firepower 4120, Firepower 4140 and 10 more | 2024-08-05 | 7.8 High |
| A vulnerability in the CLI parser of Cisco FXOS Software and Cisco UCS Fabric Interconnect Software could allow an authenticated, local attacker to cause a buffer overflow on an affected device. The vulnerability is due to incorrect input validation in the CLI parser subsystem. An attacker could exploit this vulnerability by exceeding the expected length of user input. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61099, CSCvb86743. | ||||
| CVE-2018-0310 | 1 Cisco | 84 Firepower 4110, Firepower 4120, Firepower 4140 and 81 more | 2024-08-05 | N/A |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to obtain sensitive information from memory or cause a denial of service (DoS) condition on the affected product. The vulnerability exists because the affected software insufficiently validates header values in Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overread condition, which could allow the attacker to obtain sensitive information from memory or cause a DoS condition on the affected product. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69957, CSCve02435, CSCve04859, CSCve41536, CSCve41538, CSCve41559. | ||||
| CVE-2018-0294 | 1 Cisco | 75 Firepower 4110, Firepower 4120, Firepower 4140 and 72 more | 2024-08-05 | N/A |
| A vulnerability in the write-erase feature of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to configure an unauthorized administrator account for an affected device. The vulnerability exists because the affected software does not properly delete sensitive files when certain CLI commands are used to clear the device configuration and reload a device. An attacker could exploit this vulnerability by logging into an affected device as an administrative user and configuring an unauthorized account for the device. The account would not require a password for authentication and would be accessible only via a Secure Shell (SSH) connection to the device. A successful exploit could allow the attacker to configure an unauthorized account that has administrative privileges, does not require a password for authentication, and does not appear in the running configuration or the audit logs for the affected device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3500 Platform Switches, Nexus 4000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd13993, CSCvd34845, CSCvd34857, CSCvd34862, CSCvd34879, CSCve35753. | ||||
| CVE-2018-0311 | 1 Cisco | 84 Firepower 4110, Firepower 4120, Firepower 4140 and 81 more | 2024-08-05 | N/A |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packets when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could cause process crashes and result in a DoS condition on the device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69960, CSCve02463, CSCve04859, CSCve41530, CSCve41537, CSCve41541, CSCve41557. | ||||
| CVE-2018-0298 | 1 Cisco | 13 Firepower 4110, Firepower 4120, Firepower 4140 and 10 more | 2024-08-05 | N/A |
| A vulnerability in the web UI of Cisco FXOS and Cisco UCS Fabric Interconnect Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected system. The vulnerability is due to incorrect input validation in the web UI. An attacker could exploit this vulnerability by sending a malicious HTTP or HTTPS packet directed to the physical management interface of an affected system. A successful exploit could allow the attacker to cause the process to crash and possibly reload the device, resulting in a denial of service (DoS) condition on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61398, CSCvb86799. | ||||
| CVE-2018-0331 | 1 Cisco | 78 Firepower 4110, Firepower 4120, Firepower 4140 and 75 more | 2024-08-05 | 6.5 Medium |
| A vulnerability in the Cisco Discovery Protocol (formerly known as CDP) subsystem of devices running, or based on, Cisco NX-OS Software contain a vulnerability that could allow an unauthenticated, adjacent attacker to create a denial of service (DoS) condition. The vulnerability is due to a failure to properly validate certain fields within a Cisco Discovery Protocol message prior to processing it. An attacker with the ability to submit a Cisco Discovery Protocol message designed to trigger the issue could cause a DoS condition on an affected device while the device restarts. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc89242, CSCve40943, CSCve40953, CSCve40965, CSCve40970, CSCve40978, CSCve40992, CSCve41000, CSCve41007. | ||||
| CVE-2018-0291 | 1 Cisco | 71 Nexus 172tq-xl, Nexus 3016, Nexus 3048 and 68 more | 2024-08-05 | N/A |
| A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuw99630, CSCvg71290, CSCvj67977. | ||||
| CVE-2023-20016 | 1 Cisco | 39 Firepower 4100, Firepower 4110, Firepower 4112 and 36 more | 2024-08-02 | 6.3 Medium |
| A vulnerability in the backup configuration feature of Cisco UCS Manager Software and in the configuration export feature of Cisco FXOS Software could allow an unauthenticated attacker with access to a backup file to decrypt sensitive information stored in the full state and configuration backup files. This vulnerability is due to a weakness in the encryption method used for the backup function. An attacker could exploit this vulnerability by leveraging a static key used for the backup configuration feature. A successful exploit could allow the attacker to decrypt sensitive information that is stored in full state and configuration backup files, such as local user credentials, authentication server passwords, Simple Network Management Protocol (SNMP) community names, and other credentials. | ||||
| CVE-2023-20015 | 1 Cisco | 39 Firepower 4100, Firepower 4110, Firepower 4112 and 36 more | 2024-08-02 | 6 Medium |
| A vulnerability in the CLI of Cisco Firepower 4100 Series, Cisco Firepower 9300 Security Appliances, and Cisco UCS 6200, 6300, 6400, and 6500 Series Fabric Interconnects could allow an authenticated, local attacker to inject unauthorized commands. This vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute unauthorized commands within the CLI. An attacker with Administrator privileges could also execute arbitrary commands on the underlying operating system of Cisco UCS 6400 and 6500 Series Fabric Interconnects with root-level privileges. | ||||