| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Standards Processing Engine 10.0.1.10 could allow a remote attacker to execute arbitrary code on the system, caused by an unsafe java deserialization. By sending specially crafted input, an attacker could exploit this vulnerability to execute arbitrary code on the system. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix a null-ptr-deref in tipc_topsrv_accept
syzbot found a crash in tipc_topsrv_accept:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
Workqueue: tipc_rcv tipc_topsrv_accept
RIP: 0010:kernel_accept+0x22d/0x350 net/socket.c:3487
Call Trace:
<TASK>
tipc_topsrv_accept+0x197/0x280 net/tipc/topsrv.c:460
process_one_work+0x991/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
It was caused by srv->listener that might be set to null by
tipc_topsrv_stop() in net .exit whereas it's still used in
tipc_topsrv_accept() worker.
srv->listener is protected by srv->idr_lock in tipc_topsrv_stop(), so add
a check for srv->listener under srv->idr_lock in tipc_topsrv_accept() to
avoid the null-ptr-deref. To ensure the lsock is not released during the
tipc_topsrv_accept(), move sock_release() after tipc_topsrv_work_stop()
where it's waiting until the tipc_topsrv_accept worker to be done.
Note that sk_callback_lock is used to protect sk->sk_user_data instead of
srv->listener, and it should check srv in tipc_topsrv_listener_data_ready()
instead. This also ensures that no more tipc_topsrv_accept worker will be
started after tipc_conn_close() is called in tipc_topsrv_stop() where it
sets sk->sk_user_data to null. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: use quiesced elevator switch when reinitializing queues
The hctx's run_work may be racing with the elevator switch when
reinitializing hardware queues. The queue is merely frozen in this
context, but that only prevents requests from allocating and doesn't
stop the hctx work from running. The work may get an elevator pointer
that's being torn down, and can result in use-after-free errors and
kernel panics (example below). Use the quiesced elevator switch instead,
and make the previous one static since it is now only used locally.
nvme nvme0: resetting controller
nvme nvme0: 32/0/0 default/read/poll queues
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 80000020c8861067 P4D 80000020c8861067 PUD 250f8c8067 PMD 0
Oops: 0000 [#1] SMP PTI
Workqueue: kblockd blk_mq_run_work_fn
RIP: 0010:kyber_has_work+0x29/0x70
...
Call Trace:
__blk_mq_do_dispatch_sched+0x83/0x2b0
__blk_mq_sched_dispatch_requests+0x12e/0x170
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x2b/0x50
process_one_work+0x1ef/0x380
worker_thread+0x2d/0x3e0 |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iolatency: Fix memory leak on add_disk() failures
When a gendisk is successfully initialized but add_disk() fails such as when
a loop device has invalid number of minor device numbers specified,
blkcg_init_disk() is called during init and then blkcg_exit_disk() during
error handling. Unfortunately, iolatency gets initialized in the former but
doesn't get cleaned up in the latter.
This is because, in non-error cases, the cleanup is performed by
del_gendisk() calling rq_qos_exit(), the assumption being that rq_qos
policies, iolatency being one of them, can only be activated once the disk
is fully registered and visible. That assumption is true for wbt and iocost,
but not so for iolatency as it gets initialized before add_disk() is called.
It is desirable to lazy-init rq_qos policies because they are optional
features and add to hot path overhead once initialized - each IO has to walk
all the registered rq_qos policies. So, we want to switch iolatency to lazy
init too. However, that's a bigger change. As a fix for the immediate
problem, let's just add an extra call to rq_qos_exit() in blkcg_exit_disk().
This is safe because duplicate calls to rq_qos_exit() become noop's. |
| In the Linux kernel, the following vulnerability has been resolved:
media: solo6x10: fix possible memory leak in solo_sysfs_init()
If device_register() returns error in solo_sysfs_init(), the
name allocated by dev_set_name() need be freed. As comment of
device_register() says, it should use put_device() to give up
the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix uninititialized value in 'ext4_evict_inode'
Syzbot found the following issue:
=====================================================
BUG: KMSAN: uninit-value in ext4_evict_inode+0xdd/0x26b0 fs/ext4/inode.c:180
ext4_evict_inode+0xdd/0x26b0 fs/ext4/inode.c:180
evict+0x365/0x9a0 fs/inode.c:664
iput_final fs/inode.c:1747 [inline]
iput+0x985/0xdd0 fs/inode.c:1773
__ext4_new_inode+0xe54/0x7ec0 fs/ext4/ialloc.c:1361
ext4_mknod+0x376/0x840 fs/ext4/namei.c:2844
vfs_mknod+0x79d/0x830 fs/namei.c:3914
do_mknodat+0x47d/0xaa0
__do_sys_mknodat fs/namei.c:3992 [inline]
__se_sys_mknodat fs/namei.c:3989 [inline]
__ia32_sys_mknodat+0xeb/0x150 fs/namei.c:3989
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203
do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:246
entry_SYSENTER_compat_after_hwframe+0x70/0x82
Uninit was created at:
__alloc_pages+0x9f1/0xe80 mm/page_alloc.c:5578
alloc_pages+0xaae/0xd80 mm/mempolicy.c:2285
alloc_slab_page mm/slub.c:1794 [inline]
allocate_slab+0x1b5/0x1010 mm/slub.c:1939
new_slab mm/slub.c:1992 [inline]
___slab_alloc+0x10c3/0x2d60 mm/slub.c:3180
__slab_alloc mm/slub.c:3279 [inline]
slab_alloc_node mm/slub.c:3364 [inline]
slab_alloc mm/slub.c:3406 [inline]
__kmem_cache_alloc_lru mm/slub.c:3413 [inline]
kmem_cache_alloc_lru+0x6f3/0xb30 mm/slub.c:3429
alloc_inode_sb include/linux/fs.h:3117 [inline]
ext4_alloc_inode+0x5f/0x860 fs/ext4/super.c:1321
alloc_inode+0x83/0x440 fs/inode.c:259
new_inode_pseudo fs/inode.c:1018 [inline]
new_inode+0x3b/0x430 fs/inode.c:1046
__ext4_new_inode+0x2a7/0x7ec0 fs/ext4/ialloc.c:959
ext4_mkdir+0x4d5/0x1560 fs/ext4/namei.c:2992
vfs_mkdir+0x62a/0x870 fs/namei.c:4035
do_mkdirat+0x466/0x7b0 fs/namei.c:4060
__do_sys_mkdirat fs/namei.c:4075 [inline]
__se_sys_mkdirat fs/namei.c:4073 [inline]
__ia32_sys_mkdirat+0xc4/0x120 fs/namei.c:4073
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203
do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:246
entry_SYSENTER_compat_after_hwframe+0x70/0x82
CPU: 1 PID: 4625 Comm: syz-executor.2 Not tainted 6.1.0-rc4-syzkaller-62821-gcb231e2f67ec #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
=====================================================
Now, 'ext4_alloc_inode()' didn't init 'ei->i_flags'. If new inode failed
before set 'ei->i_flags' in '__ext4_new_inode()', then do 'iput()'. As after
6bc0d63dad7f commit will access 'ei->i_flags' in 'ext4_evict_inode()' which
will lead to access uninit-value.
To solve above issue just init 'ei->i_flags' in 'ext4_alloc_inode()'. |
| In the Linux kernel, the following vulnerability has been resolved:
r6040: Fix kmemleak in probe and remove
There is a memory leaks reported by kmemleak:
unreferenced object 0xffff888116111000 (size 2048):
comm "modprobe", pid 817, jiffies 4294759745 (age 76.502s)
hex dump (first 32 bytes):
00 c4 0a 04 81 88 ff ff 08 10 11 16 81 88 ff ff ................
08 10 11 16 81 88 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
[<ffffffff827e20ee>] phy_device_create+0x4e/0x90
[<ffffffff827e6072>] get_phy_device+0xd2/0x220
[<ffffffff827e7844>] mdiobus_scan+0xa4/0x2e0
[<ffffffff827e8be2>] __mdiobus_register+0x482/0x8b0
[<ffffffffa01f5d24>] r6040_init_one+0x714/0xd2c [r6040]
...
The problem occurs in probe process as follows:
r6040_init_one:
mdiobus_register
mdiobus_scan <- alloc and register phy_device,
the reference count of phy_device is 3
r6040_mii_probe
phy_connect <- connect to the first phy_device,
so the reference count of the first
phy_device is 4, others are 3
register_netdev <- fault inject succeeded, goto error handling path
// error handling path
err_out_mdio_unregister:
mdiobus_unregister(lp->mii_bus);
err_out_mdio:
mdiobus_free(lp->mii_bus); <- the reference count of the first
phy_device is 1, it is not released
and other phy_devices are released
// similarly, the remove process also has the same problem
The root cause is traced to the phy_device is not disconnected when
removes one r6040 device in r6040_remove_one() or on error handling path
after r6040_mii probed successfully. In r6040_mii_probe(), a net ethernet
device is connected to the first PHY device of mii_bus, in order to
notify the connected driver when the link status changes, which is the
default behavior of the PHY infrastructure to handle everything.
Therefore the phy_device should be disconnected when removes one r6040
device or on error handling path.
Fix it by adding phy_disconnect() when removes one r6040 device or on
error handling path after r6040_mii probed successfully. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()
xhci_alloc_stream_info() allocates stream context array for stream_info
->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs,
stream_info->stream_ctx_array is not released, which will lead to a
memory leak.
We can fix it by releasing the stream_info->stream_ctx_array with
xhci_free_stream_ctx() on the error path to avoid the potential memory
leak. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix mr->map double free
rxe_mr_cleanup() which tries to free mr->map again will be called when
rxe_mr_init_user() fails:
CPU: 0 PID: 4917 Comm: rdma_flush_serv Kdump: loaded Not tainted 6.1.0-rc1-roce-flush+ #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x5d
panic+0x19e/0x349
end_report.part.0+0x54/0x7c
kasan_report.cold+0xa/0xf
rxe_mr_cleanup+0x9d/0xf0 [rdma_rxe]
__rxe_cleanup+0x10a/0x1e0 [rdma_rxe]
rxe_reg_user_mr+0xb7/0xd0 [rdma_rxe]
ib_uverbs_reg_mr+0x26a/0x480 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x1a2/0x250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1397/0x15a0 [ib_uverbs]
This issue was firstly exposed since commit b18c7da63fcb ("RDMA/rxe: Fix
memory leak in error path code") and then we fixed it in commit
8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") but this
fix was reverted together at last by commit 1e75550648da (Revert
"RDMA/rxe: Create duplicate mapping tables for FMRs")
Simply let rxe_mr_cleanup() always handle freeing the mr->map once it is
successfully allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
media: si470x: Fix use-after-free in si470x_int_in_callback()
syzbot reported use-after-free in si470x_int_in_callback() [1]. This
indicates that urb->context, which contains struct si470x_device
object, is freed when si470x_int_in_callback() is called.
The cause of this issue is that si470x_int_in_callback() is called for
freed urb.
si470x_usb_driver_probe() calls si470x_start_usb(), which then calls
usb_submit_urb() and si470x_start(). If si470x_start_usb() fails,
si470x_usb_driver_probe() doesn't kill urb, but it just frees struct
si470x_device object, as depicted below:
si470x_usb_driver_probe()
...
si470x_start_usb()
...
usb_submit_urb()
retval = si470x_start()
return retval
if (retval < 0)
free struct si470x_device object, but don't kill urb
This patch fixes this issue by killing urb when si470x_start_usb()
fails and urb is submitted. If si470x_start_usb() fails and urb is
not submitted, i.e. submitting usb fails, it just frees struct
si470x_device object. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: k3-udma: Reset UDMA_CHAN_RT byte counters to prevent overflow
UDMA_CHAN_RT_*BCNT_REG stores the real-time channel bytecount statistics.
These registers are 32-bit hardware counters and the driver uses these
counters to monitor the operational progress status for a channel, when
transferring more than 4GB of data it was observed that these counters
overflow and completion calculation of a operation gets affected and the
transfer hangs indefinitely.
This commit adds changes to decrease the byte count for every complete
transaction so that these registers never overflow and the proper byte
count statistics is maintained for ongoing transaction by the RT counters.
Earlier uc->bcnt used to maintain a count of the completed bytes at driver
side, since the RT counters maintain the statistics of current transaction
now, the maintenance of uc->bcnt is not necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: qcom-adm: fix wrong sizeof config in slave_config
Fix broken slave_config function that uncorrectly compare the
peripheral_size with the size of the config pointer instead of the size
of the config struct. This cause the crci value to be ignored and cause
a kernel panic on any slave that use adm driver.
To fix this, compare to the size of the struct and NOT the size of the
pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: OMAP2+: omap4-common: Fix refcount leak bug
In omap4_sram_init(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
vme: Fix error not catched in fake_init()
In fake_init(), __root_device_register() is possible to fail but it's
ignored, which can cause unregistering vme_root fail when exit.
general protection fault,
probably for non-canonical address 0xdffffc000000008c
KASAN: null-ptr-deref in range [0x0000000000000460-0x0000000000000467]
RIP: 0010:root_device_unregister+0x26/0x60
Call Trace:
<TASK>
__x64_sys_delete_module+0x34f/0x540
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Return error when __root_device_register() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe()
In rpi_firmware_probe(), if mbox_request_channel() fails, the 'fw' will
not be freed through rpi_firmware_delete(), fix this leak by calling
kfree() in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data
In tcp_bpf_send_verdict() redirection, the eval variable is assigned to
__SK_REDIRECT after the apply_bytes data is sent, if msg has more_data,
sock_put() will be called multiple times.
We should reset the eval variable to __SK_NONE every time more_data
starts.
This causes:
IPv4: Attempt to release TCP socket in state 1 00000000b4c925d7
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 5 PID: 4482 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0x110
Modules linked in:
CPU: 5 PID: 4482 Comm: sockhash_bypass Kdump: loaded Not tainted 6.0.0 #1
Hardware name: Red Hat KVM, BIOS 1.11.0-2.el7 04/01/2014
Call Trace:
<TASK>
__tcp_transmit_skb+0xa1b/0xb90
? __alloc_skb+0x8c/0x1a0
? __kmalloc_node_track_caller+0x184/0x320
tcp_write_xmit+0x22a/0x1110
__tcp_push_pending_frames+0x32/0xf0
do_tcp_sendpages+0x62d/0x640
tcp_bpf_push+0xae/0x2c0
tcp_bpf_sendmsg_redir+0x260/0x410
? preempt_count_add+0x70/0xa0
tcp_bpf_send_verdict+0x386/0x4b0
tcp_bpf_sendmsg+0x21b/0x3b0
sock_sendmsg+0x58/0x70
__sys_sendto+0xfa/0x170
? xfd_validate_state+0x1d/0x80
? switch_fpu_return+0x59/0xe0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Grab sas_dev lock when traversing the members of sas_dev.list
When freeing slots in function slot_complete_v3_hw(), it is possible that
sas_dev.list is being traversed elsewhere, and it may trigger a NULL
pointer exception, such as follows:
==>cq thread ==>scsi_eh_6
==>scsi_error_handler()
==>sas_eh_handle_sas_errors()
==>sas_scsi_find_task()
==>lldd_abort_task()
==>slot_complete_v3_hw() ==>hisi_sas_abort_task()
==>hisi_sas_slot_task_free() ==>dereg_device_v3_hw()
==>list_del_init() ==>list_for_each_entry_safe()
[ 7165.434918] sas: Enter sas_scsi_recover_host busy: 32 failed: 32
[ 7165.434926] sas: trying to find task 0x00000000769b5ba5
[ 7165.434927] sas: sas_scsi_find_task: aborting task 0x00000000769b5ba5
[ 7165.434940] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000769b5ba5) aborted
[ 7165.434964] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000c9f7aa07) ignored
[ 7165.434965] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000e2a1cf01) ignored
[ 7165.434968] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 7165.434972] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(0000000022d52d93) ignored
[ 7165.434975] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(0000000066a7516c) ignored
[ 7165.434976] Mem abort info:
[ 7165.434982] ESR = 0x96000004
[ 7165.434991] Exception class = DABT (current EL), IL = 32 bits
[ 7165.434992] SET = 0, FnV = 0
[ 7165.434993] EA = 0, S1PTW = 0
[ 7165.434994] Data abort info:
[ 7165.434994] ISV = 0, ISS = 0x00000004
[ 7165.434995] CM = 0, WnR = 0
[ 7165.434997] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000f29543f2
[ 7165.434998] [0000000000000000] pgd=0000000000000000
[ 7165.435003] Internal error: Oops: 96000004 [#1] SMP
[ 7165.439863] Process scsi_eh_6 (pid: 4109, stack limit = 0x00000000c43818d5)
[ 7165.468862] pstate: 00c00009 (nzcv daif +PAN +UAO)
[ 7165.473637] pc : dereg_device_v3_hw+0x68/0xa8 [hisi_sas_v3_hw]
[ 7165.479443] lr : dereg_device_v3_hw+0x2c/0xa8 [hisi_sas_v3_hw]
[ 7165.485247] sp : ffff00001d623bc0
[ 7165.488546] x29: ffff00001d623bc0 x28: ffffa027d03b9508
[ 7165.493835] x27: ffff80278ed50af0 x26: ffffa027dd31e0a8
[ 7165.499123] x25: ffffa027d9b27f88 x24: ffffa027d9b209f8
[ 7165.504411] x23: ffffa027c45b0d60 x22: ffff80278ec07c00
[ 7165.509700] x21: 0000000000000008 x20: ffffa027d9b209f8
[ 7165.514988] x19: ffffa027d9b27f88 x18: ffffffffffffffff
[ 7165.520276] x17: 0000000000000000 x16: 0000000000000000
[ 7165.525564] x15: ffff0000091d9708 x14: ffff0000093b7dc8
[ 7165.530852] x13: ffff0000093b7a23 x12: 6e7265746e692067
[ 7165.536140] x11: 0000000000000000 x10: 0000000000000bb0
[ 7165.541429] x9 : ffff00001d6238f0 x8 : ffffa027d877af00
[ 7165.546718] x7 : ffffa027d6329600 x6 : ffff7e809f58ca00
[ 7165.552006] x5 : 0000000000001f8a x4 : 000000000000088e
[ 7165.557295] x3 : ffffa027d9b27fa8 x2 : 0000000000000000
[ 7165.562583] x1 : 0000000000000000 x0 : 000000003000188e
[ 7165.567872] Call trace:
[ 7165.570309] dereg_device_v3_hw+0x68/0xa8 [hisi_sas_v3_hw]
[ 7165.575775] hisi_sas_abort_task+0x248/0x358 [hisi_sas_main]
[ 7165.581415] sas_eh_handle_sas_errors+0x258/0x8e0 [libsas]
[ 7165.586876] sas_scsi_recover_host+0x134/0x458 [libsas]
[ 7165.592082] scsi_error_handler+0xb4/0x488
[ 7165.596163] kthread+0x134/0x138
[ 7165.599380] ret_from_fork+0x10/0x18
[ 7165.602940] Code: d5033e9f b9000040 aa0103e2 eb03003f (f9400021)
[ 7165.609004] kernel fault(0x1) notification starting on CPU 75
[ 7165.700728] ---[ end trace fc042cbbea224efc ]---
[ 7165.705326] Kernel panic - not syncing: Fatal exception
To fix the issue, grab sas_dev lock when traversing the members of
sas_dev.list in dereg_device_v3_hw() and hisi_sas_release_tasks() to avoid
concurrency of adding and deleting member. When
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Take RTNL lock when needed before calling xdp_set_features()
Hold RTNL lock when calling xdp_set_features() with a registered netdev,
as the call triggers the netdev notifiers. This could happen when
switching from uplink rep to nic profile for example.
This resolves the following call trace:
RTNL: assertion failed at net/core/dev.c (1953)
WARNING: CPU: 6 PID: 112670 at net/core/dev.c:1953 call_netdevice_notifiers_info+0x7c/0x80
Modules linked in: sch_mqprio sch_mqprio_lib act_tunnel_key act_mirred act_skbedit cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress bonding ib_umad ip_gre rdma_ucm mlx5_vfio_pci ipip tunnel4 ip6_gre gre mlx5_ib vfio_pci vfio_pci_core vfio_iommu_type1 ib_uverbs vfio mlx5_core ib_ipoib geneve nf_tables ip6_tunnel tunnel6 iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs]
CPU: 6 PID: 112670 Comm: devlink Not tainted 6.4.0-rc7_for_upstream_min_debug_2023_06_28_17_02 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:call_netdevice_notifiers_info+0x7c/0x80
Code: 90 ff 80 3d 2d 6b f7 00 00 75 c5 ba a1 07 00 00 48 c7 c6 e4 ce 0b 82 48 c7 c7 c8 f4 04 82 c6 05 11 6b f7 00 01 e8 a4 7c 8e ff <0f> 0b eb a2 0f 1f 44 00 00 55 48 89 e5 41 54 48 83 e4 f0 48 83 ec
RSP: 0018:ffff8882a21c3948 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff82e6f880 RCX: 0000000000000027
RDX: ffff88885f99b5c8 RSI: 0000000000000001 RDI: ffff88885f99b5c0
RBP: 0000000000000028 R08: ffff88887ffabaa8 R09: 0000000000000003
R10: ffff88887fecbac0 R11: ffff88887ff7bac0 R12: ffff8882a21c3968
R13: ffff88811c018940 R14: 0000000000000000 R15: ffff8881274401a0
FS: 00007fe141c81800(0000) GS:ffff88885f980000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f787c28b948 CR3: 000000014bcf3005 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn+0x79/0x120
? call_netdevice_notifiers_info+0x7c/0x80
? report_bug+0x17c/0x190
? handle_bug+0x3c/0x60
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? call_netdevice_notifiers_info+0x7c/0x80
? call_netdevice_notifiers_info+0x7c/0x80
call_netdevice_notifiers+0x2e/0x50
mlx5e_set_xdp_feature+0x21/0x50 [mlx5_core]
mlx5e_nic_init+0xf1/0x1a0 [mlx5_core]
mlx5e_netdev_init_profile+0x76/0x110 [mlx5_core]
mlx5e_netdev_attach_profile+0x1f/0x90 [mlx5_core]
mlx5e_netdev_change_profile+0x92/0x160 [mlx5_core]
mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
mlx5e_vport_rep_unload+0xaa/0xc0 [mlx5_core]
__esw_offloads_unload_rep+0x52/0x60 [mlx5_core]
mlx5_esw_offloads_rep_unload+0x52/0x70 [mlx5_core]
esw_offloads_unload_rep+0x34/0x70 [mlx5_core]
esw_offloads_disable+0x2b/0x90 [mlx5_core]
mlx5_eswitch_disable_locked+0x1b9/0x210 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0xf5/0x630 [mlx5_core]
? devlink_get_from_attrs_lock+0x9e/0x110
devlink_nl_cmd_eswitch_set_doit+0x60/0xe0
genl_family_rcv_msg_doit.isra.0+0xc2/0x110
genl_rcv_msg+0x17d/0x2b0
? devlink_get_from_attrs_lock+0x110/0x110
? devlink_nl_cmd_eswitch_get_doit+0x290/0x290
? devlink_pernet_pre_exit+0xf0/0xf0
? genl_family_rcv_msg_doit.isra.0+0x110/0x110
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1f6/0x2c0
netlink_sendmsg+0x232/0x4a0
sock_sendmsg+0x38/0x60
? _copy_from_user+0x2a/0x60
__sys_sendto+0x110/0x160
? __count_memcg_events+0x48/0x90
? handle_mm_fault+0x161/0x260
? do_user_addr_fault+0x278/0x6e0
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033
---truncated--- |
| A SQL injection vulnerability has been identified in Uniclare Student Portal v2. This flaw allows remote attackers to inject arbitrary SQL commands via vulnerable input fields, enabling the execution of time-delay functions to infer database responses. |
| Directory Traversal vulnerability in EndRun Technologies Sonoma D12 Network Time Server (GPS) F/W 6010-0076-000 Ver 4.00 allows attackers to gain sensitive information. |
