| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Validation of Specified Quantity in Input in ZenHive mpp allows an unauthenticated remote client to inflate the fee-payer's gas cost per sponsored payment by a large multiplier and to have the sponsor pay for EIP-7702 account delegations of the client's choosing.
When the server sponsors Tempo payments, MPP.Methods.Tempo.FeePayerPolicy.measure/3 in lib/mpp/methods/tempo/fee_payer_policy.ex bounds the gas fields, the fee budget, the validity window and the access list of the client-signed 0x76 envelope, but never reads its aa_authorization_list field. Every signed delegation in that list is charged as intrinsic gas before the payment call runs, so a client attaching delegations from throwaway authority keys makes the sponsor pay for them within the default gas_limit ceiling. At the reporter's default of seven entries the sponsored cost rises from about 46,575 gas to about 1,884,087 gas. Because each entry is applied as a persistent set-code delegation, a client can also upgrade its own accounts to delegated code at the sponsor's expense.
This issue affects mpp: from 0.2.0 before 0.16.1. |
| An issue in the l2cap_handle_data() function of Bestechnic Co., Ltd BES2300 Bluetooth Audio SoC firmware v3.x and earlier allows attackers to cause a Denial of Service (DoS) via sending a crafted L2CAP packet. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: validate reply type before using icmp_pointers
Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type.
That value is outside the range covered by icmp_pointers[], which only
describes the traditional ICMP types up to NR_ICMP_TYPES.
Avoid consulting icmp_pointers[] for reply types outside that range, and
use array_index_nospec() for the remaining in-range lookup. Normal ICMP
replies keep their existing behavior unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - reject short ahash digests during instance creation
authencesn requires either a zero authsize or an authsize of at least
4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of
high-order sequence number data at the end of the authenticated data.
While crypto_authenc_esn_setauthsize() already rejects explicit
non-zero authsizes in the range 1..3, crypto_authenc_esn_create()
still copied auth->digestsize into inst->alg.maxauthsize without
validating it. The AEAD core then initialized the tfm's default
authsize from that value.
As a result, selecting an ahash with digest size 1..3, such as
cbcmac(cipher_null), exposed authencesn instances whose default
authsize was invalid even though setauthsize() would have rejected the
same value. AF_ALG could then trigger the ESN tail handling with a
too-short tag and hit an out-of-bounds access.
Reject authencesn instances whose ahash digest size is in the invalid
non-zero range 1..3 so that no tfm can inherit an unsupported default
authsize. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_multiport: validate range encoding in checkentry
ports_match_v1() treats any non-zero pflags entry as the start of a
port range and unconditionally consumes the next ports[] element as
the range end.
The checkentry path currently validates protocol, flags and count, but
it does not validate the range encoding itself. As a result, malformed
rules can mark the last slot as a range start or place two range starts
back to back, leaving ports_match_v1() to step past the last valid
ports[] element while interpreting the rule.
Reject malformed multiport v1 rules in checkentry by validating that
each range start has a following element and that the following element
is not itself marked as another range start. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate p_idx bounds in ext4_ext_correct_indexes
ext4_ext_correct_indexes() walks up the extent tree correcting
index entries when the first extent in a leaf is modified. Before
accessing path[k].p_idx->ei_block, there is no validation that
p_idx falls within the valid range of index entries for that
level.
If the on-disk extent header contains a corrupted or crafted
eh_entries value, p_idx can point past the end of the allocated
buffer, causing a slab-out-of-bounds read.
Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at
both access sites: before the while loop and inside it. Return
-EFSCORRUPTED if the index pointer is out of range, consistent
with how other bounds violations are handled in the ext4 extent
tree code. |
| Net::IP::LPM version 1.10 for Perl does not properly consider leading zero characters in IP CIDR address strings, which could allow attackers to bypass access control that is based on IP addresses.
Leading zeros are used to indicate octal numbers, which can confuse users who are intentionally using octal notation, as well as users who believe they are using decimal notation. |
| YesWiki is a wiki system written in PHP. Prior to version 4.6.6, the recentchanges action (actions/recentchanges.php) accepts a period argument from two disjoint parameter spaces. A whitelist validates only the URL form against ['day','week','month']. The action-argument form takes the else branch with no validation, and the value flows into PageManager::getRecentlyChanged(), where it is interpolated into a WHERE time >= '...' ORDER BY time DESC clause without escaping or parameterization. UNION-based injection succeeds, the leaked rows render into the response page, so any visitor of the trigger page sees the exfiltrated data. The vulnerability provides arbitrary read of the YesWiki database to anyone who can save the trigger page. On a default install (default_write_acl='*'), this includes anonymous users, subject to the hashcash JS check on the page-edit form. Once the trigger page is saved, every subsequent view fires the injection as the SQLi is stored. Stored SQL injection is reachable through the page-edit flow, with arbitrary database read. This issue has been patched in version 4.6.6. |
| fastify versions before 5.12.2 decide whether to compile a request schema based on JavaScript truthiness, but JSON Schema Draft 7 defines the boolean false as a valid schema that rejects every instance. When an application assigns false to a route's body, querystring, params, or headers schema to deny all input, fastify treats it as a missing schema, compiles no validator, and runs the route handler on any request. An unauthenticated remote client can therefore reach a handler that a valid deny-all schema was intended to make unreachable, a complete validation bypass that can lead to unauthorized state changes or execution of disabled operations. Users should upgrade to fastify 5.12.2 or later. |
| A maliciously crafted input, when processed by the Autodesk Installer IPC frame parser, may trigger improper validation of an input-specified position or offset, resulting in an out-of-range substring operation. A malicious actor may leverage this vulnerability to cause the NT AUTHORITY\SYSTEM service to terminate unexpectedly, resulting in a denial-of-service condition. |
| DeadLetterPublishingRecovererFactory reads the retry_topic-original-timestamp header from an inbound ConsumerRecord and passes its raw bytes directly to new BigInteger(header.value()) with no length or format validation.
Spring for Apache Kafka 4.1.0
Spring for Apache Kafka 4.0.0 - 4.0.6
Spring for Apache Kafka 3.0.0 - 3.3.16
Spring for Apache Kafka 2.9.0 - 2.9.14
Spring for Apache Kafka 2.8.12 and earlier |
| fastify versions before 5.12.2 implement the case-insensitive nature of HTTP header names by lowercasing names in a route's header schema before compiling it, but the transformation is incomplete: it lowercases the properties keys and the root-level required array, and does not lowercase the trigger and dependent names inside the JSON Schema Draft 7 dependencies keyword. Because Node stores request header names in lowercase, a canonical-case dependency such as requiring an authentication header whenever a privileged-mode header is present never matches, and the presence assertion is silently skipped. An unauthenticated remote client can therefore send the header that activates a privileged branch while omitting the header the dependency was meant to require, bypassing the conditional check. Users should upgrade to fastify 5.12.2 or later. |
| fast-uri accepts a host that contains an unbalanced or misplaced authority bracket without reporting an error. A host that starts with an opening bracket but does not end with a closing bracket is neither validated as an IP literal nor canonicalized as a domain name, so parse() returns it as the host with error undefined, while Node's URL and the HTTP clients built on it resolve the same string to a different host. An application that reads the parsed host to make a host decision, such as an SSRF denylist, a redirect allowlist, or proxy routing, and then passes the original URL to an HTTP client evaluates its policy against a string that is not the host the request reaches. The same host is carried through normalize, equal, and resolve. This affects fast-uri versions 2.4.5, 3.1.6, and 4.1.3, and is fixed in 2.4.6, 3.1.7, and 4.1.4, where parse() reports a malformed host for any host that contains a bracket but is not a valid IPv6 literal. |
| pymonocypher uses cython to wrap the Monocypher C library. Prior to version 4.0.2.8, the argon2i_32 implementation does not check the nb_blocks size. If the caller does not provide a sufficiently large buffer based on the API contract, then argon2i_32 will write past the end of the buffer and possibly corrupt the heap. This issue has been patched in version 4.0.2.8. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: validate free block extents against the partition length
udf_free_blocks() checks the logical block number and count against the
partition length, but drops the extent offset from that final bound. A
crafted extent can pass the guard while logicalBlockNum + offset + count
points past the partition, which later indexes past the space bitmap
array.
A single ftruncate(2) on a file backed by such an extent reliably
panics the kernel. This is a local availability issue. On desktop
systems where UDisks/polkit allows the active user to mount removable
UDF media without CAP_SYS_ADMIN, an unprivileged local user can supply
the crafted filesystem and trigger the panic by truncating a writable
file on it. Systems that require root or CAP_SYS_ADMIN to mount the
image have a higher prerequisite.
No confidentiality or integrity impact is claimed: the reproduced
primitive is an out-of-bounds read of a bitmap pointer slot followed by
a kernel panic.
Use the already computed logicalBlockNum + offset + count value for the
partition length check. Also make load_block_bitmap() reject an
out-of-range block group before indexing s_block_bitmap[], so corrupted
callers cannot walk past the flexible array. |
| jq is a command-line JSON processor. Prior to version 1.8.2, the _strindices builtin in jq's src/builtin.c passes its arguments directly to jv_string_indexes() without verifying they are strings, and jv_string_indexes() in src/jv.c relies solely on assert() checks that are stripped in release builds compiled with -DNDEBUG. This allows an attacker to crash jq trivially with input like _strindices(0), and by crafting a numeric value whose IEEE-754 bit pattern maps to a chosen pointer, achieve a controlled pointer dereference and limited memory read/probe primitive. Any deployment that evaluates untrusted jq filters against a release build is vulnerable. This issue has been patched in commit fdf8ef0f0810e3d365cdd5160de43db46f57ed03, which is part of version 1.8.2. |
| Starlette is a lightweight ASGI framework/toolkit. Prior to version 1.0.1, the HTTP `Host` request header was not validated before being used to reconstruct `request.url`. Because the routing algorithm relies on the raw HTTP path while `request.url` is rebuilt from the `Host` header, a malformed header could make `request.url.path` differ from the path that was actually requested. Middleware and endpoints that apply security restrictions based on `request.url` (rather than the raw `scope` path) could therefore be bypassed. Users should upgrade to a version greater than or equal to version 1.0.1, which validates the `Host` header against the grammar of RFC 9112 §3.2 / RFC 3986 §3.2.2 when constructing `request.url` and falls back to `scope["server"]` for malformed values. |
| url.Parse insufficiently validated the host/authority component and accepted some invalid URLs. |
| node-forge through 1.4.0 fails to validate element count in nested DigestAlgorithm sequences during RSA PKCS#1 v1.5 signature verification. Attackers can embed garbage bytes inside the DigestAlgorithm sequence to forge valid signatures for arbitrary messages using low-exponent RSA keys. This is an incomplete fix for CVE-2026-33894. |
