| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Drain deferred trigger frees if kthread creation fails
Boot-time trigger registration can fail before the trigger-data cleanup
kthread exists. Deferring those frees until late init is fine, but the
post-boot fallback must still drain the deferred list if kthread
creation never succeeds.
Otherwise, boot-deferred nodes can accumulate on
trigger_data_free_list, later frees fall back to synchronously freeing
only the current object, and the older queued entries are leaked
forever.
To trigger this, add the following to the kernel command line:
trace_event=sched_switch trace_trigger=sched_switch.traceon,sched_switch.traceon
The second traceon trigger will fail and be freed. This triggers a NULL
pointer dereference and crashes the kernel.
Keep the deferred boot-time behavior, but when kthread creation fails,
drain the whole queued list synchronously. Do the same in the late-init
drain path so queued entries are not stranded there either. |
| This issue was addressed by improved management of object lifetimes. This issue is fixed in macOS Sequoia 15.3, macOS Sonoma 14.7.3, macOS Ventura 13.7.3. An attacker may be able to cause unexpected app termination. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix leak of rxgk context in rxgk_verify_response()
Fix rxgk_verify_response() to clean up the rxgk context it creates. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix key parsing memleak
In rxrpc_preparse_xdr_yfs_rxgk(), the memory attached to token->rxgk can be
leaked in a few error paths after it's allocated.
Fix this by freeing it in the "reject_token:" case. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: fix page pool leak in error paths
lan966x_fdma_rx_alloc() creates a page pool but does not destroy it if
the subsequent fdma_alloc_coherent() call fails, leaking the pool.
Similarly, lan966x_fdma_init() frees the coherent DMA memory when
lan966x_fdma_tx_alloc() fails but does not destroy the page pool that
was successfully created by lan966x_fdma_rx_alloc(), leaking it.
Add the missing page_pool_destroy() calls in both error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit()
When dma_map_single() fails in tse_start_xmit(), the function returns
NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the
stack the packet was consumed, the skb is never freed, leaking memory
on every DMA mapping failure.
Add dev_kfree_skb_any() before returning to properly free the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vma: fix memory leak in __mmap_region()
commit 605f6586ecf7 ("mm/vma: do not leak memory when .mmap_prepare
swaps the file") handled the success path by skipping get_file() via
file_doesnt_need_get, but missed the error path.
When /dev/zero is mmap'd with MAP_SHARED, mmap_zero_prepare() calls
shmem_zero_setup_desc() which allocates a new shmem file to back the
mapping. If __mmap_new_vma() subsequently fails, this replacement
file is never fput()'d - the original is released by
ksys_mmap_pgoff(), but nobody releases the new one.
Add fput() for the swapped file in the error path.
Reproducible with fault injection.
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
CPU: 2 UID: 0 PID: 366 Comm: syz.7.14 Not tainted 7.0.0-rc6 #2 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x164/0x1f0
should_fail_ex+0x525/0x650
should_failslab+0xdf/0x140
kmem_cache_alloc_noprof+0x78/0x630
vm_area_alloc+0x24/0x160
__mmap_region+0xf6b/0x2660
mmap_region+0x2eb/0x3a0
do_mmap+0xc79/0x1240
vm_mmap_pgoff+0x252/0x4c0
ksys_mmap_pgoff+0xf8/0x120
__x64_sys_mmap+0x12a/0x190
do_syscall_64+0xa9/0x580
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
BUG: memory leak
unreferenced object 0xffff8881118aca80 (size 360):
comm "syz.7.14", pid 366, jiffies 4294913255
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff c0 28 4d ae ff ff ff ff .........(M.....
backtrace (crc db0f53bc):
kmem_cache_alloc_noprof+0x3ab/0x630
alloc_empty_file+0x5a/0x1e0
alloc_file_pseudo+0x135/0x220
__shmem_file_setup+0x274/0x420
shmem_zero_setup_desc+0x9c/0x170
mmap_zero_prepare+0x123/0x140
__mmap_region+0xdda/0x2660
mmap_region+0x2eb/0x3a0
do_mmap+0xc79/0x1240
vm_mmap_pgoff+0x252/0x4c0
ksys_mmap_pgoff+0xf8/0x120
__x64_sys_mmap+0x12a/0x190
do_syscall_64+0xa9/0x580
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Found by syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: dealloc repeat_call_control if damon_call() fails
damon_call() for repeat_call_control of DAMON_SYSFS could fail if somehow
the kdamond is stopped before the damon_call(). It could happen, for
example, when te damon context was made for monitroing of a virtual
address processes, and the process is terminated immediately, before the
damon_call() invocation. In the case, the dyanmically allocated
repeat_call_control is not deallocated and leaked.
Fix the leak by deallocating the repeat_call_control under the
damon_call() failure.
This issue is discovered by sashiko [1]. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/stat: deallocate damon_call() failure leaking damon_ctx
damon_stat_start() always allocates the module's damon_ctx object
(damon_stat_context). Meanwhile, if damon_call() in the function fails,
the damon_ctx object is not deallocated. Hence, if the damon_call() is
failed, and the user writes Y to “enabled” again, the previously
allocated damon_ctx object is leaked.
This cannot simply be fixed by deallocating the damon_ctx object when
damon_call() fails. That's because damon_call() failure doesn't guarantee
the kdamond main function, which accesses the damon_ctx object, is
completely finished. In other words, if damon_stat_start() deallocates
the damon_ctx object after damon_call() failure, the not-yet-terminated
kdamond could access the freed memory (use-after-free).
Fix the leak while avoiding the use-after-free by keeping returning
damon_stat_start() without deallocating the damon_ctx object after
damon_call() failure, but deallocating it when the function is invoked
again and the kdamond is completely terminated. If the kdamond is not yet
terminated, simply return -EAGAIN, as the kdamond will soon be terminated.
The issue was discovered [1] by sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: scrub: unlock dquot before early return in quota scrub
xchk_quota_item can return early after calling xchk_fblock_process_error.
When that helper returns false, the function returned immediately without
dropping dq->q_qlock, which can leave the dquot lock held and risk lock
leaks or deadlocks in later quota operations.
Fix this by unlocking dq->q_qlock before the early return. |
| Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: DML). Supported versions that are affected are 8.0.0-8.0.45, 8.4.0-8.4.8 and 9.0.0-9.6.0. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H). |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid infinite loops caused by residual data
On the mkdir/mknod path, when mapping logical blocks to physical blocks,
if inserting a new extent into the extent tree fails (in this example,
because the file system disabled the huge file feature when marking the
inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to
reclaim the physical block without deleting the corresponding data in
the extent tree. This causes subsequent mkdir operations to reference
the previously reclaimed physical block number again, even though this
physical block is already being used by the xattr block. Therefore, a
situation arises where both the directory and xattr are using the same
buffer head block in memory simultaneously.
The above causes ext4_xattr_block_set() to enter an infinite loop about
"inserted" and cannot release the inode lock, ultimately leading to the
143s blocking problem mentioned in [1].
If the metadata is corrupted, then trying to remove some extent space
can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE
was passed, remove space wrongly update quota information.
Jan Kara suggests distinguishing between two cases:
1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully
consistent and we must maintain its consistency including all the
accounting. However these errors can happen only early before we've
inserted the extent into the extent tree. So current code works correctly
for this case.
2) Some other error - this means metadata is corrupted. We should strive to
do as few modifications as possible to limit damage. So I'd just skip
freeing of allocated blocks.
[1]
INFO: task syz.0.17:5995 blocked for more than 143 seconds.
Call Trace:
inode_lock_nested include/linux/fs.h:1073 [inline]
__start_dirop fs/namei.c:2923 [inline]
start_dirop fs/namei.c:2934 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssg-prueth: Fix memory leak in XDP_DROP for non-zero-copy mode
Page recycling was removed from the XDP_DROP path in emac_run_xdp() to
avoid conflicts with AF_XDP zero-copy mode, which uses xsk_buff_free()
instead.
However, this causes a memory leak when running XDP programs that drop
packets in non-zero-copy mode (standard page pool mode). The pages are
never returned to the page pool, leading to OOM conditions.
Fix this by handling cleanup in the caller, emac_rx_packet().
When emac_run_xdp() returns ICSSG_XDP_CONSUMED for XDP_DROP, the
caller now recycles the page back to the page pool. The zero-copy
path, emac_rx_packet_zc() already handles cleanup correctly with
xsk_buff_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
nf_tables: nft_dynset: fix possible stateful expression memleak in error path
If cloning the second stateful expression in the element via GFP_ATOMIC
fails, then the first stateful expression remains in place without being
released.
unreferenced object (percpu) 0x607b97e9cab8 (size 16):
comm "softirq", pid 0, jiffies 4294931867
hex dump (first 16 bytes on cpu 3):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
backtrace (crc 0):
pcpu_alloc_noprof+0x453/0xd80
nft_counter_clone+0x9c/0x190 [nf_tables]
nft_expr_clone+0x8f/0x1b0 [nf_tables]
nft_dynset_new+0x2cb/0x5f0 [nf_tables]
nft_rhash_update+0x236/0x11c0 [nf_tables]
nft_dynset_eval+0x11f/0x670 [nf_tables]
nft_do_chain+0x253/0x1700 [nf_tables]
nft_do_chain_ipv4+0x18d/0x270 [nf_tables]
nf_hook_slow+0xaa/0x1e0
ip_local_deliver+0x209/0x330 |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: complete pending data exchange on device close
In nci_close_device(), complete any pending data exchange before
closing. The data exchange callback (e.g.
rawsock_data_exchange_complete) holds a socket reference.
NIPA occasionally hits this leak:
unreferenced object 0xff1100000f435000 (size 2048):
comm "nci_dev", pid 3954, jiffies 4295441245
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
27 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............
backtrace (crc ec2b3c5):
__kmalloc_noprof+0x4db/0x730
sk_prot_alloc.isra.0+0xe4/0x1d0
sk_alloc+0x36/0x760
rawsock_create+0xd1/0x540
nfc_sock_create+0x11f/0x280
__sock_create+0x22d/0x630
__sys_socket+0x115/0x1d0
__x64_sys_socket+0x72/0xd0
do_syscall_64+0x117/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix admin queue leak on controller reset
When nvme_alloc_admin_tag_set() is called during a controller reset,
a previous admin queue may still exist. Release it properly before
allocating a new one to avoid orphaning the old queue.
This fixes a regression introduced by commit 03b3bcd319b3 ("nvme: fix
admin request_queue lifetime"). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/queue: Call fini on exec queue creation fail
Every call to queue init should have a corresponding fini call.
Skipping this would mean skipping removal of the queue from GuC list
(which is part of guc_id allocation). A damaged queue stored in
exec_queue_lookup list would lead to invalid memory reference,
sooner or later.
Call fini to free guc_id. This must be done before any internal
LRCs are freed.
Since the finalization with this extra call became very similar to
__xe_exec_queue_fini(), reuse that. To make this reuse possible,
alter xe_lrc_put() so it can survive NULL parameters, like other
similar functions.
v2: Reuse _xe_exec_queue_fini(). Make xe_lrc_put() aware of NULLs.
(cherry picked from commit 393e5fea6f7d7054abc2c3d97a4cfe8306cd6079) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/reg_sr: Fix leak on xa_store failure
Free the newly allocated entry when xa_store() fails to avoid a memory
leak on the error path.
v2: use goto fail_free. (Bala)
(cherry picked from commit 6bc6fec71ac45f52db609af4e62bdb96b9f5fadb) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/configfs: Free ctx_restore_mid_bb in release
ctx_restore_mid_bb memory is allocated in wa_bb_store(), but
xe_config_device_release() only frees ctx_restore_post_bb.
Free ctx_restore_mid_bb[0].cs as well to avoid leaking the allocation
when the configfs device is removed.
(cherry picked from commit a235e7d0098337c3f2d1e8f3610c719a589e115f) |
