Total
55 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-0809 | 2 Eclipse, Redhat | 3 Mosquitto, Satellite, Satellite Capsule | 2024-09-20 | 5.8 Medium |
| In Mosquitto before 2.0.16, excessive memory is allocated based on malicious initial packets that are not CONNECT packets. | ||||
| CVE-2022-22226 | 1 Juniper | 35 Ex4300, Ex4300-24p, Ex4300-24p-s and 32 more | 2024-09-17 | 6.5 Medium |
| In VxLAN scenarios on EX4300-MP, EX4600, QFX5000 Series devices an Uncontrolled Memory Allocation vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated adjacently located attacker sending specific packets to cause a Denial of Service (DoS) condition by crashing one or more PFE's when they are received and processed by the device. Upon automatic restart of the PFE, continued processing of these packets will cause the memory leak to reappear. Depending on the volume of packets received the attacker may be able to create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on EX4300-MP, EX4600, QFX5000 Series: 17.1 version 17.1R1 and later versions prior to 17.3R3-S12; 17.4 versions prior to 17.4R2-S13, 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R1-S8, 18.4R2-S6, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S7, 19.2R3-S1; 19.3 versions prior to 19.3R2-S6, 19.3R3-S1; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2. This issue does not affect Junos OS versions prior to 17.1R1. | ||||
| CVE-2022-31804 | 1 Codesys | 1 Gateway | 2024-09-16 | 7.5 High |
| The CODESYS Gateway Server V2 does not verifiy that the size of a request is within expected limits. An unauthenticated attacker may allocate an arbitrary amount of memory, which may lead to a crash of the Gateway due to an out-of-memory condition. | ||||
| CVE-2022-22188 | 1 Juniper | 8 Ex4600, Ex4650, Junos and 5 more | 2024-09-16 | 7.5 High |
| An Uncontrolled Memory Allocation vulnerability leading to a Heap-based Buffer Overflow in the packet forwarding engine (PFE) of Juniper Networks Junos OS allows a network-based unauthenticated attacker to flood the device with traffic leading to a Denial of Service (DoS). The device must be configured with storm control profiling limiting the number of unknown broadcast, multicast, or unicast traffic to be vulnerable to this issue. This issue affects: Juniper Networks Junos OS on QFX5100/QFX5110/QFX5120/QFX5200/QFX5210/EX4600/EX4650 Series; 20.2 version 20.2R1 and later versions prior to 20.2R2. This issue does not affect: Juniper Networks Junos OS versions prior to 20.2R1. | ||||
| CVE-2024-41132 | 1 Sixlabors | 1 Imagesharp | 2024-09-11 | 5.3 Medium |
| ImageSharp is a 2D graphics API. A vulnerability discovered in the ImageSharp library, where the processing of specially crafted files can lead to excessive memory usage in the Gif decoder. The vulnerability is triggered when ImageSharp attempts to process image files that are designed to exploit this flaw. All users are advised to upgrade to v3.1.5 or v2.1.9. | ||||
| CVE-2023-5371 | 1 Wireshark | 1 Wireshark | 2024-08-29 | 5.3 Medium |
| RTPS dissector memory leak in Wireshark 4.0.0 to 4.0.8 and 3.6.0 to 3.6.16 allows denial of service via packet injection or crafted capture file | ||||
| CVE-2024-35152 | 1 Ibm | 1 Db2 | 2024-08-23 | 6.5 Medium |
| IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 11.5 could allow an authenticated user to cause a denial of service with a specially crafted query due to improper memory allocation. IBM X-Force ID: 292639. | ||||
| CVE-2024-37529 | 1 Ibm | 1 Db2 | 2024-08-23 | 6.5 Medium |
| IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 11.1 and 11.5 could allow an authenticated user to cause a denial of service with a specially crafted query due to improper memory allocation. IBM X-Force ID: 294295. | ||||
| CVE-2024-35116 | 1 Ibm | 2 Mq, Mq Appliance | 2024-08-21 | 5.9 Medium |
| IBM MQ 9.0 LTS, 9.1 LTS, 9.2 LTS, 9.3 LTS, and 9.3 CD is vulnerable to a denial of service attack caused by an error applying configuration changes. IBM X-Force ID: 290335. | ||||
| CVE-2017-20016 | 1 Weka | 1 Interest Security Scanner | 2024-08-05 | 4.3 Medium |
| A vulnerability has been found in WEKA INTEREST Security Scanner up to 1.8 and classified as problematic. This vulnerability affects unknown code of the component Portscan. The manipulation with an unknown input leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer | ||||
| CVE-2017-7651 | 2 Debian, Eclipse | 2 Debian Linux, Mosquitto | 2024-08-05 | N/A |
| In Eclipse Mosquitto 1.4.14, a user can shutdown the Mosquitto server simply by filling the RAM memory with a lot of connections with large payload. This can be done without authentications if occur in connection phase of MQTT protocol. | ||||
| CVE-2017-7652 | 2 Debian, Eclipse | 2 Debian Linux, Mosquitto | 2024-08-05 | N/A |
| In Eclipse Mosquitto 1.4.14, if a Mosquitto instance is set running with a configuration file, then sending a HUP signal to server triggers the configuration to be reloaded from disk. If there are lots of clients connected so that there are no more file descriptors/sockets available (default limit typically 1024 file descriptors on Linux), then opening the configuration file will fail. | ||||
| CVE-2018-12541 | 2 Eclipse, Redhat | 3 Vert.x, Jboss Fuse, Openshift Application Runtimes | 2024-08-05 | 6.5 Medium |
| In version from 3.0.0 to 3.5.3 of Eclipse Vert.x, the WebSocket HTTP upgrade implementation buffers the full http request before doing the handshake, holding the entire request body in memory. There should be a reasonnable limit (8192 bytes) above which the WebSocket gets an HTTP response with the 413 status code and the connection gets closed. | ||||
| CVE-2020-24685 | 1 Abb | 3 Ac500 Cpu Firmware, Pm573-eth, Pm583-eth | 2024-08-04 | 8.6 High |
| An unauthenticated specially crafted packet sent by an attacker over the network will cause a denial-of-service (DoS) vulnerability. Vulnerability allows attacker to stop the PLC. After stopping (ERR LED flashing red), physical access to the PLC is required in order to restart the application. This issue affects: ABB AC500 V2 products with onboard Ethernet version 2.8.4 and prior versions. | ||||
| CVE-2020-8552 | 3 Fedoraproject, Kubernetes, Redhat | 3 Fedora, Kubernetes, Openshift | 2024-08-04 | 5.3 Medium |
| The Kubernetes API server component in versions prior to 1.15.9, 1.16.0-1.16.6, and 1.17.0-1.17.2 has been found to be vulnerable to a denial of service attack via successful API requests. | ||||
| CVE-2020-8551 | 3 Fedoraproject, Kubernetes, Redhat | 3 Fedora, Kubernetes, Openshift | 2024-08-04 | 4.3 Medium |
| The Kubelet component in versions 1.15.0-1.15.9, 1.16.0-1.16.6, and 1.17.0-1.17.2 has been found to be vulnerable to a denial of service attack via the kubelet API, including the unauthenticated HTTP read-only API typically served on port 10255, and the authenticated HTTPS API typically served on port 10250. | ||||
| CVE-2020-5303 | 1 Tendermint | 1 Tendermint | 2024-08-04 | 3.1 Low |
| Tendermint before versions 0.33.3, 0.32.10, and 0.31.12 has a denial-of-service vulnerability. Tendermint does not limit the number of P2P connection requests. For each p2p connection, it allocates XXX bytes. Even though this memory is garbage collected once the connection is terminated (due to duplicate IP or reaching a maximum number of inbound peers), temporary memory spikes can lead to OOM (Out-Of-Memory) exceptions. Additionally, Tendermint does not reclaim activeID of a peer after it's removed in Mempool reactor. This does not happen all the time. It only happens when a connection fails (for any reason) before the Peer is created and added to all reactors. RemovePeer is therefore called before AddPeer, which leads to always growing memory (activeIDs map). The activeIDs map has a maximum size of 65535 and the node will panic if this map reaches the maximum. An attacker can create a lot of connection attempts (exploiting above denial of service), which ultimately will lead to the node panicking. These issues are patched in Tendermint 0.33.3 and 0.32.10. | ||||
| CVE-2021-34868 | 1 Parallels | 1 Parallels | 2024-08-04 | 8.8 High |
| This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop 16.1.3-49160. An attacker must first obtain the ability to execute low-privileged code on the target guest system in order to exploit this vulnerability. The specific flaw exists within the Toolgate component. The issue results from the lack of proper validation of user-supplied data, which can result in an uncontrolled memory allocation. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the hypervisor. Was ZDI-CAN-13712. | ||||
| CVE-2021-34869 | 1 Parallels | 1 Parallels | 2024-08-04 | 8.8 High |
| This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop 16.1.3-49160. An attacker must first obtain the ability to execute low-privileged code on the target guest system in order to exploit this vulnerability. The specific flaw exists within the Toolgate component. The issue results from the lack of proper validation of user-supplied data, which can result in an uncontrolled memory allocation. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the hypervisor. Was ZDI-CAN-13797. | ||||
| CVE-2021-34867 | 1 Parallels | 1 Parallels | 2024-08-04 | 8.2 High |
| This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop 16.1.3-49160. An attacker must first obtain the ability to execute high-privileged code on the target guest system in order to exploit this vulnerability. The specific flaw exists within the Toolgate component. The issue results from the lack of proper validation of user-supplied data, which can result in an uncontrolled memory allocation. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the hypervisor. Was ZDI-CAN-13672. | ||||