| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: revert back to __readahead_folio() for readahead
In commit 3eab9d7bc2f4 ("fuse: convert readahead to use folios"), the
logic was converted to using the new folio readahead code, which drops
the reference on the folio once it is locked, using an inferred
reference on the folio. Previously we held a reference on the folio for
the entire duration of the readpages call.
This is fine, however for the case for splice pipe responses where we
will remove the old folio and splice in the new folio (see
fuse_try_move_page()), we assume that there is a reference held on the
folio for ap->folios, which is no longer the case.
To fix this, revert back to __readahead_folio() which allows us to hold
the reference on the folio for the duration of readpages until either we
drop the reference ourselves in fuse_readpages_end() or the reference is
dropped after it's replaced in the page cache in the splice case.
This will fix the UAF bug that was reported. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list
Syskaller triggers a warning due to prev_epc->pmu != next_epc->pmu in
perf_event_swap_task_ctx_data(). vmcore shows that two lists have the same
perf_event_pmu_context, but not in the same order.
The problem is that the order of pmu_ctx_list for the parent is impacted by
the time when an event/PMU is added. While the order for a child is
impacted by the event order in the pinned_groups and flexible_groups. So
the order of pmu_ctx_list in the parent and child may be different.
To fix this problem, insert the perf_event_pmu_context to its proper place
after iteration of the pmu_ctx_list.
The follow testcase can trigger above warning:
# perf record -e cycles --call-graph lbr -- taskset -c 3 ./a.out &
# perf stat -e cpu-clock,cs -p xxx // xxx is the pid of a.out
test.c
void main() {
int count = 0;
pid_t pid;
printf("%d running\n", getpid());
sleep(30);
printf("running\n");
pid = fork();
if (pid == -1) {
printf("fork error\n");
return;
}
if (pid == 0) {
while (1) {
count++;
}
} else {
while (1) {
count++;
}
}
}
The testcase first opens an LBR event, so it will allocate task_ctx_data,
and then open tracepoint and software events, so the parent context will
have 3 different perf_event_pmu_contexts. On inheritance, child ctx will
insert the perf_event_pmu_context in another order and the warning will
trigger.
[ mingo: Tidied up the changelog. ] |
| FRRouting/frr from v4.0 through v10.4.1 was discovered to contain a NULL pointer dereference via the show_vty_ext_pref_pref_sid function at ospf_ext.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted OSPF packet. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: VFs do not support HWTSTAMP_TX_ONESTEP_SYNC
Actually ENETC VFs do not support HWTSTAMP_TX_ONESTEP_SYNC because only
ENETC PF can access PMa_SINGLE_STEP registers. And there will be a crash
if VFs are used to test one-step timestamp, the crash log as follows.
[ 129.110909] Unable to handle kernel paging request at virtual address 00000000000080c0
[ 129.287769] Call trace:
[ 129.290219] enetc_port_mac_wr+0x30/0xec (P)
[ 129.294504] enetc_start_xmit+0xda4/0xe74
[ 129.298525] enetc_xmit+0x70/0xec
[ 129.301848] dev_hard_start_xmit+0x98/0x118 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_payload: incorrect arithmetics when fetching VLAN header bits
If the offset + length goes over the ethernet + vlan header, then the
length is adjusted to copy the bytes that are within the boundaries of
the vlan_ethhdr scratchpad area. The remaining bytes beyond ethernet +
vlan header are copied directly from the skbuff data area.
Fix incorrect arithmetic operator: subtract, not add, the size of the
vlan header in case of double-tagged packets to adjust the length
accordingly to address CVE-2023-0179. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Fix overflow before widen in the bitmap_ip_create() function.
When first_ip is 0, last_ip is 0xFFFFFFFF, and netmask is 31, the value of
an arithmetic expression 2 << (netmask - mask_bits - 1) is subject
to overflow due to a failure casting operands to a larger data type
before performing the arithmetic.
Note that it's harmless since the value will be checked at the next step.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/imc-pmu: Fix use of mutex in IRQs disabled section
Current imc-pmu code triggers a WARNING with CONFIG_DEBUG_ATOMIC_SLEEP
and CONFIG_PROVE_LOCKING enabled, while running a thread_imc event.
Command to trigger the warning:
# perf stat -e thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ sleep 5
Performance counter stats for 'sleep 5':
0 thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/
5.002117947 seconds time elapsed
0.000131000 seconds user
0.001063000 seconds sys
Below is snippet of the warning in dmesg:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2869, name: perf-exec
preempt_count: 2, expected: 0
4 locks held by perf-exec/2869:
#0: c00000004325c540 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: bprm_execve+0x64/0xa90
#1: c00000004325c5d8 (&sig->exec_update_lock){++++}-{3:3}, at: begin_new_exec+0x460/0xef0
#2: c0000003fa99d4e0 (&cpuctx_lock){-...}-{2:2}, at: perf_event_exec+0x290/0x510
#3: c000000017ab8418 (&ctx->lock){....}-{2:2}, at: perf_event_exec+0x29c/0x510
irq event stamp: 4806
hardirqs last enabled at (4805): [<c000000000f65b94>] _raw_spin_unlock_irqrestore+0x94/0xd0
hardirqs last disabled at (4806): [<c0000000003fae44>] perf_event_exec+0x394/0x510
softirqs last enabled at (0): [<c00000000013c404>] copy_process+0xc34/0x1ff0
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 36 PID: 2869 Comm: perf-exec Not tainted 6.2.0-rc2-00011-g1247637727f2 #61
Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
Call Trace:
dump_stack_lvl+0x98/0xe0 (unreliable)
__might_resched+0x2f8/0x310
__mutex_lock+0x6c/0x13f0
thread_imc_event_add+0xf4/0x1b0
event_sched_in+0xe0/0x210
merge_sched_in+0x1f0/0x600
visit_groups_merge.isra.92.constprop.166+0x2bc/0x6c0
ctx_flexible_sched_in+0xcc/0x140
ctx_sched_in+0x20c/0x2a0
ctx_resched+0x104/0x1c0
perf_event_exec+0x340/0x510
begin_new_exec+0x730/0xef0
load_elf_binary+0x3f8/0x1e10
...
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<00000000fd63e7cf>] do_nanosleep+0x60/0x1a0
WARNING: CPU: 36 PID: 2869 at kernel/sched/core.c:9912 __might_sleep+0x9c/0xb0
CPU: 36 PID: 2869 Comm: sleep Tainted: G W 6.2.0-rc2-00011-g1247637727f2 #61
Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
NIP: c000000000194a1c LR: c000000000194a18 CTR: c000000000a78670
REGS: c00000004d2134e0 TRAP: 0700 Tainted: G W (6.2.0-rc2-00011-g1247637727f2)
MSR: 9000000000021033 <SF,HV,ME,IR,DR,RI,LE> CR: 48002824 XER: 00000000
CFAR: c00000000013fb64 IRQMASK: 1
The above warning triggered because the current imc-pmu code uses mutex
lock in interrupt disabled sections. The function mutex_lock()
internally calls __might_resched(), which will check if IRQs are
disabled and in case IRQs are disabled, it will trigger the warning.
Fix the issue by changing the mutex lock to spinlock.
[mpe: Fix comments, trim oops in change log, add reported-by tags] |
| FRRouting/frr from v4.0 through v10.4.1 was discovered to contain a NULL pointer dereference via the show_vty_ext_pref_pref_sid function at ospf_ext.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted LSA Update packet. |
| The WPC Name Your Price for WooCommerce plugin for WordPress is vulnerable to unauthorized price alteration in all versions up to, and including, 2.1.9. This is due to the plugin not disabling the ability to name a custom price when it has been specifically disabled for a product. This makes it possible for unauthenticated attackers to purchase products at prices less than they should be able to. |
| The ERI File Library plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the 'erifl_file' AJAX action in all versions up to, and including, 1.1.0. This makes it possible for unauthenticated attackers to download files restricted to specific user roles. |
| Improper validation of some components used by the rollback mechanism in Trend Micro Apex One and Trend Micro Apex One as a Service clients could allow a Apex One server administrator to instruct affected clients to download an unverified rollback package, which could lead to remote code execution. Please note: an attacker must first obtain Apex One server administration console access in order to exploit this vulnerability. |
| A reflected cross-site scripting (XSS) vulnerability in the /public/launchNewWindow.jsp component of Zimbra Collaboration (aka ZCS) 9.0 allows unauthenticated attackers to execute arbitrary web script or HTML via request parameters. |
| Zimbra Collaboration (aka ZCS) 8.8.15 and 9.0 allows an unauthenticated attacker to inject arbitrary memcache commands into a targeted instance. These memcache commands becomes unescaped, causing an overwrite of arbitrary cached entries. |
| Zimbra Collaboration (aka ZCS) 8.8.15 and 9.0 has mboximport functionality that receives a ZIP archive and extracts files from it. An authenticated user with administrator rights has the ability to upload arbitrary files to the system, leading to directory traversal. |
| An arbitrary file upload vulnerability in Trend Micro Apex Central could allow an unauthenticated remote attacker to upload an arbitrary file which could lead to remote code execution. |
| The Restaurant Brands International (RBI) assistant platform through 2025-09-06 does not implement access control for the bathroom rating interface. |
| The Restaurant Brands International (RBI) assistant platform through 2025-09-06 has an "Anyone Can Join This Party" signup API that does not verify user account creation, allowing a remote unauthenticated attacker to create a user account. |
| The Restaurant Brands International (RBI) assistant platform through 2025-09-06 provides the functionality of returning a JWT that can be used to call an API to return a signed AWS upload URL, for any store's path. |
| The Restaurant Brands International (RBI) assistant platform through 2025-09-06 allows remote attackers to adjust Drive Thru speaker audio volume. |
| The Restaurant Brands International (RBI) assistant platform through 2025-09-06 relies on client-side authentication for use of the diagnostic screen. |
