| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: fix reference counting for struct tpm_chip
The following sequence of operations results in a refcount warning:
1. Open device /dev/tpmrm.
2. Remove module tpm_tis_spi.
3. Write a TPM command to the file descriptor opened at step 1.
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1161 at lib/refcount.c:25 kobject_get+0xa0/0xa4
refcount_t: addition on 0; use-after-free.
Modules linked in: tpm_tis_spi tpm_tis_core tpm mdio_bcm_unimac brcmfmac
sha256_generic libsha256 sha256_arm hci_uart btbcm bluetooth cfg80211 vc4
brcmutil ecdh_generic ecc snd_soc_core crc32_arm_ce libaes
raspberrypi_hwmon ac97_bus snd_pcm_dmaengine bcm2711_thermal snd_pcm
snd_timer genet snd phy_generic soundcore [last unloaded: spi_bcm2835]
CPU: 3 PID: 1161 Comm: hold_open Not tainted 5.10.0ls-main-dirty #2
Hardware name: BCM2711
[<c0410c3c>] (unwind_backtrace) from [<c040b580>] (show_stack+0x10/0x14)
[<c040b580>] (show_stack) from [<c1092174>] (dump_stack+0xc4/0xd8)
[<c1092174>] (dump_stack) from [<c0445a30>] (__warn+0x104/0x108)
[<c0445a30>] (__warn) from [<c0445aa8>] (warn_slowpath_fmt+0x74/0xb8)
[<c0445aa8>] (warn_slowpath_fmt) from [<c08435d0>] (kobject_get+0xa0/0xa4)
[<c08435d0>] (kobject_get) from [<bf0a715c>] (tpm_try_get_ops+0x14/0x54 [tpm])
[<bf0a715c>] (tpm_try_get_ops [tpm]) from [<bf0a7d6c>] (tpm_common_write+0x38/0x60 [tpm])
[<bf0a7d6c>] (tpm_common_write [tpm]) from [<c05a7ac0>] (vfs_write+0xc4/0x3c0)
[<c05a7ac0>] (vfs_write) from [<c05a7ee4>] (ksys_write+0x58/0xcc)
[<c05a7ee4>] (ksys_write) from [<c04001a0>] (ret_fast_syscall+0x0/0x4c)
Exception stack(0xc226bfa8 to 0xc226bff0)
bfa0: 00000000 000105b4 00000003 beafe664 00000014 00000000
bfc0: 00000000 000105b4 000103f8 00000004 00000000 00000000 b6f9c000 beafe684
bfe0: 0000006c beafe648 0001056c b6eb6944
---[ end trace d4b8409def9b8b1f ]---
The reason for this warning is the attempt to get the chip->dev reference
in tpm_common_write() although the reference counter is already zero.
Since commit 8979b02aaf1d ("tpm: Fix reference count to main device") the
extra reference used to prevent a premature zero counter is never taken,
because the required TPM_CHIP_FLAG_TPM2 flag is never set.
Fix this by moving the TPM 2 character device handling from
tpm_chip_alloc() to tpm_add_char_device() which is called at a later point
in time when the flag has been set in case of TPM2.
Commit fdc915f7f719 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
already introduced function tpm_devs_release() to release the extra
reference but did not implement the required put on chip->devs that results
in the call of this function.
Fix this by putting chip->devs in tpm_chip_unregister().
Finally move the new implementation for the TPM 2 handling into a new
function to avoid multiple checks for the TPM_CHIP_FLAG_TPM2 flag in the
good case and error cases. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: Ignore multiple conn complete events
When one of the three connection complete events is received multiple
times for the same handle, the device is registered multiple times which
leads to memory corruptions. Therefore, consequent events for a single
connection are ignored.
The conn->state can hold different values, therefore HCI_CONN_HANDLE_UNSET
is introduced to identify new connections. To make sure the events do not
contain this or another invalid handle HCI_CONN_HANDLE_MAX and checks
are introduced.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=215497 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix use after free in hci_send_acl
This fixes the following trace caused by receiving
HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without
first checking if conn->type is in fact AMP_LINK and in case it is
do properly cleanup upper layers with hci_disconn_cfm:
==================================================================
BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50
Read of size 8 at addr ffff88800e404818 by task bluetoothd/142
CPU: 0 PID: 142 Comm: bluetoothd Not tainted
5.17.0-rc5-00006-gda4022eeac1a #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x1f/0x150
kasan_report.cold+0x7f/0x11b
hci_send_acl+0xaba/0xc50
l2cap_do_send+0x23f/0x3d0
l2cap_chan_send+0xc06/0x2cc0
l2cap_sock_sendmsg+0x201/0x2b0
sock_sendmsg+0xdc/0x110
sock_write_iter+0x20f/0x370
do_iter_readv_writev+0x343/0x690
do_iter_write+0x132/0x640
vfs_writev+0x198/0x570
do_writev+0x202/0x280
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RSP: 002b:00007ffce8a099b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3
0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 14 00 00 00 0f 05
<48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RDX: 0000000000000001 RSI: 00007ffce8a099e0 RDI: 0000000000000015
RAX: ffffffffffffffda RBX: 00007ffce8a099e0 RCX: 00007f788fc3cf77
R10: 00007ffce8af7080 R11: 0000000000000246 R12: 000055e4ccf75580
RBP: 0000000000000015 R08: 0000000000000002 R09: 0000000000000001
</TASK>
R13: 000055e4ccf754a0 R14: 000055e4ccf75cd0 R15: 000055e4ccf4a6b0
Allocated by task 45:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x81/0xa0
hci_chan_create+0x9a/0x2f0
l2cap_conn_add.part.0+0x1a/0xdc0
l2cap_connect_cfm+0x236/0x1000
le_conn_complete_evt+0x15a7/0x1db0
hci_le_conn_complete_evt+0x226/0x2c0
hci_le_meta_evt+0x247/0x450
hci_event_packet+0x61b/0xe90
hci_rx_work+0x4d5/0xc50
process_one_work+0x8fb/0x15a0
worker_thread+0x576/0x1240
kthread+0x29d/0x340
ret_from_fork+0x1f/0x30
Freed by task 45:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0xfb/0x130
kfree+0xac/0x350
hci_conn_cleanup+0x101/0x6a0
hci_conn_del+0x27e/0x6c0
hci_disconn_phylink_complete_evt+0xe0/0x120
hci_event_packet+0x812/0xe90
hci_rx_work+0x4d5/0xc50
process_one_work+0x8fb/0x15a0
worker_thread+0x576/0x1240
kthread+0x29d/0x340
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff88800c0f0500
The buggy address is located 24 bytes inside of
which belongs to the cache kmalloc-128 of size 128
The buggy address belongs to the page:
128-byte region [ffff88800c0f0500, ffff88800c0f0580)
flags: 0x100000000000200(slab|node=0|zone=1)
page:00000000fe45cd86 refcount:1 mapcount:0
mapping:0000000000000000 index:0x0 pfn:0xc0f0
raw: 0000000000000000 0000000080100010 00000001ffffffff
0000000000000000
raw: 0100000000000200 ffffea00003a2c80 dead000000000004
ffff8880078418c0
page dumped because: kasan: bad access detected
ffff88800c0f0400: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc
Memory state around the buggy address:
>ffff88800c0f0500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88800c0f0480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88800c0f0580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on
default RX FIFO depth, e.g. 16. Later during serial startup the
qcom_geni_serial_port_setup() updates the RX FIFO depth
(port->rx_fifo_depth) to match real device capabilities, e.g. to 32.
The RX UART handle code will read "port->rx_fifo_depth" number of words
into "port->rx_fifo" buffer, thus exceeding the bounds. This can be
observed in certain configurations with Qualcomm Bluetooth HCI UART
device and KASAN:
Bluetooth: hci0: QCA Product ID :0x00000010
Bluetooth: hci0: QCA SOC Version :0x400a0200
Bluetooth: hci0: QCA ROM Version :0x00000200
Bluetooth: hci0: QCA Patch Version:0x00000d2b
Bluetooth: hci0: QCA controller version 0x02000200
Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv
bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2
Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2)
Bluetooth: hci0: QCA Failed to download patch (-2)
==================================================================
BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c
Write of size 4 at addr ffff279347d578c0 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0
show_stack+0x18/0x40
dump_stack_lvl+0x8c/0xb8
print_report+0x188/0x488
kasan_report+0xb4/0x100
__asan_store4+0x80/0xa4
handle_rx_uart+0xa8/0x18c
qcom_geni_serial_handle_rx+0x84/0x9c
qcom_geni_serial_isr+0x24c/0x760
__handle_irq_event_percpu+0x108/0x500
handle_irq_event+0x6c/0x110
handle_fasteoi_irq+0x138/0x2cc
generic_handle_domain_irq+0x48/0x64
If the RX FIFO depth changes after probe, be sure to resize the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdev
struct rpmsg_ctrldev contains a struct cdev. The current code frees
the rpmsg_ctrldev struct in rpmsg_ctrldev_release_device(), but the
cdev is a managed object, therefore its release is not predictable
and the rpmsg_ctrldev could be freed before the cdev is entirely
released, as in the backtrace below.
[ 93.625603] ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x7c
[ 93.636115] WARNING: CPU: 0 PID: 12 at lib/debugobjects.c:488 debug_print_object+0x13c/0x1b0
[ 93.644799] Modules linked in: veth xt_cgroup xt_MASQUERADE rfcomm algif_hash algif_skcipher af_alg uinput ip6table_nat fuse uvcvideo videobuf2_vmalloc venus_enc venus_dec videobuf2_dma_contig hci_uart btandroid btqca snd_soc_rt5682_i2c bluetooth qcom_spmi_temp_alarm snd_soc_rt5682v
[ 93.715175] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G B 5.4.163-lockdep #26
[ 93.723855] Hardware name: Google Lazor (rev3 - 8) with LTE (DT)
[ 93.730055] Workqueue: events kobject_delayed_cleanup
[ 93.735271] pstate: 60c00009 (nZCv daif +PAN +UAO)
[ 93.740216] pc : debug_print_object+0x13c/0x1b0
[ 93.744890] lr : debug_print_object+0x13c/0x1b0
[ 93.749555] sp : ffffffacf5bc7940
[ 93.752978] x29: ffffffacf5bc7940 x28: dfffffd000000000
[ 93.758448] x27: ffffffacdb11a800 x26: dfffffd000000000
[ 93.763916] x25: ffffffd0734f856c x24: dfffffd000000000
[ 93.769389] x23: 0000000000000000 x22: ffffffd0733c35b0
[ 93.774860] x21: ffffffd0751994a0 x20: ffffffd075ec27c0
[ 93.780338] x19: ffffffd075199100 x18: 00000000000276e0
[ 93.785814] x17: 0000000000000000 x16: dfffffd000000000
[ 93.791291] x15: ffffffffffffffff x14: 6e6968207473696c
[ 93.796768] x13: 0000000000000000 x12: ffffffd075e2b000
[ 93.802244] x11: 0000000000000001 x10: 0000000000000000
[ 93.807723] x9 : d13400dff1921900 x8 : d13400dff1921900
[ 93.813200] x7 : 0000000000000000 x6 : 0000000000000000
[ 93.818676] x5 : 0000000000000080 x4 : 0000000000000000
[ 93.824152] x3 : ffffffd0732a0fa4 x2 : 0000000000000001
[ 93.829628] x1 : ffffffacf5bc7580 x0 : 0000000000000061
[ 93.835104] Call trace:
[ 93.837644] debug_print_object+0x13c/0x1b0
[ 93.841963] __debug_check_no_obj_freed+0x25c/0x3c0
[ 93.846987] debug_check_no_obj_freed+0x18/0x20
[ 93.851669] slab_free_freelist_hook+0xbc/0x1e4
[ 93.856346] kfree+0xfc/0x2f4
[ 93.859416] rpmsg_ctrldev_release_device+0x78/0xb8
[ 93.864445] device_release+0x84/0x168
[ 93.868310] kobject_cleanup+0x12c/0x298
[ 93.872356] kobject_delayed_cleanup+0x10/0x18
[ 93.876948] process_one_work+0x578/0x92c
[ 93.881086] worker_thread+0x804/0xcf8
[ 93.884963] kthread+0x2a8/0x314
[ 93.888303] ret_from_fork+0x10/0x18
The cdev_device_add/del() API was created to address this issue (see
commit '233ed09d7fda ("chardev: add helper function to register char
devs with a struct device")'), use it instead of cdev add/del(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: refactor malicious adv data check
Check for out-of-bound read was being performed at the end of while
num_reports loop, and would fill journal with false positives. Added
check to beginning of loop processing so that it doesn't get checked
after ptr has been advanced. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.
ffs_data_clear is indirectly called from both ffs_fs_kill_sb and
ffs_ep0_release, so it ends up being called twice when userland closes ep0
and then unmounts f_fs.
If userland provided an eventfd along with function's USB descriptors, it
ends up calling eventfd_ctx_put as many times, causing a refcount
underflow.
NULL-ify ffs_eventfd to prevent these extraneous eventfd_ctx_put calls.
Also, set epfiles to NULL right after de-allocating it, for readability.
For completeness, ffs_data_clear actually ends up being called thrice, the
last call being before the whole ffs structure gets freed, so when this
specific sequence happens there is a second underflow happening (but not
being reported):
/sys/kernel/debug/tracing# modprobe usb_f_fs
/sys/kernel/debug/tracing# echo ffs_data_clear > set_ftrace_filter
/sys/kernel/debug/tracing# echo function > current_tracer
/sys/kernel/debug/tracing# echo 1 > tracing_on
(setup gadget, run and kill function userland process, teardown gadget)
/sys/kernel/debug/tracing# echo 0 > tracing_on
/sys/kernel/debug/tracing# cat trace
smartcard-openp-436 [000] ..... 1946.208786: ffs_data_clear <-ffs_data_closed
smartcard-openp-431 [000] ..... 1946.279147: ffs_data_clear <-ffs_data_closed
smartcard-openp-431 [000] .n... 1946.905512: ffs_data_clear <-ffs_data_put
Warning output corresponding to above trace:
[ 1946.284139] WARNING: CPU: 0 PID: 431 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15c
[ 1946.293094] refcount_t: underflow; use-after-free.
[ 1946.298164] Modules linked in: usb_f_ncm(E) u_ether(E) usb_f_fs(E) hci_uart(E) btqca(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) videobuf2_vmalloc(E) videobuf2_memops(E) sha512_generic(E) videobuf2_v4l2(E) sha512_arm(E) videobuf2_common(E) videodev(E) cpufreq_dt(E) snd_bcm2835(CE) brcmfmac(E) mc(E) vc4(E) ctr(E) brcmutil(E) snd_soc_core(E) snd_pcm_dmaengine(E) drbg(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) drm_kms_helper(E) cec(E) ansi_cprng(E) rc_core(E) syscopyarea(E) raspberrypi_cpufreq(E) sysfillrect(E) sysimgblt(E) cfg80211(E) max17040_battery(OE) raspberrypi_hwmon(E) fb_sys_fops(E) regmap_i2c(E) ecdh_generic(E) rfkill(E) ecc(E) bcm2835_rng(E) rng_core(E) vchiq(CE) leds_gpio(E) libcomposite(E) fuse(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) sdhci_iproc(E) sdhci_pltfm(E) sdhci(E)
[ 1946.399633] CPU: 0 PID: 431 Comm: smartcard-openp Tainted: G C OE 5.15.0-1-rpi #1 Debian 5.15.3-1
[ 1946.417950] Hardware name: BCM2835
[ 1946.425442] Backtrace:
[ 1946.432048] [<c08d60a0>] (dump_backtrace) from [<c08d62ec>] (show_stack+0x20/0x24)
[ 1946.448226] r7:00000009 r6:0000001c r5:c04a948c r4:c0a64e2c
[ 1946.458412] [<c08d62cc>] (show_stack) from [<c08d9ae0>] (dump_stack+0x28/0x30)
[ 1946.470380] [<c08d9ab8>] (dump_stack) from [<c0123500>] (__warn+0xe8/0x154)
[ 1946.482067] r5:c04a948c r4:c0a71dc8
[ 1946.490184] [<c0123418>] (__warn) from [<c08d6948>] (warn_slowpath_fmt+0xa0/0xe4)
[ 1946.506758] r7:00000009 r6:0000001c r5:c0a71dc8 r4:c0a71e04
[ 1946.517070] [<c08d68ac>] (warn_slowpath_fmt) from [<c04a948c>] (refcount_warn_saturate+0x110/0x15c)
[ 1946.535309] r8:c0100224 r7:c0dfcb84 r6:ffffffff r5:c3b84c00 r4:c24a17c0
[ 1946.546708] [<c04a937c>] (refcount_warn_saturate) from [<c0380134>] (eventfd_ctx_put+0x48/0x74)
[ 1946.564476] [<c03800ec>] (eventfd_ctx_put) from [<bf5464e8>] (ffs_data_clear+0xd0/0x118 [usb_f_fs])
[ 1946.582664] r5:c3b84c00 r4:c2695b00
[ 1946.590668] [<bf546418>] (ffs_data_clear [usb_f_fs]) from [<bf547cc0>] (ffs_data_closed+0x9c/0x150 [usb_f_fs])
[ 1946.609608] r5:bf54d014 r4:c2695b00
[ 1946.617522] [<bf547c24>] (ffs_data_closed [usb_f_fs]) from [<bf547da0>] (ffs_fs_kill_sb+0x2c/0x30 [usb_f_fs])
[ 1946.636217] r7:c0dfcb
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtksdio: fix infinite loop in btmtksdio_txrx_work()
Every once in a while we see a hung btmtksdio_flush() task:
INFO: task kworker/u17:0:189 blocked for more than 122 seconds.
__cancel_work_timer+0x3f4/0x460
cancel_work_sync+0x1c/0x2c
btmtksdio_flush+0x2c/0x40
hci_dev_open_sync+0x10c4/0x2190
[..]
It all boils down to incorrect time_is_before_jiffies() usage in
btmtksdio_txrx_work(). The btmtksdio_txrx_work() loop is expected
to be terminated if running for longer than 5*HZ. However the
timeout check is twisted: time_is_before_jiffies(old_jiffies + 5*HZ)
evaluates to true when old_jiffies + 5*HZ is in the past i.e. when a
timeout has occurred. Using OR with time_is_before_jiffies(txrx_timeout)
means that:
- before the 5-second timeout: the condition is `int_status || false`,
so it loops as long as there are pending interrupts.
- after the 5-second timeout: the condition becomes `int_status || true`,
which is always true.
When the loop becomes infinite btmtksdio_txrx_work() loop never
terminates and never releases the SDIO host.
Fix loop termination condition to actually enforce a 5*HZ timeout. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: fix use-after-free on marvell probe failure
Make sure to stop any TX URBs submitted during Marvell OOB wakeup
configuration on later probe failures to avoid use-after-free in the
completion callback.
This issue was reported by Sashiko while reviewing a fix for a wakeup
source leak in the btusb probe errors paths. |
| Zephyr's Bluetooth host declares a GATT characteristic as two consecutive attributes: a Characteristic Declaration whose permission is hard-coded to BT_GATT_PERM_READ, and a Characteristic Value attribute that carries the application-specified security permissions (e.g. BT_GATT_PERM_READ_ENCRYPT / READ_AUTHEN / READ_LESC). The public notify and indicate APIs explicitly accept either attribute, and passing the declaration is the documented, common idiom. Before sending each notification or indication, the host re-checks link security with bt_gatt_check_perm() against params->attr in gatt_notify(), gatt_indicate(), and gatt_notify_multiple_verify_params() (subsys/bluetooth/host/gatt.c).
When the application passed the Characteristic Declaration attribute, the host correctly redirected the value handle but left params->attr pointing at the declaration, so the security check evaluated the declaration's permissions (no security required) instead of the value's. As a result the encryption/authentication/LESC requirement configured on the characteristic value was skipped. The Notify-Multiple path additionally used a mask that omitted the LE Secure Connections requirement.
A remote peer triggers the disclosure by connecting (optionally without pairing or encryption) and writing the Client Characteristic Configuration descriptor to enable notifications or indications, causing the server to emit the protected value over a link that has not reached the required security level. The impact is information disclosure / access-control bypass for characteristic values the application intended to expose only over a secured link; exposure depends on the application declaring encrypt/authen-required notify/indicate characteristics and on the CCC being writable at a lower security tier. There is no memory-safety or availability impact.
The fix adds bt_gatt_attr_resolve_value(), which maps a declaration attribute to the following value attribute before the permission check, and switches the Notify-Multiple path to the full BT_GATT_PERM_READ_ENCRYPT_MASK so the LESC requirement is also enforced. |
| Zephyr's Bluetooth Mesh subnet key management leaks one PSA Crypto key slot on every subnet-key teardown. In subsys/bluetooth/mesh/subnet.c, net_keys_create() imports the Private Beacon Key into a PSA key slot under CONFIG_BT_MESH_PRIV_BEACONS (enabled by default), but subnet_keys_destroy() guarded the matching psa_destroy_key() with CONFIG_BT_MESH_V1d1. That Kconfig symbol was removed when explicit Mesh 1.0.1 support was dropped, so the destroy branch became permanently dead code and the import is never balanced by a destroy.
The imbalanced teardown is reached every time subnet keys are destroyed: deleting a subnet (Config Server NetKey Delete), completing a Key Refresh Procedure (which retires the old key set), and resetting/re-provisioning the node. The over-the-air triggers are processed only under the node's device key, so they are exercisable by the provisioner or network administrator that owns the node, reachable over the Bluetooth Mesh network.
With the default CONFIG_MBEDTLS_PSA_KEY_SLOT_COUNT of 16, repeated add/delete or key-refresh cycles exhaust the shared PSA key-slot pool after roughly a dozen rounds. Once exhausted, bt_mesh_private_beacon_key() and thus subnet creation fail: the node can no longer add subnets or complete key refresh, and other PSA crypto consumers on the device may be starved, until the device is rebooted. The fix aligns the destroy guard with the import guard (CONFIG_BT_MESH_PRIV_BEACONS) so each slot is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Fix memory leak in hci_le_big_terminate()
hci_le_big_terminate() allocates iso_list_data via kzalloc_obj but
returns 0 without freeing it when neither pa_sync_term nor big_sync_term
flags are set after evaluating the PA and BIG sync connection state.
This early-return path was introduced when hci_le_big_terminate() was
refactored to take struct hci_conn instead of raw u8 parameters, adding
PA/BIG flag evaluation logic. The existing kfree() on hci_cmd_sync_queue
failure does not cover this path. |
| Use after free in Bluetooth in Google Chrome on Mac prior to 150.0.7871.47 allowed an attacker who convinced a user to install a malicious extension to execute arbitrary code via a crafted Chrome Extension. (Chromium security severity: Low) |
| EQ-3 Eqiva CC-RT-BLE Bluetooth Smart Radiator Thermostat Firmware up to the latest version 1.46 was discovered to allow unsecured bluetooth connections. This vulnerability allows attackers to gain full access to the device without authentication. |
| Use after free in Bluetooth in Google Chrome on Mac prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient policy enforcement in Bluetooth in Google Chrome prior to 150.0.7871.47 allowed a remote attacker to perform privilege escalation via a crafted HTML page. (Chromium security severity: Medium) |
| ** DUPLICATE ** This CVE Record has been rejected by the Zephyr Project CNA. CVE-2026-10772 was assigned to a vulnerability already covered by CVE-2026-2411, which was assigned earlier for the same defect: the Bluetooth GATT notify/indicate paths check the permissions of the Characteristic Declaration attribute rather than the Characteristic Value attribute, so the encryption/authentication requirements configured on the value are not enforced. Both identifiers describe the same root cause in subsys/bluetooth/host/gatt.c, fixed by the same commit (c3386f92fe81bd10dc23e6a115e6a80a7d863546). Use CVE-2026-2411 instead. |
| Permission control vulnerability in the Bluetooth module. Impact: Successful exploitation of this vulnerability may affect availability. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: fix use-after-free on registration failure
Make sure to release the sibling interfaces in case controller
registration fails to avoid use-after-free and double-free when they are
eventually disconnected.
This issue was reported by Sashiko while reviewing a fix for a wakeup
source leak in the btusb probe errors paths. |
| The Zephyr Bluetooth GATT client CCC-write response handler gatt_write_ccc_rsp() in subsys/bluetooth/host/gatt.c invoked the application's params->subscribe() callback after it had already called params->notify(conn, params, NULL, 0).
Per the public GATT API, a notify callback with NULL data is the documented signal that the subscription has terminated and the bt_gatt_subscribe_params struct may be freed or reused by the application; calling subscribe() on the struct afterwards is a use-after-free, including an indirect call through the freed params->subscribe function pointer.
The error branch is remotely (adjacent) reachable: a Zephyr device acting as a GATT client that calls bt_gatt_subscribe() can be driven into this ordering when a connected GATT server peer answers the CCC write with an ATT Error Response (the peer-supplied error code flows through att_error_rsp -> att_handle_rsp into gatt_write_ccc_rsp).
For applications that free or recycle subscription parameters in their notification-termination handler, this results in memory corruption, a crash (denial of service), or potentially attacker-influenced control flow. The fix reorders the handler so the subscribe() callback runs before the terminating notify(NULL) in both the error and unsubscribe paths. |
