| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix node corruption in ar->arvifs list
In current WLAN recovery code flow, ath11k_core_halt() only
reinitializes the "arvifs" list head. This will cause the
list node immediately following the list head to become an
invalid list node. Because the prev of that node still points
to the list head "arvifs", but the next of the list head "arvifs"
no longer points to that list node.
When a WLAN recovery occurs during the execution of a vif
removal, and it happens before the spin_lock_bh(&ar->data_lock)
in ath11k_mac_op_remove_interface(), list_del() will detect the
previously mentioned situation, thereby triggering a kernel panic.
The fix is to remove and reinitialize all vif list nodes from the
list head "arvifs" during WLAN halt. The reinitialization is to make
the list nodes valid, ensuring that the list_del() in
ath11k_mac_op_remove_interface() can execute normally.
Call trace:
__list_del_entry_valid_or_report+0xb8/0xd0
ath11k_mac_op_remove_interface+0xb0/0x27c [ath11k]
drv_remove_interface+0x48/0x194 [mac80211]
ieee80211_do_stop+0x6e0/0x844 [mac80211]
ieee80211_stop+0x44/0x17c [mac80211]
__dev_close_many+0xac/0x150
__dev_change_flags+0x194/0x234
dev_change_flags+0x24/0x6c
devinet_ioctl+0x3a0/0x670
inet_ioctl+0x200/0x248
sock_do_ioctl+0x60/0x118
sock_ioctl+0x274/0x35c
__arm64_sys_ioctl+0xac/0xf0
invoke_syscall+0x48/0x114
...
Tested-on: QCA6698AQ hw2.1 PCI WLAN.HSP.1.1-04591-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: atm: fix /proc/net/atm/lec handling
/proc/net/atm/lec must ensure safety against dev_lec[] changes.
It appears it had dev_put() calls without prior dev_hold(),
leading to imbalance and UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity()
which causes the code to proceed with NULL clock pointers. The current
logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both
valid pointers and NULL, leading to potential NULL pointer dereference
in clk_get_rate().
Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns:
"The error code within @ptr if it is an error pointer; 0 otherwise."
This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL
pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed)
when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be
called when of_clk_get() returns NULL.
Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid
pointers, preventing potential NULL pointer dereference in clk_get_rate(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: Do not kfree() devres managed rdev
Since the allocation of the drivers main structure was changed to
devm_drm_dev_alloc() rdev is managed by devres and we shouldn't be calling
kfree() on it.
This fixes things exploding if the driver probe fails and devres cleans up
the rdev after we already free'd it.
(cherry picked from commit 16c0681617b8a045773d4d87b6140002fa75b03b) |
| In the Linux kernel, the following vulnerability has been resolved:
net: mdio: Check regmap pointer returned by device_node_to_regmap()
The call to device_node_to_regmap() in airoha_mdio_probe() can return
an ERR_PTR() if regmap initialization fails. Currently, the driver
stores the pointer without validation, which could lead to a crash
if it is later dereferenced.
Add an IS_ERR() check and return the corresponding error code to make
the probe path more robust. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix general protection fault in __smc_diag_dump
The syzbot report a crash:
Oops: general protection fault, probably for non-canonical address 0xfbd5a5d5a0000003: 0000 [#1] SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0xdead4ead00000018-0xdead4ead0000001f]
CPU: 1 UID: 0 PID: 6949 Comm: syz.0.335 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:smc_diag_msg_common_fill net/smc/smc_diag.c:44 [inline]
RIP: 0010:__smc_diag_dump.constprop.0+0x3ca/0x2550 net/smc/smc_diag.c:89
Call Trace:
<TASK>
smc_diag_dump_proto+0x26d/0x420 net/smc/smc_diag.c:217
smc_diag_dump+0x27/0x90 net/smc/smc_diag.c:234
netlink_dump+0x539/0xd30 net/netlink/af_netlink.c:2327
__netlink_dump_start+0x6d6/0x990 net/netlink/af_netlink.c:2442
netlink_dump_start include/linux/netlink.h:341 [inline]
smc_diag_handler_dump+0x1f9/0x240 net/smc/smc_diag.c:251
__sock_diag_cmd net/core/sock_diag.c:249 [inline]
sock_diag_rcv_msg+0x438/0x790 net/core/sock_diag.c:285
netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2552
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0x5a7/0x870 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg net/socket.c:729 [inline]
____sys_sendmsg+0xa95/0xc70 net/socket.c:2614
___sys_sendmsg+0x134/0x1d0 net/socket.c:2668
__sys_sendmsg+0x16d/0x220 net/socket.c:2700
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4e0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
The process like this:
(CPU1) | (CPU2)
---------------------------------|-------------------------------
inet_create() |
// init clcsock to NULL |
sk = sk_alloc() |
|
// unexpectedly change clcsock |
inet_init_csk_locks() |
|
// add sk to hash table |
smc_inet_init_sock() |
smc_sk_init() |
smc_hash_sk() |
| // traverse the hash table
| smc_diag_dump_proto
| __smc_diag_dump()
| // visit wrong clcsock
| smc_diag_msg_common_fill()
// alloc clcsock |
smc_create_clcsk |
sock_create_kern |
With CONFIG_DEBUG_LOCK_ALLOC=y, the smc->clcsock is unexpectedly changed
in inet_init_csk_locks(). The INET_PROTOSW_ICSK flag is no need by smc,
just remove it.
After removing the INET_PROTOSW_ICSK flag, this patch alse revert
commit 6fd27ea183c2 ("net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC")
to avoid casting smc_sock to inet_connection_sock. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
The function ring_buffer_map_get_reader() is a bit more strict than the
other get reader functions, and except for certain situations the
rb_get_reader_page() should not return NULL. If it does, it triggers a
warning.
This warning was triggering but after looking at why, it was because
another acceptable situation was happening and it wasn't checked for.
If the reader catches up to the writer and there's still data to be read
on the reader page, then the rb_get_reader_page() will return NULL as
there's no new page to get.
In this situation, the reader page should not be updated and no warning
should trigger. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: avoid infinite loop due to incomplete zstd-compressed data
Currently, the decompression logic incorrectly spins if compressed
data is truncated in crafted (deliberately corrupted) images. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Add missing terminator for zen5_rdseed_microcode
Running x86_match_min_microcode_rev() on a Zen5 CPU trips up KASAN for an out
of bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init
The lock-related debug logic (CONFIG_LOCK_STAT) in the kernel is noting
the following warning when the BlueField-3 SOC is booted:
BUG: key ffff00008a3402a8 has not been registered!
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 4 PID: 592 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x1d4/0x2a0
<snip>
Call trace:
lockdep_init_map_type+0x1d4/0x2a0
__kernfs_create_file+0x84/0x140
sysfs_add_file_mode_ns+0xcc/0x1cc
internal_create_group+0x110/0x3d4
internal_create_groups.part.0+0x54/0xcc
sysfs_create_groups+0x24/0x40
device_add+0x6e8/0x93c
device_register+0x28/0x40
__hwmon_device_register+0x4b0/0x8a0
devm_hwmon_device_register_with_groups+0x7c/0xe0
mlxbf_pmc_probe+0x1e8/0x3e0 [mlxbf_pmc]
platform_probe+0x70/0x110
The mlxbf_pmc driver must call sysfs_attr_init() during the
initialization of the "count_clock" data structure to avoid
this warning. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: Do not dereference NULL pointer in plane reset
The plane state in __drm_gem_reset_shadow_plane() can be NULL. Do not
deref that pointer, but forward NULL to the other plane-reset helpers.
Clears plane->state to NULL.
v2:
- fix typo in commit description (Javier) |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: arm: scmi: Fix genpd leak on provider registration failure
If of_genpd_add_provider_onecell() fails during probe, the previously
created generic power domains are not removed, leading to a memory leak
and potential kernel crash later in genpd_debug_add().
Add proper error handling to unwind the initialized domains before
returning from probe to ensure all resources are correctly released on
failure.
Example crash trace observed without this fix:
| Unable to handle kernel paging request at virtual address fffffffffffffc70
| CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc1 #405 PREEMPT
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform
| pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : genpd_debug_add+0x2c/0x160
| lr : genpd_debug_init+0x74/0x98
| Call trace:
| genpd_debug_add+0x2c/0x160 (P)
| genpd_debug_init+0x74/0x98
| do_one_initcall+0xd0/0x2d8
| do_initcall_level+0xa0/0x140
| do_initcalls+0x60/0xa8
| do_basic_setup+0x28/0x40
| kernel_init_freeable+0xe8/0x170
| kernel_init+0x2c/0x140
| ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL deref in debugfs odm_combine_segments
When a connector is connected but inactive (e.g., disabled by desktop
environments), pipe_ctx->stream_res.tg will be destroyed. Then, reading
odm_combine_segments causes kernel NULL pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 16 UID: 0 PID: 26474 Comm: cat Not tainted 6.17.0+ #2 PREEMPT(lazy) e6a17af9ee6db7c63e9d90dbe5b28ccab67520c6
Hardware name: LENOVO 21Q4/LNVNB161216, BIOS PXCN25WW 03/27/2025
RIP: 0010:odm_combine_segments_show+0x93/0xf0 [amdgpu]
Code: 41 83 b8 b0 00 00 00 01 75 6e 48 98 ba a1 ff ff ff 48 c1 e0 0c 48 8d 8c 07 d8 02 00 00 48 85 c9 74 2d 48 8b bc 07 f0 08 00 00 <48> 8b 07 48 8b 80 08 02 00>
RSP: 0018:ffffd1bf4b953c58 EFLAGS: 00010286
RAX: 0000000000005000 RBX: ffff8e35976b02d0 RCX: ffff8e3aeed052d8
RDX: 00000000ffffffa1 RSI: ffff8e35a3120800 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff8e3580eb0000 R09: ffff8e35976b02d0
R10: ffffd1bf4b953c78 R11: 0000000000000000 R12: ffffd1bf4b953d08
R13: 0000000000040000 R14: 0000000000000001 R15: 0000000000000001
FS: 00007f44d3f9f740(0000) GS:ffff8e3caa47f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000006485c2000 CR4: 0000000000f50ef0
PKRU: 55555554
Call Trace:
<TASK>
seq_read_iter+0x125/0x490
? __alloc_frozen_pages_noprof+0x18f/0x350
seq_read+0x12c/0x170
full_proxy_read+0x51/0x80
vfs_read+0xbc/0x390
? __handle_mm_fault+0xa46/0xef0
? do_syscall_64+0x71/0x900
ksys_read+0x73/0xf0
do_syscall_64+0x71/0x900
? count_memcg_events+0xc2/0x190
? handle_mm_fault+0x1d7/0x2d0
? do_user_addr_fault+0x21a/0x690
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x6c/0x74
RIP: 0033:0x7f44d4031687
Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00>
RSP: 002b:00007ffdb4b5f0b0 EFLAGS: 00000202 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 00007f44d3f9f740 RCX: 00007f44d4031687
RDX: 0000000000040000 RSI: 00007f44d3f5e000 RDI: 0000000000000003
RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007f44d3f5e000
R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000040000
</TASK>
Modules linked in: tls tcp_diag inet_diag xt_mark ccm snd_hrtimer snd_seq_dummy snd_seq_midi snd_seq_oss snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device x>
snd_hda_codec_atihdmi snd_hda_codec_realtek_lib lenovo_wmi_helpers think_lmi snd_hda_codec_generic snd_hda_codec_hdmi snd_soc_core kvm snd_compress uvcvideo sn>
platform_profile joydev amd_pmc mousedev mac_hid sch_fq_codel uinput i2c_dev parport_pc ppdev lp parport nvme_fabrics loop nfnetlink ip_tables x_tables dm_cryp>
CR2: 0000000000000000
---[ end trace 0000000000000000 ]---
RIP: 0010:odm_combine_segments_show+0x93/0xf0 [amdgpu]
Code: 41 83 b8 b0 00 00 00 01 75 6e 48 98 ba a1 ff ff ff 48 c1 e0 0c 48 8d 8c 07 d8 02 00 00 48 85 c9 74 2d 48 8b bc 07 f0 08 00 00 <48> 8b 07 48 8b 80 08 02 00>
RSP: 0018:ffffd1bf4b953c58 EFLAGS: 00010286
RAX: 0000000000005000 RBX: ffff8e35976b02d0 RCX: ffff8e3aeed052d8
RDX: 00000000ffffffa1 RSI: ffff8e35a3120800 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff8e3580eb0000 R09: ffff8e35976b02d0
R10: ffffd1bf4b953c78 R11: 0000000000000000 R12: ffffd1bf4b953d08
R13: 0000000000040000 R14: 0000000000000001 R15: 0000000000000001
FS: 00007f44d3f9f740(0000) GS:ffff8e3caa47f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000006485c2000 CR4: 0000000000f50ef0
PKRU: 55555554
Fix this by checking pipe_ctx->
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: fix invalid pointer access in debugfs
If the memory allocation in gpiolib_seq_start() fails, the s->private
field remains uninitialized and is later dereferenced without checking
in gpiolib_seq_stop(). Initialize s->private to NULL before calling
kzalloc() and check it before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: aspeed - fix double free caused by devm
The clock obtained via devm_clk_get_enabled() is automatically managed
by devres and will be disabled and freed on driver detach. Manually
calling clk_disable_unprepare() in error path and remove function
causes double free.
Remove the manual clock cleanup in both aspeed_acry_probe()'s error
path and aspeed_acry_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
spi: rockchip-sfc: Fix DMA-API usage
Use DMA-API dma_map_single() call for getting the DMA address of the
transfer buffer instead of hacking with virt_to_phys().
This fixes the following DMA-API debug warning:
------------[ cut here ]------------
DMA-API: rockchip-sfc fe300000.spi: device driver tries to sync DMA memory it has not allocated [device address=0x000000000cf70000] [size=288 bytes]
WARNING: kernel/dma/debug.c:1106 at check_sync+0x1d8/0x690, CPU#2: systemd-udevd/151
Modules linked in: ...
Hardware name: Hardkernel ODROID-M1 (DT)
pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : check_sync+0x1d8/0x690
lr : check_sync+0x1d8/0x690
..
Call trace:
check_sync+0x1d8/0x690 (P)
debug_dma_sync_single_for_cpu+0x84/0x8c
__dma_sync_single_for_cpu+0x88/0x234
rockchip_sfc_exec_mem_op+0x4a0/0x798 [spi_rockchip_sfc]
spi_mem_exec_op+0x408/0x498
spi_nor_read_data+0x170/0x184
spi_nor_read_sfdp+0x74/0xe4
spi_nor_parse_sfdp+0x120/0x11f0
spi_nor_sfdp_init_params_deprecated+0x3c/0x8c
spi_nor_scan+0x690/0xf88
spi_nor_probe+0xe4/0x304
spi_mem_probe+0x6c/0xa8
spi_probe+0x94/0xd4
really_probe+0xbc/0x298
... |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix GEM free for imported dma-bufs
Imported dma-bufs also have obj->resv != &obj->_resv. So we should
check both this condition in addition to flags for handling the
_NO_SHARE case.
Fixes this splat that was reported with IRIS video playback:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 2040 at drivers/gpu/drm/msm/msm_gem.c:1127 msm_gem_free_object+0x1f8/0x264 [msm]
CPU: 3 UID: 1000 PID: 2040 Comm: .gnome-shell-wr Not tainted 6.17.0-rc7 #1 PREEMPT
pstate: 81400005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : msm_gem_free_object+0x1f8/0x264 [msm]
lr : msm_gem_free_object+0x138/0x264 [msm]
sp : ffff800092a1bb30
x29: ffff800092a1bb80 x28: ffff800092a1bce8 x27: ffffbc702dbdbe08
x26: 0000000000000008 x25: 0000000000000009 x24: 00000000000000a6
x23: ffff00083c72f850 x22: ffff00083c72f868 x21: ffff00087e69f200
x20: ffff00087e69f330 x19: ffff00084d157ae0 x18: 0000000000000000
x17: 0000000000000000 x16: ffffbc704bd46b80 x15: 0000ffffd0959540
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: ffffbc702e6cdb48 x10: 0000000000000000 x9 : 000000000000003f
x8 : ffff800092a1ba90 x7 : 0000000000000000 x6 : 0000000000000020
x5 : ffffbc704bd46c40 x4 : fffffdffe102cf60 x3 : 0000000000400032
x2 : 0000000000020000 x1 : ffff00087e6978e8 x0 : ffff00087e6977e8
Call trace:
msm_gem_free_object+0x1f8/0x264 [msm] (P)
drm_gem_object_free+0x1c/0x30 [drm]
drm_gem_object_handle_put_unlocked+0x138/0x150 [drm]
drm_gem_object_release_handle+0x5c/0xcc [drm]
drm_gem_handle_delete+0x68/0xbc [drm]
drm_gem_close_ioctl+0x34/0x40 [drm]
drm_ioctl_kernel+0xc0/0x130 [drm]
drm_ioctl+0x360/0x4e0 [drm]
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xec
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
Patchwork: https://patchwork.freedesktop.org/patch/676273/ |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Fix KASAN global-out-of-bounds warning
When running "perf mem record" command on CWF, the below KASAN
global-out-of-bounds warning is seen.
==================================================================
BUG: KASAN: global-out-of-bounds in cmt_latency_data+0x176/0x1b0
Read of size 4 at addr ffffffffb721d000 by task dtlb/9850
Call Trace:
kasan_report+0xb8/0xf0
cmt_latency_data+0x176/0x1b0
setup_arch_pebs_sample_data+0xf49/0x2560
intel_pmu_drain_arch_pebs+0x577/0xb00
handle_pmi_common+0x6c4/0xc80
The issue is caused by below code in __grt_latency_data(). The code
tries to access x86_hybrid_pmu structure which doesn't exist on
non-hybrid platform like CWF.
WARN_ON_ONCE(hybrid_pmu(event->pmu)->pmu_type == hybrid_big)
So add is_hybrid() check before calling this WARN_ON_ONCE to fix the
global-out-of-bounds access issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mlx5: Fix default values in create CQ
Currently, CQs without a completion function are assigned the
mlx5_add_cq_to_tasklet function by default. This is problematic since
only user CQs created through the mlx5_ib driver are intended to use
this function.
Additionally, all CQs that will use doorbells instead of polling for
completions must call mlx5_cq_arm. However, the default CQ creation flow
leaves a valid value in the CQ's arm_db field, allowing FW to send
interrupts to polling-only CQs in certain corner cases.
These two factors would allow a polling-only kernel CQ to be triggered
by an EQ interrupt and call a completion function intended only for user
CQs, causing a null pointer exception.
Some areas in the driver have prevented this issue with one-off fixes
but did not address the root cause.
This patch fixes the described issue by adding defaults to the create CQ
flow. It adds a default dummy completion function to protect against
null pointer exceptions, and it sets an invalid command sequence number
by default in kernel CQs to prevent the FW from sending an interrupt to
the CQ until it is armed. User CQs are responsible for their own
initialization values.
Callers of mlx5_core_create_cq are responsible for changing the
completion function and arming the CQ per their needs. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver
After restructuring and splitting the HDMI codec driver code, each
HDMI codec driver contains the own build_controls and build_pcms ops.
A copy-n-paste error put the wrong entries for nvhdmi-mcp driver; both
build_controls and build_pcms are swapped. Unfortunately both
callbacks have the very same form, and the compiler didn't complain
it, either. This resulted in a NULL dereference because the PCM
instance hasn't been initialized at calling the build_controls
callback.
Fix it by passing the proper entries. |
