| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output()
The snd_usbmidi_us122l_output() picks a count of 2 on anything slower
than high speed and never relates it to ep->max_transfer. The URB
buffer holds exactly max_transfer bytes, so a device declaring a one
byte bulk endpoint takes two bytes from snd_rawmidi_transmit(), and the
memset that pads the rest computes 1 - 2 in int and wraps to SIZE_MAX.
Only 0x800e and 0x800f are pinned to nine bytes. The US-122MKII at
0x0644:0x8021 falls to the default and takes usb_maxpacket(), which the
USB core only clamps downward.
The akai and novation output ops in this file were given the same guard
recently. Do the same here. |
| In the Linux kernel, the following vulnerability has been resolved:
usb-storage: ene_ub6250: fix race between scan work and probe
ene_ub6250_probe() calls usb_stor_probe2(), which starts the usb-storage
infrastructure and schedules the delayed scan work. The driver then
calls ene_get_card_type(), which sends an ENE command through
ene_send_scsi_cmd() and the usb-storage bulk transfer helpers.
Both the delayed scan work, through usb_stor_Bulk_max_lun(), and
ene_get_card_type() use us->current_urb. The scan work serializes this
access with us->dev_mutex, but the ENE card-type probe does not. If the
scan work runs while ene_get_card_type() is still using us->current_urb,
usb_submit_urb() warns that the URB is already active.
Serialize ene_get_card_type() with us->dev_mutex, matching the locking
used by the scan path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: hd3ss3220: track VBUS enable state per consumer
regulator_is_enabled() reports the aggregate regulator state, not
whether this consumer holds an enable reference. If another consumer
enables VBUS first, the driver can skip its own regulator_enable() call
and later attempt to drop a reference it never acquired, triggering an
unbalanced regulator disable warning.
Track successful enable and disable calls locally. Keep the state
unchanged when an operation fails so a later role or ID notification
retries the operation while this consumer keeps balanced references. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers()
Previously fsg_num_buffers_validate() was removed as it was not
necessary due to Kconfig setting the limits for n from 2 to 256 with
default as 2. However, setting the page content in such a way that
kstrtou8() reflects n value as either 0 or 1 bypasses these
restrictions leading to a null pointer dereference if n is 0. Fix
this by adding a check for n < 2 and returning -EINVAL if n is
either 0 or 1 consistent with Kconfig logic. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: fix NULL pointer dereference in gadget_dev_ioctl()
gadget_dev_ioctl() reads dev->gadget before acquiring dev->lock, but
dev->state is checked after acquiring the lock. Therefore a concurrent
bind can change the device state between these operations, which can
leave ioctl with a stale NULL gadget pointer and causing a NULL pointer
dereference at gadget->ops->ioctl.
Read dev->gadget while holding dev->lock so that the gadget pointer
and device state are sampled consistently. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: fix null pointer dereference in usb_put_function_instance()
usb_put_function_instance() attempts to dereference fd inside fi struct
to get mod in uvc_alloc_inst() error path. However, fd is not allocated
until later in try_get_usb_function_instance() after allocating fi in
uvc_alloc_inst() and thus guranteed to be null in error path. Fix this
by adding a null check for fi->fd that returns if fd is null. |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: fix lost bounce buffers on TDs spanning several ring segments
When a TD reaches a link TRB with data that is not aligned to the
endpoint's wMaxPacketSize, xhci_align_td() stages the unalignable tail
through the bounce buffer of the ring segment holding that link TRB.
xhci_unmap_td_bounce_buffer() later unmaps it and, for IN transfers,
copies the data back into the URB's buffer.
The enqueue path records the segment that was bounced in td->bounce_seg,
under the assumption that a TD never spans more than two ring segments.
That assumption does not hold: a TD large enough to span three or more
segments crosses several link TRBs and can be bounced at each of them.
Only the last one survives in td->bounce_seg, so every earlier bounce
buffer is neither copied back nor DMA unmapped.
The URB still completes with actual_length equal to the requested length
and no error, so the transfer looks successful while a wMaxPacketSize
sized hole in the destination buffer silently keeps its previous
contents. It also leaks a DMA mapping per dropped bounce.
Any sufficiently large and fragmented bulk transfer can hit this. It was
found with a USB mass storage device behind xHCI backing a dm-verity
target with 512 byte hash blocks, where the stale data is detected rather
than silently consumed. The device enumerates as SuperSpeed, so
wMaxPacketSize is 1024, while dm-bufio issues one 512 byte bio per hash
block. verity_prefetch_io() makes the block layer merge hundreds of them
into a single request of up to 512 scatterlist entries of 512 bytes each.
At 256 TRBs per ring segment such a TD spans three segments, and every
segment boundary falls on an odd multiple of 512, i.e. unaligned to
wMaxPacketSize. dm-bufio then caches a hash block holding stale data and
dm-verity declares the metadata block corrupted:
device-mapper: verity: 8:2: metadata block 10850 is corrupted
A reproducer running this under qemu is available at
https://github.com/baloo/xhci-verity
The bounce state (bounce_buf, bounce_dma, bounce_len, bounce_offs)
already lives on the ring segment, so there is nothing extra to track.
Keep recording the last bounced segment in td->bounce_seg and, on
completion, walk the segments from td->start_seg up to it, unmapping
every segment that still has a pending bounce.
Stopping at td->bounce_seg rather than td->end_seg matters: a bounce
implies the TD continues past that segment's link TRB, so bounce_seg is
always strictly before end_seg, and a later TD may already have started
in end_seg and been bounced there. Walking that far would copy a foreign
bounce buffer into this URB and unmap it twice. It also keeps the walk
correct if a TD ever wraps the whole ring so that end_seg == start_seg.
[mn: Add ring->num_segs check to prevent unlikely infinite for loop.] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: handle region split failure in apply_min_nr_regions()
damon_apply_min_nr_regions() repeatedly split each region until its size
becomes small enough to meet the user-defined low limit of the number of
regions. The loop assumes the split operation (damon_split_region_at())
will always succeed and create the new region. But the operation could
silently fail for memory allocation failures, for example.
If such failure happens and the region was the last region, the linked
list-based next region fetching returns invalid pointer. As a result,
invalid memory dereference and corruption could happen. Even if the
corner case is handled, it imposes stress to the allocator by trying split
regions for other targets. Fix the issue by breaking all the loops for
any region split failure.
This means there could be a min_nr_regions violation. It will only rarely
happen since the allocation is arguably too small to fail. Even if it
happens, it is only temporal. damon_apply_min_nr_regions() will be called
again after the aggregation interval.
The user impact of the issue should be minor, since the allocation is
arguably too small to fail. But, it could still theoretically happen, and
the consequence is very bad.
This issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Initialize IRQ data before requesting IRQs
dw_edma_irq_request() passes struct dw_edma_irq to request_irq() before
dw_edma_channel_setup() fills the back pointer. A shared interrupt can
therefore enter the handler with dw_irq->dw still NULL, leading to a
NULL pointer dereference.
Set the back pointer before installing each handler. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: Check for ERR_PTR from dentry_path() in validate_hash_algo()
dentry_path() returns ERR_PTR(-ENAMETOOLONG) when the path exceeds the
buffer. validate_hash_algo() passes the result straight to
integrity_audit_msg() without checking. ERR_PTR is not NULL, so
integrity_audit_message() sees a valid pointer and calls strlen() on
it, which faults:
BUG: unable to handle page fault for address: ffffffffffffffdc
RIP: 0010:strlen+0x30/0xa0
Call Trace:
audit_log_untrustedstring+0x19/0x30
integrity_audit_message+0x366/0x4f0
ima_inode_setxattr+0x512/0x5f0
Check for IS_ERR() and use NULL instead, which makes the audit message
skip the name= field instead of crashing. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: transfer the pmd dirty bit to the folio on zap
zap_huge_pmd_folio() propagates the pmd young bit to the folio for the
file case, but not the dirty bit. The pte path does propagate it, in
zap_present_folio_ptes() and so does the pmd split path, in
__split_huge_pmd_locked().
For most file mappings the omission is harmless, because writing to a
shared file mapping goes through page_mkwrite(), which dirties the folio.
tmpfs is different: it has no page_mkwrite(), and vma_wants_writenotify()
is false for it, so a *read* fault on a MAP_SHARED tmpfs mapping installs
a writable pmd via do_read_fault(). do_read_fault() does not call
fault_dirty_shared_page(), so subsequent stores through that mapping set
only the hardware dirty bit in the pmd and never call folio_mark_dirty().
A shmem folio allocated by a fault is marked uptodate but not dirty (see
the clear: block in shmem_get_folio_gfp()), so PG_dirty is never set at
all.
Unmapping such a folio - munmap(), or exit_mmap() when the process dies -
then loses the only record that it was written, because zap_huge_pmd()
drops the pmd without transferring the dirty bit. Reclaim afterwards sees
a clean shmem folio: the whole swap-out block in shrink_folio_list() is
inside "if (folio_test_dirty(folio))", so pageout() is skipped and the
folio falls into __remove_mapping(). There, folio_is_file_lru() is false
for a swapbacked folio, so no shadow entry is created and
__filemap_remove_folio(folio, NULL) simply empties the i_pages slot. The
data is freed without ever being written to swap, and the next fault on
that index returns a freshly zeroed folio.
This is silent data loss for any process that keeps state in a MAP_SHARED
tmpfs segment across an unmap - for example a cache handed from one
process generation to the next through /dev/shm. It requires the folio to
be PMD-mapped, so it only shows up once shmem THP is enabled (which is
what we did in Meta fleet and started noticing crashes); with THP off the
pte path transfers the dirty bit correctly. It also only becomes visible
when swap is enabled, because with no swap device shmem folios (which are
on the anon LRU) are not scanned by reclaim at all, so the clean folio is
never dropped.
Reproduced on x86_64 with a tmpfs mounted huge=within_size: read-fault a
2MB-backed region, write a known pattern through the resulting mapping,
munmap, force reclaim of the cgroup, then re-map and read back. Without
this patch the region reads back as zeros and vmstat shows zswpout 0 - the
data was discarded rather than swapped. With this patch the region reads
back correctly and the pages are swapped out as expected. With
huge=never, or when the first touch is a write, the test passes either
way. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Fix kernel address leakages in LBR stack
Before Arch LBR gained CPL filtering support, a user-only branch stack
could still contain kernel addresses. As a result, kernel branch records
may be exposed to user space even when PERF_SAMPLE_BRANCH_USER is
requested.
For example, on Intel Tiger Lake, the following command can still report
SYSRET/ERET entries with kernel-space from addresses:
$ ./perf record -e cycles:p -o - --branch-filter any,save_type,u -- \
./perf bench syscall basic --loop 1000 | \
./perf script -i - --fields brstack|tr ' ' '\n'| \
grep -E '0x[89a-f][0-9a-f]{15}'
Total time: 0.000 [sec]
0.219000 usecs/op
4,566,210 ops/sec
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.551 MB - ]
0xffffffff93c001c8/0x7f12a2b1d647/P/-/-/16959/SYSRET/-
0xffffffff93c001c8/0x7f12a2b1d5c2/P/-/-/17535/SYSRET/-
0xffffffff93c01928/0x7f12a2861000/P/-/-/6719/ERET/-
0xffffffff93c01928/0x7f12a297a000/P/-/-/8575/ERET/-
The problem is that intel_pmu_lbr_filter() does not fully validate the
privilege level of sampled entries. It filters some mismatches based on
the branch type and the to address, but it does not reject entries whose
from address violates the requested branch privilege filter.
Fix this by extending software filtering to validate both from and to
addresses against br_sel. Any LBR entry contains kernel address does not
match the requested user filter is dropped. This prevents kernel
addresses from appearing in user-only branch stacks. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: mux: Fix channel node leak on adapter add failure
i2c_mux_add_adapter() takes a reference to the Device Tree channel node
before registering the new adapter. If adapter registration fails, the
error path frees the private data without dropping that reference.
Release the channel node before freeing the private data. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: Don't read GMID_EL1 when MTE is disabled
__cpuinfo_store_cpu() gates the GMID_EL1 read on the raw
ID_AA64PFR1_EL1, so it reads the register even when the kernel has
disabled MTE (CONFIG_ARM64_MTE=n or arm64.nomte). KVM sets HCR_EL2.TID5
in that case, and pKVM injects an UNDEF the host cannot handle:
Internal error: Oops - Undefined instruction: 0000000002000000 [#1] SMP
pc : __cpuinfo_store_cpu+0xf4/0x264
Kernel panic - not syncing: Attempted to kill the idle task!
Only pKVM reaches it, and only after a CPU is offlined and brought back
online: its CPU_ON relay sets the host HCR before the CPU enters EL1,
while plain nVHE sets it at CPUHP_AP_KVM_ONLINE.
Gate the read on the CPU's own ID_AA64PFR1_EL1 with the command-line
override applied, and on CONFIG_ARM64_MTE, which no register reflects.
The boot CPU stores its registers before init_cpu_features() strips an
unsafe override, so clamp against the hardware value here too. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: return early from a zero-length flush
SYNC_BO does not constrain its size, so a request for zero bytes reaches
drm_clflush_virt_range(), which ends with an unconditional
clflushopt(end - 1). For an empty range that is the byte before the
mapping, and abo->mem.kva comes from vmap(), so the access lands in the
guard page below the vmalloc area and faults:
BUG: unable to handle page fault for address: ffffd16fbbc70fff
#PF: supervisor read access in kernel mode
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 7 UID: 1000 Comm: sync_bo_probe
RIP: 0010:drm_clflush_virt_range+0x3c/0x70
Call Trace:
amdxdna_drm_sync_bo_ioctl+0x124/0x430 [amdxdna]
drm_ioctl+0x301/0x4c0
__x64_sys_ioctl+0x115/0x2f0
do_syscall_64+0xa6/0x3d0
Any process that can open the render node can do this. Reproduced 3 of 3
times on a Strix Point NPU (1022:17f0), by calling SYNC_BO with size 0 on
an AMDXDNA_BO_SHARE object. The import arm takes the same request but
flushes the whole scatterlist, so it survives it.
Nothing needs flushing for an empty range, so answer before choosing a
path. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: fix job completion fence cleanup
ethosu_ioctl_submit_job() allocates done_fence before validating buffer
handles. Errors after allocation call ethosu_job_err_cleanup(), which frees
the job but leaks the uninitialized fence.
A scheduler dependency error also lets ethosu_job_run() return before
dma_fence_init(). Normal cleanup then passes a zeroed refcount to
dma_fence_put().
Release done_fence in the common cleanup path and use
dma_fence_was_initialized() to distinguish initialized fences from raw
allocations.
[robh: also fix goto] |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fabrics: fix DHCHAP secret leak on parse failure
nvmf_parse_options() duplicates dhchap_secret and dhchap_ctrl_secret
with match_strdup() before validating the DHHC-1: representation.
If validation fails, the parser returns -EINVAL before the temporary
string in p is assigned to opts->dhchap_secret or
opts->dhchap_ctrl_secret. nvmf_create_ctrl() subsequently frees opts,
but nvmf_free_options() cannot release the unassigned temporary string.
Each rejected option therefore leaks one allocation.
This is easy to miss because valid secrets transfer ownership to opts
and are freed normally, while the malformed-secret path still returns
the expected -EINVAL to userspace.
With CONFIG_NVME_HOST_AUTH enabled, the leak is reachable before the
required-option checks and transport lookup. No NVMe-oF target or
working transport connection is required; for example, repeatedly
writing
dhchap_secret=BAD
or
dhchap_ctrl_secret=BAD
to /dev/nvme-fabrics deterministically takes the leaking parse path.
Free the temporary string before leaving both validation error paths.
Use kfree_sensitive() because the copied option may contain secret
material even when its representation is rejected, matching the
sensitive cleanup used for stored DHCHAP secrets. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb_cma: fix null nodemask dereference in hugetlb_cma_alloc_frozen_folio
alloc_buddy_hugetlb_folio_with_mpol() can pass a NULL nodemask to
alloc_fresh_hugetlb_folio() as a fallback to allocate from all nodes. If
order is gigantic, alloc_fresh_hugetlb_folio() propagates the NULL
nodemask down to hugetlb_cma_alloc_frozen_folio() via
alloc_gigantic_frozen_folio().
Additionally, hugetlb_cma_alloc_frozen_folio() previously attempted
allocation on hugetlb_cma[nid] without verifying if nid is included in the
caller's nodemask. Adding a node_isset(nid, *nodemask) check ensures the
initial preferred node allocation honors the memory policy / nodemask.
However, hugetlb_cma_alloc_frozen_folio() dereferences the nodemask in
node_isset(nid, *nodemask) and for_each_node_mask(node, *nodemask),
leading to a null pointer dereference kernel panic when nodemask is NULL.
Fix this by checking if nodemask is NULL in
hugetlb_cma_alloc_frozen_folio() and defaulting it to
cpuset_current_mems_allowed. Enclose the allocation attempts within the
cpuset seqcount retry loop so that if the cpuset changes concurrently
during allocation, the attempts are retried using the updated nodemask.
This ensures that the initial node check and fallback loop safely honor
the task's cpuset without violating cpuset constraints or causing NULL
pointer dereferences or unexpected allocation failures.
From a userspace perspective, this bug allows an unprivileged user to
crash the kernel (trigger a panic) by requesting a gigantic hugepage
allocation with MPOL_PREFERRED_MANY on a system where CMA is only
configured on a subset of NUMA nodes.
This can be reproduced by booting a VM with two NUMA nodes, restricting
CMA to Node 1 (e.g., hugetlb_cma=1:1G default_hugepagesz=1G hugepagesz=1G
hugepages=0), and running a program that allocates a 1GB hugepage area
without reserving, restricts allocation to Node 0 using mbind() with
MPOL_PREFERRED_MANY, and triggers a page fault:
void *ptr = mmap(NULL, 1UL << 30, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB |
MAP_HUGE_1GB | MAP_NORESERVE, -1, 0);
unsigned long nodemask = 1; /* Node 0 */
mbind(ptr, 1UL << 30, MPOL_PREFERRED_MANY, &nodemask,
sizeof(nodemask) * 8, 0);
memset(ptr, 0, 1UL << 30); /* Trigger fault */
This results in a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:hugetlb_cma_alloc_frozen_folio+0x75/0x120
Call Trace:
<TASK>
only_alloc_fresh_hugetlb_folio.isra.0+0x2c/0x160
alloc_surplus_hugetlb_folio+0x6d/0x100
alloc_hugetlb_folio+0x3c5/0x660
hugetlb_no_page+0x3d9/0x650 |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: eisa: Fix infinite loop when parsing invalid IRQ value
When an invalid value is passed via the "eisa_irq_edge=" kernel
command line parameter (e.g. "eisa_irq_edge=16,5"), eisa_irq_setup()
prints an error message and continues without advancing the current
position. As a result the same invalid value is parsed again and
again, causing an infinite loop while the kernel boots.
Advance to the next comma-separated entry, or stop parsing when there
is no next entry, before continuing so that the remaining entries are
processed normally. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/kexec_file: Fix null-ptr-def in extra size calculation
A static Sashiko AI review identified a potential NULL pointer
dereference in kexec_extra_fdt_size_ppc64().
On platforms without any reserved memory regions,
get_reserved_memory_ranges() can return 0 while leaving 'rmem'
unallocated as NULL. Passing it directly leads to a kernel panic when
evaluating 'rmem->nr_ranges'.
Add a NULL check for 'rmem' to prevent this crash. |
