Search vulnerabilities

Results 34,364

CVE-2026-90110

inetpeer: randomize RB-tree node comparison using SipHash

In the Linux kernel, the following vulnerability has been resolved: inetpeer: randomize RB-tree node comparison using SipHash The inetpeer rate limiting system stores peer entries in a Red-Black tree keyed deterministically on the remote IP address. Because tree lookups walk the RB-tree using standard lexicographical comparisons (inetpeer_addr_cmp), an off-path adversary can predict the exact topology of the tree and the sequence of nodes traversed during lookups (the gc_stack candidate list). By combining deterministic tree traversal with aggressive garbage collection (triggered when tree size exceeds inet_peer_threshold), an attacker can selectively force the eviction of targeted inet_peer nodes. When an evicted node is subsequently re-created upon receiving a new packet, its rate-limiting token bucket (rate_tokens, rate_last) is reset to full capacity. This creates a side-channel primitive allowing off-path attackers to bypass IP-keyed ICMP rate limits and infer open UDP ports (similar to SAD DNS style attacks). Mitigate this by randomizing the RB-tree node comparison logic using SipHash with a secret key (inetpeer_hash_key) initialized via net_get_random_once(). Nodes are ordered in the tree by SipHash(addr, key) rather than raw IP addresses. Because the secret key is unknown to external entities, the tree layout and lookup traversal paths are unpredictable to off-path adversaries, breaking the deterministic eviction gadget. Cache the computed 64-bit SipHash (hash) in struct inet_peer and compute the target hash (dhash) once at the beginning of inet_getpeer() to avoid recomputing SipHash at every step of the RB-tree walk.

CVSS 3.1 · 9.4 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-92229

Forminator Forms <= 1.57.2 - Unauthenticated Arbitrary Shortcode Execution via 'current_url' Parameter

The The Forminator Forms – Contact Form, Payment Form & Custom Form Builder plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 1.57.2. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-90151

NFSv4: remove callback IDR entry on client allocation failure

In the Linux kernel, the following vulnerability has been resolved: NFSv4: remove callback IDR entry on client allocation failure nfs4_alloc_client() allocates an NFSv4.0 callback identifier before it finishes setting up the client. If any later initialization step fails, the error path frees the nfs_client directly with nfs_free_client(). That bypasses nfs_put_client(), which is where the callback IDR entry is removed during normal teardown. A failed allocation can therefore leave cb_ident_idr pointing at a freed nfs_client. A later NFSv4.0 callback lookup by cb_ident would find the stale pointer and take a reference to it. Make the callback IDR removal helper callable by the allocation failure path, and remove the callback identifier before freeing the client. This was found by a local static-analysis checker for publish-before-free lifetime bugs and confirmed by manual inspection.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-84064

IBM Guardium Data Protection is affected by multiple vulnerabilities.

IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to execute arbitrary SQL commands due to improper neutralization of special elements used in an SQL command.

CVSS 3.1 · 9.9 Critical EPSS < 1% KEV · Not listed
Vendors
Ibm
CVE-2026-63647

CordysCRM SSE Notification Stream Hijack via `/sse/subscribe`

CordysCRM is an open source AI-powered customer relationship management system that supports private deployment. Prior to 1.7.2, SseController exposes the anonymous /sse/subscribe, /sse/broadcast, and /sse/close endpoints because ShiroFilter.addPublicPathFilters permits the SSE paths, and the endpoints trust the caller-controlled userId instead of deriving an identity from an authenticated principal. An unauthenticated caller can use /sse/subscribe to read another user's workflow events, approval requests, mentions, and alerts, use /sse/broadcast to inject SYSTEM_HEARTBEAT messages into another user's stream, or use /sse/close to terminate another user's channel. This vulnerability is fixed in 1.7.2.

CVSS 4.0 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90414

IB/isert: reject PDUs declaring more data than was received

In the Linux kernel, the following vulnerability has been resolved: IB/isert: reject PDUs declaring more data than was received isert_recv_done() hands each received PDU to the opcode handlers without ever looking at wc->byte_len, the number of bytes the HCA actually placed in the receive descriptor. The handlers then copy that many bytes - the data-segment length the initiator declared in the BHS (ntoh24(hdr->dlength), via the derived unsol_data_len / imm_data_len) - out of the fixed-size descriptor: isert_handle_iscsi_dataout(): sg_copy_from_buffer(sg_start, sg_nents, isert_get_data(rx_desc), unsol_data_len); isert_handle_scsi_cmd(): sg_copy_from_buffer(cmd->se_cmd.t_data_sg, sg_nents, isert_get_data(rx_desc), imm_data_len); Because the declared length is never checked against wc->byte_len, an initiator can declare a data segment larger than the bytes it actually sent (and larger than the descriptor) and cause an out-of-bounds read of the receive buffer. Nothing upstream of isert closes this door: - __iscsit_check_dataout_hdr() bounds the inbound payload against conn_ops->MaxXmitDataSegmentLength (MXDSL) - a transmit parameter, used here for the inbound check. - iscsi_set_connection_parameters() sets ops->MaxXmitDataSegmentLength = ops->TargetRecvDataSegmentLength; and TARGETRECVDATASEGMENTLENGTH is absent from the min()-clamp list in iscsi_check_acceptor_state(), so the value the initiator declares is adopted verbatim (type range 512..16777215). The initiator effectively raises its own ceiling. - isert never clamps the negotiated value to its own fixed receive descriptor (ISER_RX_SIZE, 9216 bytes), so the target core's bound and the descriptor size are unrelated. The imm_data_len == data_len path is more than an over-read: it aliases the receive descriptor via sg_set_buf() and passes it to the backend as the data source for the SCSI WRITE, so an over-declared length causes heap contents past the descriptor to be written through the backend to the backing store. The backend is the victim of the oversized scatterlist isert hands it, not the cause; no read-back of the written bytes was demonstrated. Trigger: after login completes (full feature phase), an initiator that has declared a large TargetRecvDataSegmentLength and a FirstBurstLength that permits unsolicited/immediate data sends a PDU whose declared data-segment length exceeds what was received. With KASAN: BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 Read of size 4096 at addr ffff888109720800 by task kworker/1:0H/25 Workqueue: ib-comp-wq ib_cq_poll_work Call Trace: sg_copy_buffer+0x150/0x1c0 isert_recv_done+0xba6/0x2390 __ib_process_cq+0xe1/0x390 ib_cq_poll_work+0x46/0x150 isert_recv_done+0xba6 resolves to isert_handle_iscsi_dataout() (ib_isert.c:1160), inlined through isert_rx_opcode(). Validate wc->byte_len against the framing in isert_recv_done() before the PDU reaches any handler, and reinstate the connection if it is short. Because the test compares without subtracting the header length, it also rejects PDUs shorter than the iSER and iSCSI headers, which would otherwise be parsed out of stale descriptor contents. The login handler rejects PDUs shorter than ISER_HEADERS_LEN (commit 29e7b925ae6d ("IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN")) but does not bound the declared length either; that is fixed in the next patch. The data handlers had no length check at all. isert reads the data segment from a fixed offset: isert_get_data() returns the iSER header plus ISER_HEADERS_LEN and makes no adjustment for an AHS. The bytes the handlers touch are therefore exactly [ISER_HEADERS_LEN, ISER_HEADERS_LEN + dlength), and comparing that sum against wc->byte_len bounds precisely the region that is read. An AHS term would only make the test stricter without bounding anything furth ---truncated---

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-78030

DBI versions before 1.653 for Perl load arbitrary modules via unvalidated dbm_type and dbm_mldbm attributes in DBD::DBM

DBI versions before 1.653 for Perl load arbitrary modules via unvalidated dbm_type and dbm_mldbm attributes in DBD::DBM. DBD::DBM passes the dbm_type and dbm_mldbm connect attributes to require without checking that the value names a module. require treats a path-shaped string as a literal filename and does not consult @INC, so the attribute chooses the file that Perl loads and runs. The MLDBM::Serializer:: prefix that DBD::DBM prepends to dbm_mldbm is not a boundary: only the :: separators are rewritten to /, so a value containing / traverses out of the serializer directory. The value is also assigned to $MLDBM::Serializer, which MLDBM requires the same way when it ties the table. A caller that lets an untrusted party influence either attribute, for example through a DSN fragment or a parameter that selects a storage backend, runs the file-scope code of whatever module the value names. For example, my $dsn = "dbi:DBM:f_dir=/var/db;dbm_type=../../Untrusted.pm" my $dbh = DBI->connect( $dsn ); Note that DBD::Gofer forwards connect attributes to the server side, and DBI::ProxyServer checks only that a DSN starts with a driver prefix.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
Dbi
CVE-2026-90230

nvmet: fix heap out-of-bounds read in nvmet_auth_negotiate()

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix heap out-of-bounds read in nvmet_auth_negotiate() nvmet_execute_auth_send() allocates the DH-HMAC-CHAP message buffer with the host-supplied transfer length (tl) and hands it to nvmet_auth_negotiate() without passing tl along. nvmet_auth_negotiate() then reads the negotiate header and, for each of the halen hash identifiers and dhlen DH group identifiers, indexes into the fixed idlist[60] array (hashes at idlist[0..halen), groups at idlist[30..]). Neither the transfer length nor halen/dhlen is validated. A malicious or non-conformant host can report a tl smaller than the negotiate structure, or a halen/dhlen larger than the array (both are u8, up to 255), making the loops read past the end of the allocated buffer (heap out-of-bounds read). The sibling nvmet_auth_reply() already validates tl against the structure size; the negotiate path did not. Pass tl into nvmet_auth_negotiate(), reject a tl that does not cover the negotiate data plus one full protocol descriptor, and reject halen/dhlen larger than NVME_AUTH_DHCHAP_MAX_DH_IDS.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-84073

IBM Guardium Data Protection is affected by multiple vulnerabilities.

IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to execute arbitrary SQL commands due to improper neutralization of special elements used in an SQL command.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Ibm
CVE-2026-84082

IBM Guardium Data Protection is affected by multiple vulnerabilities.

IBM Guardium Data Protection 12.2 could allow a remote attacker to execute arbitrary SQL commands due to improper neutralization of special elements used in an SQL command.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Ibm
CVE-2026-93868

Cotonti through 1.0.0 Predictable Password Recovery Token via Weak PRNG

Cotonti through 1.0.0 derives password recovery validation tokens from md5(microtime()) in users.passrecover.php, creating a predictable token space of approximately one million values per second. Unauthenticated attackers can read the server Date header, precompute candidate tokens within a narrow time window, and probe them against the passrecover authentication endpoint to reset any account password including administrators.

CVSS 4.0 · 9.2 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-84434

Gravity Forms <= 3.1.0.4 - Unauthenticated Arbitrary File Upload via Hidden File Upload Field

The Gravity Forms plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 3.1.0.4 via the upload_file function. This is due to a mismatch between the field validation pipeline and the file persistence pipeline, where hidden file upload fields bypass extension validation and a rejected file's intact upload state is later passed to upload_file() without re-validation. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. Exploitation requires the targeted form to contain a File Upload field with its Visibility set to 'Hidden'; the vulnerability is reachable by unauthenticated attackers on any publicly accessible form meeting this condition.

CVSS 3.1 · 9.8 Critical EPSS 3.9% KEV · Not listed
CVE-2026-89274

WP Recipe Maker <= 10.8.1 - Unauthenticated Arbitrary Shortcode Execution via Recipe Comment Content

The WP Recipe Maker plugin for WordPress is vulnerable to Arbitrary Shortcode Execution in all versions up to, and including, 10.8.1. The vulnerability exists because `WPRM_Metadata::sanitize_metadata()` recursively calls `do_shortcode()` on every scalar field of the recipe's structured metadata array — including the `reviewBody` field, which is populated verbatim from the `comment_content` of approved `wprm-comment-rating` comments — without sanitizing or stripping shortcode tokens before execution; the subsequent `wp_strip_all_tags()` and `strip_shortcodes()` calls operate only on the output string after execution has already fully occurred, providing no protection against server-side shortcode invocation. This makes it possible for unauthenticated attackers to execute arbitrary registered WordPress shortcodes server-side on every recipe page render, causing shortcode output — such as attachment captions, private post fields, or other data exposed by installed shortcodes — to be embedded in the page's JSON-LD `reviewBody` metadata and disclosed to all visitors who load the recipe page. Successful exploitation requires the attacker's rated comment to pass the site's comment approval threshold, either via auto-approval or moderator action, before the injected shortcode begins executing on page loads.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
CVE-2026-84078

IBM Guardium Data Protection is affected by multiple vulnerabilities.

IBM Guardium Data Protection 12.2 is vulnerable to a missing authentication vulnerability in the LoadBalancerServlet. An unauthenticated user can access privileged load-balancer operations, potentially resulting in unauthorized actions and impact to the integrity and availability of the affected system.

CVSS 3.1 · 9.9 Critical EPSS < 1% KEV · Not listed
Vendors
Ibm
CVE-2026-20306

Cisco Identity Services Engine Command Injection Vulnerability

A vulnerability in the REST API of Cisco ISE and ISE-PIC could allow an authenticated, remote attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the device and elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a DoS condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored.

CVSS 3.1 · 9.1 Critical EPSS 1.6% KEV · Not listed
Vendors
CVE-2026-20305

Cisco Identity Services Engine Command Injection Vulnerability

A vulnerability in the diagnostic tools of Cisco ISE and ISE-PIC could allow an authenticated, remote attacker to perform command injection attacks on the underlying operating system and elevate privileges to&nbsp;root. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the device and elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored.

CVSS 3.1 · 9.1 Critical EPSS 1.6% KEV · Not listed
Vendors
CVE-2026-20307

Cisco Identity Services Engine Remote Code Execution Vulnerability

A vulnerability in the web-based management interface of Cisco ISE could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have at least low-privileged administrative credentials. This vulnerability is due to insecure deserialization of a user-supplied Java byte stream. An attacker could exploit this vulnerability by sending a crafted serialized Java object to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the device and elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored.

CVSS 3.1 · 9.9 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-76420

Cisco Secure Firewall Management Center Software Impersonated sftunnel Connection Vulnerability

A vulnerability in the internal configuration of the Apache JServ Protocol (AJP)&nbsp;connector for Cisco Secure FMC Software could allow an unauthenticated, remote attacker to impersonate a peer device. This vulnerability is due to incorrect initialization of encryption parameters for the AJP connector at boot time. An attacker could exploit this vulnerability by sending crafted packets to the AJP connector. A&nbsp;successful exploit could allow the attacker to execute commands as root and&nbsp;gain full control over the FMC REST APIs on the affected device. Note: This vulnerability can be exploited only if the valid sftunnel connection between Cisco Secure FMC Software and Cisco Secure FTD Software is down.

CVSS 3.1 · 9 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-20331

Cisco Secure Adaptive Security Appliance Software, Secure Firewall Threat Defense Software and Secure Firewall Management Center Software Hardening Release - Protection Mechanism Failure Vulnerabilities

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Adaptive Security Appliance Software, Cisco Secure Firewall Threat Defense Software and Cisco Secure Firewall Management Center Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. &nbsp; The vulnerabilities tracked by CVE-2026-20331 are related to the failure of protection mechanisms issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-693.

CVE-2026-20329

Cisco Secure Adaptive Security Appliance Software, Secure Firewall Threat Defense Software and Secure Firewall Management Center Software Hardening Release - Exceptional Conditions Handling Vulnerabilities

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Adaptive Security Appliance Software, Cisco Secure Firewall Threat Defense Software and Cisco Secure Firewall Management Center Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. &nbsp; The vulnerabilities tracked by CVE-2026-20329 are related to issues concerning improper handling of exceptional conditions that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-703.

CVSS 3.1 · 9.9 Critical EPSS < 1% KEV · Not listed
Vendors