| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent client use-after-free during blocked-lock reaping
A bare lock owner -- its only remaining reference a blocked lock on
nn->blocked_locks_lru -- holds a raw pointer to its nfs4_client but
no reference keeping the client alive. When the per-net laundromat
reaps such a lock, freeing the nbl drops the owner reference
held through flc_owner, and the final nfs4_put_stateowner()
takes the client's cl_lock. Because the laundromat detaches the
nbl first, __destroy_client() no longer finds it, so a concurrent
force_expire_client() can free the client before nfs4_put_stateowner()
runs, dereferencing cl_lock in freed memory.
Pin the client with cl_rpc_users before dropping
nn->blocked_locks_lock, and skip clients already expiring, whose
blocked locks __destroy_client() frees while holding an owner
reference. Take nn->client_lock outside nn->blocked_locks_lock.
Every other site holds nn->blocked_locks_lock as a leaf, acquiring
no further lock, so placing nn->client_lock outside it cannot form
a lock-order cycle. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: displayport: Fix OOB altmode array index
The UCSI displayport driver indexes the connector's port altmode array
with the GET_CURRENT_CAM response after checking it is not 0xff. The
port altmode array is UCSI_MAX_ALTMODES elements long. If the PPM
returns an invalid GET_CURRENT_CAM response above UCSI_MAX_ALTMODES and
not equal to 0xff, the kernel may crash with an array index OOB error.
Update the UCSI displayport driver to verify the current cam is less
than UCSI_MAX_ALTMODES before accessing the port altmode array. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie()
rtw_restruct_wmm_ie() scans in_ie for a WMM IE with:
while (i < in_len) {
...
if (i + 5 < in_len && in_ie[i] == 0xDD && ...) {
...
break;
}
i += (in_ie[i + 1] + 2); /* to the next IE element */
}
When the "i + 5 < in_len" match check fails simply because i is
within 5 bytes of the end of the buffer (i.e. no WMM IE was found
near the tail of in_ie), execution falls through to
"i += (in_ie[i + 1] + 2)", which reads in_ie[i + 1]. If i == in_len
- 1 at that point, this is a 1-byte out-of-bounds read of an
attacker-influenced IE buffer built from association/scan data.
Commit a75281626fc8f ("staging: rtl8723bs: fix potential
out-of-bounds read in rtw_restruct_wmm_ie") added the "i + 5 <
in_len" guard to the match condition itself, but did not add an
equivalent guard before the fallthrough advance, so the same class
of OOB read remained reachable through the non-matching path.
Add an explicit bounds check before advancing to the next IE. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Take trace_array reference when opening options file
The options files do not take the trace_array reference for the options
they represent. This could cause a use-after-free kernel crash if one of
these files is opened by one task and another task removes the instance
that the option is for. Because it doesn't take a reference upon opening,
it will not stop the removal which will free the options descriptor that
is being used.
As the options are somewhat dynamic in their creation at boot up, each
file represents a flag in the trace_array. The trace_array has an array of
indexes to represent each of these flags that is stored in the
trace_flags_index array. The address of the index array element is used to
pass to the inode->i_private pointer. Then that element is read which
holds the index (which represents the flag) and then the index is used to
calculate the trace_array descriptor from its trace_flags_index array.
One issue is that the index element can not be referenced until the
trace_array's reference is taken. To handle this, create a new helper
function called: trace_array_options_get() that will iterate all the
existing trace_arrays in the ftrace_trace_arrays list (under the
trace_types_lock), and compare the passed in address of the index element
with the entire array of the trace_array's trace_flags_index array.
If it matches, then up the corresponding trace_array's reference and
return. |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes: Protect kprobe_blacklist with RCU
__within_kprobe_blacklist() traverses kprobe_blacklist without holding
kprobe_mutex. When a module is unloaded, kprobe_remove_area_blacklist()
removes blacklist entries and immediately frees them with kfree().
A concurrent call to within_kprobe_blacklist() can therefore dereference
freed memory.
Furthermore, within_kprobe_blacklist() can be called in atomic or
non-preemptible contexts where the sleeping kprobe_mutex cannot be taken.
Protect kprobe_blacklist with RCU. Use guard(rcu)() and
list_for_each_entry_rcu() for traversal, list_add_tail_rcu() for
insertions, list_del_rcu() for deletions, and kfree_rcu() to reclaim
entries safely after a grace period. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Fix race between non-atomic ops and trigger-start
We protect the races of the concurrent state transitions between
atomic PCM ops, but the checks between the non-atomic ops (hw_params,
hw_free and prepare) and the atomic ops aren't perfect; there is a
check of the conflicting PCM state at the beginning of hw_params & co,
but the atomic PCM ops can be still issued during the non-atomic PCM
operations. An example such scenario is that a thread A re-issues the
PREPARE or HW_PARAMS for the already prepared stream, while another
thread B triggers the PCM start in the middle of the prepare
operation. Although this usually doesn't lead to much serious issues,
it can give some inconsistency as reported by syzkaller (such as
ODEBUG warning).
There are various atomic PCM ops, and basically the only problem is
the PCM start as it operates from the PREPARED state. Other trigger
commands (stop, etc) are for the running or the other special state,
hence they are filtered as pre-condition.
This patch is for preventing the PCM trigger-start during the non-
atomic operations in order to address the problems above.
Fortunately, the hw_params, hw_free and prepare operations call
snd_pcm_buffer_access_lock(), and this can be used for checking the
concurrent operations at the PCM trigger -- which sets the
runtime->buffer_accessing to a negative (if possible), so the PCM
trigger just needs to check the runtime->buffer_accessing value; if
it's negative, it means the concurrent non-atomic PCM ops is running. |
| reNgine through 2.2.0 contains an authorization bypass vulnerability in the GetFileContents API endpoint that allows any authenticated user to read bundled recon tool configuration files. Attackers with low-privilege Auditor roles can access files containing third-party API keys for services like SecurityTrails, Shodan, Censys, VirusTotal, BinaryEdge and Hunter by querying the endpoint without role-based permission checks. |
| Hippo4j through 1.5.0 contains a server-side request forgery vulnerability in four ThreadPoolController endpoints that fail to validate the clientAddress parameter. Authenticated attackers can supply arbitrary hostnames and ports to trigger outbound GET requests to internal networks and cloud metadata services. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: reject unsolicited H2CData PDUs
nvmet_tcp_handle_h2c_data_pdu() accepts an H2CData PDU after only checking
that its TTAG is a valid in-range command index and that the command's
data buffers are mapped. It never checks that the target has actually
solicited that data by sending an R2T for the command.
A remote host can abuse this. It submits a write command that takes the
R2T path and, before the target transmits the R2T, sends an H2CData PDU
for that command's tag. The data completes the command early, and when
the command then fails synchronously (e.g. a length mismatch caught by
nvmet_check_transfer_len()), it is completed a second time. Each
completion calls nvmet_tcp_queue_response(), so the same command is added
to queue->resp_list twice while it is still linked; the second llist_add()
makes the node point to itself (lentry->next == lentry).
nvmet_tcp_process_resp_list() then walks that self-referential node and
adds the command to resp_send_list twice. With CONFIG_DEBUG_LIST this
trips the "list_add double add" check (kernel BUG); without it the loop
never terminates and the nvmet_tcp workqueue wedges (soft-lockup). It is
remotely triggerable and needs no authentication on an allow_any_host
subsystem.
Track whether an R2T has been transmitted for a command and reject an
H2CData PDU that arrives before it. The flag is cleared on command reuse
(nvmet_tcp_get_cmd() zeroes cmd->flags) and stays set across the multiple
H2CData PDUs of a single solicited transfer. |
| Rallly before 4.15.0 contains an information disclosure vulnerability in the polls.get tRPC procedure that returns scheduled-event invitee names and email addresses to unauthenticated callers. Attackers can access a poll's urlId from public invite links to retrieve sensitive invitee information regardless of privacy settings. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix hot-unplug skipped when last AP adapter or domain removed
The vfio_ap_mdev_hot_unplug_cfg() function uses the return value of
bitmap_andnot() to determine whether the guest APCB needs to be updated.
However, bitmap_andnot() returns false when the resulting destination
bitmap is empty. This means that if the only adapter, domain or control
domain assigned to an mdev is removed from the host's AP configuration,
the bit is correctly cleared from the shadow APCB, but bitmap_andnot()
returns false because the result is an empty bitmap. Consequently,
do_hotplug remains 0 and vfio_ap_mdev_update_guest_apcb() is never called,
leaving the KVM guest with stale hardware access to the unplugged AP
devices.
Fix this by replacing the bitmap_andnot() return value check with
bitmap_intersects() to determine whether the shadow APCB actually
overlaps with the removal mask. If there is an intersection, call
bitmap_andnot() solely for its side effect of clearing the bits, then
unconditionally set do_hotplug to trigger the guest APCB update. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Take srcu when importing watchpoint data
__import_wp_info() backs up the original guest memory contents of a
watchpoint with read_guest_abs(), which is kvm_read_guest() and therefore
resolves the memslot via __kvm_memslots(). That requires kvm->srcu (or
kvm->slots_lock) to be held, otherwise a concurrent memslot update can
free the memslots array under us once its SRCU grace period has elapsed.
As this is not fast path, following lock ordering (mutex first, then
srcu) take the big hammer and hold the srcu for the full import. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: keyop: use mmu_lock to read gmap->asce
Every other dat_* consumer in this file (kvm_s390_get_skeys,
set_skeys, get_cmma_bits, set_cmma_bits, MEM_CLR_CMMA,
kvm_s390_fixup_prefix, kvm_test_age_gfn, kvm_age_gfn) reads
kvm->arch.gmap->asce *inside* the mmu_lock read-side. keyop is the only
outlier.
gmap->asce is mutated under write_lock(mmu_lock) by gmap_set_limit()
and keyop might use a stale asce value for walking as KVM_S390_KEYOP
and KVM_S390_VM_MEM_LIMIT_SIZE can run concurrently. This can result
in memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix acpi_package_ids[] array overflow
With LoongArch virt machine, a typical setting is one core per socket,
there will max 256 sockets (packages) on one VM. With PPTT acpi table,
array acpi_package_ids[] will be overflowed.
Here change the array size of acpi_package_ids[] with the max value of
MAX_PACKAGES and KVM_MAX_VCPUS. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rkvdec: hevc: guard INTER_REF_PIC_SET_PRED index underflow
st_ref_pic_set_prediction() computes the reference RPS index as
st_rps_idx - (delta_idx_minus1 + 1) per HEVC spec equation 7-59.
Both operands are u8, so when delta_idx_minus1 + 1 exceeds the
current index the subtraction wraps and the subsequent array access
at calculated_rps_st_sets[ref_rps_idx] reads far out of bounds.
A userspace V4L2 client that can open the RKVDEC m2m decoder can
submit an EXT_SPS_ST_RPS control with INTER_REF_PIC_SET_PRED set
and delta_idx_minus1 crafted to trigger the underflow.
Reject the entry early when the reference index would underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
media: zoran: Avoid freeing a registered video_device twice
zoran_init_video_device() installs zoran_vdev_release() as the
video_device release callback through zoran_template. After
video_register_device() succeeds, video_unregister_device() drops the
registered video_device reference and the V4L2 core eventually invokes
that release callback, which kfree()s the video_device.
zoran_exit_video_devices() called video_unregister_device() and then
kfree(zr->video_dev), so device teardown could free the same
video_device twice.
Remove the direct kfree() and clear the cached pointer after
unregistering. The pre-registration failure path keeps its manual free
because the video_device was not registered there.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| CVE ID reserved in error and not assigned to a vulnerability. The correct CVE ID is CVE-2026-92574. |
| A stored cross-site scripting (XSS) vulnerability in Bynder before 12 January 2026 allows attackers to execute arbitrary web scripts or HTML via a crafted payload. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. Connecting to a malicious NFS server may cause unexpected system termination or corrupt kernel memory. |
| Privilege escalation due to incorrect boundary conditions in the Graphics: WebRender component. This vulnerability was fixed in Firefox 156, Firefox ESR 115.41, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
