| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ptp_s390: Add missing facility check
Only register the physical clock when facility 28 is installed
and PTFF QAF returns that PTFF QPT is available. |
| In the Linux kernel, the following vulnerability has been resolved:
rtase: Workaround for TX hang caused by hardware packet parsing
The hardware performs packet parsing before packet transmission.
Parsing incomplete IPv4, IPv6, TCP, or UDP headers may trigger a TX
hang because the hardware parser expects additional protocol header
data that is not present in the packet.
The hardware performs additional PTP parsing on UDP packets identified
by destination ports 319/320 at the expected UDP destination port
offset.
If such a packet has transport data smaller than RTASE_MIN_PAD_LEN,
the hardware parser expects additional packet data and may trigger a
TX hang.
To avoid these hardware issues, the driver applies the following
workarounds.
Drop malformed packets that may trigger this hardware issue before
transmission.
For IPv4 non-initial fragments, the hardware does not check the
fragment offset before parsing the expected transport header location.
As a result, these packets are still subject to transport header
parsing even though they do not contain a transport header. If the
transport data is shorter than the minimum transport header required
by the hardware parser, pad the transport data to the minimum
transport header length required by the hardware parser. Packets that
also match the hardware PTP parsing conditions continue to follow the
corresponding workaround.
For IPv6 fragmented packets, neither of the above hardware issues
occurs because the hardware only continues packet parsing when the
IPv6 Base Header Next Header field directly indicates UDP. Packets
carrying a Fragment Header do not continue through the subsequent
packet parsing stages.
For packets identified for hardware PTP parsing, pad the transport
data so it reaches RTASE_MIN_PAD_LEN before transmission. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: initialize standalone TCP-AO response padding
tcp_v4_send_ack() and tcp_v6_send_response() construct standalone TCP
responses with TCP-AO options. The option length carries the actual MAC
length, but the TCP header length includes the option rounded up to a
four-byte boundary.
tcp_ao_hash_hdr() writes the MAC only. Thus, when the MAC length is not
four-byte aligned, the one to three bytes after the MAC are left
uninitialized and may be transmitted. For the normal TCP-AO hashing
mode, those bytes also have to be initialized before computing the MAC.
Initialize only the alignment padding in the TCP-AO branches, before
hashing the header. Use TCPOPT_NOP, as in the normal TCP-AO output path.
This avoids adding work to non-AO TCP responses while preserving a valid
authenticated header. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix path resolution in ksmbd_vfs_kern_path_create
The SMB2 open lookup is rooted at the share with LOOKUP_BENEATH, but the
create/mkdir/hardlink sink is not: ksmbd_vfs_kern_path_create() builds an
absolute path with convert_to_unix_name() and resolves it from AT_FDCWD
via start_creating_path(), so a ".." component is walked from the real
filesystem root and escapes the export.
An authenticated client races a missing path component so the rooted open
lookup returns -ENOENT (taking the create branch) while the same component
is present (a directory) when the create walk runs; the create then
resolves ".." out of the share.
Root the create walk at the share like the lookup and rename paths already
are: resolve the parent with vfs_path_parent_lookup(..., LOOKUP_BENEATH,
&share_conf->vfs_path) and create the final component with
start_creating_noperm(). convert_to_unix_name() then has no callers and is
removed. |
| Improper input validation in Samsung Plus TV prior to version 1.0.28.6 allows remote attackers to access sensitive information. |
| Improper input validation in Samsung Android USB Driver for Windows prior to version 1.9.5.0 allows local attacker to access out-of-bounds memory. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm_dev_release() uses plain kfree() to free chip->auth, which contains
sensitive cryptographic material including HMAC session keys, nonces,
and passphrase data (struct tpm2_auth).
Every other code path that frees this structure uses kfree_sensitive()
to zero the memory before releasing it: both tpm2_end_auth_session()
and tpm_buf_check_hmac_response() do so. The tpm_dev_release() path
is the only one that does not, leaving key material in freed slab
memory until it is eventually overwritten.
Use kfree_sensitive() for consistency with the rest of the driver and
to ensure session keys are scrubbed during device teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: clear waitid info before copying it to userspace
IORING_OP_WAITID stores its result fields in struct io_waitid::info and
later copies them to userspace siginfo. The prep path initializes the
request arguments, but it does not initialize info itself.
If the wait operation completes without reporting a child event, the common
wait code can return without writing wo_info. In that case io_waitid_finish()
still copies iw->info to userspace, exposing stale bytes from the reused
io_kiocb command storage.
Clear the result storage during prep so the io_uring path matches the
regular waitid syscall, which uses a zero-initialized struct waitid_info. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: fix access mode flags being ORed instead of replaced
Since commit 1f3e4142c0eb ("9p: convert to the new mount API"),
v9fs_apply_options() applies parsed mount flags with |= onto flags
already set by v9fs_session_init(). For 9P2000.L, session_init sets
V9FS_ACCESS_CLIENT as the default, so when the user mounts with
"access=user", both bits end up set. Access mode checks compare
against exact values, so having both bits set matches neither mode.
This causes v9fs_fid_lookup() to fall through to the default switch
case, using INVALID_UID (nobody/65534) instead of current_fsuid()
for all fid lookups. Root is then unable to chown or perform other
privileged operations.
Fix by clearing the access mask before applying the user's choice. |
| Vulnerability in the Oracle WebCenter Sites product of Oracle Fusion Middleware (component: WebCenter Sites). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle WebCenter Sites. Successful attacks of this vulnerability can result in takeover of Oracle WebCenter Sites. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Vulnerability in the Oracle Enterprise Manager Base Platform product of Oracle Enterprise Manager (component: Metadata Plugin). Supported versions that are affected are 13.5 and 24.1. Easily exploitable vulnerability allows low privileged attacker with network access via HTTPS to compromise Oracle Enterprise Manager Base Platform. While the vulnerability is in Oracle Enterprise Manager Base Platform, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Enterprise Manager Base Platform. CVSS 3.1 Base Score 9.9 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in the Oracle Enterprise Manager Base Platform product of Oracle Enterprise Manager (component: Install). Supported versions that are affected are 13.5 and 24.1. Easily exploitable vulnerability allows high privileged attacker with network access via HTTPS to compromise Oracle Enterprise Manager Base Platform. While the vulnerability is in Oracle Enterprise Manager Base Platform, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Enterprise Manager Base Platform accessible data as well as unauthorized read access to a subset of Oracle Enterprise Manager Base Platform accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Enterprise Manager Base Platform. CVSS 3.1 Base Score 9.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:L/I:H/A:H). |
| Vulnerability in the Oracle iSupport product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle iSupport. While the vulnerability is in Oracle iSupport, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle iSupport. CVSS 3.1 Base Score 9.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in the Oracle iSupport product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle iSupport. While the vulnerability is in Oracle iSupport, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle iSupport. CVSS 3.1 Base Score 9.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H). |
| Unauthenticated Cross Site Scripting (XSS) in Welcart e-Commerce <= 2.11.31 versions. |
| Subscriber Broken Access Control in Tourfic <= 2.23.1 versions. |
| Unauthenticated Arbitrary Code Execution in WP BASE Booking <= 6.3.0 versions. |
| Parsing an invalid SVCB or HTTPS RR can panic when the size of a parameter value overflows the message buffer. |
