| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Out-of-Bounds
Read vulnerability exists in the ASUS Business System
Control Interface driver. This vulnerability can be triggered by an unprivileged local user
sending a specially crafted IOCTL request, potentially leading
to a disclosure of
kernel information or a system crash. Refer to the "Security Update for ASUS
Business System Control Interface" section on the ASUS Security Advisory for more information. |
| A vulnerability was detected in D-Link DIR-513 1.10. The impacted element is an unknown function of the file /goform/formEasySetupWizard3. The manipulation of the argument wan_connected results in stack-based buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 16.11 before 18.7.6, 18.8 before 18.8.6, and 18.9 before 18.9.2 that could have allowed an unauthenticated user to cause a denial of service condition due to improper input validation when processing specially crafted JSON payloads in the protected branches API. |
| A vulnerability in the Intermediate System-to-Intermediate System (IS-IS) multi-instance routing feature of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the IS-IS process to restart unexpectedly.
This vulnerability is due to insufficient input validation of ingress IS-IS packets. An attacker could exploit this vulnerability by sending crafted IS-IS packets to an affected device after forming an adjacency. A successful exploit could allow the attacker to cause the IS-IS process to restart unexpectedly, resulting in a temporary loss of connectivity to advertised networks and a denial of service (DoS) condition.
Note: The IS-IS protocol is a routing protocol. To exploit this vulnerability, an attacker must be Layer 2-adjacent to the affected device and must have formed an adjacency. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-16 and 6.9.13-41, an overflow on 32-bit systems can cause a crash in the SFW decoder when processing extremely large images. This vulnerability is fixed in 7.1.2-16 and 6.9.13-41. |
| cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to 0.37.1, when a cpp-httplib client uses the streaming API (httplib::stream::Get, httplib::stream::Post, etc.), the library calls std::stoull() directly on the Content-Length header value received from the server with no input validation and no exception handling. std::stoull throws std::invalid_argument for non-numeric strings and std::out_of_range for values exceeding ULLONG_MAX. Since nothing catches these exceptions, the C++ runtime calls std::terminate(), which kills the process with SIGABRT. Any server the client connects to — including servers reached via HTTP redirects, third-party APIs, or man-in-the-middle positions can crash the client application with a single HTTP response. No authentication is required. No interaction from the end user is required. The crash is deterministic and immediate. This vulnerability is fixed in 0.37.1. |
| Easy Grade Pro 4.1.0.2 contains a file parsing logic flaw in the handling of proprietary .EGP gradebook files. By modifying specific fields at precise offsets within an otherwise valid .EGP file, an attacker can trigger an out-of-bounds memory read during parsing. This results in an unhandled access violation and application crash, leading to a local denial-of-service condition when the crafted file is opened by a user. |
| A vulnerability has been found in TP-Link TL-WR841N v11, TL-WR842ND v2 and TL-WR494N v3. The vulnerability exists in the /userRpm/WlanNetworkRpm.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer. |
| A flaw was found in the libssh library in versions less than 0.11.2. An out-of-bounds read can be triggered in the sftp_handle function due to an incorrect comparison check that permits the function to access memory beyond the valid handle list and to return an invalid pointer, which is used in further processing. This vulnerability allows an authenticated remote attacker to potentially read unintended memory regions, exposing sensitive information or affect service behavior. |
| There is a Stack overflow Vulnerability in the device Search and Discovery feature of Hikvision Access Control Products. If exploited, an attacker on the same local area network (LAN) could cause the device to malfunction by sending specially crafted packets to an unpatched device. |
| Delta Electronics CNCSoft-G2 lacks proper validation of the user-supplied file. If a user opens a malicious file, an attacker can leverage this vulnerability to execute code in the context of the current process. |
| A flaw was found in uv. This vulnerability allows an attacker to execute malicious code during package resolution or installation via specially crafted ZIP (Zipped Information Package) archives that exploit parsing differentials, requiring user interaction to install an attacker-controlled package. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix early read unlock of page with EOF in middle
The read result collection for buffered reads seems to run ahead of the
completion of subrequests under some circumstances, as can be seen in the
following log snippet:
9p_client_res: client 18446612686390831168 response P9_TREAD tag 0 err 0
...
netfs_sreq: R=00001b55[1] DOWN TERM f=192 s=0 5fb2/5fb2 s=5 e=0
...
netfs_collect_folio: R=00001b55 ix=00004 r=4000-5000 t=4000/5fb2
netfs_folio: i=157f3 ix=00004-00004 read-done
netfs_folio: i=157f3 ix=00004-00004 read-unlock
netfs_collect_folio: R=00001b55 ix=00005 r=5000-5fb2 t=5000/5fb2
netfs_folio: i=157f3 ix=00005-00005 read-done
netfs_folio: i=157f3 ix=00005-00005 read-unlock
...
netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff
netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=c
netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff
netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=8
...
netfs_sreq: R=00001b55[2] ZERO SUBMT f=000 s=5fb2 0/4e s=0 e=0
netfs_sreq: R=00001b55[2] ZERO TERM f=102 s=5fb2 4e/4e s=5 e=0
The 'cto=5fb2' indicates the collected file pos we've collected results to
so far - but we still have 0x4e more bytes to go - so we shouldn't have
collected folio ix=00005 yet. The 'ZERO' subreq that clears the tail
happens after we unlock the folio, allowing the application to see the
uncleared tail through mmap.
The problem is that netfs_read_unlock_folios() will unlock a folio in which
the amount of read results collected hits EOF position - but the ZERO
subreq lies beyond that and so happens after.
Fix this by changing the end check to always be the end of the folio and
never the end of the file.
In the future, I should look at clearing to the end of the folio here rather
than adding a ZERO subreq to do this. On the other hand, the ZERO subreq can
run in parallel with an async READ subreq. Further, the ZERO subreq may still
be necessary to, say, handle extents in a ceph file that don't have any
backing store and are thus implicitly all zeros.
This can be reproduced by creating a file, the size of which doesn't align
to a page boundary, e.g. 24998 (0x5fb2) bytes and then doing something
like:
xfs_io -c "mmap -r 0 0x6000" -c "madvise -d 0 0x6000" \
-c "mread -v 0 0x6000" /xfstest.test/x
The last 0x4e bytes should all be 00, but if the tail hasn't been cleared
yet, you may see rubbish there. This can be reproduced with kafs by
modifying the kernel to disable the call to netfs_read_subreq_progress()
and to stop afs_issue_read() from doing the async call for NETFS_READAHEAD.
Reproduction can be made easier by inserting an mdelay(100) in
netfs_issue_read() for the ZERO-subreq case.
AFS and CIFS are normally unlikely to show this as they dispatch READ ops
asynchronously, which allows the ZERO-subreq to finish first. 9P's READ op is
completely synchronous, so the ZERO-subreq will always happen after. It isn't
seen all the time, though, because the collection may be done in a worker
thread. |
| Aircompressor is a library with ports of the Snappy, LZO, LZ4, and Zstandard compression algorithms to Java. In versions 3.3 and below, incorrect handling of malformed data in Java-based decompressor implementations for Snappy and LZ4 allow remote attackers to read previous buffer contents via crafted compressed input. With certain crafted compressed inputs, elements from the output buffer can end up in the uncompressed output, potentially leaking sensitive data. This is relevant for applications that reuse the same output buffer to uncompress multiple inputs. This can be the case of a web server that allocates a fix-sized buffer for performance purposes. There is similar vulnerability in GHSA-cmp6-m4wj-q63q. This issue is fixed in version 3.4. |
| A stack-based buffer overflow exists in the get_merge_ipaddr function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function concatenates up to four user-supplied CGI parameters matching <parameter>_0~3 into a fixed-size buffer (a2) without bounds checking. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication. |
| The gst_asf_demux_process_ext_stream_props function in gst/asfdemux/gstasfdemux.c in gst-plugins-ugly in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (invalid memory read and crash) via vectors related to the number of languages in a video file. |
| DOS / potential heap overwrite in mkv demuxing using zlib decompression. Integer overflow in matroskademux element in gst_matroska_decompress_data function which causes a segfault, or could cause a heap overwrite, depending on libc and OS. Depending on the libc used, and the underlying OS capabilities, it could be just a segfault or a heap overwrite. If the libc uses mmap for large chunks, and the OS supports mmap, then it is just a segfault (because the realloc before the integer overflow will use mremap to reduce the size of the chunk, and it will start to write to unmapped memory). However, if using a libc implementation that does not use mmap, or if the OS does not support mmap while using libc, then this could result in a heap overwrite. |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference has been discovered in the id3v2_read_synch_uint function, located in id3v2.c. If id3v2_read_synch_uint is called with a null work->hdr.frame_data, the pointer guint8 *data is accessed without validation, resulting in a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10. |
| DOS / potential heap overwrite in mkv demuxing using bzip decompression. Integer overflow in matroskademux element in bzip decompression function which causes a segfault, or could cause a heap overwrite, depending on libc and OS. Depending on the libc used, and the underlying OS capabilities, it could be just a segfault or a heap overwrite. If the libc uses mmap for large chunks, and the OS supports mmap, then it is just a segfault (because the realloc before the integer overflow will use mremap to reduce the size of the chunk, and it will start to write to unmapped memory). However, if using a libc implementation that does not use mmap, or if the OS does not support mmap while using libc, then this could result in a heap overwrite. |
| In GStreamer through 1.26.1, the subparse plugin's parse_subrip_time function may write data past the bounds of a stack buffer, leading to a crash. |
